Benutzeranleitung / Produktwartung P-2302HW-P1 Series des Produzenten ZyXEL Communications
Zur Seite of 337
P-2302HW/HWL-P1 Series 802.1 1b/g Wireless V oIP S tation Gateway User ’ s Guide V ersion 3.6 0 Edition 2 8/2008.
.
P-2302HW/HWL-P1 Series User’s Guide Copyright 3 Copyright Copyright © 2008 by ZyXEL Communications Corpo ration. The contents of this publication may not be reprod uced in any part or as a whole, t.
P-2302HW/HWL-P1 Series User’s Guide 4 Certifications Certifications Federal Communications Commissi on (FCC) Interference St atement The device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: • This device may not cause harmful interference.
P-2302HW/HWL-P1 Series User’s Guide Certifications 5 注意 ! 依據 低功率電波輻射性 電機管理辦法 第十二條 經型式認證合 格之低功率射頻電機，非經 許可，公司.
P-2302HW/HWL-P1 Series User’s Guide 6 Safety Warnings Safety W arnings For your safety , be sure to read and fo llow all warning notices and instructions. • Do NOT use this product near water , for exam ple, in a we t basement or near a swimming pool.
P-2302HW/HWL-P1 Series User’s Guide Safety Warnings 7 This product is recyclable . Dispose of it properly ..
P-2302HW/HWL-P1 Series User’s Guide 8 ZyXEL Limited Warranty ZyXEL Limited W arranty ZyXEL warrants to the original en d user (purchaser) that this product is free from any defects in materials or workmansh ip for a period of up to two years from the date of purchase.
P-2302HW/HWL-P1 Series User’s Guide Customer Support 9 Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor . If yo u cannot contact your vendo r, then contact a ZyXEL office for the region in which you bought the dev ice.
P-2302HW/HWL-P1 Series User’s Guide 10 Customer Suppo rt Cost a Rica • Support E-mail: soporte@zyxel.co.cr • Sales E-mail: sales@zyxel.co.cr • T elephone: +506-2017878 • Fax: +506-2 015098 • W eb: www .
P-2302HW/HWL-P1 Series User’s Guide Customer Support 11 Germany • Support E-mail: support@zyxel.de • Sales E-mail: sales@zyxel.de • T elephone: +49-2405 -6909-69 • Fax: +49-2405-6909-99 • W eb: www .zyxel.de • Re g u l ar M a il : ZyXEL Deut schland GmbH.
P-2302HW/HWL-P1 Series User’s Guide 12 Customer Suppo rt • Re g ul a r Ma i l: ZyXEL Kazakhstan, 43 Dostyk A ve., Of fice 414, Dostyk Business Centre, 050010 Almaty , Republic of Kazakhstan Malaysia • Support E-mail: support@zyxel.com.my • Sales E-mail: sales@zyxel.
P-2302HW/HWL-P1 Series User’s Guide Customer Support 13 • Fax: +7-095-542-89-25 • W eb: www .zyxel.ru • Re g ul ar Ma il : ZyXEL Russia, Ostrovity anova 37a Str ., Moscow 1 17279, Russia Singapore • Support E-mail: support@zyxel.com.sg • Sales E-mail: sales@zyxel.
P-2302HW/HWL-P1 Series User’s Guide 14 Customer Suppo rt • Fax: +662-831-539 5 • W eb: http://www .zyxel.co.th • Re g ul a r Ma i l: ZyXEL Thailan d Co ., Ltd., 1/1 Moo 2, Ratchaphruk Road, Bangrak-Noi, Muang, Nonthaburi 1 1000, Thailand. T urkey • Support E-mail: cso@zyxel.
P-2302HW/HWL-P1 Series User’s Guide Table of Contents 15 T able of Content s Copyright .................................................. .......................................... ...................... 3 Certifications ............................
P-2302HW/HWL-P1 Series User’s Guide 16 Table of Contents 3.2.1 Welcome ....................... ................... ... .................... ... ................... ... .........53 3.2.2 System Information .................... ... ... ... .... ... ..
P-2302HW/HWL-P1 Series User’s Guide Table of Contents 17 5.2.5 One-T ouch Intelligent Se curity T echnology (OTIST ) ..... .......... ......... ....... .. 92 5.3 Additional Wireles s T erms ......... ....................... ................... .....
P-2302HW/HWL-P1 Series User’s Guide 18 Table of Contents 7.2.6 LAN Advanc ed Screen ........ ............. ................... ....................... ............. 127 Chapter 8 NA T ....................................... .........................
P-2302HW/HWL-P1 Series User’s Guide Table of Contents 19 9.1.1 1.3 DSCP and Per-Hop Behavior .................. ....................... ............. 145 9.1.1 1.4 VLAN .......... ....................... ................... .................... ....
P-2302HW/HWL-P1 Series User’s Guide 20 Table of Contents 13.4.2 PSTN Phone T o V oIP Phone ......... ....................... ................... ............. 175 13.4.3 PSTN Phone T o PSTN Phone via V oIP ... ................... ...................
P-2302HW/HWL-P1 Series User’s Guide Table of Contents 21 16.2.1 IP S t atic Route Screen .............. ...... ................... .................... ................ 201 16.2.2 IP S t atic Route Edit Screen ...... ......... .................... .
P-2302HW/HWL-P1 Series User’s Guide 22 Table of Contents 18.3.5 Security Scre en .... .................... ................... ................... .................... ...226 Chapter 19 UPnP ..........................................................
P-2302HW/HWL-P1 Series User’s Guide Table of Contents 23 Chapter 22 T ools ............................................... ........................................... ............................ 265 22.1 T ools Overview ..... ................... ..
P-2302HW/HWL-P1 Series User’s Guide 24 Table of Contents.
P-2302HW/HWL-P1 Series User’s Guide List of Figure s 25 List of Figures Figure 1 ZyXEL Device’s V oIP Features ...... ...... .................... ................... ................... ....... 37 Figure 2 ZyXEL Device as a V oIP T runking Gateway .
P-2302HW/HWL-P1 Series User’s Guide 26 List of Figures Figure 39 Wireless LAN: General .. ............. ... ....................... ................... ................... ....... 93 Figure 40 Wireless: No Security ......... .................... ...
P-2302HW/HWL-P1 Series User’s Guide List of Figure s 27 Figure 82 V oIP > Phone > Region ............... ... ... .... ... ... ................... .... ... ... ... .... ... ... ............. 163 Figure 83 V oIP > Phone Book > Incoming Call Policy .
P-2302HW/HWL-P1 Series User’s Guide 28 List of Figures Figure 125 Add/Remove Progra ms: Windows Setup: Communication ..... .......................... 231 Figure 126 Add/Remove Progra ms: Windows Setup: Communication: Components ........ 231 Figure 127 Network Connections .
P-2302HW/HWL-P1 Series User’s Guide List of Figure s 29 Figure 168 Windows XP: St art Menu ........ ...................... .................... ...................... .......... 291 Figure 169 Windows XP: Control P anel ....... .....................
P-2302HW/HWL-P1 Series User’s Guide 30 List of Figures.
P-2302HW/HWL-P1 Series User’s Guide List of Tables 31 List of T ables T able 1 LED Descriptions ......... ...................... .................... ...................... ....................... ... 40 T able 2 Web Configurator Icons in the T itle Bar .
P-2302HW/HWL-P1 Series User’s Guide 32 List of Tables T able 39 Network > Wireless LAN > OTIST ... ....................... ...................... ....................... 99 T able 40 MAC Address Filter ......................... ...............
P-2302HW/HWL-P1 Series User’s Guide List of Tables 33 T able 82 Security > Content Filter > Sc hedule ................... ................... ................... .......... 199 T able 83 Management > S tatic Route > IP S tatic Route ....
P-2302HW/HWL-P1 Series User’s Guide 34 List of Tables T able 125 Maintenance > T ools > Firmware .. ....................... ...................... ....................... 266 T able 126 Maintenance > T ools > Configuration ...... .......
P-2302HW/HWL-P1 Series User’s Guide Preface 35 Preface Congratulations on your purchase of the P-2302HW/HWL-P1 802.1 1b/g W ireless V oIP Stat ion Gateway.
P-2302HW/HWL-P1 Series User’s Guide 36 Preface Graphics Icons Key ZyXEL Device Computer Notebook Computer Server Switch Router T elephon e Modem T runking Gateway.
P-2302HW/HWL-P1 Series User’s Guide Chapter 1 Introducing the ZyXEL Device 37 C HAPTER 1 Introducing the ZyXEL Device This chapter introduces the main applications and feat ures of the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide 38 Chapter 1 Introducing the ZyXEL Device 1.1.2 V oIP T runking Gatew ay V oIP trunking allows you to use your ZyXEL Device as a gateway between V oIP and PSTN networks. Figure 2 ZyXEL Device as a V oIP Trunking Gate way In this example, you use y our analog phone ( A ) to call the ZyXEL Device ( B ).
P-2302HW/HWL-P1 Series User’s Guide Chapter 1 Introducing the ZyXEL Device 39 Use content filtering to block access to specif ic web sites, with UR L ’ s containing keywords that you specify .
P-2302HW/HWL-P1 Series User’s Guide 40 Chapter 1 Introducing the ZyXEL Device 1.2 LEDs (Light s) The following graphic disp lays the labels of the LEDs.
P-2302HW/HWL-P1 Series User’s Guide Chapter 1 Introducing the ZyXEL Device 41 W AN Green On The ZyXEL Device has an Ethernet connection with the cable/ DSL modem. Blinking The ZyXEL Device is sending/ receiving data to /from the cable/ DSL modem. Off The ZyXEL Device d oesn’t have an Ethernet co nnection with the cable/DSL modem.
P-2302HW/HWL-P1 Series User’s Guide 42 Chapter 1 Introducing the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide Chapter 2 Introdu cing the Web Configurator 43 C HAPTER 2 Introducing the W eb Configurator This chapter describes how to access the ZyX EL Device web configurator and provides an overview of its screens.
P-2302HW/HWL-P1 Series User’s Guide 44 Chapter 2 Introducing the Web Configurator Figure 5 Login Screen 4 T ype "1234" (default) as the password, and click Login . In some versions, the default password appears automatically - if this is the case, click Login .
P-2302HW/HWL-P1 Series User’s Guide Chapter 2 Introdu cing the Web Configurator 45 Figure 7 Select Mode Screen 6 In the Options screen, • Click Go to W izard setup if you are logging in for the firs t ti me or if you want to make basic changes. See Chapter 3 on page 51 for more information.
