DE
Novy logo
Offizielle Bedienungsanleitung

Novy 2141

28 Seiten·1.6 MB·Backofen·PDF·ENJA
Novy 2141
Inhaltsverzeichnis 2 Abschnitte ENGLISH · MODE AnzeigenAusblenden
Page 1 of the Novy 2141 user manual
Seite 1 · Zum Vergrößern klicken
Seite 1
Novy 2141 diagram (page 1)
Abb. 1

1 Control Panel 2 Oven Seal 3 Grill Element 4 Trau Support 5 Grid 6 Baking Tray 7 Deep Tray 8 Hinge 9 Door 10 Air Outlet 11 Fixing to Unit 12 Grill Screen 13 Smoke Outlet 14 Light 15 Back Wall Panel 16 Fan

1 Function selector.

3 Temperature selector.

2 Electronic clock.

4 Heating indicator light*.

* Indicates that heat is being passed to the food and it goes out when the set temperature is reached.

Page 2 of the Novy 2141 user manual
Seite 2 · Zum Vergrößern klicken
Seite 2

Conventional with fan Appropriate for roasts and cakes. The fan spreads the heat uniformly inside the oven.

Grill and Lower element Special for roasts. It can be used for any piece, whatever its size.

Conventional It is used for sponges and cakes where the heat received must be uniform to achieve a spongy texture.

Lower element Heats only from beneath. Suitable for heating dishes and raising pastry and similar.

MaxiGrill with fan Allows uniform roasting at the same time as surface browning. Ideal for grills. Special for large volume pieces, such as poultry game etc. It is recommended to put the item on a rack with a tray beneath to collect the stock and juices.

Defrosting This cooking mode is suitable for gently defrosting of food. In special food to be consumed unwarmed, e.g.: cream, custard, pastry, tarts, cakes, fruit,...

MaxiGrill Allows greater surfaces to be prepared, than with the grill, together with higher power reducing the time required for browning of the food.

The pilot light remains on in any cooking function.

Grill For preparing dishes with superficial roasting. It allows the outer layer to be browned without affecting the inside of the food. Ideal for flat food, such as steaks, ribs, fish, toast.

Use of the Oven

Setting the time on the clock

On connecting the oven, you will notice that 12:00 appears on the clock and that a light begins to flash above the symbol. Pressing the “+” and “–“ buttons the correct time can be set on the clock, which is subsequently stored and the flashing light goes out.

After setting the correct time, the oven is ready for use. Select a temperature and a cooking function.

To switch off the oven, set the controls to the position .

Oven Functions · Switch off oven · Manual use

Page 3 of the Novy 2141 user manual — ENGLISH
Seite 3 · Zum Vergrößern klicken
Seite 3

Functions of the Electronic Clock Programmer

Programming the end of cooking time for the oven

1 Press the MODE button until the indicator next to the symbol begins to flash.

Cooking time: This function allows to programme the oven to cook for a specified time, after which it will switch itself off.

2 Select the time that cooking is to finish, pressing the “+” or “–“ buttons.

End of cooking time: This function allows to establish the exact hour, after which the oven will switch itself off.

3 Subsequently, the indicator that was flashing is lit, indicating that the oven will switch itself off automatically.

Duration and automatic stop: This function is used to control the duration and the time at which the oven will turn itself off. This function allows the oven to start and stop automatically.

4 The clock will then show the current time.

5 Select a temperature and a cooking function.

6 When the programmed time is reached, the oven will disconnect, an alarm will sound and the indicator will begin to flash.

7 Press any button to switch off the alarm and the oven will reconnect.

1 Press the MODE button until the signal next to the symbol begins to flash.

8 Set the controls to the position to switch off the oven.

2 Choose the time when you want the alarm to sound, pressing the “+” or “–“ buttons.

This function may be used even though you are already cooking in your oven. To do so, follow the instructions given except Nº 5.

3 Subsequently, the light will remain on indicating that the alarm is programmed.

4 At the end of the programmed time, an alarm will sound and the light will begin to flash. 5 Press any button to turn off the alarm and the screen shows the current time again.

Programming the duration and automatic stop

1 Press the MODE button until the indicator next to the symbol begins to flash.

ENGLISH

2 Select the length of cooking time pressing the “+” or “–“ buttons.

Programming the cooking time

1 Press the MODE button until the indicator next to the symbol begins to flash.

3 Subsequently, the indicator that was flashing will remain lit.

2 Select the length of time, pressing the “+” or “–“ buttons.

4 Press the mode button until the indicator next to the symbol begins to flash.

3 Subsequently, the indicator that was flashing will light, indicating that the oven will switch itself off automatically.

5 Select the time that cooking should finish pressing the “+” or “–“ buttons.

6 Subsequently, the indicator that was flashing will remain lit.

4 The clock will then show the current time.

5 Select a temperature and cooking function.

7 Select a function and cooking temperature.

6 When the set time has elapsed, the oven will disconnect, an alarm will sound and the indicator will begin to flash.

8 The oven will remain disconnected with the indicators next to the and symbols lit. Your oven is programmed.

7 Press any button to switch off the alarm, reconnecting the oven. 8 Set the controls in the position to switch off the oven.

9 When the time to begin cooking is reached, the oven will switch itself on and will continue cooking during the programmed time.

Page 4 of the Novy 2141 user manual — MODE
Seite 4 · Zum Vergrößern klicken
Seite 4

10 When the programmed finishing time is reached, the oven will disconnect, an alarm will sound and the light next to the symbol will begin to flash.

In the event of a power cut, all the programming of the electronic clock will be erased. The correct time has to be reset and the watch reprogrammed.

11 Press any button to switch off the alarm and the oven will reconnect.

12 Set the controls to the position to switch of the oven.

Pressing the MODE button the display on the screen shows any function programmed. It can be changed by pressing the “+” or “–“ buttons. On selecting the desired function, the indicator next to the corresponding symbol will light.

MODE

Frage zu Novy 2141 stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Novy 2141

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Novy 2141 PDF-Anleitung

28 Seiten·1.6 MB·Backofen·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…