Benutzeranleitung / Produktwartung DS-7216HWI-SH des Produzenten Hikvision
Zur Seite of 187
Digit al V ideo R ec or der U ser Manual UD.6L0202D1 307A01.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 Hikvision® Network Digital V ideo Recorder User ’ s Man ual This manual, a s well as the software described in it, is furnished under license and may b e use d or copie d on ly in accordance with the terms o f such license.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 2 Regulator y informa tion FCC infor mation FCC compliance : This equipment has been tested and found to com ply with the limits for a digital device, pursuant to part 15 of the FCC Rules.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 3 Thank you for purchasing our product. If th ere is any q uestion or request, please do not hesitate to contact dealer .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 4 Preventive and Ca utionary Tips Before connecting and operating y our device, please be advised of the following tips: • Ensure unit is installed in a well-ventilated, dust-free environment.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 5 Product Ke y Features General P AL/NTSC adaptive video inputs. H.264 video compression with high reliability and superior def inition.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 6 Normal and event video encoding param eters. Multiple recording types: manual, normal, motion, alarm, motion/alarm and motion & alarm .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 7 and iSCSI are supported. TCP , UDP and R TP f or unicast. Remote search, playback, d ownload, lo cking and unlocking of the record files, and downloading files broken transfer resume.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 8 T ABLE OF CONTENTS Product K ey Feat ures ......................................................................................................... 5 C H A P T E R 1 ..............
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 9 5.6 Configuri ng Holiday Record ...................................................................................... 65 5.7 Configuri ng Redundant Record ........................
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 10 9.2.7 Configuri ng Multi cast ................................................................................... 133 9.2.8 Configuri ng RTSP .....................................
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 11 13.1 Configuri ng General Settings ................................................................................. 174 13.2 Configuri ng RS-232 Se rial Port ....................
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 12 C H A P T E R 1 Introduction.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 13 1.1 Fr ont Panel DS -7200-SH and DS-7200HVI-SV: The front panel of DS-7200-SH/SV series DVR is shown in Figure 1.1: Figure 1.1 Fr ont Panel of DS- 7200 -SH/SV T abl e 1.1 Description of Cont rol Panel But tons No.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 14 No. Name Function Description ST A TUS Indicator turns green when DVR is controlled by an IR remote control with the address fro.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 15 No. Name Function Description 9WXYZ/PREV Enter numeral “9”; Enter letters “WXYZ”; Multi-camera display in live view; In Playback mode or Menu Playback T ag playback interface, this bu tton can be used to delete the selected tag.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 16 T abl e 1. 3 Description of Cont rol P a nel But tons No. Name Function Description 1 POWER ON/OFF Power on/off sw itch. 2 IR Receiver Receiver for IR remote control. 3 USB Connect to USB mouse or USB flash mem ory devices.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 17 No. Name Function Description in menus. In Playback mode, the Up and Down button is used to speed up and slow down recorded video.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 18 1.2 IR Remote Contr ol Operations The device may also be controlled with the included IR rem ote contro l, shown in Figure 1.4. Note: Batteries (2× AAA) must be installed before operation.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 19 No. Name Description 7 PLAY Button Entering the All-day Playback menu. 8 INFO Button Reserved. 9 VOIP/MON Button Selecting all items on the list ; In live view or p layback mode, it can be u sed to switch between main and auxiliary video output.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 20 1.3 USB Mouse Oper ation A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this device. To use a USB mouse: 1. P lug USB mouse into one of the USB interf aces on the front panel of the device.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 21 1.5 Rear Panel DS -7204HVI/HFI/HWI-SH, DS -7204HVI- SV and DS -7204HWI-SV: The rear panel of 7204HVI/HFI/HWI-SH, DS -7204HVI-SV and DS -7204 HWI- SV DVR is shown in Figure 1. 