Benutzeranleitung / Produktwartung TD-W8960N des Produzenten TP-Link
Zur Seite of 122
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router Rev: 4.0.0 1910010506.
COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders.
FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CE Mark Warning This is a class B product. In a domestic environmen t, this product may cause radio interference, in which case the user may be required to take adequate measure s.
South Building, No.5 Keyuan Road, Central Zone, Science & Technology Park, Nanshan, Shenzhen, P. R. China DECLARA TION OF CONFORMITY For the following equipment: Product Description: 300Mbps Wireless N ADSL2+ Modem Router Model No.
CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Product Overview ................................................................................... 2 1.1 Overview of the Router .
4.4.13 UPnP ............................................................................................................................... ... 60 4.4.14 Interface Grouping ..............................................................................
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Package Content s The following contents should be found in your package: ¾ One TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router ¾ One pow.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 1. Product Overview Thank you for choosing the TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router . 1.1 Overview of the Router The TD-W8960N 300Mbps Wireless N ADSL2+ Modem Route r integrates 4-port Switch, Firewall, NAT-Router and Wireless AP.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 1.2 Main Features ¾ Complies with IEEE 802.11n to provide a wireless data rate of up to 300Mbps ¾ One RJ11 LINE port, four 10/100M Auto-N .
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 1.3 Panel Layout 1.3.1 The Front Panel The Router’s LEDs are located on the front panel. Figure 1-1 The Router’s LEDs and the QSS button are locate d on the front panel (View from left to right).
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: 1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 2. Connecting the Router 2.1 System Requirement s ¾ Broadband Internet Access Service (DSL/Cable/Ethernet). ¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 2-1 7.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 3. Quick Inst allation Guide This chapter will show you how to configure the basic f unctions of your TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router using Quick Setup Wizard within minutes.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-2 Step 3: Select General tab, highlight Internet Protocol (TCP/IP) , and then click the Properties button.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK . Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server addre ss automatically” in the screen above.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide If the result displayed is similar to the screen shown belo w, it means t hat your PC has not connected to the Router.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-8 ) Note: 1) Do not mix up the user name and password with your ADSL account user name and password which are needed for PPP connections. 2) If the above screen does not pop up, it means that your Web-br owser has been set to a proxy.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide values assigned by your ISP. Here we select PPPoE WAN Link Type for example, enter the Username and Password given by your ISP, and then click Next . Figure 3-10 ) Note: The Quick Setup Wizard will guide you to conf igure the WAN Service over ATM interface.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-11 ) Note: All the existed ATM & WAN service will be cleared after clicking the Save button on this Quick Setup page. 5. You will see the Finish screen below, click Reboot to save these settings.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 3-13 7. You will see the current configuration has been added to Layer2 Interface list ( 4.4.1 Layer2 Interface ) shown in Figure 3-14 and WAN Service list ( 4.4.2 WAN Service ) shown in Figure 3-15 .
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Chapter 4. Configuring the Router This chapter will show each Web page's key function and the c onfiguration way. 4.1 Login After your successful login, you will see the six main menus on the left of t he Web-based utility.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-1 ) Note: Click the other submenus under the main menu Device Info , and you wil l be able to view the corresponding information about WAN , Statistics , Route , ARP and DHCP . 4.3 Quick Setup Please refer to Section 3.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide This Advanced Setup section main ly introduces how to configure the Router for adequate use. The detailed explanations for eac h subsection are provided below. ) Note: To completely configure the WAN Interface, you need to first select the Layer 2 Interface ( 4.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-2 ¾ Remove : Select the check box in the t able on the screen above and then click the Remove button, the corresponding interfac e will be deleted in the table. ) Note: If the interface is used by the configuration of the 4.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-3 ¾ VPI / VCI : the VPI and VCI values provided by your ISP. Do not change them unless it was required by your ISP. ¾ DSL Link Type : Select a DSL Link Type which is prov ided by your ISP.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide this, it cannot be set for the connection type of CBR and Real-tim e VBR. If you select the QoS service, the Quality of Service menu will be added to the Web-based Utility, th e detailed configuration will be described in 4.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-6 ¾ Remove: Select the check box in the tabl e on the screen above and then click the Remove button, the corresponding interfac e will be deleted in the table. ) Note: One ETH is allowed to configure as the layer 2 WAN Interface.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: 1) The following section adopts different VPI, VCI to introduce further configuration for the different connection types, if y ou need to change the configuration of ATM PVC (VPI/VCI), you should go to the previous section ( 4.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4. Enter the following parameters and then click Next . Figure 4-10 ¾ PPP Username/Password : Enter the User Name and Pas sword provided by your ISP. These fields are case-sensitive. ¾ PPPoE Service Name : Enter the Service Name if it was pr ovided by your ISP.