

1 Control Panel 2 Oven Seal 3 Grill Element 4 Grid tray 5 Tray supports 6 Baking tray 7 Deep tray 8 Door switch 9 Hinge 1O Door 11 Air outlet 12 Door switch-lock 13 Cabinet Mounting 14 Grill Screen 15 Smoke Outlet 16 Back Wall Panel 17 Side lights 18 Fan 19 Full size interior glass

1 2 3 4 5 6 7 8 9
11 Cooking functions
17 Electronic timer Touch sensor
12 Temperature display
18 – Touch sensor
13 Door lock indicator light
19 + Touch sensor / Child safety function
14 Pyrolytic function indicator display
10 On / Off Touch sensor
15 Electronic timer
16 Temperature Touch sensor
12 Pyrolytic function sensor
11 12 10 · 11 Inside light

Conventional This function is for use when baking cakes, where the heat should be even to give a spongy texture.
Conventional with Fan Suitable for roasts and cakes. The fan spreads the heat evenly throughout the inside of the oven to reduce cooking time and temperature.
Lower Element Heat only comes from beneath. Suitable for warming plates or letting dough rise.
Turbo The fan spreads the heat coming from an element located at the back of the oven. As a result of the evenly distributed temperature, food can be cooked on two levels at the same time.
Grill and Lower Element Ideal for roasts. This function can be used with any size joints of meat.
Pizza Ideal for baking pizzas, pies, and fruit tarts or sponges.
Grill Toasting and browning. This function allows the surface to be cooked without affecting the inside of the food. Suitable for flat pieces such as steaks, ribs, fish and toasts.
Slow cooker Designed to cook casseroles, stews, etc, in the traditional way, and for all recipes specifying long cooking times and low heat. For the best results, we recommend using covered casserole pans with lids, first making sure that they can be used in the oven.
Maxigrill For toasting larger surfaces than possible with the Grill function, in addition to greater toasting power for faster food browning.
MaxiGrill with Fan For even roasting and simultaneous surface browning. Ideal for mixed grills. Perfect for bulky pieces such as poultry and game. The meat should be placed on the oven grid with the tray below to collect meat juices.
Oven Functions · Defrosting

Recommendations for Defrosting Food
The defrost function works by means of a 2-level system of hot air. HI is for meats in general and LO is for fish, cakes, pastries and bread. When selecting the defrost function, select HI or LO on the temperature display by pressing on the temperature sensor and then the or sensors.
See the following chart for defrosting times and temperature levels:
HI LEVEL
FOOD
Weight Time Weight Time
Bread 1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
1/2 Kg
The times shown in the chart are a guide. The time needed for defrosting will depend on the temperature of the room, weight of the food and how frozen it is.

1 2 3 4 5 6 7 8 9

Use of the electronic timer
After setting the clock, the oven is ready for use:
1 Press the On sensor .
The touch control sensitivity continuously adapts to changing conditions. Ensure that the glass front of the control panel is clean and free of any obstacles when turning on the oven.
2 Press on the desired cooking function sym- bol.
3 The temperature display will show the preset temperature for that cooking function. Press on the temperature sensor (5) to change it. Select the desired temperature by pressing on the + or – sensors.
If the clock does not respond correctly when you touch the glass, you will need to turn off the oven for a few seconds and then turn it back on. By doing this, the sensors adjust automatically and will react once more to fingertip control.
4 The top oven cavity will start to heat up. Functions6), (7), (8), ( and), will start the fast preheating function for a few minutes. The oven will beep when it reach- es the selected temperature.
Setting the Electronic Clock When turning your oven on, you will see the clock flashing 12:00 . Set the clock by touching the or symbols on the glass. You will hear 2 beeps confirming the time has been set.
5 During oven heating, the o display will flash to show that the food is being heated.
If you want to change the time, touch the clock sensor (2) until the indicator flashes (1). Change the time by touching the or –– sensors. The two beeps you hear after that will confirm the new time has been set.
6 Press on the Off sensor to stop cooking.
11 12 10 · Manual Operation

