Benutzeranleitung / Produktwartung RP614v4 des Produzenten NETGEAR
Zur Seite of 68
202-10167-01 2006-03 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA RP614v4 Cable/DSL Router Reference Manual.
ii v3.0, 2006-03 © 2006 by NETGEAR, Inc. Al l rights reserved. 2006-03. T rademarks NETGEAR is a trademark of Netge ar , Inc. Microsoft, W indows, and W indow s NT are registered trademar ks of Microsoft Corporation. Other brand and product names are registered tradem arks or trad emarks of their respective holders.
v3.0, 2006-03 iii in accordance with the regulations may , however , be subject to certain restrict ions. Please refer to the notes in the operating instructions.
v3.0, 2006-03 iv.
v v3.0, 2006-03 Content s RP614v4 Cable/DSL Router Reference Manual About This Manual Audience, Scope, Conventions, and Formats . ......... ................. ................ ............. .......... ix How to Use This Manual ................. .......
vi v3.0, 2006 -03 Erasing the Configuration ... ................ ................ ................. ................ ................ ..... 3-7 Upgrading the Router Software .................... ............ ................. ................ ........
vii v3.0, 2006-03 Restoring the Default Configur ation and Password ...... ... ... ... .... ... ... ... .... ... ... ... ... .... ... ... .. 5-7 Problems with Date and T ime ... ................ .................... ................ ................ .
viii v3.0, 2006 -03.
ix v3.0, 2006-03 About This Manual This section describes the intended audience, sc ope, conventions, and formats of this manual. Audience, Scope, Conventions, and Format s This reference manual assumes that the reader h as basic to interme diate computer and Internet skills.
Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. RP614v4 Cable/DSL Router Reference Ma nual x v3.0, 2006 -03 This manual is written for the RP614v4 router according to these specifications: Ta b l e 2.
RP614v4 Cable/DSL Router Reference Manu al xi v3.0, 2006-03 Each page in the HTML versi on of the manu al is dedicated to a major topic. Use the Print button on the brows er toolbar to print the page contents. • Printing a Chapter . Use the PDF of This Chapter link at the top left of any page.
RP614v4 Cable/DSL Router Reference Ma nual xii v3.0, 2006 -03.
1-1 v3.0, 2006-03 Chapter 1 Introduction This chapter lists the package contents for the RP614 v4 Cable/DSL Router, describes the front and rear panel layouts, and describ es your N ETGEAR main tenance and support be nefits. Package Content s The product package should contain the following it ems: • RP614v4 Cabl e/ DS L Router.
RP614v4 Cable/DSL Router Reference Ma nual 1-2 Introduction v3.0, 2006 -03 The Router ’ s Front Panel The front panel of th e RP614v4 router contains th e status lights described bel ow . 4 1 2 3 Figure 1- 1 Y ou can use the status lights to verify connection s.
RP614v4 Cable/DSL Router Reference Manu al Introduction 1-3 v3.0, 2006-03 The Router ’ s Rear Panel The rear panel of the RP614v4 Cable/DSL Router contain s these connections.
RP614v4 Cable/DSL Router Reference Ma nual 1-4 Introduction v3.0, 2006 -03 Maintenance and Support NETGEAR offers the following features to help you maximize your use of the RP61 4v4 router: • Flash memory for firmware upgrades • Free technical support seven days a week, twenty-four hours a day S panish http://documentation/netgear .
2-1 v3.0, 2006-03 Chapter 2 Content Filtering This chapter describes ho w to us e the content filtering features of the RP614v4 Cable/DSL Router to protect your network. These fe atures can be foun d by clickin g on the Content Filtering heading in the Main Menu of the browser interface.
RP614v4 Cable/DSL Router Reference Ma nual 2-2 Content Filtering v3.0, 2006 -03 Blocking Access to Internet Sites The RP614v4 router allows you to restrict access based on W eb addresses and W eb address keywords. Up to 255 entries are supported in the Keyword list.
RP614v4 Cable/DSL Router Reference Manu al Content Filtering 2-3 v3.0, 2006-03 Keyword application examples: • If the keyword “XXX” is specified, the URL <http://www .badstuff.com/xxx.html> is blocked. • If the keyword “.com” is specified, only W eb s ites with other domain suffixes (such as .
RP614v4 Cable/DSL Router Reference Ma nual 2-4 Content Filtering v3.0, 2006 -03 Services are functions performed by server computers at the request of client computers. For example, W eb servers serve W eb pa ges, time serve rs serve time and date information, and game hosts serve data about other players’ moves.
