Benutzeranleitung / Produktwartung 25 Series des Produzenten Buhler
Zur Seite of 44
.
.
25 Series Rotary Tiller TABLE OF CONTENTS DESCRIPTION PAGE WARRANT Y ................................................................ 1 INTRODUCTION ......................................................... 2 SAFETY ...................................
25 Series Rotary Tiller PARTS LISTS Tiller Drawings and Parts List............................ 28 PTO (Shear Pin) Drawing & Parts List .............. 33 PTO (Slip Clutch) Drawing & Parts List ............. 35 Gearbox Drawing & Parts List .
25 Series Rotary Tiller 1 WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months (90 days for commercial application) from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper applications.
25 Series Rotary Tiller 2 INTRODUCTION Buhler Farm King has a collection of rotary tiller m odels to suit your garden and landscaping needs. The 25 Series Tiller attaches to the 3-point hitch as well as our Cat. 1 Quick Hitch and is designed to fit a variety of tractors from 12 hp to 25 hp.
25 Series Rotary Tiller 3 SAFETY Remember, YOU are the key to safety. Good safety practices not only protect you, but also the people around you. Make these practices a working part of your safety program.
25 Series Rotary Tiller 4 GENERAL SAFETY Have a first-aid kit available for use and know how to use it. Have a fire extinguisher available, stored in a highly visible location, and know how to use it.
25 Series Rotary Tiller 5 SERVICE AND MAINTENANCE SAFETY Stop engine, set brake, remove ignition key, and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging. Support the equipment with blocks or safety stands before working beneath it.
25 Series Rotary Tiller 6 SAFETY SIGN LOCATIONS – cont’d. Safety sign “A” Safety sign “B” Safety sign “C” Safety Sign “C” Replace safety signs immediately should they become damaged, torn or illegible. Obtain replacements from your authorized dealer using the part numbers shown.
25 Series Rotary Tiller 7 ASSEMBLY The machine is shipped with the PTO shaft not installed. To install the PTO driveline on the machine, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Clean the splines on the yoke and the input shaft.
25 Series Rotary Tiller 8 PRE-OPERATION CHECKLIST Efficient and safe operation of the Rotary Tiller requires that each operator reads and understands the operating procedures and all related safety precautions outlined in this section. A pre-operation checklist is provided for the operator.
25 Series Rotary Tiller 9 OPERATION TO THE NEW OPERATOR OR OWNER The Buhler Farm King 25 Series Rotary Tiller is a machine that combines the primary and secondary tillage operation into one machine. It breaks up the soil and prepares the seed bed in one pass.
25 Series Rotary Tiller 10 EQUIPMENT MATCHING To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor with the correct specifications. Use the following list as a guide in selecting a tractor to use on the machine. 1.
25 Series Rotary Tiller 11 DRIVELINE DIMENSION A PTO driveline is supplied with the machine. To accommodate the variety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but not bottom out when going through its working range.
25 Series Rotary Tiller 12 DRIVELINE DIMENSION – cont’d. 7. Pull the driveline apart and cut 1/2 of the dimension determined in step 5 from each end. Add another ½ inch (12MM) to each cut off s egment. 8. Be sure to use a hacksaw to cut 1/2 from each end of the separated shaft.
25 Series Rotary Tiller 13 ATTACHING/UNHOOKING The Tiller should always be located on a level, dry area that is free of debris and other foreign objects. When attaching the machine to a tractor, follow this procedure: 1. Clear the area of bystanders, especially small children.
25 Series Rotary Tiller 14 FIELD OPERATION Buhler Farm King 25 Series Rotary Tillers are designed with the inherent flexibility of operating well in almost any kind of soil and terrain conditions. However, the operator has the responsibility of being familiar with all operating and safety procedures and following them.
25 Series Rotary Tiller 15 FIELD OPERATION - cont'd. 7. Align the unit with the working area. 8. Starting machine: a. Run the engine at low idle. b. Slowly engage the PTO control to start the machine. c. Slowly bring the engine to the rated PTO speed.
25 Series Rotary Tiller 16 FIELD OPERATION - cont'd. e. The rotation of the Tines propel the machine in the forward direction. Always use the tractor transmission to control the speed of forward travel. f. Always disengage the PTO control and raise the machine out of the ground before depressing the master clutch on the tractor.
25 Series Rotary Tiller 17 TRANSPORTING When transporting the machine, review and follow these instructions: 1. Be sure all bystanders are clear of the machine. 2. Be sure that the machine is securely attached to the tractor and all retainer pins are installed.
25 Series Rotary Tiller 18 STORAGE After the season's use, the machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at the start of next season.