6. Figure 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 22 T abl e 1.7 Description of R ear Panel No. Item Description 1 VIDEO IN BNC connector for analog video input. 2 VIDEO OUT BNC connector for video output. 3 USB Interface Connects USB mouse or USB flash mem ory devices.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 23 Figure 1. 10 Rear P anel of DS -7 316 HFI- SH and DS - 7316 HWI- SH Note: The rear p anel o f DS-73 04HFI-SH/DS-7304HWI-SH provides 4 video inpu t interface s, and th e rear panel of DS-7308HFI-SH/DS-7308HWI-SH provides 8 video input interfaces.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 24 T abl e 1. 10 Descrip t ion of Rear P anel No. Item Description 1 MAIN VIDEO O UT BNC connector for video output. SPOT V IDEO OUT BNC connector for spot video output. 2 VIDEO IN BNC connector for analog video input.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 25 T abl e 1. 11 Descrip t ion of Rear P anel No. Item Description 1 VIDEO IN BNC connector for analog video input. 2 MAIN VIDEO OUT BNC connector for video output. SPOT V IDEO OUT BNC connector for spot video output.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 26 1.6 S tartin g Up and Shutting Down the Device Purpose: Proper startup and shutdown procedures are crucial to expanding th e life of the d evice.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 27 C H A P T E R 2 Getting Started.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 28 The Setup Wizard can walk you through some important settings of the d evice. By de fault, the Setup Wizard starts once the device has loaded. Operating the Setup Wizard: 1. Select the sy stem resolution from the drop -down menu.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 29 Figure 2.3 Login W ind ow 4. Click the Next button to enter the Date and Time settings windo w, as shown in Figure 2.4. Set the time zone, date format, system date and sy stem time.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 30 Figure 2.5 Net work Configurat ion Note: The DS-7204/7208/7216-SH/SV/SL models provide one 10M/100Mbps self-adaptive network int.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 31 Figure 2.7 Record Set t ings 4) Click Cop y to copy th e record settings of the current camera to other camera (s) if needed, as shown in Figure 2.8. Figure 2.8 Copy Re cord Set t i ngs 5) Click OK to return to the Record Settings window.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 32 C H A P T E R 3 Live View.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 33 3.1 Intr oduction of Live V iew Live view shows you the video imag e getting from each camera in real time.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 34 3.2 Operations in Live V iew Mode In live view mode, the following functions can be realized: • Single Screen : showing only one screen on the monitor. • Multi-screen: showing multiple screens on the monitor simultaneously.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 35 Figure 3.1 Right -click Menu T abl e 3.3 Mouse Oper at ion in Live V iew Name Description Menu Enter the main menu of the system by right-clicking the mouse. Single Screen Switch to the single full screen by choosing channel num ber from the dropdown list.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 36 3.2. 4 Main/Aux O utput Switching When the HDMI/VGA ou tput is configured as th e main output, you c an perform the following operation to switch to CVBS output as the main output.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 37 Instant Playback Instant Playback only shows the record in last five minutes. If no record is found, it means there is no record during the last five minutes. Digital Z oom Digital Zoom can zoom in the selected area to the full screen.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 38 Figure 3.5 Image Sett ings 3. Adjust th e image parameters including the brightness, contrast, saturation, hue, sharpness level and denoising level by moving the sliding bar or increasing/decreasing the value.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 39 3.3 Configuring Live V iew Settings Purpose: Live View settings can be customized according to different needs. You can configure the output interf ace, dwell time for screen to be shown, m ute or turning on the audio, the screen number for each channel, etc.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 40 Note: The Spot Output 1 is provided for DS- 73 00 -SH and DS- 81 00 -SH models. • Fu ll Screen Monitoring Dwell Time: The time in seconds to show alarm event screen. 2. Setting Camera Order Figure 3.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 41 3.4 Channel-zer o Encoding Purpose: Sometimes you n eed to get a remote view of many ch annels in rea l tim e f rom web browser .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 42 3.5 User Logout Purpose: After lo gging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password to log in again.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 43 C H A P T E R 4 PTZ Controls.