Benutzeranleitung / Produktwartung 521475 des Produzenten Intellinet
Zur Seite of 121
Print Server User’s Manual Version: 2.0 (January, 2006).
COPYRIGHT Copyright © 2006/2007 by this company. All rights reserved. No part of this publication may be reproduced, transm itted, transcribed, stored in a retrieval system, or translated into any la.
CONTENTS 1. INTRODUCTION ................................................................. 1 1.1 Product Introducti on .............................................. ........... 2 1.2 Product Package ...................... ........................ ...
6. UNIX SYSTEM NETWORK .............................................. 53 6.1 Introduction ........ ....................... ........................ ............. 54 6.2 Enable Print Server’s TCP/IP Suppor t ........................... 55 6.3 Setup Print Server’s IP Address .
8.3.6 NetWare ........... ............. ........... ............. ........... ............. ........... .... 92 8.3.7 AppleTalk ........ .......... .............. .......... .............. .......... .............. .... 93 8.4 Setup Wizard ......... .
1 1. Introduction.
2 1.1 Product Introduction Thank you for purchasing an d using our print server. This print server allows your printer to become a shared device on the network. It of fers printing flexibility and manageabilit y on your Loca l Area Network at an ex trem ely low cost and wi th an ab solute minimu m set up and maintenance required.
3 1.2 Product Package This package contains th e following com ponents: One Print Server One Power Adapter One Quick Installation Guide One CD-ROM (In cluding all the s oftware util it.
4 1.3 Network Printing Architecture This sectio n illustra tes how print server functions and operates on the network. Befo re you i nstall and use print server, it is st rongly reco mme nded that you.
5 1.3.1 Print Ser ver Network Functions Window s NT S erve r NetWare Server Windows 98 Window s NT Work st at ion Windows 2000 Unix Print Server Print Server Because print server supports IPX/SPX, NetBEUI, TCP/IP and AppleTalk networ k protocols, any net worked computer can directly print to the print server from any of its installed protocol .
6 Common operating sy stems for clien ts are classi fied as following: Windows 95/98SE/Me/NT/2000/ XP/2003 Our print server system provide s PTPP (Peer-to-Pee r Printing) driver and utilities for Windows 95/98SE/Me/NT/2000 /XP/2003 users. PTPP (Peer-to-Peer Printing) suppor ts TCP/IP p rotocol.
7 W indow s 98 PTPP Prin t Server MIS-2 P1 P2 P3 P1 Print S erver MIS-1 UNIX / Linux UNIX (include HP/UX , SC O Unix, SunOS, Solaris, Unixware DECUnix, IBM AIX and ot hers) and Linux use the syste m-standard LPR to print through prin t server. MAC OS MAC OS can use the syste m-standard AppleTalk network to print through print server.
8 1.3.3 Network Printing Fu nctions for Network S erver Window s NT S erve r NetWare Server Windows 98 Window s NT Work st at ion Windows 2000 Unix Print Server Network Serve r Comm on ne two rk s er .
9 1.4 Network Printing Environment Common network environm en t are classified as following: Windows Peer-to-Pee r Network The client’s PTPP driver will use TC P/I P pro toc ol to print through print server.
10 NetWare Network (see below).
11 1.5 Contents of the User’s Manual Chapter 2 explains prin t serv er’s h ardware installation and configuration. It is str ongly recommen ded for you to read. The following chapters intro duce: Chapter 3. Window s Peer-to-Peer Network Chapter 4.
12 “Available Ports” in “ Netwo rk Ports Quick Setup” in Windows XP SP2..
13 1.6 Firmware & Printing Function The print serv er provides a com plete network printing solution . The feat ure set is list ed be low: PTPP (Peer-to-Pe er-Printing) TCP/IP (L PR) I.
14 2. Hardware Inst allation 1. Unpack the print server package and verify that all the items listed in the s ection 1.2 are provided. 2. Connect the print server to the pr inter you want to share on the network. 3. Connect the print server to your network by attached the networ k cable to the UTP port of the print server.