P-2302HW/HWL-P1 Series User’s Guide 46 Chapter 2 Introducing the Web Configurator 2 P ress and hold the RESET button for ten seconds or until all the LEDs except for the WLAN begin to blink. Release the RESET button when the POWER LED begins to blink.
P-2302HW/HWL-P1 Series User’s Guide Chapter 2 Introdu cing the Web Configurator 47 The icons provide th e following functions. 2.4.2 Navigation Panel Use the men u items on the na vigation panel to open screens to configu re ZyXEL Device features. The following tables describe each menu item.
P-2302HW/HWL-P1 Series User’s Guide 48 Chapter 2 Introducing the Web Configurator Vo I P SIP SIP Settings Use this screen to configure your ZyXEL Device’s V oice over IP settings. QoS Use this screen to configure your ZyXEL Device’s Quality of Service settings.
P-2302HW/HWL-P1 Series User’s Guide Chapter 2 Introdu cing the Web Configurator 49 2.4.3 Main Window The main window shows the screen you select in the navigation panel. It is discussed in more detail in the rest of this document. Right after you log in, the St a t u s screen is displayed.
P-2302HW/HWL-P1 Series User’s Guide 50 Chapter 2 Introducing the Web Configurator.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 51 C HAPTER 3 W izard Setup This chapter provides information on the wizards in the web configurator .
P-2302HW/HWL-P1 Series User’s Guide 52 Chapter 3 W izard Setup Figure 9 Main Wizard Screen The following table describes the labels in this screen. 3.2 Connection Wizard Use this wizard to set up your Internet connection. See Chapter 6 on pa ge 1 05 for more information.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 53 Note: Y ou cannot use the Connection Wizard to set up your Internet connection in the following situations: - Y ou subscribe to a Roadrunner service. - Y ou use PPPoE encapsulation and the remote server cannot be discovered automatically .
P-2302HW/HWL-P1 Series User’s Guide 54 Chapter 3 W izard Setup Figure 1 1 Connection Wizard > System Information The following table describes the labels in this screen. 3.2.3 Wireless Network Setup Use the following screens to set up your wireless LAN.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 55 Figure 12 Wireless LAN The following table describes the labels in this screen. 3.2.3.2 Manually Assi gn a WP A or WP A2 key Choose Extend(WP A-PSK with customized key) or Extend(WP A2-PSK with customized key) in the W ireless LAN setup scree n to set up a Pr e-Shared Key .
P-2302HW/HWL-P1 Series User’s Guide 56 Chapter 3 W izard Setup Figure 13 Manually Assign a WP A/WP A2 key The following table describes the labels in this screen. 3.2.3.3 Manually Assign a WEP key Choose Basic(WEP) to setup WEP encr yption parameters.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 57 The following table describes the labels in this screen. 3.2.3.4 OTIST Screen This screen allows you to au tomatically configure security settings on your ZyXEL Device and the wireless clients that want to connect to it.
P-2302HW/HWL-P1 Series User’s Guide 58 Chapter 3 W izard Setup The following table describes the labels in this screen. 3.2.4 ISP Parameters This screen depends on the Connection T ype you select. 3.2.4.1 Ethernet Note: Y ou cannot use the Connection Wizard if you subscrib e to a Roadrunner service.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 59 Figure 16 Connection Wizard > ISP Par ameters (Ethernet) The following table describes the labels in this screen. 3.2.4.2 PPPoE Point-to-Point Protocol ov er Ethernet (PPPoE) funct ions as a dial-u p connection.
P-2302HW/HWL-P1 Series User’s Guide 60 Chapter 3 W izard Setup Figure 17 Connection Wizard > ISP Parameters (PPPoE) The following table describes the labels in this screen. Table 12 Connection Wizard > ISP Parameters (PPPoE) LABEL DESCRIPTION Connection T ype Select PPP over Ethernet .
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 61 3.2.5 Y our IP Address Figure 18 Connection Wizard > IP Add ress The following table describes the labels in this screen. 3.2.6 W AN IP Address Assignment This screen appears if you s elect Use fixed IP address pr ovided by your ISP in the previous screen.
P-2302HW/HWL-P1 Series User’s Guide 62 Chapter 3 W izard Setup 3.2.6.1 Ethernet Figure 19 Connection Wizard > IP Add ress (Ethernet) The following table describes the labels in this screen. Table 14 Connection Wizard > IP Addr ess (Ethernet) LABEL DESCRIPTION My W AN IP Address Enter the IP address provided by your ISP .
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 63 3.2.6.2 PPPoE Note: Y ou cannot use the Connection Wizard if th e PPPoE remote server canno t be discovered automatically . First DNS Server Second DNS Server Third DNS Server Select From ISP if your ISP dynamically assign s DNS server information .
P-2302HW/HWL-P1 Series User’s Guide 64 Chapter 3 W izard Setup Figure 20 Connection Wizard > IP Address (PPPoE) The following table describes the labels in this screen. Table 15 Connection Wizard > IP Address (PPPoE) LABEL DESCRIPTION My W AN IP Address Enter the IP address provided by your ISP .
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 65 3.2.7 MAC Address Figure 21 Connection Wizard > MAC Add ress The following table describes the labels in this screen. Table 16 Connection Wiza rd > MAC Address LABEL DESCRIPTION Factory default Select this if you want to use the default MAC address for the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide 66 Chapter 3 W izard Setup 3.2.8 Finish Figure 22 Connection Wizard > Finish The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 67 3.3.1 SIP Settings Figure 23 V oIP Setup W izard > SIP Settings The following table describes the labels in this screen. Table 18 VoIP Setup Wizard > SIP S ettings LABEL DESCRIPTION SIP1 Settings SIP2 Settings SIP Number Enter your SIP number .
P-2302HW/HWL-P1 Series User’s Guide 68 Chapter 3 W izard Setup 3.3.2 Registration Complete This screen depends on whether or not the Zy XEL Device successfully registered your SIP account(s). Check here to set up SIP2 settings This field is available in th e SIP1 Settings screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 69 Figure 25 V oIP Set up Wizard > Registration Complete (Success) The following table describes the labels in this screen. If the ZyXEL Device cannot register your SI P account(s), see the Quick Start Guide for troubleshooting sug gestions.
P-2302HW/HWL-P1 Series User’s Guide 70 Chapter 3 W izard Setup Figure 26 V oIP Setup Wizard > Registration Complete (Fail) The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 71 3.4.1 Welcome Figure 27 Bandwidt h Management Wizard > Welcome The following table describes the labels in this screen. Table 21 Bandwidth Management Wiza rd > Welcome LABEL DESCRIPTION < Back Click this to go to the previous screen.
P-2302HW/HWL-P1 Series User’s Guide 72 Chapter 3 W izard Setup 3.4.2 General Information Figure 28 Bandwidt h Management Wizard > General Information The following table describes the labels in this screen. Table 22 Bandwidth Mana gement Wizard > General Infor mation LABEL DESCRIPTION Active Select this to enable bandwidth management.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 73 3.4.3 Services Setup Figure 29 Bandwidt h Management Wizard > Services Setup The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide 74 Chapter 3 W izard Setup 3.4.4 Priority Setup Figure 30 Bandwidt h Management Wizard > Priority Setup The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 3 Wizard Setup 75 3.4.5 Finish Figure 31 Bandwidt h Management Wizard > Finish The following table describes the labels in this screen. Table 25 Bandwidth Management Wizard > Fini sh LABEL DESCRIPTION Finish Click this to close thi s screen and return to the main screen.
P-2302HW/HWL-P1 Series User’s Guide 76 Chapter 3 W izard Setup.
P-2302HW/HWL-P1 Series User’s Guide Chapter 4 Status Screens 77 C HAPTER 4 S t atus Screens Use the St a t u s sc reens to look at the current st atus of the device, system resources, interfaces (LAN and W AN), and SIP accounts. Y ou can also register and unregister SIP accounts.
P-2302HW/HWL-P1 Series User’s Guide 78 Chapter 4 Status Scr eens Figure 32 S t atus Screen Each field is described in the following table. Table 26 Status Scree n LABEL DESCRIPTION Refresh Interval Enter how often you want the ZyXEL Device to update this screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 4 Status Screens 79 DHCP This field displays what DHCP services the ZyXEL Device is using in the WAN. Choices are: Client - The ZyXEL Device is a DHCP cli ent in the WAN. It s IP address comes from a DHCP server on the WAN.
P-2302HW/HWL-P1 Series User’s Guide 80 Chapter 4 Status Scr eens Rate If the interface uses Ethernet encapsula tion, this column displays the port s peed and the Ethernet duple x setting. Duplex settings are: Full - The ZyXEL Device is using full-dupl ex Ethernet.
P-2302HW/HWL-P1 Series User’s Guide Chapter 4 Status Screens 81 4.2 Any IP T able Window This screen displays the IP address of each co mputer that is using the ZyXEL Device via the any IP feature. T o access this screen, open the St a t u s screen (see Section 4.
P-2302HW/HWL-P1 Series User’s Guide 82 Chapter 4 Status Scr eens Figure 34 DHCP T able Window Each field is described in the following table. 4.4 V oIP St atistics Window This screen displays SIP registra tion information, status of calls and V oIP traffic statistics.
P-2302HW/HWL-P1 Series User’s Guide Chapter 4 Status Screens 83 Figure 35 V oIP S tatistics Window Each field is described in the following table. Table 29 VoIP Statistics Window LABEL DESCRIPTION SIP S t atus Account This column displays each SIP account in the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide 84 Chapter 4 Status Scr eens 4.5 BW MGMT Monitor Window This screen displays informa tion regarding the amount of traf fic going throug h the ZyXEL Device. T o access this screen, open the St a t u s screen (see Section 4 .
P-2302HW/HWL-P1 Series User’s Guide Chapter 4 Status Screens 85 Figure 36 BW MGMT Monitor Window The types of traffic shown in this screen do not depend on your settings in the Bandwidth Management W izard or in Bandwidth MGMT . Each field is describe d in the following table.
P-2302HW/HWL-P1 Series User’s Guide 86 Chapter 4 Status Scr eens 4.6 Packet S t atistics Window This screen displays the status of ports, system up time and statistics regarding traf fic through the ZyXEL Device. T o access this screen, open the St a t u s screen (see Section 4.
P-2302HW/HWL-P1 Series User’s Guide Chapter 4 Status Screens 87 Figure 37 Packet S t atistics Window Each field is described in the following table. Table 31 Packet Statistics Window LABEL DESCRIPTION Port This field displays each port in the ZyXEL Device .