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 44 4.1 Configuring PTZ Settings Purpose: Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before you control the PTZ camera. Before you start: Check that the PTZ and the device are connected properly through RS-485 interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 45 Menu>Camera>PTZ>More Settings Figure 4.2 PTZ- More Set tings 2. Us e the directional button to wheel the camera to the locatio n where you want to set preset. 3. Click the round icon before Save Preset .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 46 Figure 4.4 PTZ- Cal l Preset 3. Choo se the preset num ber. Call preset in live view mode: S teps: 1. Click the PTZ Control icon in the quick setting bar to enter the PTZ setting menu in live view mode.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 47 moving on to the next key point. The key points are correspo nding to the presets. T he presets can be set following the steps above in Customizing Preset s . Steps: 1. Enter th e PTZ Control interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 48 Figure 4.8 Ke yPoint s Del et io n 4.2.4 Calling Patro ls Purpose: Calling a patrol makes the PTZ to move accordin g the predefined patrol path. Call patrol in the PTZ setting inte rface: Steps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 49 1. Press PTZ control on the IR rem ote, or click PTZ Control icon on the quick setting toolbar , to show the PTZ control toolbar . 2. Choose Patrol on the control bar . 3. Click the patrol you want to call.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 50 under the image to move the PTZ cam era. The movement of the PTZ is recorded as the pattern.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 51 4.3 PTZ Contr ol T oolbar In th e Live V iew mode, you can press the PTZ Control b utton on th e IR remote control, or choose th e P TZ Control icon to enter the PTZ toolbar . Figure 4.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 52 C H A P T E R 5 Record Settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 53 5.1 Configuring Encodin g Parameters Purpose: By configuring the encoding parameters you can define the transmission stream type, the resolution and so on. Before you st art: 1. Make sure that the HDD has already b een installed.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 54 Figure 5.3 Encoding P arameters-Main S t ream 2. Set encod ing parame ters for main stream 1) Select Record to enter th e main stream settings interface. 2) Select the camera for configuration.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 55 • Expired Tim e (d ay) : The expired time is the lo ngest ti me for a record file to b e kept in th e HDD, if the deadline is reached, the file will be d eleted. Y ou can set the expired time to 0, and then the file will no t be deleted.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 56 2) Configure the parameters for the sub -stream. Refer to the step of main stream settings. 3) Click Apply to save the settings. Note: Y ou can click the Restore b utton to restore th e current sub -stream settings to th e default parameters.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 57 Figure 5.7 Edit Sched ul e 5) T o arrange other schedule, leave the All Day checkbox blank and set the Start/End time and T ype . Note: Up to 8 periods can be configured for each day .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 58 T ask 2: Draw the Schedule S teps: 1) Click the icon on the right to select a record type . Different recording types are available for diff erent models. DS -7204/7208/7216 – SH, DS-7200-SV and DS-7200HWI- SL : Normal and Motion.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 59 5.3 Configuring M otion Detection Record Purpose: Follow th e steps to set th e motion d etection parameters. In the live view mode, on ce a motion detection event takes place, the device can analyze it and perform so me respo nse actions to handle it.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 60 4) Click Handling , and the message box for channel inform ation will pop up. Figure 5. 14 Motion Detect io n Handling 5) Select the channels which you w ant the motion detection event to trigger recording.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 61 4) Set the T ype as Motion . 5) T o schedule an a ll -day recording, check the checkbox after the All Day item. Figure 5. 17 Edit Sched ul e- All Day 6) T o arrange other schedule, leave the All Day checkbox blank and set the Start/En d time.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 62 S teps: 1. En ter the Alarm setting interface. Menu> Configuration> Alarm Figure 5. 20 Alarm S ettings 2. Click Alar m Input tab. Figure 5. 21 Alarm S ettings- Al arm Input 1) Select Alarm Input No .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 63 9) Click Apply in the Alarm Input interface to save the settings. Repeat the above steps to configure other alarm input parameters. If the setting can also be applied to other alarm inputs, click Copy and choose the alarm input number .