Benutzeranleitung / Produktwartung TKR 650 WP des Produzenten Miele
Zur Seite of 88
Oper ating instructions for heat pump dryers T o avoid the risk of accidents or damage to the appliance it is essential t o read these instructions befor e it is installed and used for the first time.
Caring for the envir onment 2 Disposal of the packing mat erial The packaging is designed to pr otect th e appliance from damage during transportation. The packaging mat erials used are select ed from materials which are envir onmentally friendly for disposal and should be recycled.
Contents 3 Caring for the environment .................................................................................. 2 Warning and Safety instructions ......................................................................... 6 Operating the tumble dryer .
Contents 4 Cleaning and care ................................................................................................ 46 Emptying the condensed water container ............................................................. 46 Pr eparing the condensed water container for Steam smoothing .
Contents 5 Electrical connection U.K. ...................................................................................... 76 Consumption data ............................................................................................... 77 T echnical data .
W arning and Safety instructions 6 It is essential to r ead these instructions. This tumble dryer complies with current safety r equirements. Inappr opriate use can, however , lead to personal injury and damage to pr operty .
W arning and Safety instructions 7 This tumble dr yer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and r ecognise the consequences of incorrect oper ation.
W arning and Safety instructions 8 The ele ctrical safety of this tumble dryer can only be guarant eed when correctly earthed. It is essential that this standar d safety requir ement is met. If in any doubt, please have the household wiring system t ested by a qualified electrician.
W arning and Safety instructions 9 This tumble dr yer must not be used in a non-stationary location (e.g. on a ship). Do not mak e any alter ations to the tumble dryer , unless authorised to do so by Miele.
W arning and Safety instructions 10 Please obser ve the instructions in "Installation and connection" and the "T echnical data". The acc essibility of the plug must always be ensured, in or der to disconnect the tumble dryer from the mains.
W arning and Safety instructions 11 T o prevent the risk of fir e, the following te xtiles must not be dried in this tumble dryer: – Items which have not been washed. – Items, such as workwear , which have no t been thor oughly cle aned and which are still soiled with gr ease, oil or other deposits (such as cosmetics, lotions etc).
W arning and Safety instructions 12 Remove all items fr om pockets (e.g. lighters, matches). W arning: Do not switch the dryer off before the drying progr amme has finished. If this is done, the laundr y must be hung up or spread out t o cool it down.
W arning and Safety instructions 13 In many pr ogr ammes, the heating phase is followed by a cooling down phase to ensur e that the items ar e not too hot to handle when you remove them (this also avoids the danger of the laundry self- igniting). The progr amme is not finished until the cooling down phase has been completed.
W arning and Safety instructions 14 If the water is dr ained ext ernally through the dr ain hose instead of being collected in the condensed wat er container , make sure the dr ain hose is securely attached if you hang it in a sink or basin to avoid the hose slipping and the water causing damage.
W arning and Safety instructions 15 Using a fragr ance flacon (optional accessor y) Only use genu ine Miele original fr agrance flacons. The fr agr ance flacon must be stored in its packaging so please make sur e you retain this. Caution. The fr agr ance can leak out of the flacon.
W arning and Safety instructions 16 Accessories Only use genui ne Miele original spare parts and accessories with this appliance. If non-Miele parts are used, guar antee, performance and product liability claims will be invalidat ed. The tumble dr yer can be combined with a Miele washing machine in a washer -dryer stack.
Operating the tumble dryer 17 Control panel a Display with sensors See the following page for more information. b Start/Stop bu tton F or star ting the pr ogramme selected and cancelling a progr amme once it has started. c Drying level bu tton F or all programmes with a selectable drying level.
Operating the tumble dryer 18 Display , OK, sensors These sensors are used t o operate the display when the symbols light up. – sensor Scr olls down the list to the ne xt option or decreases a value. – OK sensor Confirms the progr amme selected, a value set or opens a sub-menu.
Operating the tumble dryer 19 P erfe ct Dry indicator With progr ammes with a selectable dr ying level, the P erfect Dry system calculates the r esidual moisture present in the laundry to ensure a pr ecise drying result. The Perfect Dry indic ator . .
