Benutzeranleitung / Produktwartung P-661H-D des Produzenten ZyXEL Communications
Zur Seite of 113
P-661H-D Series ADSL2+ 4-port Security Gateway Support Notes Version3.40 Mar. 2006.
P-661H-D Series Support Notes FAQ ................................................................................................................. 5 ZyNOS FAQ ...........................................................................................
P-661H-D Series Support Notes 17. What do the ATM QoS Types (C BR, UBR, VBR-nRT, VBR-RT) mean? ................................................................................................................ 15 18. What is content filter? ............
P-661H-D Series Support Notes General FAQ ........................................................................................... 28 1. What is VPN? ....................................................................... 28 2. Why do I need VPN? .
P-661H-D Series Support Notes 3. Setup the P-661H-D as a DHCP Relay ................................ 41 4. SUA Notes ............................................................................ 42 5. Using Full Feature NAT ............................
P-661H-D Series Support Notes FAQ ZyNOS FAQ 1. What is ZyNOS? ZyNOS is ZyXEL's proprietary Network O perating System. It is the platform on all Prestige routers that delivers network services and applications. It is designed in a modular fashion so it is easy for developers to add new features.
P-661H-D Series Support Notes b. Enter CI command 'sys stdio 0' to disable Stdio idle timeout c. To upgrade firmware, use TFTP client program to put firmware in file 'ras' in the Prestige. After data transfe r is finished, the P-661H-D will program the upgraded firmware into FLASH ROM and reboot itself.
P-661H-D Series Support Notes with its own address and the source por t in the TCP or UDP header with another value chosen out of a local pool . It then recomputes the appropriate header checksums and forwards the packet to t he Internet as if it is originated from Prestige using the IP address assi gned by ISP.
P-661H-D Series Support Notes must be configured. (You can configure it in Web Configurator, Advanced Setup, Network -> NAT -> Port Forwarding ).
P-661H-D Series Support Notes The following table summarizes the five types. NAT Type IP Mapping One-to-One ILA1<--->IGA1 Many-to-One (SUA/PAT) ILA1<--->IGA1 ILA2<--->IGA1 ... Many-to-Many Overload ILA1<--->IGA1 ILA2<--->IGA2 ILA3<--->IGA1 ILA4<--->IGA2 .
P-661H-D Series Support Notes • Allow everything that is not spoofing us Filter rule setup: • Filter type =TCP/IP Filter Rule • Active =Yes • Source IP Addr =a.b.c.d • Source IP Mask =w.x.y.z • Action Matched =Drop • Action Not Matched =Forward Where a.
P-661H-D Series Support Notes Product FAQ 1. How can I manage P-661H-D? Multilingual Embedded Web GUI for Local and Remote management CLI (Command-line interface) Telnet support (Administr.
P-661H-D Series Support Notes do not interfere with your voice transm issions. For the details about how to connect the micro filter please refer to the user's manual.
P-661H-D Series Support Notes The outside users can always a ccess the web server using the www.zyxel.com.tw regardless of the WAN IP of the P-661H-D. When the ISP assigns the P-661H-D a new IP, the P-661H-D updates this IP to DDNS server so that the server can update its IP-to-DNS entry.
P-661H-D Series Support Notes For forwarding the inbound IPSec ESP tunnel, A 'Default' server set is required. You could configure it in Web Configurator, Advanced Setup, Network -> NAT -> Port Forwarding -> Default Server Setup: It is because SUA makes your LAN appear as a single machine to the outside world.
P-661H-D Series Support Notes 16. What do the parameters (PCR, SCR, MBS) mean? Traffic shaping parameters ( PCR, SCR, MBS ) can be set in Web Configurator, Advanced Setup, Network -> Remote Node -> Edit -> ATM Setup : Peak Cell Rate(PCR): The maximum bandwidth allocated to this connection.
P-661H-D Series Support Notes when the P-661H-D performs content filter ing. You can also specify trusted IP Addresses on LAN for which the P-661H-D will not perform c ontent filtering. You can configure the deta ils about it in Web Conf igurator, Advanced setup, Security -> Content Filter.