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 64 5. 5 Configuri ng Manual Record Purpose: Follow the steps to set parameters for the m anual record . When usin g manual record, you need to manu ally cancel the record. The m anual recording is prior to the scheduled recording.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 65 5. 6 Configuri ng Holiday Record Purpose: Y ou may wa nt to have different plan for recording on holiday . Follow the steps to configure the record schedule on holiday . S teps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 66 5) Click Apply to save settings. 6) Click OK to exit the Edit interface. 4. En ter Record Schedule settings interface. Menu> Record> Schedule 1) Select Record. 2) Check the checkbox after Enable Schedule .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 67 5. 7 Configuri ng Redundant Rec ord Purpose: Enabling redundant record ing, wh ich means saving the record files not only in the R/W (read/write) HDD but also in the redundant HDD, will eff ectively enhance the data safety and reliability .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 68 Figure 5. 32 Encoding R ecord 2) Select Ca mera you want to configure. 3) Ch eck the checkbox of the Redundant Record . N otes: 1. The Redundant Re cord op tion is only a vailable when the HDD mode is Group.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 69 5. 8 Configuri ng HDD Gr oup for Record Purpose: Y ou can group the HDDs and save the record files in certain HDD group. S teps: 1. En ter HDD setting interfac e. Menu>HDD Figure 5.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 70 5. 9 Files Pr otection Purpose: Y ou can lock the recorded files or set the HDD p roperty to Read-only to p rotect the recor d f iles fro m being overwritten. Protec t file by locking the reco rd files: S teps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 71 Note: The record files of which the recording is still not com pleted can’t be locked.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 72 Note: If there is only one HDD and is set to Read-only , th e d evice ca n’t record any f iles. On ly live vie w mode is available. If y ou set t he HDD to Read-only w hen the device is sav ing files in it, then the file will be saved in next R/W HDD.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 73 C H A P T E R 6 Playback.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 74 6.1 Playing Bac k Record Files 6.1.1 Playing Back by Cha nnel Purpose: Play back the recorded video files of a spec ific channel in the live view mode. Channel switch is supported.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 75 Figure 6.2 Right -c lick Menu und er Live Vie w Press PLA Y button on the I R remote control to play back record files of the channel under single-screen live view . Under multi-screen live view , reco rd files of the selected channel will be played back.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 76 Figure 6.4 All -d ay Pl ayback Interf ace with Chan nel List Dates marked in different colors: : No record files in this day . : There is record file(s) in this day (not current day).
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 77 2. A bout video type bar: represents normal recording (manual or schedule); represents event recording ; represents smart search recording. 6.1.2 Playing Back by Time Purpose: Play back video files recorded in specif ied time duration.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 78 Figure 6.7 V id eo Search by Time In the Playback interface: The toolbar in the bottom part of Playback interface can be used to control playing process, as shown in Figure 6.8 and Figure 6.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 79 T abl e 6.2 Detailed Explanati on of Playback - by - time Toolbar Button Operation Button Operation Button Operation Button Oper.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 80 2. Choose a record file you want to play back. If th ere is o nly o ne channel in the search result, clicking bu tton takes you to Full-scree n Playback interface of this channel.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 81 Figure 6. 13 4-ch Synchronous Pl ayb ack Interface The hidden list of recorded files display s by moving the mouse to the right of the playback interface. Figure 6. 14 4-ch Synchronous Pl ayb ack Interface with V i d eo List Figure 6.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 82 play Previous file Next file V ideo search Exit Hide toolbar Progress bar V ideo type bar Note: 1. Playback progress bar: use th e mouse to click a ny point of the progress bar or drag the p rogress bar to locate special frames.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 83 for the alarm triggered record files. 6. Click Search button to enter the Search Result interface. Figure 6.18 Sear ch Resul t of Alarm I nput Figure 6. 19 Search Resul t of Motion Detect io n The Pre-play and post-play can be con figured.