RP614v4 Cable/DSL Router Reference Manu al Content Filtering 2-5 v3.0, 2006-03 Configuring a User Defined Service T o define a service, first you must determine whic h port number or range of numb ers is used by the application.
RP614v4 Cable/DSL Router Reference Ma nual 2-6 Content Filtering v3.0, 2006 -03 Scheduling When Blocking Will Be Enforced The RP614v4 router allows you to specify when blocking will be enforced. The Schedule menu is shown below: Figure 2-4 Use this schedule for blocking content.
RP614v4 Cable/DSL Router Reference Manu al Content Filtering 2-7 v3.0, 2006-03 V iewing Logs of W eb Access or Attempted W eb Access The log is a detailed record of what W eb sites yo u have accessed or attempted to acces s. Up to 128 entries are stored in the log.
RP614v4 Cable/DSL Router Reference Ma nual 2-8 Content Filtering v3.0, 2006 -03 Log action buttons are described in Ta b l e 2-2 Ta b l e 2- 2. Log action buttons Field Description Send Log . Refresh Click this button to refresh the log screen. Clear Log Click this button to clear the log entries.
RP614v4 Cable/DSL Router Reference Manu al Content Filtering 2-9 v3.0, 2006-03 Configuring E-Mail Alert and W eb Access Log Notifications In order to receive logs and alerts by E-mail, you must provid.
RP614v4 Cable/DSL Router Reference Ma nual 2-10 Content Filtering v3.0, 2006 -03 • Authentication with SMTP Server —If you use an outgoing mail server provided by your current ISP , you do not need to check th is box.
3-1 v3.0, 2006-03 Chapter 3 Maintenance This chapter describes how to use the maintenan ce features of your RP614v4 Cabl e/DSL Router. These features can be found by clicki ng on the Maintenance heading in the Main Menu of the browser interface. V iewing Router S t atus Information The Router S tatus menu provides status and us age information.
RP614v4 Cable/DSL Router Reference Ma nual 3-2 Maintenance v3.0, 2006 -03 This screen shows the following parameters: Field Description MAC Address IP Address DHCP IP Subnet Mask Domain Name Server (DNS) MAC Address IP Address DHCP IP Subnet Mask T able 3-1.
RP614v4 Cable/DSL Router Reference Manu al Maintenanc e 3-3 v3.0, 2006-03 Click on the Connection S tatus button to display the connection status, as shown below . Figure 3-2 This screen shows the following statistics:. Item Description T able 3-2: Connection St atus Items IP Address The W AN (In ternet) IP Address assigned to the router .
RP614v4 Cable/DSL Router Reference Ma nual 3-4 Maintenance v3.0, 2006 -03 Click on the Show S tatistics button to display router us age statistics, as shown below .
RP614v4 Cable/DSL Router Reference Manu al Maintenanc e 3-5 v3.0, 2006-03 V iewing a List of Att ached Devices The Attached Devices menu contains a table of all IP devices that the router has discovered on the local network.
RP614v4 Cable/DSL Router Reference Ma nual 3-6 Maintenance v3.0, 2006 -03 From the Main Menu of the brows er interfa ce, under the Maintenance heading, select the Backu p Settings heading to bring up the menu shown below . Figure 3-5 Three options are available, and are described in the following sections.
RP614v4 Cable/DSL Router Reference Manu al Maintenanc e 3-7 v3.0, 2006-03 Erasing the Configuration It is sometimes desirable to restore the router to the factory default settings. This can be done by using the Erase function, which will restore al l factory settings.
RP614v4 Cable/DSL Router Reference Ma nual 3-8 Maintenance v3.0, 2006 -03 From the Main Menu of the browser interfa ce, un der the Maintenance hea din g, sele ct the Router Upgrade heading to displa y the menu shown below . Figure 3-6 T o upload new firmware: 1.
RP614v4 Cable/DSL Router Reference Manu al Maintenanc e 3-9 v3.0, 2006-03 From the Main Menu of the browser interface, under the Maintenance hea ding, select Set Password to bring up the menu shown below . Figure 3-7 T o change the password: 1. First enter the old password 2.
RP614v4 Cable/DSL Router Reference Ma nual 3-10 Maintenance v3.0, 2006 -03.
