Benutzeranleitung / Produktwartung SMCWBR 14-GM des Produzenten SMC Networks
Zur Seite of 69
.
1 SMCWBR14-GM W ir eless Br oadband Rout er with MIMO T echnology User ’ s Manual.
2 Copyright The contents o f this publication may no t be reproduced in any par t or as a whole, stored, transcribed in a n in form ation retrieval syste m, transl ated into an y lan guage, or transmi.
3 T ab le of Contents Introduction Features System Requirem ents Package List Hardware Ports and Buttons LED Indicators Getting S tarted Configuring W ireless Broa d band Ro u ter System Settings W AN.
4 Introduction Congratulati on s on your purchase of th is outstanding W ireless Broadband Router . This produc t is specifically d esigned for Small Office and Home Office needs. It provid es a complet e SOHO solution for Internet surfin g, and is easy to co nfigure and op erate even f or non-t echnical us ers.
5 Enable you to expose WWW , FTP and other services on your LAN to be accessible to Inte rnet users. User -Definable Applica tion Sensing T u nnel User can define the attributes to suppor t the specia.
6 VPN Pass-through The router also supports VPN pass-through. 802.1X support ed When the 802.1X function is enable d, the W ireless user must authentica te to this router fi rst to use the Network service.
7 connection. TCP/IP and NetBIOS network protocol instal led. Internet Browser installed. The SMCWBR 14-G M requires an e xternal 12V , 1A power supply which is inc lude d in the SMCWBR14-GM packa ge. For safe operatio n, please use on ly the power adapter provid ed by SMCWBR14-GM.
8 W AN the port where you will connect your cable (or DSL) m odem or Ethernet ro uter . Port 1-4 the ports where you will connect ne tw or ked com puters an d other devices. LED Ind icat ors Front Panel Figure 1-2 Front Panel LED: LED Function Color Sta tus Description Powe r Powe r indication Green On Power is being a pplied to this product.
9 Link. 1~4 Link status Green On An active station is connected to the corr espon din g LAN port. Blinking The correspon ding LAN port is sending or receiving data. Speed 10/100 Data Rat e Green On Data is tran smitting in 100Mbps on the co rresponding LAN port.
10 Figure 2-1 Se tup o f LAN and W AN connections for this product. Setup W AN connection Prepare an Ether net cable for connectin g this product to your cable/xDSL modem or Eth ernet backbone.
11 items in sequence: Is the Ethernet ca ble correctly connec te d between this product and your computer ? Configuring W ireless Broadband Router This product provides W eb based configuratio n scheme that is, conf iguring by your W eb browser , such as Netscape Communicator or Inter net Explorer .
12 Activate your br owse r , and disa ble the proxy or add the IP addre s s of this pr oduct into the exceptions . Then, type this product’ s IP addre ss in the Location (for Ne tscape) or Address (for IE) field and press ENTER. For example: http://1 92.
13 This option prov ide s the func tion for ob se rvin g thi s produc t’ s working status: W AN Port Status. If the W AN port is assigned a dynamic IP , there may appear a “ Rene w ” or “ Release ” button on the Sidenote c olumn. Y ou can click this bu tton to renew or r elea se IP m anually .
14 Setup W izard will guide you through a ba sic configuration pr ocedure step by s tep. Set the basic W ireless Parameters and P ress ”Next >” Setup Wizard - Select Time Z one.
15 Select the W AN Access T ype Set your username an d password. Y ou might select fr om the 3 diffe rent conn ec tion profiles. Be car eful with Always onlin e if you do not have a flatrat e-connecti.
16 System Settings Tim e Zo ne Password Se ttin gs.
17 Enable / Disable Remote Managemen t W AN Setup This option is primar y to enable th is produc t to work proper ly . The setting items and the web.
18 appearance de pend on the W AN type. Choose cor rec t W AN type before you start. St a t i c I P A d d r e s s : ISP assigns you a static IP address. W AN IP Address, Subnet Mask, Gateway , Primary and Secondary DNS: enter the proper setti ng pr ovided by your ISP .
19 the password, kee p it empty . Connectio n ID: optional. Input the con nection ID if your IS P requires i t. Maximu m Idle T ime: the ti me of no act ivity to d isconnect your P PTP session. Set it to zero or enable Auto-reconnect to disabl e this feature .
20 DNS Set the prima ry and Secondar y DNS server(s) as assigne d by your ISP . If you are using dif f erent DNS servers than your ISP , the Internet response-times might be slower and some sites mig ht beco me inaccesib le.
21 LAN & DHCP Server The settings of a TCP/IP environment include host IP , Subnet Mask, Gateway , and DNS configurations. It is not easy to manua ll y configure all the computers and dev ices in your network. For tunately , DHCP Server provides a rather sim ple approach to ha ndle all these sett ings.
22 W ireless Settings W ireless settin gs al low you to set the w ireles s configuration item s. Network ID (SSID) : Network ID is used for identifyi n g the W ireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same N etwork ID.