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 84 Figure 6. 20 Ev ent Det ail s Or you can d irectly click th e button of each file item to enter its playback interface . The toolbar in the bottom part of Playback interface can be used to control playing process.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 85 Figure 6. 22 Interface of Pl ayback b y Ev ent (2) Figure 6. 23 T oolbar of Pl ayback by Ev ent T abl e 6.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 86 6.1.5 Playing Back by T ag Purpose: Video tag allows you to record related inform ation like people and location of a certain time point during playback. You are also allowed to use video tag(s) to search for record files and position time point.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 87 Steps: 1. Enter Playback interface. Menu>Playback Click Tag tab to enter Playback by Tag interface. Choose channels, tag type and time, and click Search to enter Search Result interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 88 Figure 6. 28 Interface of Pl ayback b y T ag The hidden list of tags will be display ed by moving the mouse to the right of the playback interface. Figure 6. 29 Interface of Pl ayback by T ag with V id eo List Figure 6.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 89 management / Pause reverse play/Reverse play/ Single-frame reverse play / Pause play/Play/Single-frame play Stop Speed up Previous tag Next tag T ag search Exit Hide Progress bar V ideo type bar Notes: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 90 Figure 6. 32 Resul t of Sy stem Log Sear ch 3. Choose a log with record file and click button to enter Playback interf ace. Note: If there is no record file at the tim e point of the log, the message box “ No result found ” will pop up.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 91 6.2 Auxiliary Functions of Playback 6.2.1 Playing Back Frame by Frame Purpose: Play video files frame by frame, in order to check im age details of the video when abnormal events happen.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 92 Figure 6. 34 Pl ayback Interface 2. Right-click mouse and select S mart Sea rch to go to an alysis are a selection in terface . Fi gur e 6. 35 Right -click Menu in All -d ay Pl ayback and Norma l Pl ay back Interface 3.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 93 Different video type bars are marked in different colors: : Normal record file; : Event record file; : Smart search reco rd file. The hidden list of record files display when moving the mouse to the right of the playback interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 94 6.2.3 Digital Zoom Steps: 1. Right click the mouse on a channel under playback and choo se Digital Zoom to enter Digital Zoom interface. 2. Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 95 C H A P T E R 7 Backup.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 96 7.1 Backing up Rec ord Files Before you st art: Please insert the backup device(s) into the device. 7.1.1 Quick Export Purpose: Export record files to backup device(s) quickly. Steps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 97 Figure 7.2 Quick Expo rt using USB1-1 3. In the Export interface, choose backup device and click Export button to start exporting. Note: Here we use USB Flash Drive and please refe r to the n ext section Normal Backup for more backup devices supported by the device.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 98 7.1.2 Backing up b y Normal Video Se arch Purpose: The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB writer) , SA T A writer or eSA T A H DD .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 99 Figure 7.6 Resul t of Normal V id eo Search for Backup 4. Export the record files. Click Export button and start backup. Note: If the inserted device is not recognized: • Click the Refresh button.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 100 Figure 7. 8 Export by Normal V id eo Search using USB Writer Stay in the Exporting interface until all record f iles are exported with pop - up message box “Export finished ”.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 101 Figure 7. 11 Checkup of Export Resul t using USB Writer 7.1.3 Backing up by Event Sea rch Purpose: Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), S ATA writer or eSATA HDD.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 102 Figure 7.13 Resul t of Ev ent Search 6. Select record files to export. Yo u ca n use the following two ways to enter the Export interf ace. Select motion detection event (s) from the list and click Quick Export button to enter the Export in terface, as shown in Figure 7.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 103 You can also format USB flash drive or USB HDDs via the device. Figure 7. 15 Export by Eve nt U sing USB Fl ash Driv e Stay in the Exporting interface until all record f iles are exported with pop - up message “Export finished ”.