P-661H-D Series Support Notes ADSL FAQ 1. How does ADSL compare to Cable modems? ADSL provides a dedicated service over a single telephone line; cable modems offer a dedicated service over a shared media.
P-661H-D Series Support Notes 6. Does the VC-based multiplexing perform better than the LLC-based multiplexing? Though the LLC-based multiplexing can carr y multiple protocols over a single VC, it requires extra header information to identify the prot ocol being carried on the virtual circuit (VC).
P-661H-D Series Support Notes More and more Telco/ISPs are providing three kinds of services (VoIP, Video and Internet) over one existing ADSL connection. • The different services (such as vi deo, VoIP and Internet access) require different Qulity of Service.
P-661H-D Series Support Notes Firewall FAQ General 1. What is a network firewall? A firewall is a system or group of syst ems that enforces an access-control policy between two networks. It may also be defined as a mechanism used to protect a trusted network from an untrusted network.
P-661H-D Series Support Notes address and protocol. They also 'ins pect' the session data to assure the integrity of the connection and to adapt to dynamic protocols.
P-661H-D Series Support Notes 1. Those that exploits bugs in a TCP/IP implementation such as Ping of Death and Teardrop. 2. Those that exploits weaknesses in the TCP/IP specification such as SYN Flood and LAND Attacks. 3. Brute-force attacks that flood a network with useless data such as Smurf attack.
P-661H-D Series Support Notes 11 What is Brute-force attack? A Brute-force attack, such as 'Smurf' attack, targets a f eature in the IP specification known as directed or subnet broadcasting, to quickly flood the target network with useless data.
P-661H-D Series Support Notes 1. Change the default Administrator pa ssword since it is required when setting up the firewall. 2. Limit who can access to your P-661H-D’s Web Configurator or CLI.
P-661H-D Series Support Notes (3) WWW/Telnet service is enabled but your host IP is not the secured host entered in Web Configur ator, Advanced setup, Advanced -> Remote MGNT: (4)A filter set which blocks WWW/Telnet from WAN is applied to WAN node.
P-661H-D Series Support Notes (2) You have disabled FTP service in Web Configurator, Advanced setup, Advanced -> Remote MGNT. (3) FTP service is enabled but your host IP is not the secured host entered in Web Configurator , Advanced setup, Advanced -> Remote MGNT.
P-661H-D Series Support Notes • Web configuration: Advanced Setup, Maintenance -> Logs -> Log Settings , check Access Control and Attacks options depending on your real situation. • CI command: sy s logs category [access | attack] (2) Enable log function in firewall def ault policy or in firewall rules.
P-661H-D Series Support Notes VPN FAQ General FAQ 1. What is VPN? A VPN gives users a secure link to acce ss corporate network over the Internet or other public or private networks without the expense of lease lines.
P-661H-D Series Support Notes PPTP is a tunneling protocol defined by the PPTP forum that allows PPP packets to be encapsulated within Inte rnet Protocol (IP) packets and forwarded over any IP network, including the Internet itself. The PPTP is supported in Windows NT and Windows 98 already.
P-661H-D Series Support Notes There is no restriction that the IPSec hosts and the security gateway must be separate machines. Both IPSec protocols, AH and ESP, can operate in either transport mode and tunnel mode.
P-661H-D Series Support Notes IP address dynamically assigned from ISP, so P-661H-D needs additional information to make the decision. Such additional information is what we call phase 1 ID. In the IKE payload, there are local and peer ID field to achieve this.
P-661H-D Series Support Notes 2. What kind of VPN protocols are supported on P-661H-D? All P-661H-D series support IPSec VPN, in other words, we can build IPSec VPN on P-661H-D. And also note that P-661H-D is of VPN (IPSec, PPTP) passthrough supported NAT.
P-661H-D Series Support Notes VPN Gateway behind NAT ESP Tunnel mode NAT in Transport mode None (3) Source IP/Destination IP -- Please do not number the LANs (local and remote) using the same range of privat e IP addresses. This will make VPN destination addresses and the local LAN addresses are indistinguishable, and VPN will not work.