4-1 v3.0, 2006-03 Chapter 4 Advanced Configuration of the Router This chapter describes how to configure the ad vanced fe atures of your RP614v4 Ca ble/DSL Router. These features can be found under the Adva nced heading in the Main Menu of the browser interface.
Figure 4-1 Note: If the Disable Port T riggering box is checked after configuring port triggering , port triggering will be di sabled but any port triggering confi guration information you added to the router will be reta ined even though it will not be used.
RP614v4 Cable/DSL Router Reference Manu al Advanced Configuration of the Router 4-3 v3.0, 2006-03 1. Click Add Service . Figure 4-2 2. Enter a service name in the Service Name box. 3. In the Service User box, se lecting the default value of Any allows the servic e to be used by everyone in your network.
RP614v4 Cable/DSL Router Reference Ma nual 4-4 Advanced Configuration of th e Router v3.0, 2006 -03 Configuring for Port Forwarding to Local Servers Although the router causes your entire local networ.
Note: T o assure that the s ame computer always has the same IP address, use the re served IP address feature of your RP614v4 router. See “Using Address R eservation” on page 4-1 1 for instructions on how to use reserved IP addresses. RP614v4 Cable/DSL Router Reference Manu al Advanced Configuration of the Router 4-5 v3.
RP614v4 Cable/DSL Router Reference Ma nual 4-6 Advanced Configuration of th e Router v3.0, 2006 -03 5. T o forward only one port, enter it again in the En ding Port box.
RP614v4 Cable/DSL Router Reference Manu al Advanced Configuration of the Router 4-7 v3.0, 2006-03 2. Change the beginn ing port numb er in the Start Port box. For these games, use the supplied number in th e default listing and add +1 for each additional computer .
RP614v4 Cable/DSL Router Reference Ma nual 4-8 Advanced Configuration of th e Router v3.0, 2006 -03 If you are willing to risk open access, the W AN Setup menu show n below lets you configure a Default DMZ Server . Figure 4-5 T o assign a computer or server to be a Default DMZ server , follow these steps: 1.
RP614v4 Cable/DSL Router Reference Manu al Advanced Configuration of the Router 4-9 v3.0, 2006-03 Setting the MTU Size The default MTU size is usually fine. The no rmal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs , particularly some using PPPoE, you may need to reduce the MTU to 1492.
RP614v4 Cable/DSL Router Reference Ma nual 4-10 Advanced Configuration of the Router v3.0, 2006 -03 Configuring LAN TCP/IP Setup Parameters The router is shipped precon figu red to use priv ate IP address es on the LAN side, and to act.as a DHCP server .
RP614v4 Cable/DSL Router Reference Manu al Advanced Co nfiguration of the Rout er 4-11 v3.0, 2006-03 Using the Router as a DHCP server By default, the router will function as a DHCP (Dynamic Host Conf.
RP614v4 Cable/DSL Router Reference Ma nual 4-12 Advanced Configuration of the Router v3.0, 2006 -03 3. T ype the MAC Address of the computer or server . Tip : If the computer is already present on your network, you can copy its MAC address from the Attached Devices menu and paste it here.
RP614v4 Cable/DSL Router Reference Manu al Advanced Co nfiguration of the Router 4-13 v3.0, 2006-03 1. From the Main Menu of the brows er interfa ce, under Advanced, clic k on Dynamic DNS. Figure 4-7 2. Register for an account with one of the dyn amic DNS service providers whose names appear in the ‘Service Provider ’ box.
RP614v4 Cable/DSL Router Reference Ma nual 4-14 Advanced Configuration of the Router v3.0, 2006 -03 From the Main Menu of the browser interface, un der Advanced, click on Static Routes to view the IP Static Routes menu, shown below . Figure 4-8 T o add or edit a Static Route: 1.
RP614v4 Cable/DSL Router Reference Manu al Advanced Co nfiguration of the Rout er 4-15 v3.0, 2006-03 6. T ype the IP Subnet Mask for this destination. If the destination is a single host, type 255.255.255.2 55. 7. T ype the Gateway IP Address, which must be a router on the same L AN segment as the router .
RP614v4 Cable/DSL Router Reference Ma nual 4-16 Advanced Configuration of the Router v3.0, 2006 -03 Enabling Remote Management Access Using the Remote Manageme nt page , you can allow a user or users on the Internet to configure, upgrade and ch eck the status of your RP614 v4 router.
RP614v4 Cable/DSL Router Reference Manu al Advanced Co nfiguration of the Router 4-17 v3.0, 2006-03 b. T o allow access from a range of IP addresses on the Internet, select IP address range . Enter a beginning and end ing IP address to d efine the allowed range.
