Benutzeranleitung / Produktwartung SIR-GTRC1 STREAMER GTR des Produzenten Sirius Satellite Radio
Zur Seite of 60
SIR-GTRC1 STREAMER GTR SIRIUS Satellite Radio Plug and Play User and Installation Guide.
SIR-GTRC1 Streamer GTR User and Installation Guide 2 Safety Precautions ............................................................4 FCC W arning ..................................................................... 5 Cleaning the Receiver ..........
SIR-GTRC1 Streamer GTR User and Installation Guide 3 T able of Contents (continued) © 2005 SIRIUS Satellite Radio Inc. ® “SIRIUS,” the SIRIUS dog logo, channel names and logos are trademarks of Sirius Satellite Radio Inc.
SIR-GTRC1 Streamer GTR User and Installation Guide 4 damaged or broken, do not touch the liquid crystal fluid. The fluid can be dangerous to your health. If the liquid crystal fluid contacts your body or clothing, immediately wash it off with soap and water .
SIR-GTRC1 Streamer GTR User and Installation Guide 5 FCC W arning This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide.
SIR-GTRC1 Streamer GTR User and Installation Guide 6 Package Contents MEMO MENU BAND DISP P. TUNE S-SEEK 1 2 3 4 5 6 7 8 9 0 001 Sirius Hits 1 001 Sirius Hits 1 U2 U2 Vertigo Vertigo POP 12:00P POP 12.
SIR-GTRC1 Streamer GTR User and Installation Guide 7 Installation Installation of your SIR-GTRC1 Streamer GTR Receiver is easy: 1. Choose a location in your vehicle where you will mount the Receiver .
SIR-GTRC1 Streamer GTR User and Installation Guide 8 Be sure the large tab on the mounting plate is facing up. If you are using the velcro strip for mounting, attach the velcro strip to the back of the mounting plate. Route the cables through the mounting plate underneath the tabs as shown.
SIR-GTRC1 Streamer GTR User and Installation Guide 9 1. Clean the area where you are attaching the suction cup with an alcohol wipe. 2. Lift up the cam lever on the suction cup mount as shown.
SIR-GTRC1 Streamer GTR User and Installation Guide 10 Sedan/Coupe : Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear window . SUV/Mini-V an: Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear door/hatch.
SIR-GTRC1 Streamer GTR User and Installation Guide 1 1 Once the antenna cable is routed through the vehicle, and you are satisfied with the cable routing, peel the yellow protective material from the adhesive strip and adhere the adhesive strip to the rubber antenna cover/tail.
SIR-GTRC1 Streamer GTR User and Installation Guide 12 Double check that the location of the antenna and rubber antenna cable cover/tail are correct, and continue to press firmly down on rubber antenna cable cover/tail for another 30 seconds. Note: At room temperature (68 degrees), maximum adhesion usually occurs within 72 hours.
SIR-GTRC1 Streamer GTR User and Installation Guide 13 Y ou will not be able to tune to any other channels until you activate your SIRIUS subscription. 4. T o listen to the audio from your Receiver , you will need to tune the FM radio in your vehicle and the FM transmitter in the Receiver to the same FM frequency .
SIR-GTRC1 Streamer GTR User and Installation Guide 14 001 Category 12:00P A Artist Name Artist Name Song Title Song Title Any Key to Continue Subscription Updated Channel Name The installation of your.
SIR-GTRC1 Streamer GTR User and Installation Guide 15 FM Switching Box - for connecting the FM output of the Receiver into the FM antenna input of your vehicle’s radio. This box will automatically switch off the vehicle’ s FM antenna when you turn on your SIRIUS Receiver .
SIR-GTRC1 Streamer GTR User and Installation Guide 16 SIR-GTRC1 Streamer GTR Receiver Basic Operation MEMO MENU BAND DISP P . TUNE S-SEEK 1 2 3 4 5 6 7 8 9 0 001 Sirius Hits 1 001 Sirius Hits 1 U2 U2 .
SIR-GTRC1 Streamer GTR User and Installation Guide 17 1. POWER Button : T urns the Receiver ’ s power On and Off. 2. Rewind Button: Used to rewind through a broadcast saved in Instant Replay . 3. Play/Pause Button: Pause Function: Used to pause a broadcast for Instant Replay .
SIR-GTRC1 Streamer GTR User and Installation Guide 18 Remote Control 1. Power Button : T urns the Receiver power On and Off. 2. Category Previous/Next Buttons: Navigates through categories. 3. MUTE Button: Mutes the audio. 4. Channel Up/Down Buttons: Navigates through channels and display screens.
SIR-GTRC1 Streamer GTR User and Installation Guide 19 which you are currently tuned. Category 001 Channel Name 001 Channel Name 002 Channel Name 003 Channel Name 003 Channel Name 004 Channel Name 004 .
SIR-GTRC1 Streamer GTR User and Installation Guide 20 When a new channel is selected, the display will revert to the default display screen for the new channel. T o exit the channel list mode without changing to a different channel, press and hold the DISP button for 1½ seconds, until the default screen is displayed.