P-2302HW/HWL-P1 Series User’s Guide 88 Chapter 4 Status Scr eens System Up T ime This field displays how long the ZyXEL Device has been running since it last started up. The ZyXEL Devi ce starts up when you plug it in, when you restart it ( Maintenance > T ools > Res t art ), or when you reset it (see Section 2.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 89 C HAPTER 5 W ireless LAN This chapter discusses how to configure the wire less network settings in your ZyXEL Device. 5.1 Wireless Network Overview The following figure provides an example o f a wireless n etwork.
P-2302HW/HWL-P1 Series User’s Guide 90 Chapter 5 W ireless LAN Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 5.2 Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 91 Unauthorized wireless devices can still see the information that is sent in the wireless network, even if they cannot use the wireless network. Furthermore, there are ways for unauthorized wireless users to get a valid user name and p assword.
P-2302HW/HWL-P1 Series User’s Guide 92 Chapter 5 W ireless LAN 5.2.5 One-T ouch Intelligent S ecurity T echnology (OTIST) W ith ZyXEL ’ s OTIST , you set up the SS ID an d the encryption (WEP or WP A-PSK) on the ZyXEL Device. Then, the ZyXEL Device transfer s them to the devices in the wireless networks.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 93 Figure 39 Wireless LAN: General The following table describes the general wireless LAN labels in this screen. 5.4.1 No Security Select No Security to allow wireless stations to commun icate with the access points without any data encryption.
P-2302HW/HWL-P1 Series User’s Guide 94 Chapter 5 W ireless LAN Note: If you do not enable an y wireless security on your ZyXEL Device, your netwo rk is accessible to any wireless network ing device tha t is within range. Figure 40 Wireless: No Security The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 95 Figure 41 Wireless: S tatic WEP Encryption The following table describes the wireless LAN security labels in this screen. Table 36 Wireless: Static WEP Encryption LABEL DESCRIPTION Security Mode Choose St atic WEP from the drop-down list box.
P-2302HW/HWL-P1 Series User’s Guide 96 Chapter 5 W ireless LAN 5.4.3 WP A(2)-PSK In order to configure and enable WP A-PSK authentication; click Network > Wireless LAN to display the General screen. Select WP A-PSK or WP A2-PSK from the Security Mod e list.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 97 5.4.4 WP A(2) Auth en tication Screen In order to configure and enable WP A Authentication; click the Wir eless LAN link under Network to display the Wir eless screen. Sele ct WP A or WP A2 from the Se curity list.
P-2302HW/HWL-P1 Series User’s Guide 98 Chapter 5 W ireless LAN The following table describes the wireless LAN security labels in this screen. Table 38 Wireless: WPA(2) LABEL DESCRIPTION Security Mode Choose WP A or WP A2 from the drop-down list box.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 99 5.5 OTIST Screen Use this screen to set up and start OTIST on th e ZyXEL Device in your wireless network. T o open this screen, click Network > Wir eless LAN > OTIST . Figure 44 Network > Wireless LAN > OTIST The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide 100 Chapter 5 Wireless LAN Figure 45 Example: Wireless Client OTIST Screen T o start OTIST in the device, click St a r t in this screen. Note: Y ou must c lick Start in the ZyXEL Device and in the wireless device(s) within three minutes of each other .
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 101 Figure 48 OTIST : In Progress on the Wireless Device These screens close when the tra ns fer is complete. 5.5.1 Notes on OTIST 1 If you enable OTIST in a wireless device, you see this screen each time you start the utility .
P-2302HW/HWL-P1 Series User’s Guide 102 Chapter 5 Wireless LAN Figure 50 MAC Addres s Filter The following table describes the labels in this menu. Table 40 MAC Address F ilter LABEL DESCRIPTION MAC Address Filter Active Select the check box to enable MAC address filtering.
P-2302HW/HWL-P1 Series User’s Guide Chapter 5 Wireless LAN 103 5.7 Wireless LAN Advanced Setup Use this screen to configure adva nced wireless settings, click the Advanced S etup button in the General screen. The screen appears as shown. Figure 51 Advanced The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide 104 Chapter 5 Wireless LAN.
P-2302HW/HWL-P1 Series User’s Guide Chapter 6 WAN 105 C HAPTER 6 WA N Use these screens to set up th e ZyX EL Device on the W AN. 6.1 W AN Overview Y ou can configure the Internet connection, DNS servers, and how the ZyXEL Device sends routing information using RIP .
P-2302HW/HWL-P1 Series User’s Guide 106 Chapter 6 WAN 6.1.2 W AN IP Address Assignment Every computer on the Internet must have a unique IP address. If your networks are is olated from the Internet, for instance, only between your two branch of fices, you can assign any IP addresses to the hosts without problems.
P-2302HW/HWL-P1 Series User’s Guide Chapter 6 WAN 107 6.1.5 DNS Server Address Assignment The Domain Name entry is what is propagated to th e DHCP clients on the LAN.
P-2302HW/HWL-P1 Series User’s Guide 108 Chapter 6 WAN Figure 52 Network > W AN > Internet Connection (Ether net) Note: Some ISPs, such as T elstra, send UDP h eartbeat packet s to verify that the customer is still online. In this case, create a WA N t o L A N firewall rule for those packet s.
P-2302HW/HWL-P1 Series User’s Guide Chapter 6 WAN 109 6.2.2 W AN Internet Connec tion Screen (Roadrunner) Use this screen to set up an Et hernet co nnection using Roadru nn er service with the ISP . T o access this screen, click Network > W AN > Internet Connection .
P-2302HW/HWL-P1 Series User’s Guide 110 Chapter 6 WAN 6.2.3 W AN Internet Connection Screen (PPPoE) Use this screen to set up a PPPoE connection with the ISP .
P-2302HW/HWL-P1 Series User’s Guide Chapter 6 WAN 111 Figure 54 Network > W AN > Intern et Connection (PPPoE) Each field is described in the following table. Table 45 Network > WAN > Internet Connection (PPPoE) LABEL DESCRIPTION ISP Parameters for Internet Access Encapsulation Select PPP over Ethernet .
P-2302HW/HWL-P1 Series User’s Guide 112 Chapter 6 WAN 6.2.4 W AN Advanced Screen Use this screen to set up DNS servers, RIP , and W indows Networ king policies for the W AN. T o access this screen, click Network > W AN > Advan ced . Get automatically from ISP Select this if your ISP did not assign you a static IP address.
P-2302HW/HWL-P1 Series User’s Guide Chapter 6 WAN 113 Figure 55 Network > W AN > Advanc ed Each field is described in the following table. Table 46 Network > WAN > Advanced LABEL DESCRIPTION DNS Servers DNS (Domain Na me System) manages the relationships between domain names and IP addresses.
P-2302HW/HWL-P1 Series User’s Guide 114 Chapter 6 WAN 6.2.5 W AN T raffic Redirect Screen Use this screen to specify a backup gateway in case the default gatewa y ( your ISP) is not available. T o access this screen, click Network > W AN > T raffic Redir ect .
P-2302HW/HWL-P1 Series User’s Guide Chapter 6 WAN 115 Figure 56 Networ k > W AN > T raff ic Redir ect Each field is described in the following table. Table 47 Network > WAN > Traffic Redirect LABEL DESCRIPTION Active Select this to set up a back up gateway in case the default gateway is not available.
P-2302HW/HWL-P1 Series User’s Guide 116 Chapter 6 WAN.
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 117 C HAPTER 7 LAN Use these screens to s et up the ZyXEL De vice on the LAN. Y ou can configure its IP address and subnet mask, DHCP services, and other su bnets. Y ou can also control how the ZyXEL Device sends routing information using RIP , and you can enable and disable Any IP .
P-2302HW/HWL-P1 Series User’s Guide 118 Chapter 7 LAN 7.1.2 DHCP Setup DHCP (Dynamic Host Configuration Protocol , RFC 2131 and RFC 2132) allows indiv idual clients to obtain TCP/IP configuration at start-up from a server . Y ou can configure the ZyXEL Device as a DHCP server or disable it.
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 119 If the Primary and Secondary DNS Server fields in the LAN Setup screen are not specified, for instance, left as 0.0.0.0, the ZyXEL Device tells the DHCP clients that it itself is the DNS server .
P-2302HW/HWL-P1 Series User’s Guide 120 Chapter 7 LAN 224.0.0.0 is not assigned to any group and is used by IP multicast computers. The address 224.0.0.1 is used for query messages and is assi gned to the permanent group of all IP hosts (including gateways).
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 121 Figure 57 Any IP Example The Any IP fe ature does n ot apply to a computer u sing either a dynami c IP address or a static IP address tha t is in the sa me subnet as the ZyXEL Devi ce’ s IP address.
P-2302HW/HWL-P1 Series User’s Guide 122 Chapter 7 LAN After all the routing information is updated, the computer can access the ZyXEL Device and the Internet as if it is in th e same subnet as the ZyXEL Device. 7.2 LAN Screens 7.2.1 LAN IP Screen Use this screen to set up the ZyXEL Device’ s IP address and subnet mask.
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 123 Figure 59 Network > LAN > DHCP Setup Each field is described in the following table. 7.2.3 LAN St atic DHCP Screen Note: This screen has no ef fect if the DHCP serv er is not enabled. Y ou can enable it in Network > LAN > DHCP Setup .
P-2302HW/HWL-P1 Series User’s Guide 124 Chapter 7 LAN Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer on the LAN. T o access this screen, click Network > LAN > S tatic DHCP . Figure 60 Network > LAN > S tatic DHCP Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 125 Figure 61 Network > LAN > Client List Each field is described in the following table. 7.2.5 LAN IP Alias Screen Use this screen to add subnets on the LAN port . Y ou can also control what routing informati on is sent and received by each subnet.
P-2302HW/HWL-P1 Series User’s Guide 126 Chapter 7 LAN Figure 62 Network > LAN > IP Alias Each field is described in the following table. Table 52 Network > LAN > IP Alias LABEL DESCRIPTION IP Alias 1 IP Alias 1 Select this to add the specif ied subnet to the LAN port.
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 127 7.2.6 LAN Advanced Screen Use this screen to add subnets on the LAN port . Y ou can also control what routing informati on is sent and received by each subnet. T o access this screen, click Network > LAN > Advanced .
P-2302HW/HWL-P1 Series User’s Guide 128 Chapter 7 LAN Figure 63 Network > LA N > Advanced Each field is described in the following table. Table 53 Network > LAN > Advanced LABEL DESCRIPT.