15 3. Windows Peer-to-Peer Network.
16 3.1 System Architecture Print server supports Window s Peer-to-Peer network printing mode, whi ch is suitab le for most medi um an d smal l network environments. Th rough quick and simple installation procedure , user s ca n immediately enjoy the convenience of network printing.
17 2. Client Instal lation and Configurat ion (refer to section 3 for more detailed information). Client users m ust install Windows PTPP driver (Peer- to-Peer Printing) for network pri nting.
18 3.2 Administrator Installation an d Setup The Administrator Installati on can be perform ed on Windows 95/98SE/Me/NT/2000/ XP/2003 wit h the same user interface. Before the inst allation, please verify that your network protocol is inst alled on your PC (TCP/IP, IPX and/or NetBEUI).
19 3. The “Prin t Server Ut ilities ” window wi ll be displayed. Click “Next ”. 4. Click “Next” to insta ll the utilities in the default fold er or clic k “Chan ge” to specify the destination folder where you would like to install the utilities.
20 5. Select the components you want to install. It is highly recommended to inst all all provided components . Click “Next” to continue..
21 6. The system will star t to install the utilities automatically. 7. You have completed th e installation phase and prepare to con figure the P rint Server. Th e “Choo se Print Server” will list all Pr int Server s within the network. Select the Print Server you w ould like to configure and click “Next”.
22 NOTE 1: If this is the firs t tim e you configure the Print Server, the “Print Server Name” is the last 6-digit of MAC ID with prefix “PS”. Pleas e check the MAC ID on the print server. NOTE 2: The list can only disp lay the d evices from the same manufacturer.
23 9. Specify the IP Address for the Print Server manually or click “Next” to ke ep default IP Address, i.e. 192.168.2.2..
24 10. The configuration summa ry is displayed in t he window. Now, you have comple ted the Print Server s etup. Click “Finish” and your system will add network port of the Print Server to your PC au tomatically . 11. The Administrator Installa ti on procedure is total ly completed.
25 The Administrator Installati on Program have executed the installa tion proced ure that performs th e followin g tasks: Install all utilities and drivers to the administrator’s PC.
26 3.3 Administrator Utilities After Administrator Insta llation is completed, there will be f our utilit ies in pri nt server ’s Program folder. Network Ports Quick Setup – Add the net work ports of pr int servers within the network t o your PC.
27 3.4 Client In stallation and Setup The Client Installation can be performed on Windows 95/98SE/Me/NT/2000/XP/2003 with the same user interface. Before the installati on proced ure, please confirm that your PC has co nnected to th e networ k and installed at least one network prot ocol.
28 3. The “Prin t Server Ut ilities ” window wi ll be displayed. Click “Next ”. 4. Click “Next” to insta ll the utilities in the default fold er or clic k “Chan ge” to specify the destination folder where you would like to install the utilities.
29 5. The system will star t to install the utilities automatically..
30 6. Now, the in stallation procedure is completed, you are ready to set up the client’s c omputer. All network ports of the Print Server s detected on the network will be added to your PC automatica lly, click “Continue”.
31 After the installation, you have completed the following tasks: Install all utilities and driv ers to the client’s PC. Add all the print server’s network ports of the network to the client’s PC. You can then perfor m the Windows’ sta ndard “Add Printer” procedure t o add network printers to your PC .
32 3.5 Client Utilities After C lient Installatio n is completed, there will be three to ols in print se rver’s Progr am fold er. Networ k Ports Qu ick Setu p Remote Ports Uninstall Network Driver The Uninstall Netwo rk Driver will assist you in removing all installed client software.
33 During the client’s installation procedur e, the system will automatic ally search f o r all print servers on the network, and add the m into the printer ports of the client’s computer (see below). If you have just installed an other new print server in the network, you must run thi s prog ram first.
