Benutzeranleitung / Produktwartung Adora TL WP des Produzenten V-Zug
Zur Seite of 56
V-ZUG Ltd Tumble dryer Adora TL WP Operating instructions.
2 Thank you for choosing to buy one of our products. Your appliance is made to high standards and i s easy to use. Neverth eless, please take th e time to read these operating instructions in or der to familiarize yourself with the appliance and get the best use out of it.
3 Contents 1 Safety precautions 5 1.1 Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 7 Trouble-sho oting 40 7.1 What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 8 Drying tips 47 8.1 Fabric care symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 1 Safety precautions In accordance with the requirements of IEC 60335-1: • This appliance is not intended for use by persons (including chi ldren) with reduced physical, sensory or mental capabili.
1 Safety precautions 6 1.2 Before using for the first time • The appliance must be installed and co nnected to the el ectricity supply in accordance with the s eparate installa tion instructions. The necessary work should be carried out by a qualified fitter or electrician.
1 Safety precautions 7 Do not use the appliance to dry the following •U n w a s h e d w a s h i n g . • Textiles that have been cleaned, treated or soaked with flammabl e chemicals, detergents o r solvents (benzine , alcohol, stain r emover, oil, paint, wax, etc).
1 Safety precautions 8 1.5 Note on use • Do not use the appliance if vi sibly damaged or if the inlet pipes a re damaged. Con tact Customer S ervices. • If the appliance is not op erating properly, disconne ct it from the electr icity supply immediate ly.
1 Safety precautions 9 1.6 Maintenance • Disconnect the appliance from the ma ins before carrying out maintenance work. • The door filter must be cleaned each time after a dryi ng programme. • Do not spray the outside or the inside of the appli a nce with water.
10 2 Your appliance 2.1 Appliance description The appliance operate s with a closed air circuit. With the help of the heat pump, the moisture is e xtracted from the air which is then heated up again. Recovering heat in this way sharpl y reduces energy consumption.
2 Your appliance 11 2.2 Construction 1 Operating and display elem ents (pivoting operating p anel) 2 Appliance door 3 Door filter 4 Cover 5 Cassette in base 6 Air grille 7 Identification plate/ serial.
2 Your appliance 12 2.3 Operating and display elements Automatic programmes Additional programme Additional functions Extra dry Normal dry Iron dry Damp Woollens Step button Fabric type Timed drying Easy care Delayed start End of programme MIN.
2 Your appliance 13 Display elemen ts • D isplay (digi tal display) for: Programme dur ation Remaining programme durati on Delayed start Hints and trouble-shooting • Level of dryness display • C.
2 Your appliance 14 2.4 Using for the first time When the appliance i s connected to the power suppl y for the first time , it is possible to select a function test. The pu rpose of the function test is to check the installation and it la sts about 3 minut es.
15 3 Programme overview 3.1 Programme sequence for automatic programmes The drying programme has 3 phases: Drying The washing is tum ble dried unti l it reaches the set l evel of dryness. Th e drying programme is monitored by a moisture sensor. As so on as the required level of dryness is reached, the «Cooling down/airi ng» phase starts.
3 Program me overvie w 16 3.2 Automatic programmes To select the right drying progra mme, follow the fabric care symbols on garment labels, e.g. . Programme Symbol Use Extra dry For thick, multi-layered fabrics and mixed l oads. Not suitable for knit ted or woven arti cles such as T-shirts and underwear as they could shrink.
3 Programme overview 17 The stated values f or the programme dura tion and energy apply for the maximum stated capacity with a wa sh spun at approx. 1000 rpm (corre- sponds to a residual moisture of approx. 60 %). A higher spinning speed and a smaller load reduce them by about 20–30 %.
3 Program me overvie w 18 3.3 Fabric type Display Use P1 Airing For refres hing or airing litt le-worn garment s. P2 Silk For drying silk fabrics. Follow the fabric care labels as silk tends to crease easily. Low t emperature for gentle dry ing. P3 Shirts Fabrics are gently drie d to «cupboard dry».
3 Programme overview 19 Capacity Residual moisture Programme duration Energy 2,5 kg – 0h10 0,02 kWh 1,5 kg 0 % to 2 % 0h45 0,51 kWh 7 in total 0 % to 2 % 0h45 0,50 kWh 3 kg 0 % to 2 % 1h55 1,53 kWh .
3 Program me overvie w 20 3.4 Additional functions Function/symbol Use Max. load Easy care Gentle drying for mixed fabrics (e. g. shirts, pullovers , T-shirts). The level of dryness is reduced. 2,5 kg Delayed start Take advantage of cheap-rate electricit y (setting range: 1–24 hours).