P-2302HW/HWL-P1 Series User’s Guide Chapter 7 LAN 129 Allow between LAN and W AN Select this check box if you want the ZyXEL Device to send NetBIOS (Network Basic Input/Output System) packets between the LAN and W AN. Y ou should also make sure that NetBIOS packets are not blocked in Security > Firewall > Services .
P-2302HW/HWL-P1 Series User’s Guide 130 Chapter 7 LAN.
P-2302HW/HWL-P1 Series User’s Guide Chapter 8 NAT 131 C HAPTER 8 NA T This chapter discusses how to configure NA T on the ZyXEL Device. 8.1 NA T Overview Use these screens to configure port forwarding and trigger ports for the ZyXEL Device. Y ou can also enable and disable SIP , FTP , and H.
P-2302HW/HWL-P1 Series User’s Guide 132 Chapter 8 NAT Figure 64 Multiple Servers Be hind NA T Example 8.1.2 T rigger Port Forwarding Some services use a dedicated range of ports on the client side and a dedica ted range of ports on the server side.
P-2302HW/HWL-P1 Series User’s Guide Chapter 8 NAT 133 1 Jane requests a file from the Real Audio server (port 7070). 2 Port 7070 is a “trigger” port and causes the ZyXEL Device to record Jane’ s computer IP address. The ZyXEL Device asso ciates Jane's compute r IP ad dress with the "incoming" port range of 6970- 71 70.
P-2302HW/HWL-P1 Series User’s Guide 134 Chapter 8 NAT Figure 66 Network > NA T > General Each field is described in the following table. 8.2.2 NA T Port Forwarding Screen Use this screen to look at the current port-fo rwarding rules in the ZyXEL Device, and to enable, disable, activate, and de activate each one.
P-2302HW/HWL-P1 Series User’s Guide Chapter 8 NAT 135 Figure 67 Network > NA T > Port Forwar ding Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide 136 Chapter 8 NAT 8.2.3 NA T Port Forwarding Edit Screen Use this screen to activ ate , de ac tiv ate, and edit each port-forwarding rule in the ZyXEL Device. T o access this screen, click an Edit icon in Network > NA T > Port Forwarding .
P-2302HW/HWL-P1 Series User’s Guide Chapter 8 NAT 137 Figure 69 Network > NA T > Tr igger Port Each field is described in the following table. Table 57 Network > NAT > Trigger Por t LABEL DESCRIPTION Name Enter a name to iden tify this rule.
P-2302HW/HWL-P1 Series User’s Guide 138 Chapter 8 NAT 8.2.5 NA T ALG Screen Use this screen to enable and disable SIP (V oIP) , FTP (file transfer), an d H.323 (aud io-visual) ALG in the ZyXEL Device. T o access this screen, click Network > NA T > ALG .
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 139 C HAPTER 9 SIP Use these screens to set up your SIP a ccounts and to configure QoS settings. 9.1 SIP Overview 9.1.1 Introduction to V oIP V oIP (V oice over IP) is the sending of voice sign als over the Internet Protocol.
P-2302HW/HWL-P1 Series User’s Guide 140 Chapter 9 SIP 9.1.3.2 SIP Service Domain The SIP service domain of the V oIP service provider (the company that lets you mak e phone calls over the Internet) is the domain name in a SIP URI. For example, if the SIP address is 1 12233 4455@V oIP-provider .
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 141 9.1.5.1 SIP User Agent A SIP user agent can make and receive V oIP tele phone calls. This means that SIP can be used for peer-to-peer communications even though it is a client-server protocol. In the following figure, either A or B can act as a SIP user agent client to initiate a call.
P-2302HW/HWL-P1 Series User’s Guide 142 Chapter 9 SIP 9.1.5.3 SIP Re direct Server A SIP redirect server accepts SIP requests, translates the destina tion address to an IP address and sends the translated IP address back to th e device that sent the request.
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 143 9.1.7 NA T and SIP The ZyXEL Device must register its public IP ad dress with a SIP register server . If the re is a NA T router between the ZyXEL Device and th e SIP register server , the ZyXEL Device probably has a private IP address.
P-2302HW/HWL-P1 Series User’s Guide 144 Chapter 9 SIP Figure 74 STUN 9.1.7.4 Outbound Proxy Y our V oIP service provider may ho st a SIP o utboun d pro xy serv er to handle all of the ZyXEL Device’ s V oIP traffic. This allows the ZyXEL De vice to work with any typ e of NA T router and eliminates the need for STUN or a SIP ALG .
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 145 9.1.10 MWI (Message W a iting Indication) Enable Message W aiting Indica tion (MWI) enables your phone to give you a message–waiting (beeping) dial tone when you have one or more voice message s.
P-2302HW/HWL-P1 Series User’s Guide 146 Chapter 9 SIP The DSCP value determines the forwardi ng behavior , the PHB (Per -Hop Behavior), that each packet gets across the DiffServ network. Based on the marking rule, dif f erent kinds of traffic can be marked for different priorities of fo rwarding.
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 147 Figure 76 V oIP > SIP > SIP Settings Each field is described in the following table. Table 60 VoIP > SIP > SIP Settings LABEL DESCRIPTION SIP Account Select the SIP account you want to see in this screen.
P-2302HW/HWL-P1 Series User’s Guide 148 Chapter 9 SIP 9.2.2 Advanced SIP Setup Screen Use this screen to maintain adva nced settings for each SIP ac coun t. T o access this screen, click Advanced Setup in V oIP > SIP > SIP Settings . Send Caller ID Select this if you want to send identification when you make V oIP phone ca lls.
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 149 Figure 77 V oIP > SIP > SIP Settings > Advanced.
P-2302HW/HWL-P1 Series User’s Guide 150 Chapter 9 SIP Each field is described in the following table. Table 61 VoIP > SIP > SIP Settings > Advanced LABEL DESCRIPTION SIP Account This field displays the SIP account you see in this screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 151 DTMF Mode Control how the ZyXEL Device handles the tone s that your telephone makes when you push its buttons. Y ou should use the same mode your V oIP service provider uses. RFC 2833 - send the DTMF tones in RTP packets PCM - send the DTMF tones in the voic e data stream.
P-2302HW/HWL-P1 Series User’s Guide 152 Chapter 9 SIP 9.2.3 SIP QoS Screen Use this screen to maintain T oS and VLAN se ttings for the ZyXEL De vice. T o access this screen, click V oIP > SIP > QoS . Keep Alive Interval Enter how often (in seconds) the ZyXEL Devi ce sh ould send SIP notify messages to the SIP server .
P-2302HW/HWL-P1 Series User’s Guide Chapter 9 SIP 153 Figure 78 V oIP > SIP > QoS Each field is described in the following table. Table 62 VoIP > SIP > QoS LABEL DESCRIPTION SIP TOS Priority Setting Enter the priority for SIP voice transmissi ons.
P-2302HW/HWL-P1 Series User’s Guide 154 Chapter 9 SIP.
P-2302HW/HWL-P1 Series User’s Guide Chapter 10 Phone 155 C HAPTER 10 Phone Use these screens to configure the phones you use to make phone calls. 10.1 Phone Overview Y ou can configure the volume, ec ho cancellation and V AD settings for each individual phone port on the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide 156 Chapter 1 0 Phone Note: T o t ake full advantage of the supplementar y phone services available through the ZyXEL Device's phone port s, you may need to subscribe to th e services from your V oIP service provider .
P-2302HW/HWL-P1 Series User’s Guide Chapter 10 Phone 157 Press the flash key and then “0” to disconnect th e call presently on hold and keep the current call on line. Press the flash key and then “1” to disconnect th e current call and resume the call on hold.
P-2302HW/HWL-P1 Series User’s Guide 158 Chapter 1 0 Phone 10.1.3.3 USA T ype S upplement ary Services This section describes how to use su pplementary phone services with the USA T ype Call Service Mode . Commands for supplementary serv ices are listed in the table below .
P-2302HW/HWL-P1 Series User’s Guide Chapter 10 Phone 159 1 When you are o n the phone talk ing to someone, place the fl ash key to put the caller on hold and get a di al tone.
P-2302HW/HWL-P1 Series User’s Guide 160 Chapter 1 0 Phone 10.2.2 Advanced Anal og Phone Setup Screen Use this screen to edit advanced settings for eac h phone port. T o access this screen, click Advanced Setup in V oIP > Phone > Analog Phone .
P-2302HW/HWL-P1 Series User’s Guide Chapter 10 Phone 161 Figure 80 V oIP > Phone > Analog Phone > Advanced Each field is described in the following table. Table 66 VoIP > Phone > Ana log Phone > Advanced LABEL DESCRIPTION Analog Phone This field displays th e phone port you see in this screen.
P-2302HW/HWL-P1 Series User’s Guide 162 Chapter 1 0 Phone 10.2.3 Common Phone Settings Screen Use this screen to activate and deactivate im mediate dialing. T o access this screen, click Vo I P > Phone > Common . Figure 81 V oIP > Phone > Common Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 10 Phone 163 Figure 82 V oIP > Phone > Region Each field is described in the following table. Table 68 VoIP > Phone > Reg ion LABEL DESCRIPTION Region Settings Select the place in which the ZyXEL Device is located.
P-2302HW/HWL-P1 Series User’s Guide 164 Chapter 1 0 Phone.
P-2302HW/HWL-P1 Series User’s Guide Chapter 11 Phone Book 165 C HAPTER 11 Phone Book Use these screens to maintain call-forw arding rules and speed-dial settings . 1 1 .1 Phone Book Overview Speed dial provides shortcuts for dialing frequently used (V oIP) phone numbers.
P-2302HW/HWL-P1 Series User’s Guide 166 Chapter 11 Phone Book Figure 83 V oIP > Phone Book > Incoming Call Policy Y ou can create two sets of c all-forwarding rules. Each one is s tored in a call-fo rward ing tab le. Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 11 Phone Book 167 1 1.2.2 S peed Dial Screen Y ou have to create speed-dial entries if you want to make peer-to-peer calls or call SIP numbers that use letters. Y ou can also create speed-dial entries for frequently-used SIP phone numbers.
P-2302HW/HWL-P1 Series User’s Guide 168 Chapter 11 Phone Book Figure 84 V oIP > Phone Book > Sp eed Dial Each field is described in the following table. Table 70 VoIP > Phone Book > Spe ed Dial LABEL DESCRIPTION S peed Dial Use this section to create or edit speed-dial entrie s.