34 Please be awa re that Networ k Ports Quick Setup Utility can only detect and con figure al l print se rver s on the same network, it c annot search an d configure print servers on other subnets across networ k segments. You must use Remote Ports Utilit y describe d in the next section to manage rem ote (across network se gments) print servers .
35 Step1. Run Remote Ports Utility. Clicks “Add” to add a remote print port. Step2. Enter print serve r’s name, IP address, s elect used ports, and enter LP R queue name of each port. Click “Ok”. Step3. The new re mote print port is displa yed as follow s.
36 select you r printer port as th e newly added re mote printer port..
37 3.6 Windows Add Printer Procedure After adding a “Network Port ” of the print server to your PC by Administra tor or Client Insta llation Progra m, you can follow the proc edur e des cribed below to add printer to the Windows.
38 Step4. S elect “Local pr inter attach ed to this computer ” and m ake sure that “Aut omatical ly detect and install my Plug and Play printer” is not selected.
39 Step6. Select a suitable printer manufacturer and the printer model and clic k “N ext”. If your printer is not in the list, click “Have D isk…” to install the driver of the printer. Af ter installation, the printer model will be added to the list.
40 Step8. Choose to print the test pa ge or not . It is recommended to print a test page. C lick “Nex t”. Step9. You have adde d the printer to the PC successf ully. The inf o rmation of the print er is displayed in the wind ows. Click “Finish”.
41 4. Windows NT/2000/2003 Network.
42 4.1 System Architecture In Windows network environm ent, other than the Peer - to-Peer network printing arch itecture described in the previou s chapter, we also o ffer the Serve r-Based Prin ting architecture for Windows NT/2 000/2003 server.
43 4.2 Windows NT/2000/2003 Server Installation and Setup Please follow the proced ures descri bed below for installation and const ruct a pe er-to-peer connection (PTPP) between Windows NT/2000/2003 Server and Print Server.
44 Step3. Share the above se rver’s printer to the network by performing the standard Windo ws printer s haring process..
45 4.3 User Installation and Setup After serv er side’s installati on is completed, client side will be able to find the serv er’s shared printer in Network Neighborhood.
46 5. NetW are Network.
47 5.1 System Architecture We implement NetWare prin ter shar ing functi onality into the p rint server its elf, thus allowing one o r more printers attached by a print se rver to be connected to th e network. We have develope d the print server to support NetWare p rint server.
48 Printing perf ormance is enhanced . Relieve NetWare file s erver’s burden. Relieve the need of a worksta tion running the remote printer utility. Improve produc tivity by locating the prin ter near the workgroup. Each print server should l og into a NetWare server before servicing t he print jobs .
49 5.2 NetWare 3.x/4.x/5.x Inst allation & Setup Once your print server is co nnected to your Ethernet network, you can set it up fo r use with your networking software. 5.2.1 Installation Using PCONSOLE 5.2.1.1 Configuring as Print Server Mode 1.
50 key until the Available Options main menu is displayed. 7. Select Print Server Information. 8. Press the Insert key to add a new NetWare print server object. The print server name can be identical to the PSxxxxxx name printed on the label of the prin t server.
51 13. Press Escape, and answer Yes to the Save Changes question. 14. Select Queues Serviced by Print er, then select Printer 0 (or Printer 1 , Pr inter 2) and press Enter. 15. Press Insert and add your newly created pri nt queue to th e lis t of qu eues s erviced by the prin ter.
52 17. Reset the print server to have the change s take effect. NOTE: If the print server you have is with multiple printer connectors , you may cr eat e multip le print queues and printer objects.
53 6. UNIX System Network.
54 6.1 Introduction The print ser ver is avail abl e for TCP/IP printing by Unix LPD (Line Printer Da e mon) protocol. The LPD protocol originated with Unix release is based on the BSD version of Unix and supported under most ve rsions of Unix.
55 6.2 Enable Print Server’s TCP /IP Support The default conf iguration of the print server is with TCP/IP support enabled. An yway, you can configure the print ser ver to enable TCP/IP support using th e configuration program .