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide PC, and the NAT and SPI Firewall will be closed. Sometimes you can think it as bridge while PPP dialing in the router. It’s a special feat ure deployed by some I SP. Unless your ISP specifically requires this setup, do not select it.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: If only single PVC with IPoA is configured, you must enter static DNS server IP addresses. 7. On the next screen you w ill see the detailed settings you’ve made. Please click the Apply/Save button to save these settings.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.2.2 ATM-EoA-IPoE If your ISP provides an IPoE connection and you need to use an AT M Interface, follow the steps below to add a WAN service over a selected ATM interface: 1. Add a new ATM interface and select EoA option for DSL Link Type ( 4.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Alternatively, the device may use IAID value 1 for the virtual circuit corresponding to the first connection object in the data model and value 2 for th e second connection object in the data model.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 6. Select a preferred WAN interface as the system default gateway and click Next . Figure 4-17 7. Configure the DNS Server A ddresses on the screen as follows. Figure 4-18 ) Note: If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-19 4.4.2.3 ATM-EoA-Bridging If you want to adopt the Bridge service and you need to use an AT M Interface, follow the steps below to add a WAN service over a selected ATM interface: 1.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.2.5 ATM-IPoA If your ISP provides an IPoA connection and you need to use an AT M Interface, follow the steps below to add a WAN service over a selected ATM interface. 1. Add a new ATM interface and select IPoA option for DSL Link Type (see 4.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-20 4.4.3 LAN Choose “ Advanced Setup ” Æ “ LAN ”, and you will see the LAN screen (shown in Figure 4-21 ), the section allows you to configure the Router’s LAN ports settings.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-21 ¾ IP Address: You can configure the Rout er’s IP Address and Subnet Mask for LAN Interface. • IP Address: Enter the Router’s local IP Address, then you can access to the Web-based Utility via the IP Address, t he default value is 192.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide • Start IP Address: Enter a value for the DHCP server to start with when issuing IP addresses. Because the default IP address for the Router is 192.168. 1.1, the default Start IP Address is 192.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Service for the interface on the section 4.4.2 WAN Service , the blank for MAC Address will display “Need a corresponding WAN Service”. The last one of W AN Interface List di splays your PC’ s current address.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-24 4.4.5.1 Virtual Servers Choose “ Advanced Setup ” Æ “ NAT ” Æ “ Virtual Servers ”, you can set up virtual servers on the screen below (shown in Figure 4-25 ). Virtual servers can be used for setting up public se rvices on your LAN, such as DNS, Email and FTP.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Remove: Select the check box in the table (shown in Figure 4-25 ) and then click the Remove button, then the corre sponding entry will be deleted in the table. To add a virtual server entry: 1.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: If you select the service from t he drop-down list, the External Port Start, External Port End, Internal Port Start, Internal Port End and the Pr otocol will be added in the table automatically.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-28 2. Select the application from the drop-down list. If the list does not hav e the application that you want, select the Custom application radio button, and type the name of the custom application in the text box.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-29 To add a new DMZ Host: You can enter the computer's IP address and then click Save/Appl y to activate the DMZ host you set on this page. ) Note: DMZ host forwards all the ports at the same ti me.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide The Outgoing IP Filtering feature allows you to co ntrol some IP traffic from LAN to access to some specifically addresses. By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: When you add an Outgoing IP Filtering entry, you must configure at least one condition on the preceding screen except the Filter name.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-34 2. Enter the Filter name for the rule, it is excl usive and must be filled in. 3. Select Protocol in the drop-down list, enter Source IP address , Source Subnet Mask , Source Port , Destination IP address , Destination Subnet Mask , and Destination Port for the rule.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-35 ¾ Change Policy: There are two policies for the MAC filters : FORWARDED and BLOCKED . Select the Change checkbox and click the Change Policy button to change from one policy to another.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-36 2. Select Protocol Type in the drop-down list for the rule. 3. Enter Destination MAC Address and Source MAC Address in the text box. 4. Select Frame Direction in the drop-down list for the rule.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-38 To add a Time Restriction entry: 1. Click the Add button in Figure 4-38 , and then you will see the next screen as shown in Figure 4-39 . Figure 4-39 2. Enter the User Name of the LAN device c onnected to the Router.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: The Time Restriction will not work correctly before the time of the device is set in “ Management Æ Internet Time ”.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.8 Quality of Service Choose “ Advanced Setup ” Æ “ Quality of Service ”, you can enable QoS (Quality of Service) on the screen shown in Figure 4-42 . QoS helps to prioritize data as it enters your router.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-43 Click the Add button in Figure 4-43 , and you can configure t he QoS queue entry on the next screen as shown in Figure 4-44 . Figure 4-44 ¾ Name : Set a name for the entry. ¾ Enable : Select Enable option to take this entry effect.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: 1) Lower integer values for precedence imply highe r priority for this queue relative to others. 2) The queue entry confi gured here will be used by the classi fier to place ingress packets appropriately.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-46 After you specify the condition, click Save/Apply to save the entry. 4.4.9 Traffic Control Choose “ Advanced Setup ” Æ “ Traffic Control ” and then you will see th e screen as shown in Figure 4-47 .
