Benutzeranleitung / Produktwartung STAREMATE REPLAY ST2 des Produzenten Sirius Satellite Radio
Zur Seite of 60
ST2 ST ARMA TE REPLA Y SIRIUS Satellite Radio Plug and Play User and Inst allation Guide.
ST2 Starmate Replay User and Installation Guide 2 Safety Precautions ........................................................... 4 FCC Warning .................................................................... 5 Cleaning the Receiver ...............
ST2 Starmate Replay User and Installation Guide 3 T able of Contents (continued) FM Preset Button ...................................................... 3 7 Menu Options ................................................................ 3 7 FM Transmitter .
ST2 Starmate Replay User and Installation Guide 4 • If the LCD display on the Receiver becomes damaged or broken, do not touch the liquid crystal fluid. The fluid can be dangerous to your health. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water .
ST2 Starmate Replay User and Installation Guide 5 FCC W arning This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide.
ST2 Starmate Replay User and Installation Guide 6 Package Contents MEMO MENU BAND DISP P. TUNE S-SEEK 1 2 3 4 5 6 7 8 9 0 001 Sirius Hits 1 001 Sirius Hits 1 U2 U2 Vertigo Vertigo POP 12:00P POP 12:00.
ST2 Starmate Replay User and Installation Guide 7 Installation Installation of your ST2 S tarmate Replay Receiver is easy: 1. Choose a location in your vehicle where you will mount the Receiver .
ST2 Starmate Replay User and Installation Guide 8 If you are using the velcro strip for mounting, attach the velcro strip to the back of the mounting plate. Route the cables through the mounting plate underneath the tabs as shown. The cables may be routed across the mounting plate, or routed down to exit at the bottom.
ST2 Starmate Replay User and Installation Guide 9 3. Place the suction cup mount on the windshield, or other area, and press the cam lever straight down towards the suction cup to flatten the suction cup as shown.
ST2 Starmate Replay User and Installation Guide 10 performance from the antenna. Sedan/Coupe : Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear window .
ST2 Starmate Replay User and Installation Guide 11 Route the cable from the lowest point of the rear window into the trunk. T ake advant age of any existing cable channels or wiring conduits. For SUVs, mini-vans & 5-door vehicles, bring the cable into the vehicle under the rubber molding for the tailgate, and continue under the interior trim.
ST2 Starmate Replay User and Installation Guide 12 Double check that the location of the antenna and rubber antenna cable cover/tail are correct, and continue to press firmly down on rubber antenna cable cover/tail for another 30 seconds. Note: At room temperature (68 degrees), maximum adhesion usually occurs within 72 hours.
ST2 Starmate Replay User and Installation Guide 13 channels until you activate your SIRIUS subscription. 184 News 12:00P A To Activate Call To Activate Call 1-888-539-SIRIUS 1-888-539-SIRIUS Preview 4.
ST2 Starmate Replay User and Installation Guide 14 001 Category 12:00P A Artist Name Artist Name Song Title Song Title Any Key to Continue Subscription Updated Channel Name T o continue, press any key on the Receiver .
ST2 Starmate Replay User and Installation Guide 15 Power Harness - for connecting the power for the Receiver to the vehicle’s electrical system. FM Switching Box - for connecting the FM output of the Receiver into the FM antenna input of your vehicle’s radio.
ST2 Starmate Replay User and Installation Guide 16 ST2 Starmate Replay Receiver Basic Operation MEMO MENU BAND DISP P . TUNE S-SEEK 1 2 3 4 5 6 7 8 9 0 001 Sirius Hits 1 001 Sirius Hits 1 U2 U2 Vertig.
ST2 Starmate Replay User and Installation Guide 17 1 . POWER Button : T urns the Receiver ’s power On and Off. 2. Rewind Button: Used to rewind through a broadcast saved in Inst ant Replay . 3. Play/Pause Button: Pause Function: Used to pause a broadcast for Inst ant Replay .
ST2 Starmate Replay User and Installation Guide 18 Remote Control 1 . Power Button : T urns the Receiver power On and Off. 2. Category Previous/Next Buttons: Navigates through categories. 3. MUTE Button: Mutes the audio. 4. Channel Up/Down Buttons: Navigates through channels and display screens.
ST2 Starmate Replay User and Installation Guide 19 which you are currently tuned. Category 001 Channel Name 001 Channel Name 002 Channel Name 003 Channel Name 003 Channel Name 004 Channel Name 004 Cha.
ST2 Starmate Replay User and Installation Guide 20 channel within a category and press the select button to tune to the highlighted channel. When a new channel is selected, the display will revert to the default display screen for the new channel.
ST2 Starmate Replay User and Installation Guide 21 Advanced Features Channel Presets (BAND) Y ou can store up to 30 of your favorite channels as pre sets for qui ck recall access. The pres et channels are stored in 3 bands , A, B, and C, each containing 10 channel presets, and are numbered 0 to 9.