56 6.3 Setup Print Server’s IP Address The print server must have a unique IP address in order to be recognized by the networ k. You can set up the IP addr ess on the various Unix systems using any one of the following m ethod s: 1. DHCP (Dynamic Host Conf iguration Protocol) 2.
57 services before doing the f o llowing BOOTP configuration. To rebuild th e NIS map, pl ease refer to your system documentation. To conf igure t he IP address data for the BOOTP server, you will need to log in the ho st o f BOOTP server as the superuser (root).
58 For example , a print server w ith the fo llowing configuration: Node ID: 0000B4010101 (this im plies Ethernet address is 0000B40 10101), IP address: 203.66.191. 12 The entry for this print server in the /etc/bootptab file should be: PS010101: :ht=1: :ha=0000B4010101: :ip=203.
59 6.4 Verify Print Server’s IP Address To verify that your print se rver is respond ing to th e newly assigned IP addres s using a PING command: ping i p-a ddre ss.
60 6.5 Configure Remo te L PD Printing on the Host The procedure you use to co nfigure your Uni x host(s) to allow printing to your networ k remote prin t server varies between different var ieties of Unix. The procedure below can be us ed for Unix variants that are related to B SD Unix, such as SunOS or Linux.
61 mkdir /var/spool/lpd/pse rverd chown daemon /var/spool/lpd/pserverd chgrp daemon /var/spool/lpd/pserverd chmod 775 /var/spool/lpd/pser verd 3. Add an entry to the host’ s /etc/printcap file, similar to the f ollowing: printer-name: :lp= : :rm=203.
62 The print server should now be availabl e for printing from your Unix host..
63 7. Configuration Utility.
64 7.1 Introduction This chap ter intro duces print s erver’s sys tem configuration utility in Wind ows environment. This utility is automatic ally installed du ring Windows Administrator Utility installat ion procedure - refer to section 3.2 a nd 3.
65 SNMP Configuration : SN MP Information Configuration. SMB : Configure the SMB Group Nam e. System Configuration : Pr int Server Network Ability Setting and Firmware Upgrade. Setup Wizard : Guide You Through All the Settings. Report : List the Status of All Available Print Servers on the Network.
66 7.2 Search for A ll Available Print Ser ver Every time when you run prin t server’s configuration utility, click the “Search” icon on the tool bar. The configuration utility will dela y for several se conds becau se the utility i s using system’s availab le network pr otocols to search for all prin t servers o n the network.
67 7.3 Status of Print Server Click “Status” icon on the too l bar, the sta tus of the curr ent sele cted print se rv er will be showed on the right side of the window.
68 You can restart the print server by pressing the “Reboot” button ..
69 7.4 Setup the Print Server Click “Setup” icon on the tool bar, the setup items of the current selected print server will be showed on the right side of the window. Double click one of the icon s to set up the selected print server. A screen will po p up to verif y “User Name” and “Password” of the print se rver.
70.
71 7.5 Genera l Configuration Double Click “General” icon and the Gene ral configuration window will pop-up. You can see basic print server information in this pag e. You also can c onfigure t he “Server Na me”, “User Na me” and “Password” here.
72 7.6 TCP/IP Configuration Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up. You can configure the print se rver to autom a tically get IP from DHCP server or m a nually specify static IP. The print server also has a bui lt-in DHCP server.
73 Click the “IP” bu tton to en ter the IP setting page. If you need the print serv er to automaticall y get an IP f rom DHCP server, select “Auto IP”. You also can select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the print server.
74 7.7 Netware Print Server Configuration Double Click “NetW are” icon and the NetWare configuration window will pop-up. This print server supports NetWare Bindery Printing method. The print server pe riodically polls the NetWare server printer queue s for printi ng jobs.
75 7.8 AppleTalk Configuration Double Click “AppleTalk” icon and the AppleTalk configuration window will pop-up. AppleTalk is a data communica tion protocol of ten used by Macintoshes. The print server can use these param eters to join the Ap pleTalk netwo rk and share the printer to other AppleTalk workstations.
