Benutzeranleitung / Produktwartung PL-100 des Produzenten ZyXEL
Zur Seite of 54
PL-100 PowerLine 85 Mbps Ethernet Adapter User ’ s Guide V ersion 1.00 1/2010.
PL-100 User’s Guide 2 Copyright Copyright Copyright © 2010 by ZyXEL Communications Corpo ration. The contents of this publication may not be reprod uced in any part or as a whole, transcribed, stor.
PL-100 User’s Guide Federal Com munications Commission ( FCC) Interf erence Statem ent 3 Federal Communications Commission (FCC) Interference S t atement Federal Communications Commissi on (FCC) Interference St atement This device complies with Part 15 of FCC rul es.
PL-100 User’s Guide 4 Safety Warnings Safety W arnings For your safety , be sure to read and fo llow all warning notices and instructions. • Do NOT open the device or un it. Opening or removi ng covers can expose you to dangerous high vo ltage points or othe r risks.
PL-100 User’s Guide ZyXEL Limited Warranty 5 ZyXEL Limited W arranty ZyXEL warrants to the original en d user (purchaser) that this product is free from any defects in materials or workmansh ip for a period of up to tw o years from the date of purchase .
PL-100 User’s Guide 6.
PL-100 User’s Guide Table of Contents 7 T able of Content s Copyright .................................................. ................................................................ 2 Federal Communications Commissi on (FCC) Interference St atement .
PL-100 User’s Guide 8 Table of Contents Chapter 4 Using the Configuration Utility ............................................... .............................. 27 4.1 Configuration Utility Main Screen ................. ................ ............
PL-100 User’s Guide List of Figure s 9 List of Figures Figure 1 Connecting the PL-100 to a Broadband Modem .... ................... ................ ............. 20 Figure 2 Connecting the PL-100 to a Computer ....... ............. ............. ..
PL-100 User’s Guide 10 List of Figures.
PL-100 User’s Guide List of Tables 11 List of T ables T able 1 LED St atus of the PL-100 After Connection ................................ ................ .......... 22 T able 2 Utility Main Window Descriptions .......................... ..........
PL-100 User’s Guide 12 List of Tables.
PL-100 User’s Guide Preface 13 Preface Congratulations on your p u rchase of the PL-100 PowerLine 85 M bps Ethernet Adapter . Note: Register your product online to receive e-mail notice s of firmware upgrades and information at www .zyxel.com for global products, or a t www .
PL-100 User’s Guide 14 Preface.
PL-100 User’s Guide Chapter 1 Getting to Know Your PL-100 15 C HAPTER 1 Getting to Know Y our PL-100 This chapter introduces the main feat ures and applications of the PL-100.
PL-100 User’s Guide 16 Chapter 1 Getting to Know Yo ur PL -100 LAN Port The 10/100 Mbps auto-negotiatin g Ethernet LAN port allows the PL-100 to detect the speed of incoming transmissions and ad just appropriately without manual intervention.
PL-100 User’s Guide Chapter 1 Getting to Know Your PL-100 17 1.4.3 Share Files, Printers and Other Devices The benefit of any home network is of course to e asily connec t to high speed Internet, but also to share and exchange content. Easily share one printer with everyone in the house.
PL-100 User’s Guide 18 Chapter 1 Getting to Know Yo ur PL -100.
PL-100 User’s Guide Chapter 2 Connecting the PL-1 00 19 C HAPTER 2 Connecting the PL-100 This chapter describes how to connect the PL-100 to your broadband con nection and computers.
PL-100 User’s Guide 20 Chapter 2 Connecting the PL- 100 2.2 Connecting the PL-100 2.2.1 Connecting the PL-100 to Y our Main Cable or DSL Modem In order to get the whole house n etworked, you want to first make sure all the comp uters you wish to be networked are connected proper ly to a PL-100 adapter .