23 RADIUS Server : IP address or the 802.1X server’ s domain-name. RADIUS Sh ared Key Key value sha red by the RAD I US server and this router . This key value is consistent with the key value in th e RADIUS server . WP A-PSK Select Encryp tion and Pre-share Key Mode.
24 WP A Check Box w as used to switch the funct ion of the WP A. When the WP A function is enab led, the Wi r e l e s s u s e r m u s t authenticate to this router first to use the Netw ork service. RADIUS Server IP address or the 80 2.1X server ’ s domain-name.
25 the length of Pr e-share key is from 8 to 63. Key value sha red by the RAD I US server and this router . This key value is consistent with the key value in the RADIUS server .
26 Blue Line: W ireless B l a c k L i n e : W i r e If the Settings are ok, the client1 an d client2 can get I P from DHCP server . Of AP1.Then Client 1 and Client2 can get inform at ion each ot her .
27 AP2 Setting : AP2 ÅÆ AP1 (Rem ote Mac: 00-50-1 8-00-0 f-fe ) AP3 Setting: AP3 ÅÆ AP1 (Rem ote Mac: 00-50-1 8-00-0 f-fe ).
28 NA T V irtual Server This product’ s NA T firewall filters out u nre cognized packet s to protect your Intranet, so a ll hosts behind this product are invisi ble to the outside world. If you wish, you can m ake some of them accessible by enab ling the V irtual Server Mapping.
29 Some applicat i ons require multiple c onnections, like Inter net games, V ideo conferencing, Internet teleph on y , etc. Because of the fire wall function, these app lications cannot work w it h a pure NA T router . The Special App lications feature allo ws some of t hese applic ations to wo rk with this prod uc t.
30 Firewall Parent al Contro l This option lets you enable / disable web sites / services by setting up rules..
31 MAC Filter This option le ts you control the W ireless clients connec tiong to your MIMO W ireless Router . Each on of them will be checked before letti ng them connect wirelessly .
32 URL (W ebsite) Blocking URL B locking will block LAN computer s to connect to pre-defined W ebsites. The major dif ference betwee n “Domain filter” a nd “URL Blocking” is Domain filter require user to input suf fix (like .com or .or g, etc), while URL Blocking require use r to input a keyword on ly .
33 Advanced Fir ewall Se ttings Enable the Advanced F irewall Protectio n if you want: Hacker attack monito ring a nd logging Advanced System Log Email Notification Enable the Dis card Ping from W AN option if you don’ t want to be seen o n the Internet.
34 Demilita rized Zone (DMZ) This option le ts you open all por ts to one workstation be hind your Router . Be careful with this option, because it let’ s everybody access that partic ular PC fr om ever yw here.
35 Dynamic DNS Services T o host your server on a changing IP address, you have to use dy namic domain name service (DDNS). So that anyone wishing to reach your hos t only needs to know the name of it. Dynam ic DNS will map the name of your host to your current IP address, which changes each tim e you conn ect your Internet service provider .
36 UPnP The Universal Plug and Play architec t ure offer s pervasive pe er- to- peer network con nec tivi ty of PCs of all fo rm factors, int elligent appli ances, and wirel ess devices.
37 Configuration T ools Firmwar e Upgrade Y ou can upgrade firmw are by clicki ng Apply button..
38 Backup Settings Y ou can backup yo ur settings by clic king the Back up Se ttin g button and save it as a bin file. Once you want to restore these settin gs, please click Firm war e Upgrade button an d use the bin file you saved.
39 Appendix A TCP/IP Configuration f or W indows 95/98 This section i n troduces you how to ins tall TCP /IP protocol into your pe rsonal computer . A nd suppose you h ave been successfu lly installed one network car d on your persona l computer . If not, please refe r to your network car d manual.
40 The TCP /IP protocol sha ll be listed in the Networ k window . Click OK to com plete the i nstall procedure and restart your PC to enab le t he TCP/I P protocol. A.2 Set TC P/I P Protoc ol for W orking with NA T Router Click St a r t button and cho ose Setti ngs , then click Contr ol Panel .
41 Click Pr operties button to set the TCP/IP protocol for this NA T Router . Now , you have two setting metho ds :.
42 Select Obtain an IP address automatically in the IP Address tab. Don’ t input any value i n the Gateway ta b..
43 Choose Disable DNS in the DNS Configuration tab. Configur e I P manually Select Specify an IP address in the IP Address tab. The default IP address of this pr oduct is 192.168.2.1. So please use 192. 168.2.xxx (xxx is between 1 and 253) for IP A ddr ess field and 255.
44 In the Gat eway tab, add the IP address of this product (default IP is 192.168.2.1) in the New gateway fiel d and click Add button. In the DNS Configuration tab , add the DNS values wh ich ar e pro.
45 Server Search Order field and click Add button. Appendix B 802.1x Settin g Figure 1: T esting Environment (U se W indows 2000 Radius Server) 1 Equipment Details PC1:.