P-661H-D Series Support Notes We have tested P-661H-D successfully with the following third party VPN gateway: • Cisco 1720 Router, IOS 12.2(2)XH, IP/ADSL/ FW/IDS PLUS IPSEC 3DES • NetScreen 5, ScreenOS 2.6.0r6 • SonicWALL SOHO 2 • WatchGuard Firebox II • Avaya VPN • Netopia VPN • III VPN 8.
P-661H-D Series Support Notes NAT * NAT in Transport mode None * The NAT router must support IPSec pass through. For example, for P-661H-D SUA/NAT routers, the default port and the client IP have to be specified in Web Configurator, Network -> NAT ->SUA Server Setup.
P-661H-D Series Support Notes disconnected either manually, by idle ti mer, or because of power cycle, packet triggering is still necessary to make the tunnel up. 14. Single, Range, Subnet, which types of IP address do P-661H-D support in VPN/IPSec? P-661H-D supports all of the types.
P-661H-D Series Support Notes Application Notes General Application Notes 1. Internet Access Using P- 661H-D under Bridge mode • Setup your workstation • Setup your P-661H-D under bridge mode If t.
P-661H-D Series Support Notes Setup your P-661H-D under bridge mode The following procedure shows you how to configure your P-661H-D as bridge mode. We will use Web Conf igurator to guide you through the related menu.
P-661H-D Series Support Notes Internet Connection. Key Settings: Option Description Encapsulation Select the correct Encapsulation type that your ISP supports. For example, RFC 1483. Multiplexing Select the correct Multiplexing type that your ISP supports.
P-661H-D Series Support Notes Connect the LAN ports of all computers to the LAN Interface of P-661H-D using Ethernet cable. (2) TCP/IP configuration Since the P-661H-D is set to DHCP se rver as default, so you need only to configure the workstations as the DHCP clients in the networking settings.
P-661H-D Series Support Notes Option Description Encapsulation Select the correct Encapsulation type that your ISP supports. For example, RFC 1483. Multiplexing Select the correct Multiplexing type that your ISP supports.
P-661H-D Series Support Notes 4. SUA Notes Tested SUA/NAT Applications (e.g ., Cu-SeeMe, ICQ, NetMeeting) Introduction Generally, SUA makes your LAN appear as a single machine to the outside world.
P-661H-D Series Support Notes mIRC None for Chat. For DCC, please set Default/Client IP . Windows PPTP None 1723/client IP ICQ 99a None for Chat. For DCC, please set: ICQ -> preference -> connections -> firewall and set the firewall time out to 80 seconds in firewall setting.
P-661H-D Series Support Notes Network Time Protocol (NTP) None 123 /server IP Win2k Terminal Server None 3389/server IP Remote Anything None 3996 - 4000/client IP Virtual Network Computing (VNC) None .
P-661H-D Series Support Notes Configure an Internal Server behind SUA Introduction If you wish, you can make internal serv ers (e.g., Web, ftp or mail server) accessible for outside users, even t hough SUA makes your LAN appear as a single machine to the outside world.
P-661H-D Series Support Notes Setup, Network -> NAT -> Port Forwarding. The outside users can access the local server using the P-661H-D's WAN IP address which can be obtained from Web Configurator, Status -> WAN Information . For example: Configuring an internal Web server for outside access (suppose the Server IP Address is 192.
P-661H-D Series Support Notes FTP 21 Telnet 23 SMTP 25 DNS (Domain Name Server) 53 www-http (Web) 80 Configure a PPTP server behind SUA Introduction PPTP is a tunneling protocol defined by the PPTP fo.
P-661H-D Series Support Notes Window98 PPTP Client / Internet / NT RAS Server Protocol Stack PPTP appears as new modem type (Virt ual Private Networking Adapter) that can be selected when setting up a connection in the Dial-Up Networking folder. The VPN Adapter type does not appear el sewhere in the system.