21 4 User settings Providing no programme is running and no error message is displayed, the user settings can be changed with the appliance door open or cl osed. The procedure is generally the same for all settings. Changing user setti ngs ➤ Hold the button depr essed for 5 seconds.
4 User settings 22 The following diagra m gives an overview of the possible use r settings. no change restore * Factory setting Childproof lock Level of dryness Factory settings ➤ Hold button depres.
4 User settings 23 4.1 Level of dryness The appliance is designe d to provide the most energy-efficien t drying. The moisture sensor continually monitors the level of dr yness of the washing. If the washing is not being dried sufficiently – or being overdried – the level of dryness can be reset.
4 User settings 24 4.2 Childproof lock The childproof lock is to prevent sma ll children accide ntally starting or stopping a programme. When the childproof lock is on, a programme can only be started by pressing two buttons simultaneously. Switching the childproof loc k on/off ➤ Hold the button depressed for 5 seconds.
25 5D r y i n g Preparing t he applian ce ➤ Plug the appliance in at the mains or turn the wall switch on. Loading the appliance ➤ Open the applianc e door (press the middle of the lock side of the door at the ed ge). ➤ Loosely load wet washing items one by one.
5 Drying 26 5.1 Programme selection An automatic pro gramme is selecte d by pressing step button . All the necessary settings for the programme are made automatical ly. Additional functions can be selected or deselected by pressing the corre- sponding button.
5 Drying 27 Selecting an automatic progr amme ➤ Close the app liance door. – Indicator lights fo r buttons , and flash. ➤ Press button until the indic ator li ght for the desired programme li ghts, or ➤ press button until the fabric ty pe programme e.
5 Drying 28 Selecting timed drying ➤ Close the appliance do or. – Indicator lights for buttons , and flash. ➤ Press the button. ➤ Press repeated ly to select desired d u ration, i.e. 10, 20, 30, 40, 50, 60 or 90 minutes. – The duration selected app ears in the dis play.
5 Drying 29 Selectin g delayed sta rt ➤ Hold button pressed immedi ately after the programm e selection, or keep pressing it until the desired delayed start duration sh ows in the display (max. 24 hours). – The display goes dark. – After the desired delayed start pe riod is up, the progra mme selected starts automatically.
5 Drying 30 5.2 Changing selection During programme selection ➤ Press button . – The next programme is selected. – All selected se ttings are cancelled. 5.3 Interrupting a programme A running programme can be interrupted at any time to add/remove an i tem of washing before time.
5 Drying 31 5.4 Aborting a programme ➤ Press the button. – The programme is aborted and all settings cance lled. 5.5 Programme selection with childproof lock activated How to turn the childproof lock on/off is described in U SER SETTINGS . ➤ Close the app liance door.
5 Drying 32 Programme abort thro ugh door opening ➤ Open the appliance do or. – Running programme is interrupted. ➤ Hold button pressed and also press the f lashing button or .
5 Drying 33 5.6 End of programme – The display shows: – The indicator light for the pr ogramme that h as finished i lluminates. – The indicator light for the button flashes. «Crease guard» starts if the appliance is not unloa ded straightaway.
34 6 Care and maintenance 6.1 Cleaning intervals Pos. Part Cleaning intervals Cleaning 1 Door filter each time af ter a drying programme remove an y fluff whenever there is a heavier build-up of depos.
6 Care and maintenance 35 6.2 Error message A9 Check and, if neces sary, clean the following parts i n the appliance: • Door filter • Base cassette • Mesh filter in ba se • Filter mat in base mesh filter 6.
6 Care and maintenance 36 ➤ Open the appliance do or. ➤ Lift the door filter 1 out. ➤ Remove any fluff. ➤ Hold door mesh filter up to the light to detect deposits.
6 Care and maintenance 37 ➤ Open the applianc e door. ➤ Open the cover 1 by pressing the release catch 2 . ➤ Remove the cassette in base 3 . ➤ Remove fluff fro m the base mesh filter in the base cassette. ➤ Replace the cassette in base and close the cover.
6 Care and maintenance 38 6.7 Cleaning the filter mat ➤ Open the appliance do or. ➤ Open the cover 1 by pr essing the release catch 2 . ➤ Remove the cassette in base 3 . ➤ Remove the mesh f ilter in base 4 from the cassette in base. ➤ Remove the filter ma t 5 from the mesh filter in base .
6 Care and maintenance 39 ➤ Open the applianc e door and the cleaning cover. ➤ Remove the cassette in base. ➤ Clean the filter mat ca refully using a vacuum cleaner with the crevice tool attachment. ➤ Replace the cassette in base and close the cleaning cover.
