Benutzeranleitung / Produktwartung 650H-E Series des Produzenten ZyXEL Communications
Zur Seite of 28
Pr estige 650H-E Series ADSL Router Compact Guide Version 3.40 August 2003.
Prestige 650H-E 2 T able of Content s 1 Introducing the Prestige ..................................................................................................... ........... 3 2 Hardware ...........................................................
Prestige 650H-E 3 1 Introducing the Prestige The Prestige 650H-E ADSL router is the ideal all-in-o ne device for small networks con necting to the Internet via ADSL. Key feat ures of the Prestige include NAT , Firewall and UPnP. See your User’s Guide for more details on all Prestige features.
Prestige 650H-E 4 2 Hardware 2.1 Rear Panel Connections Figure 1 Prestige Hardware Connecti ons Table 1 Prestige Rear Panel Descripti on LA BEL DESCRIPTION 1. DSL Connect to a telephone jack using the included phone wire. 2. LAN 1..4 Connect to a computer/external hub using an Ethernet cable.
Prestige 650H-E 5 2.2 The Front Panel LEDs Figure 2 Prestige Front Panel Refer to the following t able for m ore detailed LED descripti ons. Table 2 Front Panel LED Description LED COLOR STATUS DESCRIPTION On The Prestige is receiving power and functioning properly.
Prestige 650H-E 6 3 Setting Up Y our Computer ’ s IP Address Skip this section if your computer is already set up to accept a dynamic IP address. This is the default for most ne w computers. The Prestige is already set up to assign y our computer an IP ad dress.
Prestige 650H-E 7 6. Click Advanced . Remove any previously installed gateways in the IP Settin gs tab and click OK to go back to the Internet Protocol TCP/IP Properties screen. 7. Click OK to close the Internet Protocol (T CP/IP) Properties window. 8.
Prestige 650H-E 8 3. Press ENTER and the following screen displays. Your computer can now com municat e with the Prestige using the LAN port. 4 Configuring Y our Prestige This Compact Guide shows y ou how to use the web configurator only .
Prestige 650H-E 9 Figure 4 Web Configurator: Pass word Screen Step 3. You shoul d now see t he web confi gurator Si te Map screen. Click Wizard Setup to begin a series of screens to configure your Prestige for the firs t time. Click a link und er Advanced Setup to confi gure advanced Prestige features.
Prestige 650H-E 10 The Prestige automatically logs you out if it is left idle for five minutes; press ENTER to log back in again. 4.2 Common Screen Command Buttons The following table shows commo n command buttons found on many web configur ator screens.
Prestige 650H-E 11 Figure 7 Internet Connection with PPPoE If your ISP provides the name of your PPPoE service provider, enter it in the Service Name field.
Prestige 650H-E 12 Figure 9 Internet Connection with ENET ENCAP In the ENET ENCAP Gateway field, enter the gateway IP address given by your ISP. Refer to Figure 7 for other field de scriptions . Figure 10 Internet Connection with PPPoA Refer to Figure 7 for field descriptions.
Prestige 650H-E 13 Step 3. Verify the sett ings in the sc reen shown next. To cha nge the LAN i nformation on the Prestige, click Change LAN Co nfigurations . Ot herwise click Save Settings to save th e configuration and sk ip to step 5. Figure 11 Wizard Screen 3 Step 1.
Prestige 650H-E 14 Figure 12 Wizard: LAN Configuration Enter the IP address of your Prestige in dotted decimal notation in the LAN IP Address field. For example, 192.168.1.1 (factory default). If you change the Prestige’ s LAN IP addr ess, you must use the new IP address if you want to access the web configurator again.
Prestige 650H-E 15 4.4 T est Y our Internet Connection Launch your web browser and navigate to www. zyxel.com . Internet access is just the beginning. Refer to the User’s Gui de for m ore detailed information on the complete rang e of Prestige features.
Prestige 650H-E 16 5.2 Configuring SUA Server An SUA server set is a list of inside (behind NAT on the LAN) servers, for example, web or FTP, that you can ma ke visible to t he outside wor ld even thou gh SUA makes y our whole i nside network appear as a single computer to the ou tside world.
Prestige 650H-E 17 If you do not assign an IP Address, then all p acket s received for ports not specified in this screen will be discarded. From the main screen click Advanced Setup and then NAT to open t he main NAT screen. Select SUA Only and click Edit Details .
Prestige 650H-E 18 5.3 Configuring Address Mapping Some applications do not supp ort NAT mapping usin g TCP or UDP port ad dress translation. In th is case it is better to use Many -To-Many No Ov erloa d mapping as por t numbers do not change for Many-To-Many No Overload (and One -to-One ) N AT mapping types.
Prestige 650H-E 19 Figure 17 NAT: Address Mapping The following table describes the labels in this screen. Table 5 NAT: Address Mapping LABEL DESCRIPTION Type Choose the port mapping type from the drop -down list box. Refer to the mapping types as discussed previously.
Prestige 650H-E 20 When activated, the firewall allows all traffic to the Internet that origin ates from the LAN, and blocks all traffic to the LAN that originates fr om the Internet.
Prestige 650H-E 21 Figure 19 Enabling the Fire wall 5.6 Procedure for Configuring Firewall Rules From the main screen, click Advanced Setup , Firewall and then Rule Summary (for either local network to Internet rules or Internet to local netwo rk rules) to open the Summary screen.
Prestige 650H-E 22 Figure 20 Rule Summary The following table describes the labels in this screen. Table 6 Rule Summary LA BEL DESCRIPTION The default action for packets not matching following rules Should packets that do not match the following rules be blocked or forwarded? Make your choice from the drop down list box.
Prestige 650H-E 23 Table 6 Rule Summary LA BEL DESCRIPTION Destination IP This drop-down list box displays the destination addresses or ranges of addresses to which this firewall rule applies. Please note that a blank source or destination address is equivalent to An y .
Prestige 650H-E 24 Figure 21 Creating/Editing A Fire w all Rule The following table describes the labels in this screen. Table 7 Creating/Editing A Fire w all Rule LA BEL DESCRIPTION Source Address Click SrcAdd to add a new address, SrcEdit to edit an existing one or SrcDelete to delete one.
Prestige 650H-E 25 Table 7 Creating/Editing A Fire w all Rule LA BEL DESCRIPTION Services Available/ Selected Services Highlight a service from the Available Ser vices box on the left, then click >> to add it to the Selected Services box on the right.
Prestige 650H-E 26 Table 8 Adding/Editing Source and Destination Addresses LA BEL DESCRIPTION Address Type Do you want your rule to apply to packets with a particular (single) IP address, a range of IP addresses (e.
Prestige 650H-E 27 The following table describes the labels in this screen. Table 9 UPnP FIELD DESCRIPTION Enable the Universal Plug and Play (UPnP) Service Select this checkbox to activate UPnP .
Prestige 650H-E 28 6 T roubleshooting Table 10 Troubleshooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on when you turn on the Prestige. Make sure that you have the correct power adapter connected to th e Prestige and plugged in to an appropriate power s ource.
Ein wichtiger Punkt beim Kauf des Geräts ZyXEL Communications 650H-E Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ZyXEL Communications 650H-E Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ZyXEL Communications 650H-E Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ZyXEL Communications 650H-E Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ZyXEL Communications 650H-E Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ZyXEL Communications 650H-E Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ZyXEL Communications 650H-E Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ZyXEL Communications 650H-E Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ZyXEL Communications 650H-E Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