P-661H-D Series Support Notes Example The following example shows how to dial to an ISP via the P-661H-D and then establish a tunnel to a private network . There will be three items that you need to set up for PPTP application, these are PPTP server (WinNT), PPTP client (Win9x) and the P-661H-D.
P-661H-D Series Support Notes Select service name as ‘PPTP’, fill in t he Server IP Address, then press button ‘Add’. When you have finished the above settings, you can ping to the remote Win9x client from WinNT. This ping comm and is used to demonstrate that remote the Win9x can be reached across the In ternet.
P-661H-D Series Support Notes 5. Using Full Feature NAT When P-661H-D is in Routing mode, you can select NAT Option as Full Feature in Network -> Remote Node -> Edit: Key Settings: Field Options Description Full Feature When you select this option you can select Address Mapping Set Number 1~8 in the pull-down menu on the right.
P-661H-D Series Support Notes The P-661H-D has 8 remote nodes and so allows you to configure 8 NAT Address Mapping Sets, You must specify which NAT Address Mapping Set (1~8) to use in the remote node when you select Full Feature NAT. You can edit 10 rules for each Address Mapping Set.
P-661H-D Series Support Notes IP. Global End IP This is the ending global IP address (IGA). N/A Type This is the NAT mapping types. Many-to-One and Server Here we’ll guide you to confi gure Address Mapping Sets from Web Configurator and CLI . (Since in Web Configurator we can only edit the rules for Address Mapping Sets #1.
P-661H-D Series Support Notes The following table describes the fields in this screen. Field Description Option/Example Type You can select one of the fi ve mapping types from the pull-down menu 1. One-to-One 2. Many-to-One 3. Many-to-Many Overload 4.
P-661H-D Series Support Notes Setp 3: Set NAT address mapping rule for t he Address Mapping Set you just configured (Set 2 in this example) by command ‘ ip nat addrmap rule [rule#] [insert | edit] [type] [local start IP] [l ocal end IP] [global start IP] [global end IP] [server set #] ’.
P-661H-D Series Support Notes server sets ip nat server save Save the NAT server set buffer into flash ip nat server clear [set#] Clear the server set [set#], must use “sav e” command to let it sa.
P-661H-D Series Support Notes Please note that a server can support more than one service, e.g., a server can provide both FTP and Mail service, while another provides only Web service. The following procedures show how to configure a server behind NAT.
P-661H-D Series Support Notes In our Internet Access example, we only need one rule where all our ILAs map to one IGA assigned by the ISP. You can just use the default SUA NAT , or you could select Full Feature NAT and select an Address Mapping Set with a Many-to-One Rule.
P-661H-D Series Support Notes below: (3) Using Multiple Global IP addresses for clients and servers (One-to-One, Many-to-One, Server Set mapping types are used) In this case we have 3 IGAs from the I SP. We have two very busy internal FTP servers and also an internal general server for the web and mail.
P-661H-D Series Support Notes Step 1: In this case, we need to map ILA to more than one IGA, therefore we must choose the Full Feature option from the NAT field in currently active remote node, and assign IGA3 to P- 661H-D’s WAN IP Address.
P-661H-D Series Support Notes Rule 3 Setup: Select Many-to-One type to map the other clients to IGA3 (200.0.0.3). Rule 4 Setup: Select Server type to map our web server and mail server with ILA3 (192.
P-661H-D Series Support Notes Step 3: Now we configure a ll other incoming traffic to go to our web server and mail server from Web Conf igurator, Advanced Setup, Netw ork -> NAT -> Port Forward.
P-661H-D Series Support Notes One rule configured for using Many-to-Many No Overload mapping type is shown below. We can also do this by configure three One-to-One mapping type rules.
P-661H-D Series Support Notes When the ISP assigns the P-661H-D a new IP, the P-661H-D must inform the DDNS server the change of this IP so t hat the server can update its IP-to-DNS entry. Once the IP-to-DNS table in the DDNS server is updated, the DNS name for your web server (i.