SIR-GTRC1 Streamer GTR User and Installation Guide 21 Advanced Features Channel Presets (BAND) You can s tore up to 30 of your favorite channels as presets for quick recall access. The preset channels are stored in 3 bands, A, B, and C, each containing 10 channel presets, and are numbered 0 to 9.
SIR-GTRC1 Streamer GTR User and Installation Guide 22 preset button in which you wish to store your favorite channel, until you hear a beep. The band and preset number will then be displayed in the lower right corner of the display screen to confirm that the channel has been stored.
SIR-GTRC1 Streamer GTR User and Installation Guide 23 3. T o view the channel presets in the channel list mode, where you can view 4 presets at once, momentarily press and hold the DISP button for approximately one second until the channel list mode is displayed.
SIR-GTRC1 Streamer GTR User and Installation Guide 24 of your teams begin to play a game, you will be alerted. 001 Artist Name Artist Name Song Title Song Title Category 12:00P A Game Alert Channel Na.
SIR-GTRC1 Streamer GTR User and Installation Guide 25 team should be saved to memory . 100 Category 12:00P A Artist Name Artist Name Song Title Song Title Store DAL? Store NYG? Store NYG? Channel Name If either of the teams is not available to save, that team will be displayed as unavailable.
SIR-GTRC1 Streamer GTR User and Installation Guide 26 001 Category 12:00P Artist N Artist N Unable to Store A Channel Name The Receiver will then revert to the last active display mode.
SIR-GTRC1 Streamer GTR User and Installation Guide 27 the new alert. If the new alert was successfully saved in memory , a “ Artist/Song/Game Stored ” pop-up screen followed by an X Used/Y Empty screen will be displayed for 1 and 2 seconds respectively .
SIR-GTRC1 Streamer GTR User and Installation Guide 28 highlight the “Delete” option, and press the select button. A delete confirmation screen will appear . Delete Yes No No T o permanently delete the alert from the memory list, highlight “Y es” using the channel up and down buttons and press the select button to confirm.
SIR-GTRC1 Streamer GTR User and Installation Guide 29 upon which type of a match was found. An audible beep tone will also be heard indicating that a match was found.
SIR-GTRC1 Streamer GTR User and Installation Guide 30 a Jump search is active. The search process may take up to 4 minutes until the city’s traffic report found. The Receiver will automatically tune to the traffic report channel when the traffic report is found.
SIR-GTRC1 Streamer GTR User and Installation Guide 31 to highlight your favorite sports team in the list, and then press the select button to tune to the channel where the game is being broadcast. Refer to the Game Alert section in the Menu Options section of this manual for instructions on programming your favorite sports teams into the Receiver .
SIR-GTRC1 Streamer GTR User and Installation Guide 32 REPLAY LIST Live Live Artist Artist Artist Artist Artist REPLAY LIST Live Live Song Title Song Title Song Title Song Title Song Title • Fast Forward button. The fast forward button forwards you through the stored audio.
SIR-GTRC1 Streamer GTR User and Installation Guide 33 of a song or program may not be available in memory . If this occurs, the playback will start from where the audio began to be stored.
SIR-GTRC1 Streamer GTR User and Installation Guide 34 The Instant Replay mode icon that is displayed at the bottom left of the screen indicates the current mode. Pause mode . This indicates that the Receiver is paused and muted. Play mode. This indicates that you are in the Instant Replay playback mode, listening to stored audio.
SIR-GTRC1 Streamer GTR User and Installation Guide 35 Artist Name Artist Name Song Title Song Title Progress Bar Showing Amount of Memory Filled 001 Ch.
SIR-GTRC1 Streamer GTR User and Installation Guide 36 being stored at the same rate at which you are playing back the stored audio. Y ou can use the Fast-Forward button to skip ahead or exit the Instant Replay mode, and begin listening to the live broadcast again.
SIR-GTRC1 Streamer GTR User and Installation Guide 37 FM Preset Button The Receiver has a special button called the FM Preset button, which is identified by the icon. When the FM Preset button is pressed, the Receiver turns on the built-in FM transmitter and begins transmitting on the next frequency from the FM frequency preset list.
SIR-GTRC1 Streamer GTR User and Installation Guide 38 down buttons to highlight the option you wish to adjust, and press the select button. If a selection is not made within 10 seconds, the Receiver will exit the menu options screen, and revert to the last active display mode.
SIR-GTRC1 Streamer GTR User and Installation Guide 39 frequencies where there is no interference from adjacent FM stations. These are the frequencies which should be added to the FM Presets list. 4. Using the channel up and down buttons, highlight the frequency you wish to select for the preset and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 40 T o choose sports teams to add for game alerts, do the following: 1. Use the channel up and down buttons to highlight “Game Alert” and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 41 T o select a menu option, use the channel up and down buttons to highlight the option you wish to adjust, and press the select button. Jump Settings The Jump setting controls the actions of the Jump button.