RP614v4 Cable/DSL Router Reference Ma nual 4-18 Advanced Configuration of the Router v3.0, 2006 -03 Set up UPnP according to the guidelines below . • T urn UPnP On. UPnP can be enabled or disabled for automatic device configuration . The default setting for UPnP is di sabled.
5-1 v3.0, 2006-03 Chapter 5 T roubleshooting This chapter gives information about troubleshooting your RP61 4v4 Cable/DSL Router. After each problem description, instructions are provided to help yo u diagnose and solve th e problem. Basic Functioning After you turn on power to the router , the following sequ ence of events should occur: 1.
RP614v4 Cable/DSL Router Reference Ma nual 5-2 Troubleshooting v3.0, 2006 -03 Light s Never T urn Off When the router is turned on, th e lights turns on for about 10 secon ds and then turn of f. If all the lights stay on, there is a fault within the router .
RP614v4 Cable/DSL Router Reference Manu al Troubleshooting 5-3 v3.0, 2006-03 • Make sure your computer ’ s IP address is on th e same subnet as the router . If you are using the recommended addressing scheme, your computer ’ s addr ess should be in the range of 192.
RP614v4 Cable/DSL Router Reference Ma nual 5-4 Troubleshooting v3.0, 2006 -03 T o check the W AN IP address: 1. Launch your browser and select an exte rnal site such as www .netgear .com. 2. Access the Main Menu of the router ’ s configuration at http://www .
RP614v4 Cable/DSL Router Reference Manu al Troubleshooting 5-5 v3.0, 2006-03 • Y our computer may not recognize any DNS server addresses. A DNS server is a host on the Internet that translates Interne t names (such as www addresses) to numeric IP addresses.
RP614v4 Cable/DSL Router Reference Ma nual 5-6 Troubleshooting v3.0, 2006 -03 If the path is not functioning correctly , you could have one of the following pro blems: • W rong ph ysical connections – Make sure the LAN port LED is on. If the LED is of f, follow the instructions in “LAN or Internet Port Lights Not On ” on page 5 -2 .
RP614v4 Cable/DSL Router Reference Manu al Troubleshooting 5-7 v3.0, 2006-03 – Y our ISP could be rejecting the Ethernet MAC addresses of all but one of your computers.
RP614v4 Cable/DSL Router Reference Ma nual 5-8 Troubleshooting v3.0, 2006 -03 • T ime is off by one hour . Cause: The router does not automatically sense Daylight Savings T ime. In the E-mail menu, select or cle ar the chec kbox marked “Adjust fo r Da ylight Savings T ime”.
Technical Specifications A-1 v3.0, 2006-03 Appendix A T echnical S pecifications This appendix provides tech nical specifications for th e RP614v4 Cable/DSL Router. Factory Default Settings Smart Wizard Enabled Router Login Default Access Router Login URL http://www .
RP614v4 Cable/DSL Router Reference Ma nual A-2 Technical Specifications v3.0, 2006 -03 General Specifications Network Protocol and Standards Comp atibility Power Adapter Physical Specificati ons Envir.
Related Documents B-1 v3.0, 2006-03 Appendix B Related Document s This appendix provides links to reference documents you c an use to gain a more comple te understanding of the technolog ies used in your NET GEAR product. Document Link Internet Networking and TCP/IP Addressing http://documentation.
RP614v4 Cable/DSL Router Reference Ma nual B-2 Related Documents v3.0, 2006 -03.
Index-1 A Account Name 3-2 B backup configuration 3-6 C configuration backup 3-6 erasing 3-7 restore 3-8 content filtering 2-1 conventions typography i-ix crossover cable 5-2 customer support 1-iii D .
Index-2 S Scope of Document i-ix service numbers 2-5 SMTP 2-9 spoof MAC address 5-4 Sta r t P o r t 4-5 Stat ic Routes 4-1 2 Status Light 1-2 T TCP/IP network, troubleshooting 5-5 time of da y 5-7 tim.
Ein wichtiger Punkt beim Kauf des Geräts NETGEAR RP614v4 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NETGEAR RP614v4 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NETGEAR RP614v4 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NETGEAR RP614v4 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NETGEAR RP614v4 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NETGEAR RP614v4 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NETGEAR RP614v4 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NETGEAR RP614v4. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NETGEAR RP614v4 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