25 Series Rotary Tiller 19 THEORY OF OPERATIONS.
25 Series Rotary Tiller 20 MAINTENANCE SERVICE Follow Maintenance Safety Instructions as outlined. FLUIDS AND LUBRICANTS 1. Hydraulic Oil: Use a standard hydraulic oil for all operating conditions. 2. Gear Box Oil: Use an SAE 85W90 gear oil for all operating conditions.
25 Series Rotary Tiller 21 SERVICING INTERVALS The periods recommended below are based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication or oil changes. 8 Hours or Daily; Telescoping Tubes and Quick Disconnect 20 Hours 1.
25 Series Rotary Tiller 22 SERVICING INTERVALS – cont’d. 40 Hours 1. Check gearbox oil level. Add as required 2. Add approximately 10 squirts of grease in chain case. Annually 1. Change gearbox oil. Refill with SAE 85W90 gear oil. 2. Wash machine.
25 Series Rotary Tiller 23 MAINTENANCE By following a careful service and maintenance program for your machine, you will enjoy many years of trouble-free operation. A-FRAME ADJUSTMENT When moving the hitch along the front frame to adjust the offset, follow this procedure: 1.
25 Series Rotary Tiller 24 SHEAR BOLT A shear pin is provided in the input drive shaft at the gearbox to protect the drive system during an overload. To change the shear pin, follow this procedure: 1. Place all controls in neutral, stop engine, set park brake, remove ignition key and wait for all moving parts to stop before dismounting.
25 Series Rotary Tiller 25 CLUTCH MAINTENANCE 1. Before first use or after storage of more than one month, the clutch should be checked. 2. Disengage clutch by turning in the four socket set screws. 3. Run the PTO at low idle to slip the clutch linings.
25 Series Rotary Tiller 26 TROUBLE SHOOTING The Buhler Farm King 25 Series Rotary Tiller moves curved Tines on a turning rotor through the ground to break it up and prepare a seed bed. It is a simple and reliable system that requires minimal maintenance.
25 Series Rotary Tiller 27 BOLT TORQUE.
25 Series Rotary Tiller 28 40”, 48” & 60” 25 SERIES TILLERS.
25 Series Rotary Tiller 29.
25 Series Rotary Tiller 30 PARTS LIST WHEN ORDERING PARTS Always give your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
25 Series Rotary Tiller 31 21 983000471 1/4" X 11 Link Chain 22 967357 Drag Shield Bracket 23 903156 A-Frame Brace Plate 24 967483 Tine - Right 25 967484 Tine - Left 26 983000241 Depth Gauge Shoe.
25 Series Rotary Tiller 32 64 81569 5/16'' Lock Washer 65 9812767 1/2'' GR.8 Lock Washer 66 965807 CAT. 1 Top Link Pin 67 967279 Tension Spring Spacer (1 5/8'' Long) 68 8.
25 Series Rotary Tiller 33 25 SERIES TILLER PTO (SHEAR PIN).
25 Series Rotary Tiller 34 25 SERIES TILLER PTO PARTS LIST (SHEAR PIN) ITEM PART NO. DESCRIPTION F0357 Shaft Complete 908251 Outer Half Shaft - Tractor 908252 Inner Half Shaft w/Shear - Implement 1 90.
25 Series Rotary Tiller 35 25 SERIES TILLER PTO (SLIP CLUTCH).
25 Series Rotary Tiller 36 25 SERIES TILLER PTO PARTS LIST (SLIP CLUTCH) ITEM PART NO. DESCRIPTION F0356 Shaft Complete 908258 Outer Half Shaft 936515 Inner Half Shaft 1 907290 Yoke 2 920-002 Ser 2 Re.
25 Series Rotary Tiller 37 25 SERIES TILLER GEARBOX 25 SERIES TILLER GEARBOX PARTS LIST ITEM PART NO. DESCRIPTION QUANTITY 912300164 Gearbox Complete 1 1 967300 Housing 1 2 967301 Hex Shaft 35.2mm Diameter 1 3 967302 Cover 110mm Diameter 1 4 967303 Snap Ring, E.
25 Series Rotary Tiller 38 SHIPPING KIT AND BUNDLE NUMBERS The following is a list of Kit Numbers for this product and the Bundle Numbers, Descriptions and Quantities for each Kit.
.
DIVISION LOCATIONS U.S. WAREHOUSES Farm King Division 301 Mountain Street S. Morden, MB R6M 1X7 Ph.: (204) 822-4467 Fax: (204) 822-6348 Allied/Inland Division 1260 Clarence Avenue Winnipeg, MB R3T 1T2 Ph.: (204) 284-6100 Fax: (204) 477-2325 B.I.I. Division 1330 43 rd Street N.
Ein wichtiger Punkt beim Kauf des Geräts Buhler 25 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Buhler 25 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Buhler 25 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Buhler 25 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Buhler 25 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Buhler 25 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Buhler 25 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Buhler 25 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Buhler 25 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
