Benutzeranleitung / Produktwartung Barricade SMC7004AWBR des Produzenten SMC Networks
Zur Seite of 94
Barricade ™ Wi r e l e s s Broadband Router W ir eless Br oadband Router ◆ Internet a ccess vi a – • 10 Mbps W AN port connection to xDSL/Cable modem, or • RS-232 c onsole port connec tion t.
.
6 Hugh es Irvi ne, CA 9 2618 Phone: (949) 707-24 00 Barricade ™ W ir eless Br oadband Router User Guide From SMC ’ s Ba rri cad e li ne of Br oa dban d R oute rs Augu st 2 001 Part N umber: 0 1-11.
Copyright Informat ion furnis hed by SMC Networks, Inc. (SMC) is believed to be accu rate and reliable. However , no resp onsibility is as sumed by SMC fo r its u se, nor fo r any infrin gemen ts of pa tents or other righ ts of third p arties whic h may resu lt from its use.
v L IMITED W ARRA NTY Limite d W arranty Stat ement: SMC Networks , Inc. (“SMC”) warrants its products to be fr ee fr om defe cts in wor kmans hip and mate rials, u nder n or mal use and service, for the applicable warranty term.
L IMITED W ARRA NT Y vi W ARRANTIES EXCLUSIVE: IF AN SMC PRO DUCT DOE S NOT OP ERA TE AS W ARRANTED ABOVE, CUSTOMER’S SOLE RE MEDY SHALL B E REP AIR OR REPLAC EMENT OF THE P RODUCT IN QUES TION, A T SMC’S OPTION.
vii C OMPLIANCES FCC - Class B This equip ment has b een t ested an d fo und to com ply wi th t he lim its for a Clas s B digital dev ice, pursuant to Part 15 of the FCC R ul es. The se li mits ar e des igne d to provide reas onable protec tion against har mful i nterfe renc e in a residen tial installat ion.
viii Industry Canada - Class B This digital appar atus does not e xceed the Clas s B limi ts fo r radio n oise em issions from digi tal apparatus as set out in the inte rference-caus ing equipment st andard entitle d “ Digit al Appar atu s,” ICES -003 o f t he D epart ment o f Comm uni catio ns .
L IMITED W ARRA NT Y Safety Compliance Underwrite rs La boratories Complia nce St atement Important! Before making conne ctions , make sure you h ave the cor rect cord set. Check it (read the la bel on the cable) again st the followin g: The u nit au tomat ically ma tches the c onnec ted i nput vo ltage .
C OMPLIANC ES x 11. Wird das Ge rät üb er einen län geren Z eit raum nicht be nutz t, soll ten Sie es vom Stromne tz trenn en. Som it wir d im Falle eine r Üb erspannu ng ei ne Bes chädigu ng ver miede n. 12. Durch die Lüftungs öffnun gen dür fen nie mals Gegen ständ e oder Flüs sigkeite n in das Gerät gelange n.
xi T ABLE OF C ONTENTS 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 About the Wireles s Barr icade . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Featur es and B enefi ts . . . . . . . . . . . . . . . . . . . . . .
T ABLE OF C ONTENTS xii DNS Con figur ation . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Wirele ss C onfig uration . . . . . . . . . . . . . . . . . . . . . . . . 4-13 Chann el and SSID . . . . . . . . . . . . . . . . . . . . . . . . 4-13 Encry ption .
T ABLE OF C ONTENTS xiii A PPENDICES : A Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 B Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Ether net C able . . . . . . . . . . . . . . . . . . . . .
T ABLE OF C ONTENTS xiv.
1-1 C HAPTER 1 I NTRO DUCT ION Cong ratu lations on yo ur p urchas e of t he Barr icade ™ Wirel es s Broadb and Ro uter . SMC is pr oud t o pr ovid e you with a powerful yet simpl e comm unica tion devic e for connec ting your l ocal area netwo rk (w ire d or w ire less LAN ) to th e In ter net .