Operating the tumble dryer 20 Examples on how to oper ate the appliance Scrolling through a list The option which can be selected will b e highlighted with a white bar .
Before using for the first time 21 Removing the protective foil and stick ers Remove – the prot ective foil from the door . – any stickers from the fr ont and the lid. Please do not r emove any labels (e.g. the data plate), visible when you open the door .
Before using for the first time 22 Setting the time of day (if n ecessary) Only touch the sensor if you would like a 12 hour clock display . Clock format 24 h clock 12 h clock Co nfirm by touching the OK sensor . Time of day 12 : 00 T ouch the sensor to decr ease or the sensor to incr ease the hour .
EcoF eedback 23 Y ou can use the EcoF eedback sensor t o call up information about the energy consumption of your dryer . T ouching the EcoF eedback sensor will call up two types of information: – an estimate of the consumption before the pr ogramme begins – the energy consumption during the progr amme.
1. Notes on correct laundry care 24 P oints to note regarding washed laund ry – When washing very heavily soiled it ems ensure that you use sufficient deter gent and select a high temper ature. If in doubt, wash the items sever al times. – Do not put soaking wet items int o the tumble dr yer .
1. Notes on correct laundry care 25 Garment care label symbols Drying Normal/higher temper ature Reduced temper ature: Select Gentle tumble (f or delicate te xtiles) Do not tumble dry Ironing V ery hot Hot Warm Do not iron Laundry care when dr ying in a tumb le dryer See the "Pr ogramme chart".
2. L oad the tumble dr yer 26 It is essential to read "1. Notes on correct laundry care" first of all. P ress the button to switch the dryer on. The interior drum lighting will come on. The interior drum lighting will aut omatically go out after a few minutes and/or after the start of a progr amme to save ener gy .
3. Select a progr amme and start it 27 Select a progr amme Y ou can use the pr ogramme selector t o select the following: – one of the progr amme names on the con trol panel, or – F urther programmes or – F avourites or – Mixed items T urn the progr amme selector .
3. Select a progr amme and start it 28 Progr ammes with drying levels – Cot tons, Minimum iron, Delicates, Denim, Shirts, Express, Gentle smoothing, Steam smoothing, Automatic plus, Sportswear , Outerwear The drying level can be altered aft er selecti ng one of these progr ammes.
3. Select a progr amme and start it 29 Other programmes and the timed dr ying programmes – Cot tons , W oollens handcare, Silks handcare, Standard pillows, Proofing, Cottons hygiene The progr amme duration is pr e-set and canno t be alter ed. – Coo l air , Warm air , Basket programme Y ou can select the dur ation in ten- minu te stages.
3. Select a progr amme and start it 30 Select any options or delay star t (if required) Options P ress a butt on. The button will light up when the option i s selected. An option can only be selected when the load indication has gone out in the d isplay .
4. Remove the laundry 31 End of progr amme/Anti-crease At the end of the pr ogramme: Anti- crease (if select ed) or Finish will light up. The Start/Stop butt on will no longer be lit up. T o save energy, 10 minut es after the end of the pr ogramme the Start/Stop butt on will begin to flash slowly and the display will go out.
Options 32 The options are switched on or off by pressing the appr opriate button. Not all options can be combined or can be selected/deselected The button will light up when the option is select ed. Gentle tumble Delicate fabric (with the symbol on the care label, e.
Options 33 The following options can be selected in addition to the pr ogramme: Gentle tumble 1 F reshen up 1 Auto load contr ol 1 Anti- cr ease Buzzer Cottons – – – X X Cottons X X X X X Mi.
F avourites 34 Y ou can save your own customised pr ogrammes under names of your choice. These favourite pr ogrammes will be sor ted alphabetically . T urn the progr amme selector to F avourites . 1. Create Favourite programmes Create Confirm Create with the OK sensor .
F avourites 35 Summary Summary Accept Cottons Normal Select Accept and confirm. 2. Entering a name Y ou can enter a name of up t o 10 charact ers. Enter name A Ä B C D T ouch the or sensor to move along the charact ers until the charact er you want is highlighted.
