Benutzeranleitung / Produktwartung ZyXEL ZyAIR A-6000 des Produzenten ZyXEL Communications
Zur Seite of 46
A-6000 High Speed, Long Range Ethernet Wireless Bridge User's Guide Ver 1.0 January, 2005.
.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Copyright iii Copyright A-6000 High Speed, Long Range Ethernet Wireless Bridge Copyright © 2 00 4 by ZyXEL Communications C orporation.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge FCC S tatement iv Federal Communications Commission (FCC) Interference S t atement This device complies with Part 15 of FCC rules. Op eration is subje c t to the following two conditions: This device may not cause harmful interfere nce.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Information for Canadian Users v Information for Canadian Users The Industry Canada label identifies certified equipm ent. This certification means that the equipment meets certain telecommunications net work protective, operation, and safety requirements.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Warra nty vi ZyXEL Limited W arranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material s or workmanship for a period of up to two years from the date of purchase.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Customer Support vii Customer Support Before contact ZyXEL customer support/r epresentative, pl ease record the followi ng info rmation for custom er support: ♦ Model nam e (A-6000) and serial num ber.
.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge T able of contents ix T able of Content s Copyright ............................................................................................................... iii Federal Communications Commission (FCC) Interference Statement .
A-6000 High Speed, Long Range Ethern et W ir eless Bridge List of Figures/T ables x List of Figures Figure 2-1 Front view of A-6000 .............................................................................................. 2-1 Figure 2-2 Bottom view of A-6000 .
A-6000 High Speed, Long Range Ethern et W ir eless Bridge List of Figures/T ables xi List of T ables Table 1-1 Specification of A-6000 .......................................................................................... 1-3 Table 2-1 Connectors of bottom .
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Getting to Kno w Y our A- 6000 1-1 Chapter 1 Getting to Know Your A-6000 This chapter introduce s the main features and applicat ions of the A-6000. 1.1 Introduction to the A-6000 The ZyXEL A-6000 is a Wirele ss Bridge for Inter-building Point to Point Ethern e t connection.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Getting to Kno w Y our A- 6000 1-2 14. ZyXEL will provide all starter i ngredients (such as pr ototypes) on a di scounted basi s to Widenet service providers for smooth transition and integration into exis ting client base s , authorization, and billing.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Getting to Kno w Y our A- 6000 1-3 1.6 Applications of the A-6000 With A-6000 Secure Wirel ess Point to Point Solution, y ou can extend and enhance your network virtually overnig h t without natural or man-made barriers to overco me.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Getting to Kno w Y our A- 6000 1-4 System privacy protection SSID, MAC access c ontrol, 802.1x based mutual authentic ation Wireless data encryption and authentication AES/TKIP CONFIG.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-1 Chapter 2 Hardware Installation This chapter explains the physical ports and how to con nect the hardware of A-6000. 2.1 Hardware Description The content of the A-6000 are descri bed below.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-2 Figure 2-3 Top vie w of A-6000 The major interfaces on top of A-6000 i s the RF antenna connector with special design for water pro of. Table 2-2 describes the antenna connecto r.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-3 Figure 2-6 HDF 400 RF cable 4. RS-232 cabl e The RS-232 cable is u sed to connect the outdoor unit and the ante nna alignment kit. The appearance of the RS-232 cable is shown bel ow.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-4 7. Mounting bracke t The mounting kit is used to provide a good sup por t for the outdoor unit and the flat panel antenna. Please follow the installation procedure to mount the outdoor unit and the flat panel ante nna.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-5 10. CAT-5 Straight-through Ethern et cable The CAT-5 STP cable is 2m in length. T his cable is us ed to connect the network/power injector and the CPE. The picture of this cable is sho wn below.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-6 Figure 2-14 Physical Installation of A-6000 w ith flat panel antenna 2. Installation of outdoor unit The installati on procedures of A-6000 i s describe d as below: (1) Choose an appropriate pl ace for the installation.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-7 (5) Fasten the mounting brack et assembly to install outdoor unit on the mast . Figure 2-17 Install Outdoor Unit to the Mast (6) Connect the an tenna to the N-male connector port labeled on t he top of outdoor u nit.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-8 Figure 2-19 Connect Cat-5 cable to the outdoo r unit Figure 2-20 Connect Grounding w ire to the outdoor unit.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-9 2.3 Indoor Unit Installation After the outdoor unit in stallation is completed, you may follo w the procedures below to install the indoor unit. 1. Choose an appropriate place for the network/power injector.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-10 3. Connect the ot her end of the RS-23 2 cabl e to the antenna alignment kit AK-100. Adjust the horizontal angle of directiona l antenna to get the maximum reading in the LEVEL and SNR disp lay of AK-100.