F EAT URES AND B ENEFITS 1-2 Featur es an d Benefit s • Internet con nection to xDSL or Ca ble m odem via a 10 Mbps WAN port • Int ernet conne ction to ISDN TA or PS TN modem vi a an RS-232 cons o.
I NTR ODUCT ION 1-3 • Supp orts PPP d ial-in conne ctio n us ing st andard dial -up progr am • Eas y setup th ro ugh a Web browse r on a ny op er ating sy stem that suppo rts TCP /IP • Compatib .
A PPLI CATION S 1-4 • Virtual Ser ver If you h ave a fi xed IP ad dres s, yo u can set up t he W irel ess Bar ricade t o act as a vi rtual host for netwo rk addres s trans lation . Rem ote users acce ss va riou s se rvices at y our sit e usin g a co ns tant IP ad dre ss .
I NTR ODUCT ION 1-5 • Virt ual Pr ivate Network The Wir eless Bar ricad e suppo rts th ree of the most co mmon ly use d VPN pr otoc ols – PPTP , L2TP and IPS ec. Thes e pr otoc ol s allow remot e use rs to es tablish a secur e conn ectio n to th eir corp orate networ k.
A PPLI CATION S 1-6.
2-1 C HAPTER 2 I NSTALLATION Before i n stallin g the Barric ade ™ W irel ess Broadb and Rou ter , v erify that y ou have all t he it ems li sted unde r “ Pack age Con tents. ” If an y of t he it ems are mis sing or d amage d, co ntact you r loca l SMC dis tribut or .
I NSTA LLA TIO N 2-2 Plea se fi ll out an d ret urn the W arran ty Re gist ra tion C ard to SMC o r regist er on SMC ’ s W eb sit e at www.s mc.com. The Barricade W irele ss Broadb and Rout er is co vered by a limit ed lifeti me warranty .
I NSTALLATIO N 2-3 • Three RJ -45 po rts for co nne ctio n to a 10BASE -T/1 00BASE -TX Eth ernet Lo cal Ar ea Networ k (LAN). Thes e port s can auto - nego tiate th e op erati ng spe ed to 10/100 Mbps, the mo de to half /full dupl ex, and th e pin signal s to MDI/ MDI-X (i.
I NSTA LLA TIO N 2-4 The fo llow in g figu r e sho ws th e com pone nts of t he Wire less B arr icad e: Figure 2-1. Front and Rear Panels Item Description LEDs Power, WLAN, WAN and LAN port status indicators.
I NSTALLATIO N 2-5 System Require ments Y ou mus t have an Inter net Ser vice Pr ovide r (ISP) that m eets t he following minimu m require ments: • Int ernet ac cess from yo ur lo cal t elephon e comp any or ISP using an xDSL modem, Cable modem, ISDN TA, or PSTN analog modem.
I NSTA LLA TIO N 2-6 Connect the System The Wire less Barricade can be po siti oned at any co nvenie nt loc ation in you r offi ce o r home. No s pecial wirin g or c ooling requ irement s are need ed. Y ou shoul d, howe ver comply with the follo wing gui delines : • Keep the Wireless Barricade away from any heating devices.
I NSTALLATIO N 2-7 3. Connect your printer : Use stand ard paralle l pri nter cabl e to connec t your printer to the pr inter port on the Wireless Barricade.
I NSTA LLA TIO N 2-8 Warning: Do not plug a ph one ja ck conn ector in to any RJ-4 5 port. Th is m ay d amag e the Wi rele ss Barr ic ade. In st ead, use only t wiste d-pair cab les with RJ-4 5 conne ctors that con form with FCC s tanda rds. Notes: 1.
I NSTALLATIO N 2-9 Comp ut ers eq uipp ed wit h a wir ele ss ad apte r can com mu nica te with each other as an inde pe ndent wirel ess LAN by config urin g eac h comp ut er to th e sam e rad io ch ann el. How eve r , the Wirele ss Bar ricade c an pr ovide acce ss to your wired/ wirele ss LAN or to t he Int er net for all wire less wo rkstati ons.