Mixed items 36 F or dr ying a mixed load of it ems which can be compiled from a list. T urn the progr amme selector to Mixed items . T ouch the or sensor to highlight items. A list of 19 items will appear in alphabetica l order in the display .
Delay start 37 T o select delay start With delay start you can delay the start of the pr ogramme by up t o a maximum of 24 hours. Please note that the time of day must be enter ed correctly for the delay start function to work. After selecting the pr ogramme, pr ess the Delay start button.
Pr ogramme chart 38 Cottons ** Max. load 9.0 kg* Use for Cotton items such as those described under C ottons Normal with normal residual moistur e. Note – Items ar e dried to a Normal level only . – The Cott ons progr amme is the most energy-efficient for drying cotton items with normal r esidual moisture levels.
Pr ogramme chart 39 Minimum iron Max. load 4.0 kg* Normal plus, Normal, Slightly dr y, Hand iron , Hand iron Use for Minimum iron it ems made of cotton, synthetic or mixed fibr e, e.g.: workwear , tunics, tops, dr esses, trousers, table linen and socks.
Pr ogramme chart 40 Express Max. load 4.0 kg* Extra dry, Normal plus, Normal, Slightly dry, Hand iron , Hand iron , Machine iron Use for Garments suitable for the Cottons pr ogramme. Note The progr amme duration is short er . Gentle smoothing Max.
Pr ogramme chart 41 Steam smoothing Max. load 1.0 kg* Normal, Hand iron Use for – Cotton and linen fabric – Minimum iron it ems made of cotton, synthetic or mixed fibr e, e.g. tr ousers, jackets, shirts. Notes – F or all items which require – dampening befor e ironing.
Pr ogramme chart 42 Delicates Max. load 2.5 kg* Normal plus, Normal, Slightly dr y, Hand iron , Hand iron Use for Delicate items with the symbol o n the care label made of synthetic fibre, mix ed fibre, r ayon and easy care cotton, e.g.
Pr ogramme chart 43 Outerwear Max. load 2.5 kg* Normal, Hand iron Use for Outerwear which is suitable for drying in a tumble dryer . Proofing Max. load 2.
Pr ogramme chart 44 Basket progr amme Max. load for basket 3.5 kg Notes – This progr amme may only be used with the Miele drying basket (optiona l accessory) fitted. – Use this progr amme to dry or air items which ar e suitable for dr ying in a tumble dryer but which are not suitable for drying using mechanical action.
Changing the progr amme sequence 45 Y ou cannot change to another pr ogramme once a pr ogramme has started (this pr events unintentional alter ations). If you move the progr amme selector , Programme cannot be changed will light up in the display until you move the pr ogramme select or back to the original progr amme.
Cleaning and care 46 Emptying the condensed water container The condensed water is collected in the condensed wat er container . Empty the condensed water contai ner after every drying progr amme. Empty the container will light up if the maximum level of the condensed water container is reached.
Cleaning and care 47 Pr eparing the condensed wat er container for Steam smoothing Con densed water which has collected in the condensed water container is direct ed into the drum in the Steam smoothing p rogr amme. The condensed water container must therefor e be filled with water up to at least the –min– marker .
Cleaning and care 48 Fluff filters This tumble dryer has 2 fluff filters in the door opening: the upper and lower fluff filt ers trap fluff produced during the drying process. Removing visible fluff Remove any fluff after every drying cycle. Tip: Y ou can also use a vacuum cleaner so that you can remove the fluff without touching it.
Cleaning and care 49 Cleaning the fluff filters and air flow openi ngs thoroughly If the drying duration has become lo nger or the surface of the filters is visibly compacted with fluff, you should carry out the following cleaning procedur e. If using a fr agrance flacon make sure you r emove it beforehand.
Cleaning and care 50 Plinth filter Only clean the plinth filter when Cl ean out airways lights up. T o delete Cl ean out airways : Switch the dryer off and back on again / confirm OK . Removing the plinth filter P ress the r ound, indented area on the heat ex changer access panel to open it.