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 104 7.1.4 Backing up Video Clips Purpose: You may also select video clips to export directly during P layback, using USB devices (USB flash drives, USB HDDs, USB writer), SATA writer or eSATA HDD.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 105 Figure 7. 20 Export V id eo Cl ips U sin g USB Fl ash Driv e Stay in th e Exporting interface until all record files are exported with pop - up message “Export finished ”. Figure 7.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 106 7. 2 Managin g Backup Devic es Management of USB flash drive , USB HDD and eSATA HDD. Note: The eSATA HDD is supported by DS-7300-SH and DS-8100-SH models only. 1. En ter Search Result interface of record files.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 107 3. Backup d evice management. Click New Folder button if you wa nt to create a new folder in the backup devic e. Select a record file or folder in the backup device and click button if you want to delete it.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 108 Figure 7. 26 Normal V id eo S earch for Backup 2. Select record files you want to back up. Click Export button to enter Export interface . Note: At least one record file shall be selected.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 109 • Check for compatibility f rom vendor. Figure 7. 28 USB W riter Management.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 10 C H A P T E R 8 Alarm Settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 111 8.1 Setting Moti on Detection Steps: 1. Enter Motion Detection interface and choose a camera you want to set m otion detection. Menu> Camera> Motion Figure 8.1 Motion Detect ion Set up Interface 2.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 12 4. Set up arming schedule of the channel. 1) Select Arming Schedule tab to set the channel’s arming schedule. 2) Choose one day of a week a nd up to eight time periods can b e set w ithin each day.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 13 Figure 8.6 Copy Set tings of Mot ion Detection.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 14 8.2 Setting Se nsor Alarms Note: This section is available for DS -7224/7232-SH, DS -7300- SH and DS -8100- SH models only . Purpose: You can s et handling method of an external sensor alarm.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 15 Figure 8.9 Set Ar ming Schedul e of Alarm Input 6. If necessary, select PTZ Linking tab and set PTZ linkage of the alarm input. Set PTZ linking parameters and click Apply to save the settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 16 Figure 8. 11 Copy Settings of Alarm Input.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 17 8. 3 Detec ting V ideo Loss Purpose: Detect video loss of a channel and take alarm response action(s). Steps: 1. Enter Video Loss interface of Camera Management. Menu> Camera> Video Loss Figure 8.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 18 8. 4 Detec ting V ideo T ampering Purpose: Trigger alarm when the lens is covered and take alarm response action(s). Steps: 1. Enter Video Tampering interface of Camera Management.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 19 8. 5 Handl ing Exceptions Purpose: Exception settings refer to the handling m ethod o f various exce ptions, e.g., • HDD Fu ll: The HDD is full. • HDD Error : Writing HDD error, unformatted HDD, etc.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 120 8. 6 Settin g Alarm Response Actions Purpose: The alarm response actions will be activated when an exception occurs, including Full Screen Monitoring, Audible Warning, Notify Surveillance Center, an d Send Email.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 121 Figure 8. 17 Alarm Ou tput Settings I nterface 2. Set arming schedule of the alarm output. Click to set th e arming s chedule of alarm o utput. Choose o ne day o f a week and up to 8 ti me periods can be set within each day .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 122 8.7 T riggering or Clearin g Alarm Output Manually Note: This section is available for DS -7224 -7232-SH, DS -7300- SH and DS-8100- SH m odels only . Purpose: Sensor alarm can be triggered or cleared manually.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 123 C H A P T E R 9 Network Settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 124 9.1 Configuring Gener al Settings Purpose: Network settings must be properly configured before you operate device over network. S teps (for DS-7200-SH/SV/SL and DS-7300-SH): 1. Enter th e Network Settings interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 125 S teps (for DS-8100-SH): 1. Enter th e Network Settings interface. Menu > Configuration > Network 2.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 126 Figure 9.5 Load Bal ance Work ing Mode Net Fault-tolerance Mode: The two NIC cards use the same IP address, and you can select the Main NIC to LAN1 or LAN2.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 127 Figure 9.7 PPPoE Set t ings In terface 3. Ch eck the PPPoE checkbox to enable this feature. 