PL-100 User’s Guide Chapter 2 Connecting the PL-1 00 21 2.2.2 Connecting th e PL-100 to a Computer For all the computers you wish to be networked, they must each be connected properly to a PL-100 Ethernet adapter . The figure below shows how to connect the PL-100 to each computer .
PL-100 User’s Guide 22 Chapter 2 Connecting the PL- 100 2.2.3 LED St atus The LEDs of the PL-100 show the current connection status. Figure 3 PL-100 T op View With LED Lig hts Table 1 LED Status of the PL-1 00 After Con nection Please refer to the troubleshooting gu ide for additional help if needed.
PL-100 User’s Guide Chapter 3 Installing th e PL-100 Software 23 C HAPTER 3 Inst alling the PL-100 Sof tware 3.1 Inst allation of the Utility Please verify that no other HomePlug or Encr yption Management Utilities are installed before installing this product.
PL-100 User’s Guide 24 Chapter 3 Installing the PL-100 Software 2 Enter your User Name and Organization (optional). For ex clusive control by an individual, click the “ Only for me ” radio button.
PL-100 User’s Guide Chapter 3 Installing th e PL-100 Software 25 4 The installation wizard is ready to begin the installation. Click Next to proceed or Cancel to exit the wizard. Figure 7 Install Begin Screen 5 The PL-100 Configuratio n Utility is being installed.
PL-100 User’s Guide 26 Chapter 3 Installing the PL-100 Software 6 This is the screen to confirm the Installatio n W izard has s uccessfully installed the PL-100 Configuration Utility to your computer .
PL-100 User’s Guide Chapter 4 Using the Configuration Utility 27 C HAPTER 4 Using the Configuration Utility After the hardware and software ar e installed successful ly , you can set up and adjust your network. In order to run the configurat ion utility , dou ble-click the utility icon.
PL-100 User’s Guide 28 Chapter 4 Using the Configuration Utility Table 2 Utility Main Window Descriptions LABEL DESCRIPTION T op Panel This shows all local HomePl ug devices found connected to the computer ’s NIC (Network Interface Card). In most cases, only one device will be seen.
PL-100 User’s Guide Chapter 4 Using the Configuration Utility 29 Figure 1 1 Add Device A confirmation box will appear if the password was entered correctly and if the device was found. If a device is not found, you will be notified and suggestions to resolve common problems will be presented.
PL-100 User’s Guide 30 Chapter 4 Using the Configuration Utility 4.2 Privacy Screen The Privacy dialog screen provides a means for managi ng the local network and pro viding additional security . All HomePlug devices ar e shipped using a default logical network (network name), which is norm ally “HomePlug”.
PL-100 User’s Guide Chapter 4 Using the Configuration Utility 31 4.3 Diagnostics Screen The Diagnostics screen shows system information an d a history of all devices seen.
PL-100 User’s Guide 32 Chapter 4 Using the Configuration Utility Table 4 Diagnostics Screen Items LABEL DESCRIPTION Upper Panel This area shows technical data concerning software and hardware on the host computer used to communicate over HomePlug.
PL-100 User’s Guide Chapter 4 Using the Configuration Utility 33 4.4 About Screen The About screen in the figure below shows the so ftware version and provides access to the ZyXEL website. Figure 15 About Screen Table 5 About Screen Choices LABEL DESCRIPTION http://www .
PL-100 User’s Guide 34 Chapter 4 Using the Configuration Utility.
PL-100 User’s Guide Chapter 5 Troubles hooting 35 C HAPTER 5 T roubleshooting This chapter covers potential pr oblems and possible remedies. After each problem descri ption, instructions are provided to help you diagnose and fix th e problem. 5.1 Using LEDs to Diagnose a Problem 5.
PL-100 User’s Guide 36 Chapter 5 Tr oubleshooting.