I NSTA LLA TIO N 2-10 Attach the Wirel ess Barri cade to the Intern et If In tern et services are provi ded through an xDSL or Cable mod em, use uns hielde d or sh ielde d twis ted- pair Ethe r net cable (Cat eg ory 3 or gr ea ter) w ith RJ-4 5 pl ug s to co nne ct the br oadb and mode m direc tly to the W A N port o n the Wir ele ss Barri cade.
I NSTALLATIO N 2-11 Connecting the Power Adap ter Plug the po wer adapt er in to the power so cke t on the Wir e less Bar ricade, and t he other end int o a power outle t. Check the indi cator mark ed Po wer on t he f ront p anel t o be sure it i s on.
I NSTA LLA TIO N 2-12.
3-1 C HAPTER 3 C ONFI GURI NG C LIENT PC S TCP/IP C onfiguration T o acce ss th e I nter n et t hrou gh the Bar ricade ™ Wire less B ro adb an d Rou ter , you must config ure the n etwor k sett ings of th e comp uters on y our LAN to us e the same IP sub net as t he W ireles s Barr icad e.
P RINT E R C LIE NT I NSTALLATI ON 3-2 Printer Client Instal lation If you ne ed to provi de pr int se rvi ces for d evice s attac hed to th e W irele ss Ba rricad e, th en ins tall the Port Mo nitor prog ram fr om the CD (for W indo ws 95/98 /NT), and co nfigur e the prin t server on each network stati on.
4-1 C HAPTER 4 C ONFIGURING THE B ARRI CADE After y ou ha ve conf igur e d TCP/ IP on a cli ent comp ut er , yo u can use a W eb br owser to c onfi gure t he Barr icade ™ Wi r e l es s Broadb and Ro uter . The Wi reless B arricade can be config ured by any J ava-sup port ed brows er in cludi ng I nternet Exp lorer 4 .
N AVIGATI NG THE W EB B RO W S E R I NTE R FACE 4-2 Navigating the We b Brow ser Inter face The Wi reles s B arric ade ’ s man agement inte rface in clude s four key menus – Status, He lp, T ools, and Setup.
C ONFIGURI NG THE B ARRI CAD E 4-3 Main Menu Using the W eb managem ent i nterfac e, you can defi ne sy stem par ame ters , ma nage and c ontr ol t he W i reles s Ba rrica de a nd it s port s, or monit or n etwork c ondit ions. T he fol lowi ng tabl e bri efly des cribes the select ions available from this pro gram.
M AIN M ENU 4-4 Statu s M enu Displays connection status, ke y interface settings, as well as the firmware and har dware version numbers. INTERNET Displays WAN connection typ e and status. GATEWAY Displays system IP settings, the status for DHCP, and Firewall services, as w ell as the wireless interface settings.
C ONFIGURI NG THE B ARRI CAD E 4-5 Networking and Client Services Use th e Setup men u to co nf igur e the LAN inte r face (in clu ding TCP/ IP param eters fo r the Wire less Ba rricad e ’ s gatew a.
N ETWORKING AND C LIE NT S ERVI CE S 4-6 Change Password Use t his menu t o res trict m anagem ent acc ess b ase d on a specifi c passwor d. Y ou must enter a passwo rd to access the co nfigu ration opti ons p rovid ed by the menus. By de faul t, t here i s no pass word.
C ONFIGURI NG THE B ARRI CAD E 4-7 Set Time Zone Set the time zon e for th e Wireles s Barric ade. This infor mat ion is used for log entrie s and client filte ring. LAN Gateway and DHCP Settings Con fig ure th e g ate way ad dr ess of the Wir ele ss B a rricad e.
N ETWORKING AND C LIE NT S ERVI CE S 4-8 from 0 – 25 5, whi le t he l ast fiel d is th e h ost port ion an d c an be fr om 1 – 25 4. Howeve r , remember not to includ e the gat eway addr ess of the Wi reless Barr icade in the clie nt addre ss poo l.
C ONFIGURI NG THE B ARRI CAD E 4-9 Dynamic IP Address – DHCP The Host N ame is opt ional, but m ay be requi red b y som e ISP s. The d efault MAC addr es s is set to the W A N ’ s physica l interface on the Wi reless Barr icade. Use this address when r egistering for In ternet servi ce, and do not chan ge i t unles s requ ired by yo ur I SP .