SIR-GTRC1 Streamer GTR User and Installation Guide 42 JumpSet T o set the Jump button to a specific channel (other than a traffic channel) when pressed, do the following: 1. Use the channel up and down buttons to highlight the “JumpSet” option, and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 43 - + - + Brightness - + - + Contrast T o exit the Brightness/Contrast screen, press the MENU button.
SIR-GTRC1 Streamer GTR User and Installation Guide 44 Auto Select Auto Select chooses whether th e Receiver immediately tunes to a c hannel when a channel is highlighted, or whether you must first press the select button in order to tune to a highlighted channel in any of the list modes.
SIR-GTRC1 Streamer GTR User and Installation Guide 45 Confirmation T one The Receiver will sound an audio tone alert when it is powered On or Off, as well as when an S- Seek alert is activated and other alerts.
SIR-GTRC1 Streamer GTR User and Installation Guide 46 001 Channel Name 001 Channel Name 002 Channel Name 003 Channel Name Lock 003 Channel Name Lock 004 Channel Name 004 Channel Name Lock/Unlock 5. T o lock or unlock a channels, use the channel up and down buttons to highlight a channel, and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 47 Enter Code # ____ # ____ If you should exit this prompt without entering a code, you will be prompted to set a code the next time you enter the Edit Code option. T o change the Parental Control code, do the following: 1.
SIR-GTRC1 Streamer GTR User and Installation Guide 48 Confirm Code Wrong Code Confirm Code Code Saved T o exit the Parental Control menu, press the MENU button.
SIR-GTRC1 Streamer GTR User and Installation Guide 49 Format T o change the clock display format of the Receiver to 12 hour or 24 hour format, do the following: 1. Use the channel up and down buttons to highlight “Clock” and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 50 Alarm This feature allows you to set an alarm to sound at a specific time each day , and to turn the alarm feature On or Off. Alarm Set Alarm Alarm Time Alarm Time Set Alarm T o turn the alarm On or Of f, do the following: 1.
SIR-GTRC1 Streamer GTR User and Installation Guide 51 powered on in order for this feature to function. Program Alert Program Time/Day Channel Number Channel Number Program Alert On/Off Program Alert On/Off Program Time/Day T o program the time and day when the receiver will tune to the specified channel, do the following: 1.
SIR-GTRC1 Streamer GTR User and Installation Guide 52 Channel Number T o set the channel to which the receiver will tune when the Program Alert feature is On, do the following: 1. Use the channel up and down buttons to highlight “Channel Number”, and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 53 001 Artist Name Artist Name Song Title Song Title Category 12:00P A Cancel Auto Shutdown Channel Name T o enable or disable the Auto Shutdown feature, do the following: 1. Use the channel up and down buttons to highlight “Auto Shutdown”, and press the select button.
SIR-GTRC1 Streamer GTR User and Installation Guide 54 “Signal Indicator”, and press the select button. Signal Indicator SAT - + SAT - + TER - + TER - + 2. T wo 10 segment horizontal bar graphs will be displayed with a - sign to the left and a + sign to the right.
SIR-GTRC1 Streamer GTR User and Installation Guide 55 2. Use the channel up and down buttons to select “Y es” to restore all settings to the settings from the factory , or select “No” to leave them as-is and return to the Menu Options menu. Restore Settings? Yes Yes No 3.
SIR-GTRC1 Streamer GTR User and Installation Guide 56 Receiver does not power on Receiver displays: “ANTENNA NOT DET ECTED” Audio static or loss of clarity Receiver displays: “ACQUIRING SIGNAL” No sound Blown fuse, or the power cable is not properly connected.
SIR-GTRC1 Streamer GTR User and Installation Guide 57 Specifications Satellite Frequencies ............................................................................................ 2322.293/2330.207 MHz T errestrial Frequencies ...................
SIR-GTRC1 Streamer GTR User and Installation Guide 58 12 MONTH LIMITED W ARRANTY Brix Labs dba Pana-Pacific/American Wireless (the “Company”) warrants to the original retail purchaser of this pro.
SIR-GTRC1 Streamer GTR User and Installation Guide 59 S I R I U S I D : Please record the SIRIUS ID (SID) in the space provided below: W arranty Support: 1-800-848-6560 T echnical Support: 1-866-253-7.
© 2005 Brix Labs Brix Labs 541 Division Street Campbell, CA 95008 (866) 253-7027 SIR-GTRC1 (Rev . 1, Aug 2005).
Ein wichtiger Punkt beim Kauf des Geräts Sirius Satellite Radio SIR-GTRC1 STREAMER GTR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sirius Satellite Radio SIR-GTRC1 STREAMER GTR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sirius Satellite Radio SIR-GTRC1 STREAMER GTR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sirius Satellite Radio SIR-GTRC1 STREAMER GTR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sirius Satellite Radio SIR-GTRC1 STREAMER GTR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sirius Satellite Radio SIR-GTRC1 STREAMER GTR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sirius Satellite Radio SIR-GTRC1 STREAMER GTR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sirius Satellite Radio SIR-GTRC1 STREAMER GTR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sirius Satellite Radio SIR-GTRC1 STREAMER GTR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