P-2302HW/HWL-P1 Series User’s Guide Chapter 11 Phone Book 169 Destination This field is blank, if the speed-dial entry uses one of your SIP accounts. Otherwise, this field shows the IP addre ss or domain name of the SIP server or other party . (This field corresponds with the Ty p e fi eld in the Speed Dial section.
P-2302HW/HWL-P1 Series User’s Guide 170 Chapter 11 Phone Book.
P-2302HW/HWL-P1 Series User’s Guide Chapter 12 PSTN Line 171 C HAPTER 12 PSTN Line This chapter applies to P-2302H WL-P 1 models only . Use this screen to set up the PSTN line used to make regular phone calls. Th e se phone calls do not use the Internet.
P-2302HW/HWL-P1 Series User’s Guide 172 Chapter 12 PSTN Line Figure 85 V oIP > PSTN Line > General Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 173 C HAPTER 13 V oIP T runking Use these screens to configure V oIP trunking on your ZyXEL Device. 13.1 V oIP T runking Overview V oIP trunking connects an IP network (like th e Internet) and the Pub lic Switched T elephone Network (PSTN).
P-2302HW/HWL-P1 Series User’s Guide 174 Chapter 13 VoIP Trunking Other settings controlled by the au to attendant include a time lim it to decide whether you want to forward a call from the ZyXEL Device or ca ll the phone directly connected to the ZyXE L Device.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 175 13.3 Call Rules Call rules automate the forwarding of calls, first to a remote peer device and then to PSTN phones. This is used when you make frequent calls to several PSTN numbers in the same geographic ar ea that start with the same numbers (for example an area code).
P-2302HW/HWL-P1 Series User’s Guide 176 Chapter 13 VoIP Trunking Figure 88 PSTN Phone T o V oIP Phone 13.4.3 PSTN Phone T o PSTN Phone via V o IP A PSTN phone A ma kes a call to th e ZyXEL Devi ce B . B conn ects to a peer device C and C forwards the call to a PSTN phone D .
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 177 Each field is described in the following table. 13.6 T runking Peer Call Screen Use this screen to set up outgoing authentica tion accounts for forwardi ng calls through p eer devices and incoming authenti cation accounts for forwarding calls from peer devices.
P-2302HW/HWL-P1 Series User’s Guide 178 Chapter 13 VoIP Trunking Figure 91 V oIP > Trunking > Peer Call Each field is described in the following table. Table 75 VoIP > Trunking > Peer Call LABEL DESCRIPTION Outgoing Authentication Y ou need to set up accounts for the peer dev ices you use in V oIP trunking.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 179 13.7 T runking Call Rule Screen Use this screen to set up rules that determ ine which peer V oIP de vice your call will be forwarded to. T o access this screen, click V oIP > T runking > Call Rule .
P-2302HW/HWL-P1 Series User’s Guide 180 Chapter 13 VoIP Trunking Figure 92 V oIP > Trunking > Call Rule Each field is described in the following table. Table 76 VoIP > Trunking > Call Rule LABEL DESCRIPTION # This is a read-only index number of the call rules.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 181 13.8 V oIP T runking Example: V oIP to PSTN This example shows how to configure V oIP to PSTN trunking to save on long distance calls. 13.8.1 Background Information A company has its headquarters in city A and a br anch office in city B.
P-2302HW/HWL-P1 Series User’s Guide 182 Chapter 13 VoIP Trunking Figure 94 V oIP to PSTN Example - S peed Dial Screen 2 An outgoing authentication account n eeds to be configured. This account consis ts of the IP address and port number of the branch of fice ZyXEL Device as well as the username and password for authen tication.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 183 Figure 96 V oIP to PSTN Example - Incoming Authentication 13.8.4 Call Progression The advantage of this kind of V oIP trunking is tha.
P-2302HW/HWL-P1 Series User’s Guide 184 Chapter 13 VoIP Trunking 13.9 V oIP T runking Example: PSTN to PSTN via V oIP This example shows how to configure a PSTN to PSTN call with a V oIP link. It also shows how call rules can be used to automate V oIP trunking.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 185 Figure 98 PSTN to PSTN Example: General C onfiguration 2 An outgoing authentication account n eeds to be configured. This account consis ts of the IP address and port number of the branch of fice ZyXEL Device as well as the username and password for authen tication.
P-2302HW/HWL-P1 Series User’s Guide 186 Chapter 13 VoIP Trunking Figure 100 PSTN to PSTN Example - Call Rule 13.9.3 Configurati on Det ails: Incoming The branch office ZyXEL Device needs to have an incoming authentication account configured. This consists of a username and p assword.
P-2302HW/HWL-P1 Series User’s Guide Chapter 13 VoIP Trunking 187 Figure 101 PSTN to PSTN Example - Incoming Authentication 13.9.4 Call Progression The call is initiated by the manager dialing into the headquarter’ s ZyXEL Device via PST N.
P-2302HW/HWL-P1 Series User’s Guide 188 Chapter 13 VoIP Trunking The ZyXEL Device at A sends outgoing authentication to the remote peer device . The remote peer device confirms that the username and password match an account in its incoming authentication list.
P-2302HW/HWL-P1 Series User’s Guide Chapter 14 Firewall 189 C HAPTER 14 Firewall Use these scre en s to enab le , con f igu r e an d di sable the firewall that protects your ZyXEL Device and your LAN from unwanted or malici ous traf fic.
P-2302HW/HWL-P1 Series User’s Guide 190 Chapter 14 Fir ewall The LAN (Local Area Network) port attaches to a network of compute rs, which needs security from the outside world. These computers will ha ve access to Internet services such as e-mail, FTP and the W orld W ide W eb.
P-2302HW/HWL-P1 Series User’s Guide Chapter 14 Firewall 191 Blocked LAN-to-W AN packets are considered a lerts. Alerts are “higher priority logs” that include system errors, attacks and attempted acces s to blocked web sites. Alerts appear in red in the Vi e w L o g screen.
P-2302HW/HWL-P1 Series User’s Guide 192 Chapter 14 Fir ewall 1 A computer on the LAN initiates a connec tion by sending out a SYN packet to a receiving server on the W AN. 2 The ZyXEL Device reroutes the SYN packet through Gateway A on the LAN to the WA N .
P-2302HW/HWL-P1 Series User’s Guide Chapter 14 Firewall 193 Figure 105 IP Alias 14.3 Firewall Screens 14.3.1 General Firewall Screen Use this screen to configure the basic settings fo r your firewall. T o access this screen, click Security > Firewall > General .
P-2302HW/HWL-P1 Series User’s Guide 194 Chapter 14 Fir ewall 14.3.2 Firewall Services Screen Use this screen to enable servic e blocking, to set up the date and time service blocking is effective, and to maintain the list of services you want to bloc k.
P-2302HW/HWL-P1 Series User’s Guide Chapter 14 Firewall 195 Figure 107 Security > Firewall > Services Each field is described in the following table. Table 80 Security > Firewall > Services LABEL DESCRIPTION Service Setup Enable Services Blocking Select this to activate service blocking.
P-2302HW/HWL-P1 Series User’s Guide 196 Chapter 14 Fir ewall Clear All Click this to remove all th e services in the Blocked Services list. Schedule to Block Day to Block Select which days of the week you want the service blocking to be effective. T ime of Day to Block Select what time each day you want service blocking to be effective.
P-2302HW/HWL-P1 Series User’s Guide Chapter 15 Content Filter 197 C HAPTER 15 Content Filter Use these screens to c reate and enforce policies th at res trict access to the Internet based on content. 15.1 Content Filtering Overview Internet content filtering allows you to create and enforce Internet access policies tailored to their needs.
P-2302HW/HWL-P1 Series User’s Guide 198 Chapter 15 Con tent Filter Figure 108 Security > Content Filter > Filter Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 15 Content Filter 199 15.2.2 Content Filter Schedule Screen Use this screen to set up the sc hedule when content filtering is effective. T o access this screen, click Security > Content Filter > Schedule .
P-2302HW/HWL-P1 Series User’s Guide 200 Chapter 15 Con tent Filter.
P-2302HW/HWL-P1 Series User’s Guide Chapter 16 Static Route 201 C HAPTER 16 S t atic Route Use these screens to configure static routes in the ZyXEL Device. 16.1 S t atic Route Overview Each remote node specifies only the network to which the gateway is di rectly connected, and the ZyXEL Device has no know ledge of the networks beyo nd.
P-2302HW/HWL-P1 Series User’s Guide 202 Chapter 16 Static Route Figure 1 1 1 Management > S tatic Route > IP S t atic Route Each field is described in the following table. 16.2.2 IP St atic Route Edit Screen Use this screen to edit a static route in the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide Chapter 16 Static Route 203 Figure 1 12 Management > S tatic Route > IP S t atic Route > Edit Each field is described in the following table. Table 84 Management > Static Route > IP Static Route > Edit LABEL DESCRIPTION Route Name Enter the na me of the st atic ro ute.
P-2302HW/HWL-P1 Series User’s Guide 204 Chapter 16 Static Route.
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 205 C HAPTER 17 Bandwid th MGMT Use these screens to manage the amount of tr affic the ZyXEL Devic e routes throu gh each interface. 17.1 Bandwid th Management Overview Bandwidth management allo ws you to allocate an interface’ s outgoing capacity to specific types of traffic.
P-2302HW/HWL-P1 Series User’s Guide 206 Chapter 17 Bandwidth MGMT 17.1.2 Proportional Bandwi d th Allocation Bandwidth management allo ws you to define ho w much bandwidth each class gets; however , the actual bandwidth a llotted to each class de creases or increases in proportion to actual available bandwidth.
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 207 17.1.6 Scheduler The scheduler divides up an interface’ s bandw idth among the bandwidth classes.
P-2302HW/HWL-P1 Series User’s Guide 208 Chapter 17 Bandwidth MGMT 17.1.7.2 Maximize Ba ndwid th Usage Example Here is an example of a ZyXEL Device that has maximize bandwidth usage enabled on an interface. The following table shows each ba nd width class’ s bandwidth budget.
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 209 • Research requires more bandwidth but only gets its budgeted 2048 kbps because all of the unbudgeted and unu sed bandwidth goes to the higher priority sales and marketing classes. 17.
P-2302HW/HWL-P1 Series User’s Guide 210 Chapter 17 Bandwidth MGMT 17.1.8.1 Bandwid th Borrowing Example Here is an example of bandw idth manageme nt with classes configured for bandwidth borrowing. The classes are set up based on de partments and individuals within certain departmen ts.
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 211 If you use V oIP and NetMeeting at the same time, the device allocate s up to 500 Kbps of bandwidth to each of them befo re it allocates any bandwidth to FTP . As a result, FTP can only use bandwidth when V oIP and NetMeeting do not use all of their allocated bandwi dth.