N ETWORKING AND C LIE NT S ERVI CE S 4-10 Note: Yo u may nee d a f ixed add ress i f you want to p rovide Inte rnet se rvic es, su ch as a Web serve r or FTP serv er. PPP over Ether net – PPPoE Ent er the PPPoE user name and pas sword assi gned by yo ur ISP .
C ONFIGURI NG THE B ARRI CAD E 4-11 Dial-up on Demand – Modem If yo u are access ing the Inte rnet via an ISDN T A or PSTN modem attached to the seria l port on the Wireless Barricade, t hen you must specify your acc ount information on this screen as described below.
N ETWORKING AND C LIE NT S ERVI CE S 4-12 IP ad dres s for you to us e, ma rk “ Ye s ” for th is it em and enter the IP addr ess and subn et mask. Note: I f your I SP has g iven yo u a second ary ph one num ber, or if you have a seco ndary Inter net ser vice accou nt, then f ill in the relevant fiel ds under “ Second ary Dial-up.
C ONFIGURI NG THE B ARRI CAD E 4-13 Wireless Configuration T o configu re the W irele ss Barri cade as a wirele ss access point for wirel ess cl ients (either stati onary o r ro aming), al l you n eed to do is defin e the radio channel , the dom ain ide ntifie r , and enc rypti on opti ons.
N ETWORKING AND C LIE NT S ERVI CE S 4-14 Encryption If you ar e tran sm itti ng se nsitiv e da ta acro ss wir ele ss chann els, y ou shou ld e nabl e enc ry ption . En crypt io n re qui res yo u t o use the sa me set of e ncry ption /de crypt ion key s for the Wirele ss Barri cade and all o f yo ur wirel ess clien ts.
C ONFIGURI NG THE B ARRI CAD E 4-15 Y ou ca n auto matic ally g ener ate e ncrypt ion keys or you c an manu ally ent er th e keys. F or aut omati c 64-b it se curi ty , you en ter a pass phrase that is u sed to crea te fou r key s (as sh ow n bel ow).
N ETWORKING AND C LIE NT S ERVI CE S 4-16 Configuring Client Services The Wi reless Barr icade inc ludes a b roa d range of cl ient serv ices , inc luding f ire wall prot ection , net work ad dress trans lation, virt ual serve r , conne ction suppor t for special appli cations, and res tric ted Inte r net acce ss for sp ec ifie d clien ts.
C ONFIGURI NG THE B ARRI CAD E 4-17 Virtua l Server If yo u con figur e the Wi reless Barr icad e as a vir tual serv er , remote user s access in g serv ices suc h as W eb o r FTP at you r lo cal site via pub lic IP ad dresses can be automa tica lly re direc ted to local servers con figure d with p rivat e IP address es.
N ETWORKING AND C LIE NT S ERVI CE S 4-18 HTTP r eques t from outsid e user s wil l be trans ferre d to 19 2.168. 2.2. The refore, b y jus t en teri ng the IP A ddress pro vided by th e ISP , Int ernet user s ca n access the ser vice the y need at th e loc al addre ss to which you redirec t them.
C ONFIGURI NG THE B ARRI CAD E 4-19 Specify the port normally associated wi th an applicati on in the “ T rigge r Port ” fiel d, selec t the prot oco l type as TC P or UDP , then ente r th e p ublic po rts associ ated with the tri gg er p ort t o o pen the m for in bound traffi c.
N ETWORKING AND C LIE NT S ERVI CE S 4-20 MAC Filt ering Y ou c an fi lter In ternet acce ss fo r loca l wir ed and wireless cli ents bas ed on MA C add res s. MAC Addres s Contr ol: Eve ry c lie nt that conn ects to the net wor k has a uniqu e MA C (Medi a Acces s C ontrol) addres s on his or her Ethe r net a dap ter .