ST2 Starmate Replay User and Installation Guide 22 preset button in which you wish to store your favorite channel, until you hear a beep. The band and preset number will then be displayed in the lower right corner of the display screen to confirm that the channel has been stored.
ST2 Starmate Replay User and Installation Guide 23 presets are grouped and displayed by bank and preset number , i.e., A-1, A-2...B-1, B-2, etc. Empty presets are not displayed.
ST2 Starmate Replay User and Installation Guide 24 If you have saved a sports team (or teams) in memory , at the time Receiver is initially powered on, you will be alerted if your sports teams are playing in a game being broadcast. Also, while listening to your SIRIUS receiver , should one of your teams begin to play a game, you will be alerted.
ST2 Starmate Replay User and Installation Guide 25 2 . For Sports Games: If the current tuned channel is an NFL, NBA, NHL, or College play-by-play sports broadcast, momentarily press and release the MEMO button. The Receiver will display a menu to choose which sports team should be saved to memory .
ST2 Starmate Replay User and Installation Guide 26 3 . T o ensure that no duplicate entries are stored in memory , the Receiver will check the stored memory list to ensure that the alert about to be stored is not already stored in memory . If a duplicate entry is found, an “Unable to S tore” screen will be displayed for 1 second.
ST2 Starmate Replay User and Installation Guide 27 displayed. Replace Artist Name/ Song Tit Artist Name/ Song Tit Artist Name Sports Team Sports Team Artist Name/ Song Tit Artist Name/ Song Tit X/Y Using the channel up and down buttons, highlight the alert that you would like to overwrite and press the select button to store the new alert.
ST2 Starmate Replay User and Installation Guide 28 select button. 3 . A screen displaying “Delete”, “Seek On”, and “Seek Off” will be displayed. Memory Recall Delete Seek Off Seek Off Seek On Seek On 4 . Use the channel up and down buttons to highlight the “Delete” option, and press the select button.
ST2 Starmate Replay User and Installation Guide 29 3 . T o enable S-Seek alert s, use the channel up and down buttons to highlight the “Seek On” option and press the select button.
ST2 Starmate Replay User and Installation Guide 30 news channel, a sports channel, or any channel at all. Pressing the Jump button allows you to quickly tune to the specific channel you have programmed into the Jump button, and then tune back to the original channel by pressing the Jump button again.
ST2 Starmate Replay User and Installation Guide 31 Game Alert The Receiver has a feature called Game Alert which can automatically alert you when your favorite sports team is playing a game.
ST2 Starmate Replay User and Installation Guide 32 Pressing and holding the Play/Pause button changes the display to a listing of the artist’s names in the stored audio, from the most recent to the oldest, beginning with an entry called “Live”.
ST2 Starmate Replay User and Installation Guide 33 program in the stored audio, and playback automatically begins. Repeatedly pressing and releasing the Rewind Button causes the Receiver to continue to move backwards in the stored audio to the start of each previous song or program until the beginning of the stored audio is reached.
ST2 Starmate Replay User and Installation Guide 34 describing the Rewind and Fast-Forward buttons for specific instructions for their use. Note: If the Receiver is tuned to another channel while in th.
ST2 Starmate Replay User and Installation Guide 35 been used, the bar will be completely filled. Artist Name Artist Name Song Title Song Title Progress Bar Showing Amount of Memory Filled 001 Ch.
ST2 Starmate Replay User and Installation Guide 36 stored at the same rate at which you are playing back the stored audio. Y ou can use the Fast- Forward button to skip ahead or exit the Instant Replay mode, and begin listening to the live broadcast again.
ST2 Starmate Replay User and Installation Guide 37 FM Preset Button The Receiver has a special button called the FM Preset button, which is identified by the icon. When the FM Preset button is pressed, the Receiver turns on the built-in FM transmitter and begins transmitting on the next frequency from the FM frequency preset list.
ST2 Starmate Replay User and Installation Guide 38 Menu Options FM Transmitter Game Alert Game Alert Settings Settings Time Based Features Time Based Features T o select a menu option, use the channel up and down buttons to highlight the option you wish to adjust, and press the select button.
ST2 Starmate Replay User and Installation Guide 39 <EMPTY> <EMPTY> 88.3 MHz 88.7 MHz 88.7 MHz 88.5 MHz 88.5 MHz 88.1 MHz 88.1 MHz 3 . Use your FM radio to locate quiet FM frequencies where there is no interference from adjacent FM stations.
ST2 Starmate Replay User and Installation Guide 40 by using the Memory ( MEMO ) function. (See the section titled, Memory (MEMO) and Song Seek (S- Seek) Functions for more information about adding additional teams.) T o choose sports teams to add for game alert s, do the following: 1 .
ST2 Starmate Replay User and Installation Guide 41 Settings Jump Setting Display Options Display Options Memory Options Memory Options Auto Select Auto Select T o select a menu option, use the channel up and down buttons to highlight the option you wish to adjust, and press the select button.