3 You will then hear two beeps, the display will show the time left before the alarm sounds and the symbol will flash slowly, indicating that the timer has been set.
The inside light will go on:
– When the oven door is open. If the door is not
closed after a certain time, the light will turn off to reduce power consumption.
4 Once the programmed time has passed, an alarm will sound and the symbol will begin to flash more quickly.
– When any cooking function is selected. The
light will turn off after a certain time.
If you want to turn the light on during cooking, just touch the Oven Light sensor12). If you keep your finger on this sensor for a few seconds, the light will stay on throughout cooking.
5 Press on any sensor on the control panel to stop the alarm.
You can change the programmed time whenever you want by touching the clock sensor several times until the symbol flashes, and then touching the or sen- sors. The two beeps you hear after that will confirm the new time has been set.
During the pyrolitic cleaning function, the inside light will not turn on.
1 Press on the clock sensor (2). The symbol (14will flash.
Cooking Time: This function allows you to programme cooking time length, after which the oven will turn off automatically.
2 Select the cooking time by pressing the or sensors.
Cooking Stop Time: This function allows you to programme the time for cooking to stop, after which the oven will turn off automatically.
3 Two consecutive beeps will then sound and the display will show the remaining cooking time. The symbol (14) will flash slowly to indicate that the oven will switch itself automatically.
Cooking Time and Cooking Stop Time: This function allows both cooking time length and the stop time to be programmed. With this function, the oven switches on automatically at the set time and operates for the cooking time it has been programmed for. It switches itself off automatically at the entered stop time.
4 Select a cooking function and temperature.
5 Once the cooking time is complete, the oven will turn off, an alarm will sound and the (14) symbol will flash more quickly.
Timer Alarm: A beep will go sound when the set time has finished, whether the oven is on or off.
6 Press on any sensor on the control panel to stop the alarm.
Child safety: This function locks the oven, preventing small children from playing with it.
You can change the programmed time whenever you want by touching the clock sensor (2) and then on the or sensors. The two beeps you hear after that will confirm the new time has been set.
Programming the Timer Alarm
1 Press on the clock sensor (2) several times until the symbol 13 flashes.
2 Select the length of time after which you want the alarm to sound by pressing on the + or sensors.
Oven Lighting · Programming Cooking Time · Electronic Clock Functions

Programming the Cooking Stop Time
15 Select the cooking stop time by pressing the or sensors.
1 Press on the clock sensor (2) several times until the symbol 15) flashes.
16 This will be confirmed by two beeps. The current time will show on the display and the15) symbol will remain lit.
2 Select the cooking stop time by pressing the or sensors.
3 Two consecutive beeps will then sound and the display will show the remaining cooking time. The (15 symbol will flash slowly to indicate that the oven will switch itself automatically.
17 Select a cooking function and temperature.
18 The oven will remain off, with the(15) symbol lit and the (14) symbol flashing slowly. The clock will show the current time and the inside light will remain off. The oven is now programmed.
4 Select a cooking function and temperature.
19 When it is time to start cooking, the oven will switch on and will operate for the programmed cooking time. The clock display will show the remaining cooking time.
5 Once it is the set time, the oven will turn off, an alarm will sound and the 15) symbol will flash more quickly.
6 Press on any sensor on the control panel to stop the alarm.
10 Once the set time is reached, the oven will turn off, an alarm will sound and the14) and (15symbols will flash.
You can change the programmed cooking stop time at any moment by pressing on the clock sensor (2) until the (15symbol flashes and then by pressing on the + or – sensors. The two beeps you hear after that will confirm the new time has been set.
11 Press on any sensor on the control panel to stop the alarm.
If you wish to change the cooking stop time while cooking is in progress, press on the clock sensor several times until the symbol flashes. You can then change the cooking stop time by pressing on the or sensors. The two beeps you hear after that will confirm the new time has been set.
You can use this function even if you are already cooking with the oven. If this is the case, follow all of the above instructions except No. 4.
Programming Cooking Time and Cooking Stop Time
11 Press on the clock sensor (2). The symbol (14) will flash.
This function locks the oven, preventing small children from playing with it. To turn on the function, press on the (16) symbol until you hear a long beep and see several flashing dots between the digits of the temperature display (4). The oven is now locked.
12 Select the cooking time by pressing the + +or + +sensors.
13 Two consecutive beeps will then sound, and the display will show the remaining cooking time. The (14symbol will flash slowly.
14 Press on the clock sensor (2) several times until the symbol15) flashes.
Child Safety Function

To turn off the child lock, keep the (16) symbol pressed until a long beep sounds.
In the event of power failure, your electronic clock timer settings will be erased and 12:00 will flash on the clock display. Reset the clock and programme again.
1 2 3 4 5 6 7 8 9
Follow the instructions below to carry out a pyrolytic cleaning cycle:
6 Once the pyrolytic programme is selected, touch sensor (12). You will hear a double beep confirming that the programme is set.
1 IMPORTANT: Remove all accessories (shelves, grids, side supports to hold up the shelves, telescopic guide rails) from inside the oven and close the oven door.
7 After a short time, you will see the time remaining for the selected programme on the display (4) to end. You will see the cu - rrent time on the timer display (5). The oven will start to heat up.
2 Touch the On / Off sensor (10).
3 Touch sensor (12).
8 After a brief time, the door lock indicator light (3) will turn on and you will not be able to open the oven door.
4 You will see P2 (pyrolytic programme 2) flashing on the display (4) and the and sensors will light up.
5 You can now change the pyrolytic programme to P1, P2 or P3 by pressing the or sensors:
11 12 10 · and 30 minutes