P-2302HW/HWL-P1 Series User’s Guide 212 Chapter 17 Bandwidth MGMT Figure 1 14 Management > Bandwidth MGMT > Summary Each field is described in the following table. Table 91 Management > Bandwidth MGMT > Summary LABEL DESCRIPTION LAN Active Select this to enable bandwidth manag ement on th e LAN.
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 213 WA N Active Select this to enable bandwidth management on the WAN. Bandwid th management applies to all traffic flowing out of the router through the WAN, regardless of the traffic’ s source.
P-2302HW/HWL-P1 Series User’s Guide 214 Chapter 17 Bandwidth MGMT 17.2.2 Bandwid th Class Setup Screen Use this screen to look at the configured ba ndwidth classes by individual interface. Each interface has a permanent root class. The bandwid th budget of the root class is equal to the speed you configured on the interface (see Section 17.
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 215 17.2.3 Bandwid th Class Edit Screen Use this screen to configure a bandwidth management class. Note: For each interface, you must enable b andwidth management before you can configure classes.
P-2302HW/HWL-P1 Series User’s Guide 216 Chapter 17 Bandwidth MGMT 17.2.4 Bandwid th Monitor Screen Use this screen to look at the device’ s bandwidt h usage and allocation. T o access this screen, click Management > Bandwidth MGMT > Monitor .
P-2302HW/HWL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT 217 Figure 1 17 Management > Bandwidth MGMT > Monitor Each field is described in the following table. Table 94 Management > Bandwidth MGMT > Monit or LABEL DESCRIPTION Interface Select th e interface at which you want to look in this screen.
P-2302HW/HWL-P1 Series User’s Guide 218 Chapter 17 Bandwidth MGMT.
P-2302HW/HWL-P1 Series User’s Guide Chapter 18 Rem ot e MG M T 219 C HAPTER 18 Remote MGMT Use these screens to c ontrol which computer s can use which service s to access the ZyXEL Device on each interface.
P-2302HW/HWL-P1 Series User’s Guide 220 Chapter 18 Remote MGMT • Use the ZyXEL Device’ s W AN IP address when configuring from the W AN. • Use the ZyXEL Device’ s LA N IP a ddress when configuring from the LAN. 18.1.3 System T imeout There is a default system management idle tim eout of five minutes (three hundre d seconds).
P-2302HW/HWL-P1 Series User’s Guide Chapter 18 Rem ot e MG M T 221 18.2.2 T elnet Screen Use this screen to control T elnet access to you r ZyXEL Device. T o access this screen, click Management > Remote MGMT > T elnet . Figure 1 19 Management > Remote MGMT > T elnet Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide 222 Chapter 18 Remote MGMT Figure 120 Management > Remo te MGMT > FTP Each field is described in the following table. 18.3 SNMP Simple Network Management Protocol (SNM P) i s a protocol u sed for exch anging management information b etween network devices.
P-2302HW/HWL-P1 Series User’s Guide Chapter 18 Rem ot e MG M T 223 Figure 121 SNMP Managemen t Model An SNMP managed network consis ts of two main types of comp onent : ag ents and a man age r . An agent is a management software module that resi des in a managed device (the ZyXEL Device).
P-2302HW/HWL-P1 Series User’s Guide 224 Chapter 18 Remote MGMT 18.3.2 SNMP T rap s The ZyXEL Device will send traps to the SNMP manager when any on e of the following events occurs: 18.3.3 Configuring SNMP T o change your ZyXEL De vice ’ s SNMP settings, c lick Advanced > Remote MGMT > SNMP .
P-2302HW/HWL-P1 Series User’s Guide Chapter 18 Rem ot e MG M T 225 Figure 122 Management > Remo te MGMT > SNMP The following table describes the labels in this screen.
P-2302HW/HWL-P1 Series User’s Guide 226 Chapter 18 Remote MGMT 18.3.4 DNS Screen Use this screen to control DNS access to your ZyXEL Device. T o access this screen, click Management > Remote MGMT > DNS . Figure 123 Management > Remo te MGMT > DNS Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 18 Rem ot e MG M T 227 Figure 124 Management > Remo te MGMT > Security Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide 228 Chapter 18 Remote MGMT.
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 229 C HAPTER 19 UPnP Use this screen to set up UPnP . 19.1 Introducing Universal Plug and Play Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectiv ity between devices.
P-2302HW/HWL-P1 Series User’s Guide 230 Chapter 19 UPnP All UPnP-enabled devices may communicate freely with eac h other without additional configuration. Disable UPnP if this is not your intention. 19.2 UPnP and ZyXEL ZyXEL has achieved UPnP certification from th e Universal Plug and Play Forum UPnP™ Implementers Corp.
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 231 Figure 125 Add/Remove Programs: Wind ows Setup: Communication 3 In the Communications window , sele ct the Universal Plug and Play check box in the Components selection box.
P-2302HW/HWL-P1 Series User’s Guide 232 Chapter 19 UPnP 19.3.1.2 Inst alling UPnP in Windows XP Follow the steps below to install the UPnP in Windows XP . 1 Click St a r t and Control Panel . 2 Double-click Network Connections . 3 In the Network Connections window , click Advan ced in the main menu and select Optional Networking Components … .
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 233 Figure 129 Networking Services 6 Click OK to go back to the W indows Optional Networking Component Wizard window and click Next . 19.3.2 Using UPnP in Windows XP Example This section shows yo u how to use the UPnP feature in W indo ws XP .
P-2302HW/HWL-P1 Series User’s Guide 234 Chapter 19 UPnP Figure 130 Network Connections 3 In the Internet Connection Properties window , click Setti ngs to see the port mappings there were automatically created.
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 235 Figure 131 Internet Connection Properties 4 Y ou may edit or delete the port map pings or click Add to manually add port mappings.
P-2302HW/HWL-P1 Series User’s Guide 236 Chapter 19 UPnP Figure 132 Internet Connection Properties: Adva nced Settings Figure 133 Internet Connection Proper ties: Adva nced Settings: Add 5 When the UP nP-enabled device is disconn ected from your computer , all port mappings will be deleted automatically .
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 237 Figure 134 System T ray Icon 7 Double-click on the icon to display yo ur curr ent Internet co nnection sta tus.
P-2302HW/HWL-P1 Series User’s Guide 238 Chapter 19 UPnP Figure 136 Network Connections 4 An icon with the description for e ach UPnP-enabled device displays unde r Local Network . 5 Right-click on the icon for your ZyXEL Device an d select Invoke . The web configurator login screen displays.
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 239 Figure 137 Network Connections: My Network Places 6 Right-click on the icon for your ZyXEL Device and select Pr operties . A properties window displays with basic info rmation about the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide 240 Chapter 19 UPnP Figure 138 Network Connections: My Networ k Places: Properties: Example 19.4 UPnP General Screen Use this screen to set up UPnP in your ZyXEL Device. T o acces s this screen, click Management > UPnP .
P-2302HW/HWL-P1 Series User’s Guide Chapter 19 UPnP 241 Figure 139 Management > UPnP Each field is described in the following table. Table 102 Management > UPnP LABEL DESCRIPTION Device Name Th is fie ld identifies your device in UPnP applications.
P-2302HW/HWL-P1 Series User’s Guide 242 Chapter 19 UPnP.
P-2302HW/HWL-P1 Series User’s Guide Chapter 20 System 243 C HAPTER 20 System Use this screen to set up general system se ttings, change the syst em mode, change the password, configure the DDNS server settin gs, and set the current date and time. 20.
P-2302HW/HWL-P1 Series User’s Guide 244 Chapter 20 Syst em 1 The ISP tells you the DNS server addresses, usua lly in the form of an information sheet, when you sign up. If your ISP gives you DNS server addresses, enter them in the DNS Server fields in the SYSTEM G eneral screen.
P-2302HW/HWL-P1 Series User’s Guide Chapter 20 System 245 20.1.6 Resetting the T ime The ZyXEL Device resets the time in the following instances: • When the ZyXEL Device starts up. • When you click Apply in the T ime Setting Screen . • 24-hour intervals after starting.
P-2302HW/HWL-P1 Series User’s Guide 246 Chapter 20 Syst em Figure 140 Maintenance > System > General Each field is described in the following table. Table 104 Maintenance > System > Gene ral LABEL DESCRIPTION System Setup System Name Enter your computer's "Computer Na me ".
P-2302HW/HWL-P1 Series User’s Guide Chapter 20 System 247 20.2.2 Dynamic DNS Screen Use this screen to set up the ZyXEL Device as a dynamic DNS client. T o access this screen, click Maintenance > System > Dynamic DNS . Figure 141 Maintenance > System > Dynamic DNS Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide 248 Chapter 20 Syst em 20.2.3 T ime Setting Screen Use this screen to set the date, time, and tim e zone in the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide Chapter 20 System 249 Figure 142 Maintenance > System > T ime Setting Each field is described in the following table. Table 106 Maintenance > System > Time Setting LABEL DESCRIPTION Current T ime and Date This section displays the current da te and time.
P-2302HW/HWL-P1 Series User’s Guide 250 Chapter 20 Syst em Daylight Savings Select this if your locati on uses da ylight savings time. Daylight savings is a period from late spring to early fall when many places set their clocks ah ead of normal local time by one hour to give more daytime light in the evening.
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 251 C HAPTER 21 Logs Use these screens to look at log entries and alerts and to configure the ZyXEL Device’ s log and alert settings. 21.1 Logs Overview For a list of log messages, see Section 21.
P-2302HW/HWL-P1 Series User’s Guide 252 Chapter 21 Logs 21.2 Logs Screens 21.2.1 V iew Log Screen Use this screen to look at log entries and alerts. Alerts are written in red.
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 253 21.2.2 Log Settings Screen Use this screen to configure where the ZyXEL Device sends logs and al erts, the schedule for sending logs, and which logs and alerts are sent or recorded. T o access this screen, click Maintenance > Logs > Log Settings .
P-2302HW/HWL-P1 Series User’s Guide 254 Chapter 21 Logs Figure 144 Maintenance > Logs > Log Settings Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 255 Send Alerts to Enter the e-mail address to which alerts are sent by e-mai l. Leave this field blank if you do not want to send alerts by e-mail. Log Schedule Select the frequency with wh ich th e ZyXEL Device should send log messages by e-mail.