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Enable : Check this box to enable the Traffic Control function. ¾ Egress Total Rate (Kbps) : Enter the upload speed through the WAN port. ¾ Ingress Total Rate (Kbps) : Enter the download speed through the WAN port.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-49 ¾ Rule Status : Select the status of the rule from the drop-down list to enable or disable the rule. ¾ IP Range : Enter a single IP address or a range of IP addresses. ¾ Port Range : Enter a single port or a range of ports.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide there still has surplus bandwidth, it is allocated to the rule with hypo-high precedence. For rules with the same precedence, the surplus bandwidth is allocated to them according to their min egress/ingress rate.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: 1) If changing the Automatic Assigned Default Ga teway from unselected to selected, you have to reboot the Router to get the aut omatically assigned default gateway.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Use Interface: Select the Interface name in the text box, or else, the default Use Interface will be adopted for the Static Route.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.4.11 DNS When you select the connection type PPPoE , PPPoA or IPoA for WAN configuration, you will see the DNS menu in the Web-based Utility (shown in Figure 4-56 ). It includes DNS Server and Dynamic DNS submenus.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide For single PVC with IPoA, static IPoE protocol, please select the Use the following Static DNS IP address checkbox, and enter the primary and /or optional secondary DNS server IP addresses provided by your ISP.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-59 2. Select D-DNS provider in the drop-down list. 3. Enter the Hostname of the DNS Server, and select the corresponding Interface for the DDNS, you can leave it default. 4. Type the User Name and Password for your DDNS account.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-60 You can select the modulation ty pe, phone line pair and the capabilit y of Bitswap or SRA.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-61 Select the checkbox and click Save/Apply to enable the UPnP function. 4.4.14 Interface Grouping Choose “ Advanced Setup ” Æ “ Interface Grouping ”, you can configure multiple ports to PVC and bridging groups to perform as an independent network.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide To create a new interface group: 1. Click the Add button. You can add a new inte rface group in the next screen. Figure 4-63 2. Enter a unique name for Group. 3. Select the Interface which you w ant to use from the drop-down list.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4. Select interfaces from the available interface list and add it to the grouped interface list using the arrow buttons to create t he required mapping of the ports. ) Note: These clients may obtain public IP addresses.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-65 This section will guide you to configure a VPN tu nnel between two TD-W89 60Ns. The topology is as follows. ) Note: You could also use other VPN Routers to set VPN tunnels with TD-W8960N.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-66 ¾ IPSec Connection Name: Enter a name for your VPN. ¾ Remote IPSec Gateway Address (IP or Domain Name): Enter the destination gate way IP address in the box which is the publ ic WAN IP or Domain Name of the remote VPN server endpoint.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Pre-Shared Key: Input the Pre-Shared key for Authent ication. (For ex ample: Input 12345678) ¾ Perfect Forward Secrec y: PFS is an additional security protocol. We recommend you leave the Advanced Settings as default value.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Key Life Time: Enter the number of seconds for the IPSec lifetime. It is the period of time to pass before establishing a new IPSec security association (SA) with the remote endpoint. The defa ult value is 3600.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide This page allows you to configure basic features of the wireless LA N interface. You can enable or disable the wireless LAN interfac e, hide the network from active scans, set the wireless network name (also known as SSID) and restrict t he channel set based on Region requirements.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-68 4.5.2.1 QSS (WPS) Setup Back to LED Explanation This section will guide you to add a new wire less device to an existing network quickly by QSS (Quick Security Setup) method. It’s also called WPS (Wi-Fi Protected Setup) in some cases.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-69 Method One: Hardware push button. Step 1: Press the QSS button on the front panel of the Router. Step 2: Press and hold the QSS button of t he adapter directly for 2 or 3 seconds.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-70 Method Two: Step 1: Press the QSS button on the front panel of the Router. Step 2: For the configur ation of the wireless adapter, please choose “ Push the button on my access point ” in the configuration utility of t he QSS as below, and click Next .