C ONFIGURI NG THE B ARRI CAD E 4-21 When a wire d client is allo wed t o “ Con nect ” to the Wirele ss Barricade, it mean s that it has fu ll access to the I nternet and net work re sourc es.
N ETWORKING AND C LIE NT S ERVI CE S 4-22 When a wireles s clie nt is NOT al lowed to “ Assoc iate ” to the wireless LAN, it means t hat it CANNOT : • Commu nicate with an y other s clie nts on .
C ONFIGURI NG THE B ARRI CAD E 4-23 Miscel laneous Setti ngs – Misc The Wi reless Barricade also all ows you set a timeou t for admi nistrat or ac cess, p reven t external PI NGs f rom caus ing securit y probl ems, set up remote manage ment, and co nfigur e a Vir tual DMZ Ho st .
N ETWORKING AND C LIE NT S ERVI CE S 4-24 Ente r the IP addr e ss of a D MZ host to th is scr een . Add ing a clie nt to the DMZ (D emilit arize d Zone) m ay expos e you r local netwo rk to a var iety o f secu rity ri sks, so only use t his opt ion as a last r eso rt.
C ONFIGURI NG THE B ARRI CAD E 4-25 Viewing Network and Device Status Y ou can us e the fol lowing screen t o display the connection status for the W AN/ WLAN/LA N interfaces, f irmware and hardware version numbe rs, any ille gal attemp ts to ac cess y our net work, as well as inform ation on all DHC P clien ts connec ted to your networ k.
U SING S YSTEM T OOLS 4-26 Using System Tools Y ou c an use the “ To o l s ” men u to reboo t the W ireless Bar rica de, rest or e fact or y sett ings , or upda te fir mwar e. Note: If you u se the R es et bu tton on the fron t pa nel , the Wire les s Barric ade pe rforms a po wer res et and re stor es the factory settin gs.
5-1 C HAPTER 5 C ONFI GURI NG C LI ENT TCP/IP If yo u ha ve not previ ously ins talled the TC P/IP proto col o n your cli ent P Cs, refe r to the foll owing s ecti on. If you n eed in formatio n on ho w to conf igur e a TCP/ IP add r ess on a PC, ref er to “ Se tting TCP/ IP to W o rk with the Ba rricad e ” on page 5 -3.
I NSTA LLIN G TCP/ IP P RO T O C O L IN Y OUR PC 5-2 5. Sele ct the Micr osoft ite m in the man ufactu rers list. And ch oos e TCP/IP in t he Netw or k Prot oc ols. Cl ic k th e OK b u tton to r etur n to th e Network wind ow. 6. The TC P/I P prot oc ol wi ll be l iste d in th e Netw ork wi ndow .
C ONFIGU RING C LIE NT TCP/IP 5-3 Setting TCP/IP to Work w ith the Barrica de 1. Cli ck th e Start button and c hoose Setti ngs , then clic k Cont r ol Panel . 2. Double cl ick the Netw ork ic on. Select t he TCP/IP lin e that has bee n assig ned to you r netwo rk card in th e Config uration tab of the Net w ork wi ndo w.
S ETTING TCP/ IP TO W ORK WITH THE B ARRICADE 5-4 Dynamic IP Allocation via a DHCP Server Select Obtain an I P addr ess automatically in the IP Ad dre ss tab. Do n ot in put any val ues u nder the Gateway tab, and ch oo se Disable DNS in the DNS Configuration tab.
C ONFIGU RING C LIE NT TCP/IP 5-5 Manual IP Configuration 1. Sele ct S pecify an IP addr e ss in th e IP Addr ess tab. Select an IP addre ss ba sed on the d efaul t ne twork 192.16 8.2.X (wh ere X is betwe en 1 and 254), and use 255.255.255 .0 for the subnet mask.
S ETTING TCP/ IP TO W ORK WITH THE B ARRICADE 5-6 4. After fini shi ng TCP/I P setu p, clic k OK , an d t he n re bo ot t he comp uter . After that, set up ot her PCs on the LAN accordi ng to the proce dures d escrib ed abov e.