P-2302HW/HWL-P1 Series User’s Guide 256 Chapter 21 Logs 21.3 Log Message Descriptions The following tables provid e descri ptions of example log messages. Table 110 System Error Logs LOG MESSAGE DESCRIPTION WAN connection is down. The W AN connection is down.
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 257 Too large ICMP packet has been dropped The device dropped an ICMP packet that was too large. Configuration Change: PC = 0x%x, Task ID = 0x%x The device is saving configuration changes.
P-2302HW/HWL-P1 Series User’s Guide 258 Chapter 21 Logs F or type and code details, see T able 121 on page 261 . Firewall session time out, sent TCP RST The router sent a TCP reset packet when a dynamic firewall session timed out.
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 259 Unsupported/out-of-order ICMP: ICMP The firewall do es not support this kind of IC MP packets or the ICMP packets are out of order . Router reply ICMP packet: ICMP The router sent an ICMP reply packet to the sender .
P-2302HW/HWL-P1 Series User’s Guide 260 Chapter 21 Logs For type and code details, see T able 121 on page 261 . Cannot get the IP address of content filtering external database via DNS query. The ZyXEL Device cannot get the IP address of the external content filtering via DNS query .
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 261 traceroute ICMP (type:%d, code:%d) The firewall detected an IC MP traceroute attack. ports scan UDP The firewall detected a UDP port scan att ack.
P-2302HW/HWL-P1 Series User’s Guide 262 Chapter 21 Logs 0 Net unreachable 1 Host unreachable 2 Protocol unreachable 3 Port unreachable 4 A packet that needed fragmenta tion was dropped because it wa.
P-2302HW/HWL-P1 Series User’s Guide Chapter 21 Logs 263 Table 122 SIP Logs LOG MESSAGE DESCRIPTION SIP Registration Success by SIP:SIP Phone Number The listed SIP account was successfully registered with a SIP register server .
P-2302HW/HWL-P1 Series User’s Guide 264 Chapter 21 Logs.
P-2302HW/HWL-P1 Series User’s Guide Chapter 22 Tools 265 C HAPTER 22 To o l s Use these screens to upload new firmware, back up and restore the configuration, and restart the ZyXEL Device. 22.1 T ools Overview 22.1.1 ZyXEL Firmware Find firmware at www .
P-2302HW/HWL-P1 Series User’s Guide 266 Chapter 22 Tools Figure 145 Maintenance > T ools > Firmware Each field is described in the following table.
P-2302HW/HWL-P1 Series User’s Guide Chapter 22 Tools 267 Figure 146 Firmware Uplo ad In Process The process usually takes about two minutes. Th e device automatically restarts in this time. This causes a temporary network disconnect. In some operating syst ems, you may see the following icon on your desktop .
P-2302HW/HWL-P1 Series User’s Guide 268 Chapter 22 Tools Figure 148 Maintenance > T ools > Configuration Each field is described in the following table. 22.2.4 Restore Co nfiguration Screens Note: Do not turn of f the device while conf iguration file upload is in progress.
P-2302HW/HWL-P1 Series User’s Guide Chapter 22 Tools 269 When the ZyXEL Device has finished restoring the selected configuration file, the fol lowing screen appears. Figure 149 Configuration Upload Successfu l The device now automatically restarts. This cau ses a temporary network disc onnect.
P-2302HW/HWL-P1 Series User’s Guide 270 Chapter 22 Tools Figure 151 Maintenance > T ools > Restart This does not af fect the ZyXEL Devi ce’ s configuration. When you click Restart , the following screen appears. Figure 152 Maintenance > T ools > Restart > In Progress W ait one mi nute for the device to finish restarting.
P-2302HW/HWL-P1 Series User’s Guide Chapter 23 Troubleshooting 271 C HAPTER 23 T roubleshooting This chapter covers potential proble ms and the corresponding remedies.
P-2302HW/HWL-P1 Series User’s Guide 272 Chapter 23 Troublesh ooting 23.3 Problems with the W AN 23.4 Problems Accessi ng the ZyXEL Device Table 129 Troubleshooting the WAN PROBLEM CORRECTIVE ACTION The WA N light is off. Check the Ethernet cable and connections between the ZyXEL Device WA N port and DSL modem or switch that it is connected to.
P-2302HW/HWL-P1 Series User’s Guide Chapter 23 Troubleshooting 273 23.4.1 Pop-up Windows, Ja vaScript s and Java Permissions In order to use the web configurator yo u need to allow: • W eb browser pop-up windows from your device. • JavaScripts (enabled by default).
P-2302HW/HWL-P1 Series User’s Guide 274 Chapter 23 Troublesh ooting 23.4.1.1.1 Disable pop-up Blockers 1 In Internet Explorer , select To o l s , Pop-up Blocker and then select T urn Off Pop-up Blocker . Figure 153 Pop-up Blocker Y ou can also check if pop-u p blocking is disabled in the Pop-up Blocker section in the Privacy tab.
P-2302HW/HWL-P1 Series User’s Guide Chapter 23 Troubleshooting 275 1 In Internet Explorer , select To o l s , Internet Options and then the Privacy tab.
P-2302HW/HWL-P1 Series User’s Guide 276 Chapter 23 Troublesh ooting Figure 156 Pop-up Blocker Settings 5 Click Close to return to the Privacy screen. 6 Click Apply to save this setting. 23.4.1.2 JavaScript s If pages of the web configura tor do not display properly in Intern et Explorer , check that JavaScripts are allowed.
P-2302HW/HWL-P1 Series User’s Guide Chapter 23 Troubleshooting 277 Figure 157 Internet Options 2 Click the Custom Level... button. 3 Scroll down to Scripting . 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is sele cted (the default).
P-2302HW/HWL-P1 Series User’s Guide 278 Chapter 23 Troublesh ooting 23.4.1.3 Java Permissions 1 From Internet Explorer , click To o l s , In ternet Options and then the Security tab. 2 Click the Custom Level... button. 3 Scroll down to Microsoft VM .
P-2302HW/HWL-P1 Series User’s Guide Chapter 23 Troubleshooting 279 Figure 160 Java (Sun) 23.5 T elephone Problems Table 131 Troubleshooting Telephone PROBLEM CORRECTIVE ACTION The telephone port won’t work or the telephone lacks a dial to ne. Check the telephone con nections and telephone wire.
P-2302HW/HWL-P1 Series User’s Guide 280 Chapter 23 Troublesh ooting 23.6 Problems With Multiple SIP Account s Y ou can set up two SIP accounts on your Zy X EL Device and your ZyXEL Device is equipp ed with two phone ports.
P-2302HW/HWL-P1 Series User’s Guide Chapter 23 Troubleshooting 281 23.6.2 Incoming Calls The following example shows the default behavior of your ZyXE L Device for incoming calls when two SIP accounts are configured and yo u are using two phones.
P-2302HW/HWL-P1 Series User’s Guide 282 Chapter 23 Troublesh ooting.
P-2302HW/HWL-P1 Series User’s Guide Appendix A Product Specifications 283 A PPENDIX A Product S pecifications See also the introduction chapter for a general overview of t he key features. S pecification T ables Table 132 Device Specifications Default IP Address 192.
P-2302HW/HWL-P1 Series User’s Guide 284 Appendix A Product Specifications Table 133 Firmware Fe atures FEATURE DESCRIPTION Device Management Use the web configurator to easi ly co nfigure the rich range of features on the ZyXEL Device.
P-2302HW/HWL-P1 Series User’s Guide Appendix A Product Specifications 285 Table 134 Feature Specifica tions V oice Functions SIP (RFC 3261) version 2 SDP (RFC 2327) RTP (RFC 1889) RTCP (RFC 1890) G .
P-2302HW/HWL-P1 Series User’s Guide 286 Appendix A Product Specifications Power Adaptor Specifications NA T/SUA Port Forwarding 2048 NA T sessions Multimedia application.
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 287 A PPENDIX B Setting up Y our Computer ’ s IP Address All computers must have a 10M or 100M Et hernet adapter card and TCP/IP installed.
P-2302HW/HWL-P1 Series User’s Guide 288 Appendix B Setting up Your Computer’s IP Address Figure 165 WIndows 95/98 /Me: Network: Co nfiguration Inst alling Component s The Network window Configuration tab displays a list of installed components. Y ou need a network adapter , the TCP/IP protocol and Client for Microso ft Networks.
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 289 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click OK . 5 Restart your computer so the changes you made take ef fect.
P-2302HW/HWL-P1 Series User’s Guide 290 Appendix B Setting up Your Computer’s IP Address Figure 167 Windows 95/98/Me : TCP/IP Pr operties: DNS Configuration 4 Click the Gateway tab. • If you do not know you r gateway’ s IP address, remove previously installed gateways.
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 291 Figure 168 Windows XP: S tart Menu 2 In the Control Panel , double-click Network Connections ( Network and Dial-up Connections in W indows 2000/NT). Figure 169 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Pr operties .
P-2302HW/HWL-P1 Series User’s Guide 292 Appendix B Setting up Your Computer’s IP Address Figure 170 Windows XP: Control Panel: Network Connections: Pro per ties 4 Select Internet Protocol (TCP/IP) (under the Genera l tab in W in XP) and then click Properties .
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 293 • If you have a static IP address click Use the following IP Address and fill in the IP addr ess , Subnet mask , and Default gateway fields. • Click Advanced .
P-2302HW/HWL-P1 Series User’s Guide 294 Appendix B Setting up Your Computer’s IP Address Figure 173 Windows XP: Advanced TCP/IP Properties 7 In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP): • Click Obtain D NS server address automatically if you do not kno w your DNS server IP addre ss(es).
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 295 Figure 174 Windows XP: Internet Protocol (TCP/IP) Propert ies 8 Click OK to close the Internet Protocol (TCP/IP) Pr operties window . 9 Click Close ( OK in W indows 2000/NT) to close the Local Area Connection Pr operties window .
P-2302HW/HWL-P1 Series User’s Guide 296 Appendix B Setting up Your Computer’s IP Address Figure 175 Macintosh O S X: Apple M enu 2 Click Network i n the icon bar . • Select Automatic from the Location list. • Select Built-in E thernet from the Show list.
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 297 6 Restart your computer (if prompted). V erifying Settings Check your TCP/IP properties in the Network window . Linux This section shows you how to configure your computer’ s TCP/IP settings in Red Hat Linux 9.
P-2302HW/HWL-P1 Series User’s Guide 298 Appendix B Setting up Your Computer’s IP Address Figure 178 Red Hat 9.0: KDE: Ethern et Device: General • If you have a dyna mic IP address, click Automatically obtain IP address settings with and select dhcp from the drop down list.
