Benutzeranleitung / Produktwartung ZBA des Produzenten Multi-Tech Systems
Zur Seite of 43
MultiModem ® ZBA MT5634ZBA-Series MT5634ZBA MT5634ZBA-Global MT5634ZBA-V92 MT5634ZBA-V-V92 User Guide.
MultiModem ZBA MT5634ZBA-Series User Guide MT5634ZBA, MT5634ZBA-Global, MT5 634ZBA–V.92, MT5634ZBA-V–V.92 PN S000286G, Version G Copyright This publication may not be repro duced, in whole or in pa rt, without prior expressed written permission from Multi- Tech Systems, Inc.
Table of Contents Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 3 Table of Contents Chapter 1 – Introduction ...................................................................................................... ...................
Table of Contents Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 4 Appendix G – Warranty, Se rvice, and Te chnical Suppor t ......................................................................... ............... 39 Appendix H – ROHS HT/TS S ubstance Con centration .
Chapter 1 – Introduction Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 5 Ch apter 1 – Int r oduct ion Congratulations on your purc hase of the MultiModem ZBA modem.
Chapter 1 – Introduction Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 6 Features Specific to V.92 • Speed – V.92/56K download speeds and 48 K upload speeds when connecting with V.92 server. • Fax – Class 1, 1.0, 2, and 2.1 faxing at speed s to V.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 7 C hapter 2 – Inst al lat ion This chapter shows you step-b y-step how to set up your Multi-Tech MT 5634ZBA modem. Safety Warnings • Use this product only with UL- and CUL-listed computers ( U.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 8 Location of the Jumpers Note: J8 is the Jumper for the Modem with Vo ice Option Changing the Dial-U p/Leased-Line Jumper As shipped from the factory, your modem is configur ed for normal dial-up oper ation.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 9 Step 2: Connect the Modem to Your PC Turn off your computer. Place the modem in a convenient lo cati on, and then connect it to your computer’s serial port, the telephone line or leas ed line, AC power, and, optionall y, your telephone.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 10 Connect the Modem to Your PC Plug one end of the serial cabl e into the RS232 connecto r on the modem and the other end into a serial port connector on your computer, such as COM1 or COM2.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 11 Step 3: Install the Modem Driver If you use Windows 2000 or above, you must install the modem dr iver. T he modem driver tells Windo ws ho w to control the modem.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 12 Step 4: Configure the Modem for Your Country or Region – Global Product Only Different countries have different requireme n ts for how mode ms must function.
Chapter 2 – Installation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 13 Step 5: Configure the modem for best performance With Micorsoft Operating System, you can configure your m odem using HyperT erminal.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 14 Ch apter 3 – Oper at ion About the Front Panel The LED indicators on the front panel in dica te status, configuration, and activit y: TD – Transmit Data. Flashes when the modem is transmitting data to a nother modem.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 15 PhoneTools Features With the PhoneTools communicati ons pro gram included with your modem, you ca n: • Upload and download data fil es. • Send faxes at preset times.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 16 Connecting to the Internet Your Multi-Tech modem is your gate way to the Internet and the World Wide Web. To access the Internet and Web via your modem, you must establi s h a dia l- up account with an Internet service prov id er (ISP).
Chapter 4 – AT Commands, S-Registers, and Result Codes Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 17 Ch apter 4 – A T C omm ands , S - R eg isters , and R esult Codes The AT Commands, S-Regist ers, and Res ult Codes for t he MT5634ZBA-Series Mo dems are published in a separ ate Reference Guide.
Chapter 5 – Remote Configuration Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 18 Chapter 5 – R emote Conf ig ur at ion Remote configuration is a network ma nagement tool that allo ws you to configure MT5634ZBA modem s remotely from one location.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 19 Ch apter 6 – Cal l back Securit y This chapter describes how to use callback securit y with your modem. Callback security protects your net work from unauthorized access and hel p s control long-di stanc e costs.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 20 Setting Callback Security Message Parity The modem’s parity must match the parit y of the computer to which the modem is connected. 1. Open a data communications program suc h as H yperT erminal or PhoneTools.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 21 5. After the delay specified by the #CBD n command, the callb ack modem calls the number associated with the password.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 22 Direct Connection Use this procedure when you want to connect without fi rst being called back. The pas s word that you use must be set up for an optional direct connection.