9 When the pyrolytic cleaning cycle has fi - nished, you will hear an alarm.
13 Open the oven door and wipe the inside with a damp cloth, cleaning up the ash from the cleaning cycle. Areas in the oven that are difficult to access will need to be cleaned with a non-metallic fibre scourer.
10 Touch any of the oven’s sensors to stop the alarm.
11 The oven’s heating process has finished. However, the oven is extremely hot and cannot be used. The cooling motor will operate and the indicator light (3) remain on until the oven cools down.
14 Once the oven is clean, do not forget to replace the supports and accessories.
15 The oven is now ready to be used again.
The cooling process may last up to 2 hours owing to the high temperatures inside the oven.
12 Once the oven has cooled down, indicator light (3) will automatically turn off.
To cancel the pyrolytic cleaning cycle, remember:
b) The oven is hot:
– Switch off the oven by touching sensor
(10). The time 0:00 will be shown on the central display (4).
a) The oven is cold:
– Switch off the oven by touching sensor
– The oven’s cooling motor will continue to
(10).
operate and the door lock indicator light (3) will be lit up.
– You will see the time remaining until the
door unlocks on the display (4).
– When the electronics detect that the
– When this time gets to 0:00 and indicator
oven is cold, you will see the time remaining until the door unlocks on the display (4).
light (3) turns off, you will be able to open the oven door.
– When this time gets to 0:00 and indica-
tor light (3) turns off, you will be able to open the oven door.

1 2 3 4 5 6 7 8 9
My accessories and shelf supports are damaged.
You have not removed the accessories and supports during the pyrolytic cleaning cycle.
You must replace them and remove them in later cleaning cycles.
The enamel colour has changed or stains have appeared.
The chemical composition of some foodstuffs may cause changes in the enamel.
This is normal and does not damage the properties of the enamel.
A flashing symbol appears on the temperature display (2) and an alarm sounds.
The oven is programmed to carry out a pyrolytic cleaning cycle but the door is open.
Close the door to enable the function to be carried out.
I have programmed the pyrolytic function, the oven is working properly but indicator light (3) is not lit up.
Indicator light (3) does not work properly.
Call the Technical Assistance Service.
The pyrolytic programme has finished but the oven door is locked.
The oven has not cooled down to the safe temperature.
Wait until the oven cools down and indicator light (3) turns off.
A flashing symbol E:1 appears on the temperature display (2) and an alarm sounds. The oven has stopped heating up.
The oven door has not been locked. The door is not closed properly and cannot be locked.
Touch any sensor to stop the alarm. Check the door and make sure that it is closed properly.
11 12 10

A flashing symbol E:1 appears on the temperature display (2) and an alarm sounds. The oven has stopped heating up.
The oven door has not been locked. The door lock has not worked.
Touch any sensor to stop the alarm. Call the Technical Assistance Service.
A flashing symbol E:1 appears on the temperature display (2) and an alarm sounds. The oven has stopped heating up.
The door is locked but the door lock indicator light (3) does not light up.
Touch sensors and (12) at the same time and the door should unlock. Call the Technical Assistance Service.
A flashing symbol E:2 appears on the temperature display (2) and an alarm sounds.
You have opened the door before it has been locked.
Touch any sensor to stop the alarm. You will see the time left before the oven can be used again on the display (4). When the display shows 0:00, close the door before programming the pyrolytic function again.
A flashing symbol E:3 appears on the temperature display (2) and an alarm sounds.
You have opened the door during the pyrolytic function. The door lock has not worked.
Call the Technical Assistance Service - your oven is operating in potentially dangerous conditions. The door should be locked with the pyrolytic function.
A flashing symbol E:4 appears on the temperature display (2) and an alarm sounds. You will see that the door lock indicator light (3) is on.
The door has been locked without a pyrolytic cleaning cycle being programmed.
Touch any sensor to stop the alarm. The E4 symbol will continue to flash and the time remaining until the door is unlocked will be shown on the display (4). After this time, indicator light (3) will turn off and you will be able to open the door. Touch any sensor to remove the symbol E4. Call the Technical Assistance Service.

A flashing symbol E:5 appears on the temperature display (2).
The oven’s clock is set but the oven door is locked.
You will see the time left before the oven can be used again on the display (4). When the display shows 0:00, indicator light (3) will turn off and you will be able to open the oven door and use the oven as normal.
I have followed the above instructions but the door is still locked and the oven is cold.
No specific cause Press sensors and (12) at the same time and the door should unlock.
The door is locked, indicator light (3) is on and 0:00 is shown on the central display.
During the cancellation process, you have not waited for the time to finish and have opened the door too early.
Touch the OFF sensor and you will see the remaining time on the display (4).
Should the oven door be still locked even though you have followed all these instructions, please contact the Technical Assistance Service.

Changing the oven light bulb
Make sure the oven is unplugged before changing the bulb.

The replacement bulb must be resistant to temperatures up to 300 oC. You can order one from Technical Service.
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.