PL-100 User’s Guide Appendix A PL-100 Specificati ons 37 A PPENDIX A PL-100 S pecifications Table 9 Specifications Table 10 RJ-45 Connector Pin Assignments ITEM DESCRIPTION Product Name PL-100 PowerLine 85 Mbps Ethernet Adapter Power Input 100 - 240 V AC, 50 ~ 60 Hz, 0.
PL-100 User’s Guide 38 Appendix A PL-100 Specifica tions.
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 39 A PPENDIX B Setting up Y our Computer ’ s IP Address All computers must have a 10M or 100M Et hernet adapter card and TCP/IP installed.
PL-100 User’s Guide 40 Appendix B Setting up Your Computer’s IP Add ress Windows 95/98/Me Click St a r t , Settings , Control Panel and double-click the Network icon to open the Network window .
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 41 If you need Client for Microsoft Ne tworks: 1 Click Add . 2 Select Client and then click Add . 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click OK .
PL-100 User’s Guide 42 Appendix B Setting up Your Computer’s IP Add ress Figure 18 Windows 95/98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • If you do not know your gateway’ s IP address, remove previously installed gateways.
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 43 Windows 2000/NT/XP The following exa mple figures use the default W indows XP GUI theme.
PL-100 User’s Guide 44 Appendix B Setting up Your Computer’s IP Add ress Figure 21 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the Genera l tab in W in XP) and then click Properties .
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 45 • If you have a static IP address click Use the following IP Address and fill in the IP addr ess , Subnet mask , and Default gateway fields.
PL-100 User’s Guide 46 Appendix B Setting up Your Computer’s IP Add ress Figure 24 Windows XP : Advanced TC P/IP Properti es 7 In the Internet Protocol TCP/IP Pr operties window (the General tab in W indows XP): • Click Obtain DNS server address automatically if you do not know your DNS server IP addre ss(es).
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 47 Figure 25 Windows XP: Internet Protocol (TCP/IP) Prope rties 8 Click OK to close the Internet Protocol (TCP/IP) Properties window . 9 Click Close ( OK in W ind ows 2000/NT) to close the Local Area Connection Properties window .
PL-100 User’s Guide 48 Appendix B Setting up Your Computer’s IP Add ress Macintosh OS 8/9 1 Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel . Figure 26 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list.
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Addr ess 49 Figure 27 Macintosh OS 8/9: TCP/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configur e: list. 4 For statically assigned settings, do the following: •F r o m t h e Configure box, select Manually .
PL-100 User’s Guide 50 Appendix B Setting up Your Computer’s IP Add ress • Select Built-in Ethe rnet from the Show list. • Click the TCP/IP tab.
PL-100 User’s Guide Index 51 Index Numerics 10/100 Mbps 16 11 0 V A C 4 230V AC 4 56-bit DES 15 85 Mbps 15 A Abnormal Working Conditions 5 About Screen 33 AC 4 Accessories 4 Acts of God 5 Adapter La.
PL-100 User’s Guide 52 Index F Failure 5 FCC 3 , 37 FCC interf erence st atement 3 Federal Communication s Commission 3 Fitness 5 Frequency Band 37 Full-duplex 16 Functionally Equivalent 5 G Game Consol e 19 Gas Pipes 4 God, act of 5 H Half-duplex 16 High V oltage Points 4 HomePlug 1.
PL-100 User’s Guide Index 53 PL-100 S pec ifications 37 PLC 15 PL T 15 Pool 4 Postage Prepaid. 5 Power Cord 4 Power Input 37 Power Line Network 37 Preferences 33 Print Report 32 Privacy Screen 30 Pr.
PL-100 User’s Guide 54 Index V endor 4 , 32 V entilation Slots 4 V oltage Supply 4 V oltage, High 4 W W all Moun t 4 Wa r n i n g s 4 W arranty 5 W arranty Period 5 Wa t e r 4 W ater Pipes 4 Web Con.
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL PL-100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL PL-100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL PL-100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL PL-100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL PL-100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL PL-100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL PL-100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL PL-100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL PL-100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
