Benutzeranleitung / Produktwartung WLAN 11b Access Point des Produzenten X-Micro Tech.
Zur Seite of 32
X-Micr o WLAN 1 1b Access Point User ’ s Manual.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 T ermi nology ANSI American National S tandards Institute AP Access Point CCK C omplementary C ode K eying CSMA/CA Carrier Sense Multipl.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 T able of Contents TERMINOLOGY ............................................................................................................................. I 1 INTRODUCTION .............
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4.6 W HA T IS ESSID? .............................................................................................................. 20 4.7 W HA T ARE POTENTIAL F ACTOR S THA T MA Y CAUSES INTERFERENCE ? .
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 1 Introduction X-Micro WLAN 1 1b Access Point is a portal that can act as the connection point between the Ethernet CSMA/CD protocol and the wireless CSMA/CA pr otocol. The Access Point can be easily integrated into your existing wireless network.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Dimension 120 * 75 * 34 mm Operating T emperature 0 – 50 o C ambient tem perature S torage T emperature -20 - 70 o C ambient temperatu re Humidity 5 to 90 % maximum (non-condensing) 1.3 Product Features ¾ Complies with IEEE 802.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 1.5 Rear Panel Description Antenna Power Reset LAN Figure 2 – X-Micro WLAN 1 1b Access Point Rear Panel Interfaces Description 1. Reset Push continually the reset button 5 seconds to reset the configuration parameters to fact ory defa ul t s.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 2 Installation 2.1 Hardware Installation S tep One: Place X-Micro WLAN 1 1b Access Po int to the best optimum transmission location.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 3 Software configuration There are web based management and configurat ion functions allowing you to have the jobs done easily . X-Micro W LAN 1 1b Access Point is delivered with the following factory default parameters.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Connections icon. Move mouse and double-click the Local Area Connection icon. The Local Area Connection window will appear . Click Pro perties button in the Local Area Connection window .
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 3.2 Connect to X-Micro WLAN 1 1b Access Point Open a W EB browser , i.e. Microsoft Internet Explore, then enter 192.168.1.254 on the URL to connect X-Micro W LAN 1 1b Access Point. 3.3 Management and configuration on X-Micro WLAN 1 1b Access Point 3.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 SSID It shows the SSID of X-Micro W LAN 1 1b Access Point. The SSID is the unique name of X-Micro W LAN 1 1b Access Point and shared among its service area, so all devices attempts to join the same wireless network can identify it.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Screenshot – W ireless Basic Settings Item D escription Alias Name It is the alias name of X-Micro W LAN 1 1b Access Point. The alias name can be 32 characters long. Disable W i eless LAN Interface r T i ck on to disable the wireless LAN data transm ission.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 knowledge about wireless LAN. These se ttings should not be changed unless you know what effect the changes will h ave on your Access Point.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4.13 W hat is Preamble T ype? Broadcast SSID Click to enable or disable the SSID broadcast function. Refer to 4.14 W hat is SSID Broadcast? Apply Changes Click the Apply Changes button to complete the new configuration setting.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 bits) and secret key (40-bit or 104-bit). Key Format Select the WEP shared secret key format from pull-down menu. The format can be chose between plant text (ASCII) and hexadecimal (HEX) code.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Screenshot – W i reless Access Control Item D escription Enable WEP Security Click the check box to enable wireless access control. This is a security control function; only those clients registered in the access c ontrol list can link to X-Micro WLAN 1 1b Access Point.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 previous configuration setting. 3.3.6 LAN Interface Setup This page is used to configure the para meters for local area network that connects to the LAN port of your Access Point. Here you may change the setting f or IP address, subnet mask, DHCP , etc.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 cloned. Clone MAC address is de signed for your special application that request the clie nts to register to a server machine with one identified MAC address.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 W ireless LAN Received Packets It shows the statistic count of received packets on the wireless LAN interface. Ethernet LAN Sent Packets It shows the statistic coun t of sent packets on the Ethernet LAN interface.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 previous configuration setting. 3.3.9 Save /Reload Settings This page allows you save curr ent settings to a file or reload the settings from the file that was saved previously . Besides, you could reset the current configuration to factory default.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Screenshot – Password Setup Item D escription User Name Fill in the user name for web m anagement login control.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4 Frequently Asked Questions (F AQ) 4.1 What and how to find my PC’ s IP and MAC address? IP address is the identifier for a com puter or device on a TCP/IP network. Networks using the T CP/IP protocol route messages ba sed on the IP address of the destination.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 to the wired LAN for services (file servers, p rinters, Internet links) they will operate in infrastructure mode. Example 1: wireless Infrastructure Mode Ad hoc mode (also called peer -to-peer mode or an Independent Basic Service Set, or IBSS) is simply a set of 802.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 4.7 What are potential factors that may causes interference? Factors of interference: ¾ Obstacles: walls, ceilings, furniture … etc. ¾ Building Materials: metal door , aluminum studs.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 fragments each of size equal to fragment threshold. By tuning the fragment threshold value, we can get varying fragment sizes. Th e determination of an ef ficient fragment threshold is an important issue in this sche m e.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 stations to establish and maintain co mmunications in an orderly fashion. Beacon Interval represents the amount of time between beaco n transmissions.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 5 Configuration Examples 5.1 Example One – DHCP on the LAN Sales division of Company ABC likes to es tablish a W LAN networ k to support mobile communication on sales’ Notebook PCs.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Configure the LAN interface: Open LAN Interface Setup page and enable the DHCP Client function. Press button to confirm the configuration setting. Configure the WLAN interface: Open WLAN Interface Setup page, enter the SSID “ SDWLAN ”, Channel Number “ 1 ”.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 5.2 Example T wo – Fixed IP on the LAN Company ABC likes to establish a WLAN network to support mobile communication on all employees’ Notebook PCs. MIS engin eer collects information and plans the WLAN Access Point implementation by the following configuration.
USER’S MANUAL OF X-Micro WLAN 1 1b ACCESS POINT V ersion: 2.0 Configure the LAN interface: Open LAN Interface Setup page, enter the IP Address “ 192.168.1.254 ”, Subnet Mask “ 255.255.255.0 ”, Default Gateway “ 192.168.1.10 ”. Press button to confirm the configuration setting.
www .x-micro.com.
Ein wichtiger Punkt beim Kauf des Geräts X-Micro Tech. WLAN 11b Access Point (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie X-Micro Tech. WLAN 11b Access Point noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für X-Micro Tech. WLAN 11b Access Point - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von X-Micro Tech. WLAN 11b Access Point reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über X-Micro Tech. WLAN 11b Access Point erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon X-Micro Tech. WLAN 11b Access Point besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von X-Micro Tech. WLAN 11b Access Point verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit X-Micro Tech. WLAN 11b Access Point. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei X-Micro Tech. WLAN 11b Access Point gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