Cleaning and care 51 Cleaning the plinth filter panel Use a damp cloth t o remove any fluff. Make sure that you do not damage the rubber seal when doing this. Che ck whether the cooling fins are blocked with fluff (as follows). Checking the condenser unit Danger of injury .
Cleaning and care 52 Replacing the plinth filter Fi t the filter back on the handle. Make sure it is the corr ect way round. T o ensure that the filt er is positioned corr ectly in the front of the heat ex changer unit: Fi rst insert the handle with the plinth filter attached over the two guide pins.
Cleaning and care 53 T umble dryer Disconn ect the tumble dryer from the mains electricity supply . Do not use solven ts, abr asive cleaners, glass cleaners or all- purpose cleaners.
F ragr ance flacon 54 Using a fragr ance flacon (optional accesso ry) will add a pleasant fragr ance to your laundry . Befor e using a fragr ance flacon, please read "W arning and safety instructions - Using a fragr ance flacon (optional accessory)".
F ragrance flacon 55 Markers and must line up with on e another . T urn the outer ring clockwise a little. – Y ou will feel a slight r esistance and hear a soft click. Marker must be in position : this is the position at which you can feel a r esistance.
F ragr ance flacon 56 Damp laundry and longer drying dur ations with sufficient heat transfer are needed for the fr agrance t o be released int o the laundry effectively . The fragr ance will also be noticeable in the room air during the pr ocess. F ragrance is not r eleased when using the Cool air pr ogramme.
F ragrance flacon 57 Never lay the fr agrance flacon down on any surface as the fragr ance will leak. Only store the fr agrance flacon in its original packaging – when storing the fr agrance flacon in its original packaging whilst you are not using it, e.
Pr oblem solving guide 58 With the help of the following notes minor faults in the performance of the appliance, some of which may result fr om incorrect oper ation, can be put right without contacting the Service Department.
Pr oblem solving guide 59 Problem Cause and remedy Information Clean out airways lights up at the end of a pr ogramme There is a build-up of fluff in the airways. Clea n the fluff filters. Clea n the plinth filter . See "Cleaning and care".
Pr oblem solving guide 60 Problem Cause and remedy Comfort cooling The progr amme has finished but the laundry has not yet cooled down. Either r emove the laundry and spread it out to cool down or leave it in the tumble dryer to cool down during the cooling phase.
Pr oblem solving guide 61 Unsatisfactory dr ying results Problem Cause and remedy The laundry is not sufficiently dry The load consisted of differ ent types of fabric. Fini sh drying using the Warm air timed drying progr amme. Select a differ ent progr amme next time.
Pr oblem solving guide 62 Other problems Problem Cause and remedy The drying process goes on too long or even switches off * The room in which the dryer is located is t oo warm. V entilate the r oom thoroughly . Deter gent residues, hair and fine fluff can clog the filt ers.
Pr oblem solving guide 63 Problem Cause and remedy There are humming noises This is not a fault. The compressor (heat pump) is oper ating or you have selec ted the St eam smoothing programme. No actio n is requir ed. These noises are quite normal and can be heard when the compr essor or the condensed water pump is oper ating.
Pr oblem solving guide 64 Bottom right grille I n general, the cooling fins behind the grille on the bottom right do not need cleaning. They should only be cleaned if the drying process is taking an ex ceptionally long time due to a very high level of dust or fluff in the room in which the dryer is located.
Pr oblem solving guide 65 Fluff filter in the condensed wat er container If you are e xperiencing problems running the Steam smoothing pr ogramme, the fluff filt er at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked.
Pr oblem solving guide 66 Steam smoothing spr ay jet Limescale deposits will impair the spr ay jet. In this case, the spray jet must be r emoved and replaced with a new one (see "Optional accessories"). The spray jet can only be r eplaced using the special tool supplied with the new spray jet.
After sales service 67 Repairs In the event of any faults which you cann ot remedy yourself, please contact your Miele Dealer or the Miele Service Department.
Installation and connection 68 F ront view a Mains connection cable b Control panel c Condensed water container – empty after every drying cycle d Door – do not open during drying e Heat ex change.
