Benutzeranleitung / Produktwartung WJ-NT304 des Produzenten Panasonic
Zur Seite of 20
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. LINK RCV SND OPERATE Network Interface Unit WJ-NT304 Network Interface Unit Operating Instructions Model No.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE- FULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amp and that it is approved by ASTA or BSI to BS1362.
3 The serial number of this product may be found on the sur- face of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
4 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5 Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR- TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
6 Preface Features Network Interface Unit WJ-NT304 is designed to capture images from analog cameras and compress the images in JPEG or MPEG-4 files. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network.
7 There are 2 sets of operating instructions for the WJ-NT304 as follows. • Installation Guide (book, these operating instructions) • Network operating instructions (PDF) The "Installation Guide" contains descriptions of how to install and connect this unit, and how perform the required network se t- tings.
8 As you will use this product connected to a network, your attention is called to the following security risks. 1. Leakage or theft of information through this product 2.
9 CONTENTS Important Safety Instructions ................................................................................................. ..................... 4 Limitation of Liability ................................................................
10 Precautions • Do not block the ventilation opening or slots on the cover. To prevent the apparatus from overheating, place it at least 5 cm {2 inches} away from the wall. • Do not drop metallic parts through slots. This could permanently damage the apparatus.
11 MPEG-4 Visual patent portfolio license This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in comp.
12 Major Operating Controls and Their Functions LINK RCV SND OPERA TE Network Interface Unit WJ-NT304 WJ-NT304 w q F ront cover e u y r t q Operation Indicator (OPERATE) This LED will light when the power is on. Important: • The LED will blink for around 2 minutes until the unit becomes ready to operate.
q Video input connectors 1 to 4 (VIDEO IN 1 to 4) (BNC, 75 Ω , with auto termination) These connectors accept video input signals from cam- eras or recorders. w Video output connectors 1 to 4 (VIDEO OUT 1 to 4) (BNC, loop-thru) These connectors loop thru video input signals sup- plied to VIDEO IN connectors 1 to 4.
14 Rack Mounting Remov e the rubber feet. z Remove the rubber feet (4 pcs.) on the bottom of the unit. x Install the rack mounting brackets (Option: Refer to the following.) on both sides of the unit. Using the mounting screws (4 pcs.) for the rack mounting brackets, fix them firmly.
■ When connecting to a network using a PoE device (hub) <Required cable> LAN cable (category 5 or better, straight) ■ When connecting with a PC directly <Required cable> LAN cable (category 5 or better, cross) Important: • Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
c Insert an SD memory card into the SD memory card slot. v Attach the cover and tighten the screw. b Close the front cover. 16 z Open the front cover. x Detach the SD memory card slot cover by loosening the screw.
17 Configure the Network Settings ■ Install the software Before installing the software, read the readme file on the provided CD-ROM first. ● Software included on the provided CD-ROM • Panasonic IP Setup Software Configure the network settings of the unit.
Check if the DC plug of AC adapter is properly inserted into the DC IN jack of this monitor. Check if the power cord is properly inserted into the AC adapter.
19 Specifications ■ Network Interface Unit Power source: 12 V DC, 1.0 A (using the supplied AC adapter) Power consumption: Approx. 12 W Ambient temperature: –10 °C to +50 °C {14 °F to 122 °F}*.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic WJ-NT304 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic WJ-NT304 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic WJ-NT304 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic WJ-NT304 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic WJ-NT304 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic WJ-NT304 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic WJ-NT304 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic WJ-NT304. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic WJ-NT304 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