C ONFIGU RING C LIE NT TCP/IP 5-7 If you ca n su cce ssful ly Pin g th e W irele ss Bar ric ade, t hen yo u are now re ady to conn ect to the In ter ne t!.
S ETTING TCP/ IP TO W ORK WITH THE B ARRICADE 5-8.
6-1 C HAPTER 6 C ONFIGURING P RINTER S ERVICES If you wa nt to u se th e prin t serv er b uilt into the W ireless Bar ricade, then you m ust firs t inst all t he Por t Mo nitor program as des crib ed in the foll owing sectio n for Windo ws 95/9 8/ME/N T/ 2000 .
I NSTAL L THE P RINT E R P ORT M ONIT OR 6-2 2. The next sc reen ind icate s th at the pr int cl ient us es TCP /IP netwo rk pr ot oc ol to mo nit or print requ es ts. Cl ick Nex t . 3. Select the de stin ation fol der and clic k on t he Next button. Th e setup pro gr am will then beg in to install th e pro grams into the dest in ati on f old er .
C ONFIGURING P RINT ER S ERVICES 6-3 4. Select the Pr ogram F olde r that will c ontai n the p rogram ic on for un insta lli ng the por t moni tor , an d then cl ick Next . 5. Enter th e pri nter po rt name that wi ll be u sed to id enti fy the port mo nitor in you r syst em, an d pr ess Ne xt .
C ONFIGUR E THE P RINT S ERVER 6-4 Config ure the Pr int Se rver The Wi reles s B arric ade ’ s p rint ser ver suppo rt s Mi cros oft Wind ows 95/ 98/ME/N T/200 0 and U nix.
C ONFIGURING P RINT ER S ERVICES 6-5 3. Specif y the p rinter ty pe attac hed to the Wir eless Bar ricad e. 4. Select the monito red p ort. T he de fault p ort nam e is “ SMC100 ” and th en cl ick the C onfigur e Port bu tto n.
C ONFIGUR E THE P RINT S ERVER 6-6 Configure the Network Printer in Windows NT 1. On a W indows NT p latform, op en t he Prin ters windo w in the My Computer menu, and d ouble-c lick the Add Prin ter icon. 2. Fol low th e prom pts t o add a local pri nter to you r sy stem.
C ONFIGURING P RINT ER S ERVICES 6-7 3. Selec t th e monito red port. T he def aul t port name is “ SMC1 00. ” Then cl ick the Configur e Port butt on. 4. Enter the IP addr ess of t he Wireles s Barri cade and click OK , and then cli ck Ne xt in the Add Prin ter W izar d dialog box.
C ONFIGUR E THE P RINT S ERVER 6-8 Configure the Network Printer in Unix Systems Fol low th e tradi t ional confi gurat ion proced ure on Uni x pl atforms to s et u p the Wire less B arric ade prin t se rver.
A-1 A PPENDIX A T ROUBLESHOOTING Thi s appen dix desc ribes comm on pro blems you may en coun ter and possi ble soluti ons. The Wirel ess Bar ricade can be easi ly mon itore d thro ugh pane l indicat ors to ident ify prob lems .
T R OU BLESHOOTI NG A-2 LED I ndi cato rs Link LED is Off • Ve rify that the Wireless Barricade and attac hed device are powered on. • Be sure the cable is plugged i nto both the Wireless Barricade and the co rresponding devi ce. • Verify that the proper cable typ e is used and its length does not exceed specif ied limits.
T R OUBLE SH OOT I NG A-3 Mobile users cannot access the Wireless Barricade • Make sure that the Wireless B arricade and all mobile users are configured to use the same radio channel, wireless domai n (SSID), and encr yptio n keys . • Ensure that all mobile users are within range of the Wireless Barricade as spec ified in Appendix C.
T R OU BLESHOOTI NG A-4.
B-1 A PPENDIX B C ABLES Ethernet Cable Specifications Twisted-pair Cable Caution: DO -NOT plug a phone ja ck conne ctor int o any RJ-45 port . Use only twis ted- pair cabl es with RJ- 45 c onnect ors that con form with FC C standards. For 10BASE-T/100BASE-TX connections, a twisted-pair cable must have t wo p airs of wires .