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Hardware Installation 2-1 1 2.8 RSSI LED Indication For easily confi g uring A-600 0 radio status , 3 RSSI LED are designed i n IDU to indicate radio RSS I status. The following m apping table explains the meaning of RSSI – “L”, “M”, an d “H” LED signal status.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-1 Chapter 3 Initial Setup This chapter explain s how to perform the initial A-6000 setup and gives an o v erview of WEB menus.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-2 3.2.2. Access the A-6000 System WEB Server There are three tags on left-top of the Web Server System Status wind ow: St atus, Configuration and Syslog. Each of the tag contains different functions of the A-6000 ma nagement.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-3 Figure 3-3 System Status windo w 5. Press the Wireless Informa tion, then current Radio Status will be catched.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-4 3.2.3. System Configuration The web server win dows allow you to setup the co nfigur ation information for the BU. The web serve r provides functions for system setup and firmware updates by clicking the “ Configuration” tag on left- top of the WEB window.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-5 To update configuration files: 1. Enter the configuration updates or change s in the appropriate configuration fields. 2. Click Update. After click Update, there will appear re d string alarm t o let you press the REBOOT BU to reboot system to make the changes effective.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-6 Security Specifies the security policy in AES, or TKIP Security Key Specifies key setting related to security policy. Maximum length is 64 characters. Ethernet Configuration Description LAN IP Address Specifie s the IP address of the BU.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge Initial Setup 3-7 Figure 3-8 System Log Windo w s.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 4-1 Chapter 4 CLI commands 4.1 command list How to use CLI commands to get or set system informat ion , frequency, and other different param eters, following pages give you detailed information for each com mand.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 4-2 -> get gate w ay Gatewa y IP Addres s: -> set gate w ay 192.168.0.1 Gateway IP Address: 192.168.0.1 (5) To display hardware Use the get hard ware command to display the vendor ID and chip (MAC, PHY and analog) re visions.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 4-3 set ipmask 255.0.0.0 Sets the subnet mask for the BU ethernet interface set autochannel disable Disables autochannel selection. (optional) set channel < channel number > Selects a channel.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 4-4 (16) To display/modify data rate Use the get/set rate command to displa y or modify the data rate. Select one of the following data rates: 6, 9, 12, 18, 24, 36, 48, 54, and best, respectively.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 4-5 (22) To display/modify Telnet Use the get/set telnet command to enab le or disable telnet access to the BU.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-1 Chapter 5 Glossary of Terms 10BaseT The 10-Mbps baseband Ethernet spe c ification that uses two pairs of twisted-pair cabling (Category 3 or 5): one pair fo r transmitting data and the other for receiving data.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-2 Crossover Ethernet cable A cable that wires a pin to its opposite pi n, for exam ple, RX+ is wired to TX+. This cable connects two similar devic es, for example, two data terminal equipment (DTE) or data communica tions eq uipment (DCE) devices.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-3 Flash memory The nonvol atile storage that can be electrically e rased and reprogrammed so that data can be stored, booted, and rewritten as nece ssary. FTP File Transfer Protocol is an Internet file transfer service that operates on the Internet and over TCP/IP networks.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-4 dangerous can cau se your system to crash. ISP Internet Service Providers provide connect ions into the Internet for home users and businesses. There are local, regi onal, national, and global ISPs.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-5 Ping Attack An attack that slows down the network until it is unusable. The attacker sends a "ping" command to the network repeate dly to slow it down. See also Denial of Service.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-6 need to be made along the way. Permanent mean s that the circuit is preprogrammed by the carrier as a p ath through the network. It does not need to be set up or torn down for each session.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-7 the most common cable used. SUA Single User Account – The Prestige's SUA (Single User Account) feature allows multiple user Internet access for the co st of a single ISP account - see also NAT.
A-6000 High Speed, Long Range Ethern et W ir eless Bridge CLI commands 5-8 WWW (World Wide Web) -- Fre quently used when referri ng to "The Internet", WWW has two major meanings - First, loosely used: the wh ole constellation of resources that can be accessed using Gophe r, FTP, HTTP, telnet, USENET, WAIS and some other tools.
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications ZyXEL ZyAIR A-6000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications ZyXEL ZyAIR A-6000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications ZyXEL ZyAIR A-6000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications ZyXEL ZyAIR A-6000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications ZyXEL ZyAIR A-6000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications ZyXEL ZyAIR A-6000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications ZyXEL ZyAIR A-6000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications ZyXEL ZyAIR A-6000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications ZyXEL ZyAIR A-6000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