40 7 Trouble-shooting This section lists problems w hich you ca n resolve simply yourself by following the instructions given. If any other error messages app ear or if you are unable to resolve the problem, call Customer Servic es.
7 Trouble-shooting 41 … f l a s h e s … f l a s h e s Possible cause Solution • The moisture sensor is dirty or wet. ➤ Clean the moisture sensor and then wipe dry.
7 Trouble-shooting 42 … l i g h t s … l i g h t s Possible cause Solution • The door filter is missing. • The appliance door is open. ➤ Insert the door filter and ensure it is positioned correctly o r close the applia nce door. ➤ Cancel the err or message by pressing the button.
7 Trouble-shooting 43 … l i g h t s … and flash alte rnately Possible cause Solution • Button or was pressed several times without taking into account operating with childproof lock active. ➤ Hold button pressed, then also press button or . You now have control wi th childproof lock activated.
7 Trouble-shooting 44 … and flash alternat ely … it is not possible to select a new programme af ter closing the appliance door … the appliance will not start Possible cause Solution • Over-voltage ➤ Cancel the err or message by pressing the button.
7 Trouble-shooting 45 … the washing is not dry enough … th e programme takes sign ificantly l onger than i ndicated in the disp lay Possible cause Solution • The load contains different types of fabric. ➤ Select a longer pr ogramme. ➤ Select the programme.
7 Trouble-shooting 46 … the washing is charg ed with static ele ctricity … the duration remaining indicator remains frozen for a longer period Possible cause Solution • Wash items that are made of man-made fibres . Static charge is a norm al characteristic of man-made fibres and nothing to do with the appliance.
47 8D r y i n g t i p s 8.1 Fabric care symbols To select the right drying programme, follow the fa bric care symbols on garment labels. General tips • For the wash you are recommend ed not to use fabric conditioners or other fabric care solutions, otherwise co mply with the manufacturer’s instruc- tions.
8 Drying tips 48 • Woollen and silk fabrics often ca rry the «Do not tumble dry» la bel. ➤ For woollen and silk fabrics, follow the fabri c care symbols on garment labels. ➤ Press the button and sel ect the relevant programm e. • For easy-care fabrics (e.
49 9 Spare parts Please give model numbe r and exact descriptio n when ordering pa rts. Door filter Mesh filter in base Filter mat in base mesh filter (2 items) Cassette in base for mesh filter in bas.
50 10 Technical data Dimensions Ambient conditions Electrical con nection ➤ See identification plate Height: 85 cm Width: 60 cm Depth: 60 cm Weight: 65 kg Dry load capacity: 6 kg Permissible room te.
10 Technical data 51 10.1 Notes for testing institutes ➤ The correct determination of the declaration data is given with wash item after an intake phas e of 5 complete dry ing programmes (Automatic programme: Normal drying ). ➤ Wash the base mesh fi lter in the base cassette after ev ery drying programme.
52 11 Disposal Packaging • All packaging materials (cardboar d, plastic film (PE) and poly styrene (EPS)) are marked and s hould, if possible, be colle cted for recycling and disposed of in an environmentally frien dly way. Disconnection • Disconnect the appliance from the mains.
53 12 Index A Additional functions . . . . . . . . . 12, 20 Additional programme . . . . . . . . . . 12 Airing . . . . . . . . . . . . . . . . . . . . 15, 18 Ambient conditions . . . . . . . . . . . . 50 Appliance Construction . . . . . . . . . . . . .
54 12 Index F F.. Call Customer Services . . . . . . 43 Fabric care symbols . . . . . . . . . . . 47 Fabric conditioners . . . . . . . . . . . . 47 Fabric types . . . . . . . . . . . . . . . . . 18 Factory settings . . . . . . . . . . . . . . . 24 Filter mat Cleaning .
55 13 Repair service Whether you contact us abo ut a malfunction or an orde r, please alwa ys state the serial number (FN) and the model type of your appli ance. Enter these details below and also on the s ervice sticker which comes with the ap pliance.
Quick instructions Please firs t read the sa fety preca utions in th e operatin g instructi ons! ➤ Open the appliance do or ➤ Check the door filter ➤ Load the washing ➤ Close the appliance do .
Ein wichtiger Punkt beim Kauf des Geräts V-Zug Adora TL WP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie V-Zug Adora TL WP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für V-Zug Adora TL WP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von V-Zug Adora TL WP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über V-Zug Adora TL WP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon V-Zug Adora TL WP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von V-Zug Adora TL WP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit V-Zug Adora TL WP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei V-Zug Adora TL WP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