P-661H-D Series Support Notes User Name Enter the user name that the DDNS server gives to you. Password Enter the password that the DDNS se rver gi ves to you. Enable Wildcard Enter the hostname for the w ildcard function that the WWW.DYNDNS.ORG supports.
P-661H-D Series Support Notes When receiving any SNMP get or se t requirement with wrong community, this trap is sent to the manager. 6. whyReboot (defined in ZYXEL-MIB) : When the system is going to restart (wa rmstart), the trap will be sent with the reason of restart before rebooting.
P-661H-D Series Support Notes The SNMP related settings in P-661H-D are configured in Web Configurator, Advanced Setup, Advanced -> Remote MGNT -> SNMP The following steps describe a simple setup procedure for configuring all SNMP settings. Key Settings: Option Descriptions Get Community Enter the correct Get Community.
P-661H-D Series Support Notes Trap Destination Enter the IP address of the NMS that you wish to send the traps to. If 0.0.0.0 is entered, the P-661H-DHW-DX will not send trap any NMS manager. Note: You may need to edit a fire wa ll rule to permit SNMP Packets.
P-661H-D Series Support Notes The P-661H-D supports three virtual LAN interfaces via its single physical Ethernet interface. The first network can be configured in Web Configurator, Advanced Setup, Network -> LAN -> DHCP Setup .
P-661H-D Series Support Notes You can edit filter rule to accept or deny LAN packets from/to the IP alias 1/2 go through the P-661H-D by command in CLI : lan index [index number] Usage: index number =.
P-661H-D Series Support Notes and remote node connections, we can rout e the Web packets to the Internet using one policy and route the FTP packets to the remote LAN using another policy.
P-661H-D Series Support Notes The actions that can be taken include rout ing the packet to a different gateway (and hence the outgoing interface) and t he TOS and precedence fields in the IP header. IPPR follows the existing packet filtering facility of ZyNOS in style and in implementation.
P-661H-D Series Support Notes (Set the protocol ID as 6(TCP) for the rule) ip policyrouting set criteria serviceType 0 (Set the criteria type of servic e as don’t care for this rule) ip policyroutin.
P-661H-D Series Support Notes 11. Using Call Scheduling • What is Call Scheduling? Call scheduling enables the mechanism for the P-661H-D to run the remote node connection according to the pre-defi ned schedule. This feature is just like the scheduler ina video reco rder which records the pr ogram according to the specified time.
P-661H-D Series Support Notes wan callsch oncedate 2005 12 27 (Set the schedule used just once, it works on 2005-12-27) wan callsch starttime 12 00 (Set the schedule start time as 12:00) wan callsch d.
P-661H-D Series Support Notes • Time Service in P-661H-D There is no RTC (Real-Time Clock) chip so the P-661H-D should launch a mechanism to get current time and date from external server in boot time. Time service is implemented by the Daytime protocol(RFC-867) , Time protocol(RFC-868) , and NTP protocol(RFC-1305) .
P-661H-D Series Support Notes needs to be forwarded. At start up, the P- 661H-D queries all directly connected networks to gather group membership. After that, the P-661H-D updates the information by periodic queries. The P-661H-D implementation of IGMP is al so compatible with version 1.
P-661H-D Series Support Notes Fairness-Based is chosen, then the bandwidth is allocated by ratio. Which means if A class needs 300 kbps, B cla ss needs 600 kbps, then the ratio of A and B's actual bandwidth is 1: 2. So if we get 450 kbps in total, then A would get 150 kbps, B would get 300 kbps.
P-661H-D Series Support Notes Step 3 : You can modify the rule by clicking the button ‘Edit’ on the rule: Key Settings: RuleName Give this rule a name, for example, 'WWW' BW Budget Configure the bandwidth you would like to allocate to this rule Priority Enter a number between 0 and 7 to set the priority of this class.
P-661H-D Series Support Notes Destination Subnet Mask Enter the destination subnet mask. Destination Port Enter the destination port number of the traffic.
P-661H-D Series Support Notes services of the line will be. After t hat, system will save back the correct VPI, VCI and also services (encapsulation) type into profile of WAN interface.