Installation and connection 69 Rear view a Pr otruding lid for holding when moving the dryer (see arrows) b Accessories for ext ernal drainage of condensed water: hose clip, adapter and hose holder c .
Installation and connection 70 Installation Levelling the dryer Mak e sure the dryer door can be opened without hindrance aft er installation. The appliance must stand perfectly level to ensur e safe and proper operation. The screw feet can be adjust ed to compensa te for any unevenness in the floor .
Installation and connection 71 Additional installation r equirements Pushing the dryer under a worktop This tumble dryer is suitable for push ing under a worktop. It is ver y important to avoid a build-up of heat. The warm air which is expelled fr om the dryer must be able to dissipate.
Installation and connection 72 External condensed water outlet Notes When drying is in progr ess, c ondensed water is pumped into the condensed water container thr ough the drain hose which is locat ed at the back of the dryer .
Installation and connection 73 Arranging the dr ain hose Do not pull on the dr ain hose and do not stretch it or allow it t o become kinked. This could damage the hose. There will be a small amount of r esidual wat er left in the drain hose. Have a container ready t o collect this.
Installation and connection 74 Examples – Drainage into a sink or floor gully Use the hose holder to pr event the dr ain hose from becoming kinked. P ress the small catches on the left and right of the hose holder with your thumbs (black arrows) and .
Installation and connection 75 1. Adapter 2. Nut 3. Hose clip 4. End of the hose (secured with the hose holder) 5. Non-return valve 6. T umble dr yer dr ain hose Fi t adapter 1 to the sink dr ain outlet using nut 2 . The nut is usually fitted with a washer which must be removed.
Installation and connection 76 Electrical connection U .K. All electrical work should be carried out by a suitably q ualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Ensure power is not supplied t o the appliance un til after installation work has been carried out.
Consumption data 77 Load 1 Final spin speed in a domestic washing machine Residual moistur e Energy Duration kg rpm % kWh min Cottons 2 9.0 4.5 1000 1000 60 60 2.15 1.20 178 105 Cottons Normal 9.0 9.0 9.0 1200 1400 1600 53 50 44 1.95 1.85 1.65 161 153 136 Cottons Normal + Gentle tumble + F reshen up 9.
Consumption data 78 The consumption data shown in the EcoF eedback display can vary from the consumption data quoted here. The variations arise fr om the way the data is measured in the dryer .
T echnical data 79 Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Suitable for pushing under a worktop Y es Suitable for stacking Y es Weight appro x. 61 kg Drum volume 120 litres Load siz e 9.0 kg (weight of dry laundry) Capacity of condensed water container 4.
Settings menu 80 Calling up settings Y ou can use the Settings menu to alt er the dr yer's electronics t o suit different requir ements. Settings can be altered at any time. Opening the Settings menu Switc h the dryer on. The progr amme selector must not be at the F urther programmes/F avourites/ Mixed items positions.
Settings menu 81 Time of day First select either a 24 hour or 12 hour cloc k. Y ou can then set the curr ent time of day . Clock format – 24 h clock – 12 h clock Select the clock format you want with the or sensor and confirm with the OK sensor .
Settings menu 82 – Light Clean out airways appears when ther e is only a small build-up of fluff. Buzzer volume The buzzer can be set t o be louder or quiet er .
Settings menu 83 Code The code prevents your dryer being used without your knowledge. Options – Activate The code is 250 and can be activa ted. When the code has been activated, you have to enter the code aft er switching the dryer on. Otherwise the dryer cannot be operat ed.
Settings menu 84 Appliance switch-off T o save energy the dryer will switch off aut omatically after 15 minutes. Y ou can lengthen or shorten the time.
.
.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.
M.-Nr . 10 000 790 / 00 en-GB TKR 650 WP .
Ein wichtiger Punkt beim Kauf des Geräts Miele TKR 650 WP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele TKR 650 WP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele TKR 650 WP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele TKR 650 WP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele TKR 650 WP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele TKR 650 WP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele TKR 650 WP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele TKR 650 WP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele TKR 650 WP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