76 7.9 SNMP Co nfigur ation Double Click “SNMP” icon and the SNMP configuration window will pop up. Contact: You ca n enter the print server administrator’s contact information here. This information will b e displayed in the SNMP ma nagement tool.
77 7.10 SMB Configuration SMB Group Name , the name of SMB group that this print server belongs to. All PC should join the same group befo re they can use thi s pr int server by SMB protocol.
78 7.11 System Configuration Double Click “System” icon a nd the System configuration window will pop-up. In the System configurati on page, you can select to enable/disable eac h printin g or management pr otocol, upgrade the new f irmwar e for this pri nt serve r, and load factory defaults to the pr int server.
79 7.12 Wizard Click “Wiz ard” icon on t he tool bar, the setup wizard item of the current se lected print server will be showed on the right side of the window. Double click the “Print S erver Setup Wizard” the setup wizard will guide you throug h all the setup process.
80 Step 1: Set up the name of this print server. Step 2: Select to enable re quired print ing protocol. Please refer to section 7.11 for det ail information.
81 Step 3 : Setup the I P of th is print se rver and the DHCP server. Please refer to section 7.6 for detai l information. Step 4: Setup the AppleTalk printing.
82 Step 5: Setup the NetWare printing. Please refer to section 7.7 for de tail information. Step 6 : Click “S ave” to fi nish setting. Please reboot the print server to let th ese settings ta ke eff ect.
83 7.13 Report Click “Report” icon on the tool bar, the Report window will pop up. The report lists basic inf orm ation of all available prin t servers on the network. The in f orm ation incl udes Dev ice Name, MAC ID, Model Type and Firm ware Version of the print server.
84 8. W e b Management.
85 8.1 Introduction Print server can be configur ed and managed on the Web. Through Local Area Networ k, or even Internet, administrator can easily co nfigure and mana ge print server’s vari ous main func tions in brow sers.
86 8.2 Login You may use any Web Browse r to review the status or configure the settings of the pr int server. Afte r entering the IP address of the pr int server, a login page display. You have to ente r correct “Use r Name” and “P assword ” before going to the Web Ma nagement pages.
87 8.3 Device Status 8.3.1 Sy stem System Inform ation i ncludes “ Devic e Nam e”, “Pr int Server Name”, “Model Type”, “Firmware Version”, “MAC Address” and the protocol s enabled status, etc.
88 8.3.2 Printer This page lists inform ation of p rinter c onnected to the printer port..
89 8.3.3 TCP/IP This page lis ts all TCP/IP se ttings of th e print server including “IP Address”, “Subne t Mask” and “ Gateway”. It also lists DH CP serve r settin g.
90 8.3.4 SMB This page li sts the SMB grou p and the pass job interval time settings of the print server..
91 8.3.5 SNMP This pag e lists the SNMP sett ings of the print se rver. It includes the settings of “S NMP System Contact” and “SNMP System Location”.
92 8.3.6 NetWare This pa ge lists NetWar e settings, includ ing “P olling Time”, “Use Bindery Mode”, “N ame of the File Server” and “Port Attached Queue”.
93 8.3.7 AppleTalk This page lists AppleT alk settings, including “AppleTalk Zone Na me” and “P rinter Type” of the printer connected to the print port.
94 8.4 Setup Wizard 8.4.1 Sy stem You can change the print se rver name and passw ord of the print s erver from here. Print Server Name , the name of the print se rver. You can use thi s name to iden tify the prin t serve r whe n yo u are searching for the p rint server by the admi nistra tion and client utilities.
95 8.4.1.1 Advanced Settings You can enable/disable the pr inting protoc ols from the screen. To enable th e function, please selec t “Enable”; to disable the function, pl ease select “Disable”.
96 8.4.2 TCP/IP You can configure the print se rver to autom a tically get IP from DHCP server or m a nually specify static IP. The print server also has a bu ilt-in DHCP server.