C ABLES B-2 Fig ure B-1 i llustr ate s how the pins on t he RJ -45 c onnec tor ar e numb er ed . Be su re to hold th e con nec to rs in th e sa me or ie nta tion when attach ing th e w ir es t o the pin s.
C AB LES B-3 RJ-45 Port Pin Assig nments All LAN ports on the Wir eless Bar ricad e suppo rt auto matic MDI/ MDI- X configur ation. Th is means th at the pin sig nals in use wi ll dep end on whet her the LAN port is op erat ing in M DI or MDI- X mode.
C ABLES B-4 Serial Port Pin Assignments The DB-9 s erial port on th e rear p anel i s used to c onnect the W irele ss Bar ricad e to an ISDN T A or PST N mode m. The pin assi gnment s use d to conne ct t o th is por t are p rovid ed in the follo wing t ables .
C AB LES B-5 Serial Port to 9-Pin COM Port on PC Serial Port to 25-Pin DCE Port on Modem Serial Port to 25-Pin DTE Port on PC Barricade ’ s 9-Pin Ser ial Po rt CCITT Signal PC ’ s 9-Pin CO M Por t.
C ABLES B-6 Printer Port Pi n Assignments The D B-25 paral lel por t on th e Wirele ss Barric ade ’ s rear panel is use d to co nnec t the Wirele ss Barric ade to a prin ter . When a prin ter is attach ed to thi s port , an y PCs attached to the Wireles s Barricade ’ s LAN por ts can pass files to th e printe r .
C-1 A PPENDIX C S PECIFICATIONS WA N I n t e r f a c e 10BA SE- T , 1 RJ-4 5 por t Seri al, 1 R S-232 DB-9 connec tor LAN Inter face 10BA SE-T/ 100BASE -TX 3 R J-45 por ts WLAN Inter face Standard: I EEE 802. 11b, D irect Sequence Spread Spectrum (DSSS) T r ans missi on Rate: 11 Mb ps, au tomati c fallba ck to 5 .
S PECI FI C ATION S C-2 Management W eb manageme nt Advanced Feat ur es Dynami c IP A ddre ss Conf igur ation – DHC P , DN S Firew all – Clien t priv ilege s, h acker prevent ion an d log ging, NA.
S PECIFI CATIONS C-3 Te m p e r a t u r e Operat ing 32 t o 10 4 ° F (0 to 40 ° C) Storag e -40 to 1 58 ° F (-40 to 70 ° C) Humidity 5% to 95% (nonc ondens ing) Compliances CE Ma rk Emis si ons FC.
S PECI FI C ATION S C-4.
D-1 A PPENDIX D O RDERING I NFORMATION Barricade Broadband Rou ter Products SMC7004ABR 4-port Residential Gateway - WAN/LAN/Print Server SMC7008ABR 8-port Residential Gateway - WAN/LAN/Print Server SM.
O RD ER IN G I NFOR MATION D-2.
.
6 Hugh es Irvine, CA 9261 8 Phone: (949) 707- 240 0 FOR TECHNICAL SUPPOR T , CALL: From U. S.A. and Ca nada (2 4 hou rs, 7 days a week ) (800) SMC- 4-YOU; (949) 707 -2400; (949) 707-2 460 (Fax) From Europe (8:00 AM - 5:30 PM UK Greenwich Mean T ime) 44 (0) 1188 748740; 44 (0) 11 89 74874 1 (Fax) INTERNET E-mail addresses: techsupp ort@ smc.
Ein wichtiger Punkt beim Kauf des Geräts SMC Networks Barricade SMC7004AWBR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SMC Networks Barricade SMC7004AWBR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SMC Networks Barricade SMC7004AWBR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SMC Networks Barricade SMC7004AWBR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SMC Networks Barricade SMC7004AWBR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SMC Networks Barricade SMC7004AWBR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SMC Networks Barricade SMC7004AWBR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SMC Networks Barricade SMC7004AWBR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SMC Networks Barricade SMC7004AWBR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