P-661H-D Series Support Notes (3) Delete items from the auto-haunting preconfigur ed table by useing command: wan atm vchunt remove <remote node> <vpi> <vci> • Using Zero configuration.
P-661H-D Series Support Notes (4) Basically the zero conf iguration only work on the VC that was preconigured in the auto-haunting preconfigured table.
P-661H-D Series Support Notes The packet filter function on P-661H-D is the same as before, just that you could only configure the filter set and apply them by command in CLI.
P-661H-D Series Support Notes • Apply to LAN Interface: lan index [index#] Usage: index#=1 main LAN 2 I P A l i a s # 1 3 I P A l i a s # 2 lan filter <incoming|outgoing> <tcpip |generic> <set1#> <set2#> <set3#> <set4#> Usage: You can apply at mo st four filter sets to LAN Interface.
P-661H-D Series Support Notes mask] the rule sys filter set destport [port#] [compare type = none|equal|notequal|less|greate r] Set the destination port and compare type (co mpare type could be 0(none.
P-661H-D Series Support Notes IPSEC VPN Application Notes 1. How to use P-661H-D to build VPN Tunnel with another VPN Gateway/ Software? This page will guide you to setup a VPN connection between two Prestige routers. In addition to Prestige to Presti ge, Prestige can also talk to other VPN hardwards/softwares.
P-661H-D Series Support Notes The IP addresses we use in this example are as below. PC 1 Prestige A Prestige B PC 2 192.168.1.33 LAN: 192.168.1.1 WAN: 202.132.154.1 LAN: 192.168.2.1 WAN: 168.10.10.66 192.168.2.33 Note: The following configurations ar e supposed both two VPN gateways have fixed IP addresses.
P-661H-D Series Support Notes (3) On the SUMMARY menu, select a policy to edit by clicking Edit . On P-661H-D, we can build at most 2 VPN Tunnels. Just make a click on the ‘ Edit ’ button in the table, we can begin to configure the VPN rule.
P-661H-D Series Support Notes (6) Fill in the VPN Gateway information in the Address Information field. My IP Address is the WAN IP of Prestige A , 202.132.154.1 in the example. Secure Gateway Address is the remote secure gateway, Prestige B’s WAN IP , 168.
P-661H-D Series Support Notes Note: If there’s a NAT router between the two VPN Secure Gateways, we should only choose ‘ ESP ’ VPN Protocol The minimum length of Pre-Shared Key is 8 . (8) A common VPN Rule has been completed, you can click ‘Apply’ to save it.
P-661H-D Series Support Notes Secure Gateway Address is the remote secure gateway, Prestige A’s WAN IP , 202.132.154.1 in the example. (3) Local ID Type /Content should be the same as Prestige A’s Peer ID Type/Content , IP/0.0.0.1 in the example. Peer ID Type / Content should be the same as Prestige A’s Local ID Ty pe/ Content , IP/0.
P-661H-D Series Support Notes Prestige> ipsec debug 1 IPSEC debug level 1 Prestige> catcher(): re cv pkt numPkt<1> get_hdr nxt_payload<1> exchMo de<2> m_id<0> len<80&g.
P-661H-D Series Support Notes Most of the cases, static IP addre sses are used for VPN tunneling endpoints. But for SOHO users, generally, it is a dy namic case. In this case, this IP will not be available to be predefined in t he VPN box. There are some tips when configure Prestige in any dynamic case.
P-661H-D Series Support Notes Step 1: In Prestige A, please register a DDNS account from http://www.dyndns.org or http://dynupdate.no-ip.com Setp 2: Enable DynDNS function on Prestige A via Web configurator, Advanced -> Dynamic DNS . And in VPN settings on Prestige A, please specify the IP address of My IP as 0.
P-661H-D Series Support Notes internal server according to the se rvice port and private IP entered in SUA/NAT Server Table. However, if both NAT and IPSec is enabled in Prestige, the edit of the table is necessary only if the connection is a non-secure connections.