97 “Start IP”, “Ran ge”, “DNS”, “Subnet Mask” and “Gateway”, and the print server will assign a unique IP for each client. Note that when “Auto” is se lected, the DHCP Server of the print server will be enabled only when there is no other DHCP Server within the netwo rk.
98 printer is interrupted unexpect edly because of paper out or off li ne. 8.4.4 SNMP The print server s upports SNMP configur ation. If it is enabled, please set up the following parameters. SNMP System Contact: You can enter the print server administrator’s contact information here.
99 8.4.5 NetWare This print server supports NetWare Bindery Printing method. The print server pe riodically polls the NetWare server printer queue s for printi ng jobs. You have to assign the NetWare server name, print server polling interval and the name of queue on the NetW are server for each printer port.
100 8.4.6 AppleTalk AppleTalk is a data communica tion protocol of ten used by Macintoshes. The print server can use these param eters to join the Ap pleTalk netwo rk and share the printer to other AppleTalk worksta tions.
101 Printer Type , the type of printe r attached to each printer port. You c an get th e printer type from the manuf acturer of t he printer. 8.4.7 S ave Settings You can click the “Save Setti ngs” to save the se ttings and restart the system.
102 8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory default settings. All of your previous se tup will be cleared..
103 8.5.2 Upgrade Firm ware from Br owser You can upgrade new f i rmware for this pr int server i n this pa ge. Cli ck “Brows e” to s elect the new firmwa re in your storage and then click “OK”, the firmware will be updated in several minutes.
104 9. IPP Printing.
105 9.1 Introduction IPP (Internet Printing Prot ocol) Printing provides a convenient way of re mote printing service b y TCP/IP. The print server can support IPP printing by default. It is needless to do any se tting. An y PC that can support IPP printing, for example Windows 2000/XP, can dir ectly uses the print server by IP.
106 9.2 System Setup 9.2.1 Print Server Side It is needless to do any sett ing on the print serv er side. Make sure the print server ha s correct IP settings. If you want to share the printers to In ternet users , you have to set a real IP to the print server.
107 Step3. The “Add Printer Wizard” is displayed. Click “Nex t”. Step4. Sele ct “A network printer, o r a printer attache d to another co mputer”.
108 Step5. Select “Connect to a printer on th e Internet or on a home or office network” and enter the URL of print server. The URL format is “http:/ /IP:631/Po rt Name”. The I P should be the print server’s IP. The number 631 i s IPP standard port n umber.
109 Step6. Select a suitable printer manufacturer and the printer model and clic k “N ext”. If your printer is not in the list, click “Have D isk…” to install the driver of the printer. Af ter installation, the printer model will be added to the list.
110 Step8. You have added th e network printer to the PC successf ully. The inf o rmation of the print er is displayed in the wind ows. Click “Finish”.
111 10. Windows XP SP2 Setup In Windows XP SP2, XP SP2’s firewall wo uld block the unknown communications . Th is prin t server ha s allowe d the communicati ons data pa ssed through the XP SP2’s firewall.
112 Step3. Select “Advanced ” tab and clic k “Settings…”..
113 Step4. Se lect “Excepti ons” tab and click “Add Program…”..
114 Step5. Click “Browse” to add a new program. Step6. Open the “NPUt il” file from “C:Program FilesPrintServe r Utiliti es” (wher e C: is the system drive).
115 Step7. A new program “Network Ports Quick Setup” is displayed in the list, cli ck “Ok”..
116 Step8. Click “Ok”. You ha ve completed the setting. The Window s XP SP2 will allow the inco ming network connect ions activated by th e program.
Ein wichtiger Punkt beim Kauf des Geräts Intellinet 521475 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Intellinet 521475 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Intellinet 521475 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Intellinet 521475 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Intellinet 521475 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Intellinet 521475 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Intellinet 521475 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Intellinet 521475. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Intellinet 521475 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