P-2302HW/HWL-P1 Series User’s Guide Appendix B Setting up Your Computer’s IP Address 299 6 Click the Activate button to apply the changes. Th e following screen displays.
P-2302HW/HWL-P1 Series User’s Guide 300 Appendix B Setting up Your Computer’s IP Address Figure 182 Red Hat 9.0: S tatic IP Addres s Setting in ifconfig-eth0 2 If you know your DNS server IP address(es) , enter the DNS server information in the resolv.
P-2302HW/HWL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting 301 A PPENDIX C IP Addresses and Subnetting This appendix introduces IP addresses, IP address classes and subnet masks. Y ou use subne t masks to subdivid e a network in to smaller logical networks.
P-2302HW/HWL-P1 Series User’s Guide 302 Appendix C IP Addr esses and Subnetting The following table shows the network number and host ID arrangement for classes A, B and C. An IP address with host IDs of all zeros is the IP address of the n etwork (192.
P-2302HW/HWL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting 303 Subnet Masks A subnet mask is used to dete rmine which bits are part of th e network number , and which bits are part of the host ID (using a logical AND operation). A subnet mask has 32 bits.
P-2302HW/HWL-P1 Series User’s Guide 304 Appendix C IP Addr esses and Subnetting The first mask shown is the class “C” natural m ask. Normally if no mask is specified it is understood that the natura l mask is being used. Example: T wo Subnet s As an example, you have a class “C” address 1 92.
P-2302HW/HWL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting 305 Host IDs of all zeros represent the subnet itsel f and host IDs of all ones are the broadcast address for that subnet, so the actual number of hosts available on eac h subnet in the example above is 2 7 – 2 or 126 h osts for each subnet.
P-2302HW/HWL-P1 Series User’s Guide 306 Appendix C IP Addr esses and Subnetting Example Eight Subnet s Similarly use a 27-bit mask to create eight subnets (000, 001, 010 , 01 1, 10 0, 101, 1 10 and 111 ) . Subnet Address: 192.1 68.1.0 Lowest Host ID: 192 .
P-2302HW/HWL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting 307 The following table shows class C IP ad dress last octet values for each subnet. The following table is a summary for class “C” subnet planning. Subnetting With Class A and Class B Networks.
P-2302HW/HWL-P1 Series User’s Guide 308 Appendix C IP Addr esses and Subnetting The following table is a summary for class “B” subnet planning. Table 149 Class B Subnet Planning NO. “BORROWED” HOST BIT S SUBNET MASK NO. SUBNET S NO. HOSTS PER SUBNET 1 255.
P-2302HW/HWL-P1 Series User’s Guide Appendix D SIP Passt hrough 309 A PPENDIX D SIP Passthrough Enabling/Disabling the SIP ALG Y ou can turn of f the ZyXEL Device SIP ALG to avoid retranslating the IP address of an existing SIP device that is usin g STUN.
P-2302HW/HWL-P1 Series User’s Guide 310 Appendix D SIP Passthrough.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 311 A PPENDIX E Internal SPTGEN This appendix introduces Internal SP TGEN. A ll menus shown in this appendix are example menus meant to show SP TGEN usage. Actual menus for your product may differ .
P-2302HW/HWL-P1 Series User’s Guide 312 Appendix E Inter nal SPTGEN Internal SPTGEN File Modification - Import ant Point s to Remember Each paramete r you enter must be pr ecede d by one “=”sign and one space. Some parameters are dependent on othe rs.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 313 Figure 189 Internal SPTGEN FTP Download Example Note: Y ou can rename your “ rom-t ” file when you save it to your computer but it must be named “ rom-t ” when you uplo ad it to your ZyXEL De vice.
P-2302HW/HWL-P1 Series User’s Guide 314 Appendix E Inter nal SPTGEN Example Internal SPTGEN Menus This section provides example Internal SP TGEN menus.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 315 30100012 = Output protocol filters Set 4 = 256 30100013 = Output device filters Set 1 = 256 30100014 = Output device filters Set 2 = 256 30100015 = Output device filters Set 3 = 256 30100016 = Output device filters Set 4 = 256 / Menu 3.
P-2302HW/HWL-P1 Series User’s Guide 316 Appendix E Inter nal SPTGEN 30201005 = Version <0(Rip-1) | 1(Rip-2B) |2(Rip-2M)> = 0 30201006 = IP Alias #1 Incoming protocol f ilters Set 1 = 256 30201.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 317 FIN FN PVA INPUT 30500001 = ESSID Wireless 30500002 = Hide ESSID <0(No) | 1(Yes)> = 0 30500003 = Channel ID <1|2|3|4|5|6|7 |8|9|10|11|12| 13> = 1 30500004 = RTS Threshold <0 ~ 2432> = 2432 30500005 = FRAG.
P-2302HW/HWL-P1 Series User’s Guide 318 Appendix E Inter nal SPTGEN Table 153 Menu 4 Internet Access Setup / Menu 4 Internet Access Setup FIN FN PVA INPUT 40000000 = Configured <0(No) | 1(Yes)>.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 319 40000027 = ATM QoS Type <0(CBR) | (1 (UBR)> = 1 40000028 = Peak Cell Rate (PCR) = 0 40000029 = Sustain Cell Rate (SCR) = 0 40.
P-2302HW/HWL-P1 Series User’s Guide 320 Appendix E Inter nal SPTGEN Table 155 Menu 15 SUA Server Setup / Menu 15 SUA Server Setup FIN FN PVA INPUT 150000001 = SUA Server IP address for default port = 0.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 321 150000031 = SUA Server #7 Local IP address = 0.0.0.0 150000032 = SUA Server #8 Active <0(No) | 1(Yes)> = 0 150000033 = SUA Se.
P-2302HW/HWL-P1 Series User’s Guide 322 Appendix E Inter nal SPTGEN 210101002 = IP Filter Set 1,Rule 1 Active < 0(No)|1(Yes)> = 1 210101003 = IP Filter Set 1,Rule 1 Protocol = 6 210101004 = IP Filter Set 1,Rule 1 Dest IP address = 0.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 323 210102013 = IP Filter Set 1,Rule 2 Act Match <1(check next)|2(forward)| 3(drop)> = 3 210102014 = IP Filter Set 1,Rule 2 Act Not Match <1(check next)|2(forward)| 3(drop)> = 1 Table 156 Menu 21.
P-2302HW/HWL-P1 Series User’s Guide 324 Appendix E Inter nal SPTGEN 210202001 = IP Filter Set 2, Rule 2 Type <0(none)|2(TCP/IP)> = 2 210202002 = IP Filter Set 2, Rule 2 Active <0(No)|1(Yes)> = 1 210202003 = IP Filter Set 2, Rule 2 Protocol = 6 210202004 = IP Filter Set 2, Rule 2 Dest IP address = 0.
P-2302HW/HWL-P1 Series User’s Guide Appendix E Internal SPTGEN 325 230200005 = Authentication Server Shared Secret = 111111111111 111 111111111111 1111 230200006 = Accounting Server Configured <0(No) | 1(Yes)> = 1 230200007 = Accounting Server Active <0(No) | 1(Yes)> = 1 230200008 = Accounting Server IP Address = 192.
P-2302HW/HWL-P1 Series User’s Guide 326 Appendix E Inter nal SPTGEN Command Examples The following are example Internal SP TGEN screens associated with the ZyXEL Device’ s command interpreter commands. 241100002 = TELNET Server Access <0(all)|1(none)|2(L an)|3(Wan)> = 0 241100003 = TELNET Server Secured IP address = 0.
P-2302HW/HWL-P1 Series User’s Guide Appendix F Service s 327 A PPENDIX F Services The following table l ists some commonly-used se rvices and their associated protocols and port numbers. • Name : This is a short, descrip tive name for the service.
P-2302HW/HWL-P1 Series User’s Guide 328 Appendix F Services HTTP TCP 80 Hyper T ext T ransfer Protocol - a client/ server protocol for the world wide web. HTTPS TCP 443 HTTPS is a secured http session often used in e-commerce. ICMP User-Defined 1 Internet Control Message Protocol is often used for diagnostic purposes.
P-2302HW/HWL-P1 Series User’s Guide Appendix F Service s 329 RCMD TCP 512 Remote Command Se rvice. REAL_AUDIO TCP 7070 A streaming audio service that enab les real time sound over the we b. REXEC TCP 514 Remote Execution Daemon. RLOGIN TCP 513 Remote Login.
P-2302HW/HWL-P1 Series User’s Guide 330 Appendix F Services.
P-2302HW/HWL-P1 Series User’s Guide Index 331 Index A access point (AP) 89 Address Resolution Protocol (ARP) 121 alert settings 251 ALG 143 enabling SIP/FTP/H.
P-2302HW/HWL-P1 Series User’s Guide 332 Index connection wizard 51 exceptions 53 contact information 9 content filter 197 , 199 configuration 198 schedule 199 conventions 35 copyright 3 CoS (Class o.
P-2302HW/HWL-P1 Series User’s Guide Index 333 FTP 219 , 244 remote management 221 FTP restrictions 219 FXO (Foreign Exchange Office) 283 FXS (Foreign Exchange S tation) 283 G G .168 15 5 , 161 G .168 Echo Can c ellation 285 G. 7 1 1 150 G .71 1, waveform codec 144 , 285 G .
P-2302HW/HWL-P1 Series User’s Guide 334 Index management IP address 283 maximize bandwidth usage 207 , 208 , 212 model types 37 monitoring bandwidth usage 216 multicasting 11 3 , 11 9 multimedia, an.
P-2302HW/HWL-P1 Series User’s Guide Index 335 R Real time T ransport Protocol (RTP) 142 redirect server , SIP 142 region selection, phone 163 registration product 8 related documentation 35 relay to.
P-2302HW/HWL-P1 Series User’s Guide 336 Index spoofing MAC address 106 SSID 90 , 92 and OTIST 92 broadcast 90 hiding 90 SSID (Service Set IDentity) 89 stateful inspection, and firewall 189 static IP.
P-2302HW/HWL-P1 Series User’s Guide Index 337 setup wizard 52 SIP settings 146 troubleshooting 279 V oIP features 37 V oIP lin ks 173 V oIP trunking 38 , 173 call rules 175 example 181 incoming auth.
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications P-2302HW-P1 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications P-2302HW-P1 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications P-2302HW-P1 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications P-2302HW-P1 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications P-2302HW-P1 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications P-2302HW-P1 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications P-2302HW-P1 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications P-2302HW-P1 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications P-2302HW-P1 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