P-661H-D Series Support Notes The IP addresses we use in this example are as shown below. Branch_A Headquarter Branch_B WAN:202.3.1.1 LAN:192.168.3.1 WAN:202.1.1.1 LAN:192.168.1.1 WAN:202.2.1.1 LAN:192.168.2.1 LAN of Branch_A LAN of Headquarter LAN of Branch_B 192.
P-661H-D Series Support Notes Be very careful about the remote IP address in branch office B, because systems behind branch office B want to access systems behind branch office A and headquarter, we have to s pecify these two segments in Remote section.
P-661H-D Series Support Notes (2) My IP Address is the WAN IP of Prestige in Branch_B , 202.2.1.1 in the example. Secure Gateway Address is IP address of Headquarter , 202.1.1.1 in the example. (3) Suppose the pre-shared key is 01234567 , we should configure the same key in the corresponding rule in Headquarter VPN Gateway.
P-661H-D Series Support Notes Remote Address Type is Range Address and IP Address Start is 192.168.2.0 , IP Address End is 192.168.2.255 . This section covers the LAN segment of branch office B. (2) My IP Address is the IP Address of Headquarter , 202.
P-661H-D Series Support Notes Support Tool 1. LAN/WAN Packet Trace The Prestige packet trace records and analyzes packets running on LAN and WAN interfaces. It is designed for us ers with technical backgrounds who are interested in the details of the packet fl ow on LAN or WAN end of Prestige.
P-661H-D Series Support Notes (2) Trace WAN packet • Disable the capture of t he LAN packet by entering: sys trcp channel enet0 none • Enable to capture the WAN packet by entering: sys trcp chann .
P-661H-D Series Support Notes • Offline Trace • Disable the capture of t he WAN packet by entering: sys trcp channel mpoa00 none • Enable the capture of t he LAN packet by entering: sys trcp cha.
P-661H-D Series Support Notes • Capture the detailed l ogs by Hyper Terminal Step 1: Initiate a hyper terminal connection from your PC(suppose you connected to the LAN port of P-661H-D) Step 2: Click the ‘properties’ to configure parameters to telnet to the P-661H-D.
P-661H-D Series Support Notes Step 3: So that after you invoke the relevant commands, you could save the logs you’ve captured. 105 All contents copyright © 2006 ZyXEL Communicati ons Cor poration.
P-661H-D Series Support Notes 2. Firmware/Configurations Upload ing and Downloading using TFTP • Using TFTP client software • Upload/download ZyNOS via LAN • Upload/download Prestige c onfigurat.
P-661H-D Series Support Notes The 192.168.1.1 is the IP addr ess of the Prestige. The lo cal file is the source file of the ZyNOS firmware that is availa ble in your hard disk. The remote file is the file name that will be saved in Pres tige. Check the port number 69 and 512-Octet blocks for TFTP.
P-661H-D Series Support Notes The 192.168.1.1 is the IP address of the Prestige. The local file is the source file of y our configuration file that is available in your hard disk. The remote file is the file name that will be saved in Prestige.
P-661H-D Series Support Notes [cppwu@faelinux cppwu]$ tftp -I 192.168.1.1 put [local-ras] ras <- upload firmware 3. Using FTP to Upload the Firmware and Configuration Files In addition to upload th.
P-661H-D Series Support Notes 'Binary' . Step 2: Press 'OK' to ignore the 'Username' prompt. Step 3: To upload the firmware file, we transfer the local 'ras' file to overwrite the remote 'ras' file.
P-661H-D Series Support Notes Step 4: The Prestige reboots automatica lly after the uploading is finished. Please do not power off the router at this moment.
P-661H-D Series Support Notes CI Command Reference Command Syntax and General User Interface CI has the following command syntax: command < iface | device > subcommand [ param ] command subcommand [ param ] command ? | help command subcommand ? | help General user interface: 1.
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications P-661H-D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications P-661H-D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications P-661H-D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications P-661H-D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications P-661H-D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications P-661H-D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications P-661H-D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications P-661H-D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications P-661H-D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