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration. Figure 4-72 II. By PIN If the new device supports Quick Security Set up and the PIN method, y ou can add it to the network by PIN with the following two methods.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-73 ) Note: The PIN code of the adapter is always displayed on t he QSS configuration screen.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-74 ) Note: In this example, the default PIN code of this adapter is 16952898 as the preceding figure shown. Method Two: Enter the PIN of my Router into the wireless adapter. Step 1: Get the Current PIN code generated by the Router as show n below.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-75 Step 2: For the confi guration of the wirele ss adapter, please choose “ Enter a PIN from my access point ” in the configuration utility of the QSS as below, and enter the PIN code of the Router into the field after “ Access Point PIN ”.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-76 4.5.2.2 Manual Setup AP Follow the instructions below to configure security features of the wirele ss LAN interface manually.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-77 ¾ Network Authentication: Select an authentication type from the drop-d own list. Options available are: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA, and Mixed WPA2/WPA-PSK.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide below to configure the Shared Keys. Figure 4-78 Figure 4-79 78.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Encryption strength: Select the appropriate level of encryption, 64-bit or 128-bit. ¾ Current Netw ork Key: To indicate which WEP key to use, select a transmission key number. ¾ Network Key 1-4: If you want to manually enter the WEP keys, then enter them in the network Key 1-4 fields.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 2. WPA WPA security for wireless communication has been de veloped to overcome some of the shortcomings of WEP. WPA comb ines the key generation with t he authentication se rvices of a RADIUS server.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-82 3. WPA-PSK WPA-PSK requires a shared key and does not use a separ ate server for authentication. PSK keys can be ASCII or Hex type. Figure 4-83 ¾ WPA Pre-Shared Key: Enter the key shared by the Router and your other network devices.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Configure WPA-PSK settings 1. Select WPA-PSK . The menu will change to offer the appropr iate settings as the picture show above. 2. WPA-PSK requires a shared key. Type the key in the space provided.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-86 ¾ WPA2 Preauthentication: Select Enable from the drop-dow n list, Stations will authenticate with the AP during the scanning process, and once association is required, the station has been already authenticated.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 6. Mixed WPA2/WPA To configure Mixed WPA2/WPA settings, select the Mixed WPA2/WPA option from the drop-down list. The menu will change to offer the appropriate settings. The steps to these settings are similar to those for WPA-PSK.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.5.3 MAC Filter Choose “ Wireless ” Æ ” MAC Filter ”, you will see the screen of Wireless--MAC Filter settings shown as below. Figure 4-90 Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.5.4 Wireless Bridge Choose “ Wireless ” Æ ” Wireless Bridge ”, you will see the screen of Wireless--Bridge settings shown as below. You can configure wireless bridge features of the wireless LAN interface and click Apply/Save button to save the cu rrent configuration.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide • Enabled (Scan) : Select this option to enables wirele ss bridge restriction, and it will scan the environment for APs that exist around t he device. Only those selected AP will be granted access.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-95 ¾ Channel: Select the channel you want to use from the drop-down List. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearb y access point.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Interval value. Its clients hear the beacons and awaken to rece ive the broadcast and multicast messages. The default value is 1. ¾ Beacon Interval: Enter a value between 20-1000 millisec onds.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-97 4.7 Management Choose “ Management ”, there are eight submenus under the main menu. They are Settings , System Log , SNMP Agent , TR-069 Client , Access Control , Update Software and Reboot .