ST2 Starmate Replay User and Installation Guide 42 T o exit the Jump Settings menu, press the MENU button. JumpSet T o set the Jump button to a specific channel (other than a traffic channel) when pressed, do the following: 1 . Use the channel up and down buttons to highlight the “JumpSet” option, and press the select button.
ST2 Starmate Replay User and Installation Guide 43 Brightness adjusts the overall intensity of the LCD display to help with viewing in different lighting conditions. Contrast adjusts the relationship between the background and the text on the LCD display .
ST2 Starmate Replay User and Installation Guide 44 and down buttons to highlight “Y es”, and press the select button. Clear All Memory? Yes Yes No The S-Seek memory is now erased.
ST2 Starmate Replay User and Installation Guide 45 Confirmation T one The Receiver will sound an audio tone alert when it is powered On or Off, as well as when an S-Seek alert is activated and other alerts.
ST2 Starmate Replay User and Installation Guide 46 will have the word “Lock” displayed to the right of the channel name . 001 Channel Name 001 Channel Name 002 Channel Name 003 Channel Name Lock 003 Channel Name Lock 004 Channel Name 004 Channel Name Lock/Unlock 5.
ST2 Starmate Replay User and Installation Guide 47 Enter Code # ____ # ____ If you should exit this prompt without entering a code, you will be prompted to set a code the next time you enter the Edit Code option. T o change the Parental Control code, do the following: 1.
ST2 Starmate Replay User and Installation Guide 48 Confirm Code Wrong Code Confirm Code Code Saved T o exit the Parent al Control menu, press the MENU button.
ST2 Starmate Replay User and Installation Guide 49 Format T o change the clock display format of the Receiver to 12 hour or 24 hour format, do the following: 1 . Use the channel up and down buttons to highlight “Clock” and press the select button.
ST2 Starmate Replay User and Installation Guide 50 Alarm This feature allows you to set an alarm to sound at a specific time each day , and to turn the alarm feature On or Off. Alarm Set Alarm Alarm Time Alarm Time Set Alarm T o turn the alarm On or Off, do the following: 1 .
ST2 Starmate Replay User and Installation Guide 51 on in order for this feature to function. Program Alert Program Time/Day Channel Number Channel Number Program Alert On/Off Program Alert On/Off Program Time/Day T o program the time and day when the receiver will tune to the specified channel, do the following: 1 .
ST2 Starmate Replay User and Installation Guide 52 Channel Number T o set the channel to which the receiver will tune when the Program Alert feature is On, do the following: 1 . Use the channel up and down buttons to highlight “Channel Number”, and press the select button.
ST2 Starmate Replay User and Installation Guide 53 button. If the Auto Shut down is not reset, the Receiver will automatically power off. 001 Artist Name Artist Name Song Title Song Title Category 12:00P A Cancel Auto Shutdown Channel Name T o enable or disable the Auto Shutdown feature, do the following: 1 .
ST2 Starmate Replay User and Installation Guide 54 transmitters. T o display the Signal Indicator screen, do the following: 1 . Use channel up and down buttons to highlight “Signal Indicator”, and press the select button. Signal Indicator SAT - + SAT - + TER - + TER - + 2 .
ST2 Starmate Replay User and Installation Guide 55 the features of the Receiver to the factory defaults, do the following: 1. Use the channel up and down buttons to highlight “Factory Default”, and press the select button.
ST2 Starmate Replay User and Installation Guide 56 Receiver does not power on Receiver displays: “ANTENNA NOT DET ECTED” Audio static or loss of clarity Receiver displays: “ACQUIRING SIGNAL” No sound Blown fuse, or the power cable is not properly connected.
ST2 Starmate Replay User and Installation Guide 57 Specifications Satellite Frequencies ............................................................................................. 2322.293/2330.207 MHz T errestrial Frequencies ......................
ST2 Starmate Replay User and Installation Guide 58 12 MONTH LIMITED W ARRANTY SIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product that should this.
ST2 Starmate Replay User and Installation Guide 59 SIRIUS ID: Please record the SIRIUS ID (SID) in the space provided below: SIRIUS Customer Service: 1-888-539-7474 SIRIUS Product Support: 1-800-869-5590 customercare@sirius-radio.
ST2 (082406a) SIRIUS Satellite Radio Inc. 1221 A venue of the Americas New Y ork, NY 10020 1-888-539-7474 ww w .sirius.com.
Ein wichtiger Punkt beim Kauf des Geräts Sirius Satellite Radio STAREMATE REPLAY ST2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sirius Satellite Radio STAREMATE REPLAY ST2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sirius Satellite Radio STAREMATE REPLAY ST2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sirius Satellite Radio STAREMATE REPLAY ST2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sirius Satellite Radio STAREMATE REPLAY ST2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sirius Satellite Radio STAREMATE REPLAY ST2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sirius Satellite Radio STAREMATE REPLAY ST2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sirius Satellite Radio STAREMATE REPLAY ST2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sirius Satellite Radio STAREMATE REPLAY ST2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