46 Microsoft W indows XP Professional without Service Pack 1. D-Link DWL-650+ wireless LAN adapte r Driver ver s ion: 3.0.5.0 (Driver da te: 03.05.2003) PC2: Microsoft W indows XP Professional with Service P a ck 1a. Z-Com XI-725 wireless LAN USB adapt er Driver ver s ion: 1.
47 Enable the 802.1X (check the “Enable chec kbox“). Enter the RADIUS server IP . Enter the sha red key . (The key shared by the RADIU S server and DUT). W e will chang e 802.1X encrypti on key le ngth to fit the vari able te st conditio n. Setup Network adapter on PC 1.
48 Figur e 2: En able IEE E 802. 1 X acce ss con t r ol.
49 Figure 3: Smart card or certificate pr operties 4. W indows 2000 RADIUS serv er Authentication testing: 4.1DUT authenticate PC1 us ing certificate. (P C2 fo llows the same test procedures.) Down load and i nstall the ce rtificat e on PC1. (Fi g 4) PC1 choose the SSID of DUT as the Access Point.
50 Figur e 4: Certificate inf ormation on PC1 Figur e 5: Authenticating.
51 Figure 6: Authentication success 4.2 DUT authenticate P C2 using PEAP -TLS. PC2 choose the SSID of DUT as the Access Point. Set authentication type o f wireless client and RADIU S server both to PEAP_TLS. Disabl e the wire less conne ction and en able again .
52 Appendi x C WP A-PS K and WP A W ireless Route r : LAN IP: 192.168.2.1 W AN IP: 192.168.122. 216 Radius Server: 192.1 68.12 2. 1 UserA : XP W ireless C ard:T i-1 1g T ool: Ody ssey Client Manag er Refer to: www .funk.com Download: h t tp://www .funk.
53 Or Another Configuration: WPA-PSK In fact, it is not ne cessary for this funct ion to authentica te b y Radius Server, the clien t and wireless Router authenticate by the mselves. Method1: 1. Go to the Web m anage r of Wireless Router to confi gure, like below: 2.
54 Open “Adapter s” 3. Add and edi t som e settings:.
55 4. Back to Connection: Then Select “Connec t to network” Y ou will see: Method2:.
56 1. First, patch windows XP and have to install “Service pa ckage 1” Patch: http://www .microsoft.co m/downloads/d etails.aspx?dis playlang= en&FamilyID=5039e f4a-61e0-4 c44-9 4f0-c25c9de0a ce9 2. Then reboot. 3. Setting on the router and client: Router: Client: Go to “Network Connectio n” and select wireless ada pter .
57.
58 WP A: For this function, w e need the ser ver to authentica te. This function is like 802.1x. The above is our environmen t: Method 1: 1. The U serA or UserB have to ge t certificate from Radius, first.
59 2. Then, Install this cer tifica te and fin ish. 3. Go to the Web m anage r of Wireless Router to confi gure, like below: 4. Go to Odyssey Client Mana ger , choose “Profiles” and Setu p Pr ofil.
60 Login name and pa ssword are fae1 and fa e1. Remember that you ge t certificate from Radi us in Step1. 5. Then Choose “ certificate” like above.
61.
62 6. Then go to A uthentication and first Remove EAP/ TLS and Add EAP/TLS again..
63 7. Go “Netwo rk” and Select “1” and ok.
64 8. Back to Connect ion an d S elec t “12 3kk. If successfully , the wireless client has to authenticate w ith Radius Ser ver , like below: 9.Resu lt: Method 2: 1.
65 http://192. 168.122.1/certsrv account:fae1 passwd:fae1 2. Then I nstall this certificate and finish. 3. Setting on the router and client: Router:.
66 Client: Go to “Network Connectio n” and select wireless ada pter . Choose “V iew available W ireless Networks” li ke be low: Advanced Æ choose “123kk” Select “W irelessCA and Ena b l.
67 Then, if the w irele ss client wants to assoc iate, it has to re quest to authentica te. Appendix D F AQ and T roubleshoo ting Reset to factory Defau lt There are 2 m ethods to reset to default. Restore with RESET b utton First, turn of f the router and pr e ss the RESET button in.
38 T esla Irvine, CA 92618 Phone: (949) 679-8000 TE CHNICAL SUPPOR T F r om U.S.A. and C anada (2 4 hours a da y , 7 day s a week ) (800) SMC -4- Y OU Phn: (94 9) 6 7 9-8000 F ax: (94 9) 67 9-1481 ENGLISH T echnical S upport information a vailable at www .
Ein wichtiger Punkt beim Kauf des Geräts SMC Networks SMCWBR 14-GM (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SMC Networks SMCWBR 14-GM noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SMC Networks SMCWBR 14-GM - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SMC Networks SMCWBR 14-GM reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SMC Networks SMCWBR 14-GM erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SMC Networks SMCWBR 14-GM besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SMC Networks SMCWBR 14-GM verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SMC Networks SMCWBR 14-GM. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SMC Networks SMCWBR 14-GM gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