Chapter 6 – Callback Security Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 23 Callback Assignments Form Location Password Telephone Number 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 24 Chapter 7 – Troubleshooting Your modem was thoroughly tested at the factory before it was shipped.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 25 • Your communication software settings may not match the ph ysical port to which the mod em is connected. The serial cable might be plug ged into the wrong connector— c h eck your computer documen tation to make sure.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 26 • If the modem reports NO ANSWER , the other system has failed to go off-hook, or you might have di aled a wrong number. Check the number. • If the modem reports NO CARRIER , the phone was answered at the other end, but no connectio n was made.
Chapter 7 – Troubleshooting Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 27 Data Is Being Lost • If you are using data compression and a h igh speed serial por t, set the serial p ort baud rate to two to six times the data rate.
Appendix A – T echnical Specifications Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 28 Appendix A – T echnical Specif icat ions The MT5634ZBA-Series mo dem meets t he following .
Appendix A – T echnical Specifications Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 29 Receiver Sensitivity -43 dBm under worst-case conditions AGC Dynamic Range 43 dB Interface TIA/EIA RS-232C/ITU-T V.
Appendix B – Upgradi ng the Modem’s Firmware Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 30 Appendix B – Upg r ading the Modem ’ s Fir m w are Your modem is controlled by semi-perm an ent software, called firmware , which is stored in flash memory.
Appendix B – Upgradi ng the Modem’s Firmware Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 31 Step 3: Download the Upgrade File 1. If you are not already at the MultiModem ZBA Firm ware page of the Multi-T ech W eb site, follo w the procedure in “Step 2: Ident ify the Current Fir mware.
Appendix C – Regulator y Compliance Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 32 Appendix C – R eg ulator y Complianc e FCC Part 15 Regulation This equipment has bee n tested an d found to comply with the limits for a Class B digital devic e, pursuant to Part 15 of the FCC rules.
Appendix C – Regulator y Compliance Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 33 Canadian Limitations Notice Notice: The ringer equiva le nce number (REN) assigned to each terminal device provide s an indication of the maximum number of terminals allo wed to be connected to a telep hone in terface.
Appendix C – Regulator y Compliance Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 34 New Zealand Telecom Warning Notice 1. The grant of a Telepermit for any item of terminal equip ment indicates only that Te lecom has accepted that the item complies with minimum conditions for c onnection to its network.
Appendix D – Waste Electrical and Electro nic Equipment Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 35 Appendix D – W a ste Elect rical and Elect ronic Equipment WEEE (Waste El.
Appendix E – Installing a Mo dem under Linux Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 36 Appendix E – Inst al ling a Modem under Linux This appendix expl ains how to install a modem on a computer oper ating under the Red Hat Linux 6.
Appendix F – Connectin g to a Cisco Router Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 37 Appendix F – Connect ing to a Cisco R outer Connecting to a Cisco Router Console Port The console port on the Cisco IOS ® router is an asynchr onous serial port configured as data communications e qu ipme nt (DCE).
Appendix F – Connectin g to a Cisco Router Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 38 Step 3: Console Port Final Setup Send the following command string to the modem co nn ec.
Appendix G – Warrant y, Service, and Technical Support Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 39 Appendix G – W arrant y , Ser v ic e, and T echnical Suppor t Multi-Tech Warranty Statement Multi-Tech Systems, Inc.
Appendix G – Warrant y, Service, and Technical Support Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 40 airmail parcel post; shipments made by an y ot her method will be refused. Please include, inside the shi pp ing box, a description of the problem, a return shipping address (must have street address, not P.
Appendix H – ROHS HT /T S Substance Concentration Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 41 Appendix H – R OHS HT/TS Substance Conc ent r ation 依照中国 标 准的有.
Index Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 42 Inde x A AT commands &D ................................................................................... 12 &F ........................................................
Index Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G) 43 R Remote Configuration .......................................................... 17 Escape Characte r .............................................................. 17 Replacement Par ts .
Ein wichtiger Punkt beim Kauf des Geräts Multi-Tech Systems ZBA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Multi-Tech Systems ZBA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Multi-Tech Systems ZBA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Multi-Tech Systems ZBA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Multi-Tech Systems ZBA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Multi-Tech Systems ZBA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Multi-Tech Systems ZBA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Multi-Tech Systems ZBA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Multi-Tech Systems ZBA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