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-98 4.7.1.1 Export Choose “ Management ” Æ “ Settings ” Æ “ Export ”, you can see the Export screen, this screen (shown in Figure 4-99 ) allows you to save the current confi guration of the Router as a backup file.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide TD-W8960N Figure 4-101 4.7.1.2 Import Choose “ Management ” Æ “ Settings ” Æ “ Import ”, you can see the Import screen, this screen (shown in Figure 4-102 ) allows you to update the Router’s settings.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.7.1.3 Restore Default Choose “ Management ” Æ “ Settings ” Æ “ Restore Default ”, you can see the Restore Default screen, this screen (shown in Figure 4-103 ) allows you to restore the R outer’s configuration to the factory defaults on the screen.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Figure 4-105 ¾ Refresh: Click the button, the informati on in the table will be updated. ¾ Close: Click the button, the screen will be closed.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.7.3 SNMP Agent Choose “ Management ” Æ “ SNMP Agent ”, you can see the SNMP-Configuration screen as shown below.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Syst em Name: Enter alphanumeric string to specify an SNMP community string name. Your Router (SNMP agents) will expose managemen t data on the managed systems as this "system name".
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ WAN Interface used by TR-06 9 Client : Please select the WAN In terface from the drop-down list to perform this function. ¾ Connection Request User Name: Type the Connection Request Us er Name, set it yourself.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide access your DSL Modem Router for maintenan ce and to run diagnostics. The user name "user" can access the DSL Modem Router, view configuration settings an d statistics, as well as, update the Router's software.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide 4.7.7 Reboot Choose “ Management ” Æ “ Reboot ”, you can see t he screen (shown in Figure 4-111 ) which allows you to reboot the Router. Figure 4-111 ) Note: 1) After you clicked the Reboot button, please wait for a while before reo pening your web browser.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix A: F AQ 1. How do I configure the Router to access Internet b y ADSL users? 1) First, configure the ADSL Modem configured in RFC1483 bridge model. 2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ) Note: Your opposite side should call your WAN IP , which is displayed on the “Status” page. 4) How to enabl e DMZ Host: Log in to the Router, click the “ Advanced Setup - NAT ” menu on the left of your browser, and click " DMZ Host " submenu.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide the " Virtual Servers " submenu. On the " Virtual Servers " page, click Add New , then on the “ Add or Modify a Virtual Server ” page, enter use “80” as service port, and your IP address next to the “ Server IP Address ”, assuming 192.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix B: Configuring the PC For Windows XP OS Go to Start > Control Panel , you will then see the following page.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Double-click Internet Protocol (TCP/IP) Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK 10.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Click OK 105.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide For Windows Vista OS Go to Start > Settings > Control Panel , and then you will see the following page.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Double-click Internet Protocol Version 4 ( TCP/IPv4 ) Select Obtain an IP address automatically Select Obtain DNS server address automatical.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide For Windows 7 OS Go to Start > Settings > Control Panel , and then you will see the following page.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Double-click Internet Protocol Version 4 ( TCP/IPv4 ) Select Obtain an IP address automatically Select Obtain DNS server address automatical.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix C: S pecifications General Standards ANSI T1.413, ITU G.992.1, ITU G.992. 2, ITU G.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multiple-input multiple-output).
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ DDNS ( D ynamic D omain N ame S ystem) - Allows the hostin g of a website, FTP server, or e-mail server with a fixed domain name (e .g., www.xyz.com) and a dynamic IP address. ¾ Default Gateway - A device that forwards Internet traffic from your local area network.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ LAN - The computers and networking products that make up your local network. ¾ MAC ( M edia A ccess C ontrol) Address - The unique address that a manufacturer assigns to each networking device.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide ¾ Static Routing - Forwarding data in a network via a fixed path. ¾ Subnet Mask - An address code that determines the size of the network.
TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide Appendix E: T echnical Support Technical Support For more troubleshooting help, go to: www.tp-link .com/support/faq.asp T o download the latest Firmware, Driver , Utility and User Guide, go to: www.
Ein wichtiger Punkt beim Kauf des Geräts TP-Link TD-W8960N (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie TP-Link TD-W8960N noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für TP-Link TD-W8960N - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von TP-Link TD-W8960N reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über TP-Link TD-W8960N erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon TP-Link TD-W8960N besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von TP-Link TD-W8960N verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit TP-Link TD-W8960N. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei TP-Link TD-W8960N gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