4. En ter User Name and Password for PPPoE access. Note: The User Name and Password should be assigned by y our ISP.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 128 Figure 9. 10 IPServer Set tings Interface • DynDNS: 1) Enter Server Address for DynDNS (e.g. mem bers.dyndns.o rg). 2) In the Device Domain Name text field, enter the domain obtained from the Dy nDNS website.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 129 • hk DDNS : You n eed to enter the Server Address and Device Domain Nam e for hk DDNS, and other fields are read only. 1) Enter the Server Address of the hk DDNS server: www.hik-online.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 130 Figure 9.16 Re gister the Dev ice Note: Only lower-case English alphabet, numeric and ‘ - ’ can be used in the alias of the device and the alias must be started with letters of the lower-case English alphabet.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 131 Purpose: Y ou can use SNMP protocol to get device status and param eters related information. S teps: 1. En ter the Network Settings interface. Menu > Configuration > Network 2.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 132 Menu > Configuration > Network 2. Select the UPnP ™ tab to enter the UPnP ™ in terface. Figure 9. 20 UPnP ™ Set tings Interf ace 3. Check checkbox to enable UPnP ™ .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 133 9.2.6 Configuring Remote Alarm Host Purpose: W ith a remote alarm host co nfigured, the device will send the alarm event or exception message to the host when an alar m is triggered.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 134 multicast address must be the same as the device ’s multicast IP. Figure 9. 25 Configure Mult ica st 4.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 135 Figure 9. 27 Host/Others S et tings Menu 4. En ter the Server Port and HTTP Port in the text f ields. The default Server Port is 8000 and the HTTP Port is 80, and you can change them according to different requirem ents.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 136 Figure 9. 29 Email Settings Interface 5. Co nfigure the following Em ail settings: Enable Server Authentication (optional): Check th e checkbox to enable the server authentication feature.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 137 6. Click the Apply bu tton to save the Ema il settings. 7. You can click the Test button to test w hether your Email settings work. The corresponding Attention message box will pop up.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 138 9.3 Checking Network T raffic Purpose: Y ou can check th e network traffic to obtain real-time in formation o f device su ch as linking status, MTU, sending/receiving rate, etc. S teps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 139 9.4 Network Detec tion Purpose: Y ou can obtain network connecting status of device through the netwo rk detection function, including network delay , packet loss, etc. 9.4.1 Testing Net work Delay an d Packet Loss S teps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 140 3. Select the backup device from the dropdown list of Device Name. Note: Click the Refresh butt on if the connected l ocal backup device cannot be displaye d. When it fails to detect the backup device, please check whether it is compatible with the device.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 141 Figure 9. 37 Checking N et work St at us If the network is normal the following message box pops out.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 142 9.4.4 Checking Network Stati stics Purpose : Y ou can check the network statistics to obtain the real-time information of the device. S teps: 1. Enter th e Network Statistics interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 143 C H A P T E R 1 0 HDD Management.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 144 10.1 Initializ ing HDDs Purpose: A newly installed hard disk drive (HDD) must be initialized before it can be used w ith your device. S teps: 1. En ter the HDD Informa tion interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 145 Figure 10.3 HDD S t at us Changes to Norma l Note: Initializing the HDD will erase all data on it.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 146 10.2 Managin g Network HDD Purpose: You can add the allocated NAS or disk of I P SAN to device, and use it as network HDD. S teps: 1. Enter th e HDD Inform ation in terface. Menu > HDD > General Figure 10.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 147 5. Co nfigure the NAS or IP SAN se ttings. • Add NAS disk: 1) Enter the NetHDD IP address in the text field. 2) Enter the NetHDD Directory in the text field. 3) Click the OK button to add the configured NAS disk.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 148 Note: If the added NetHDD is uninitialized, please select it and click the Init button for initialization.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 149 10.3 Managin g HDD Gr oup 10. 3.1 Setti ng HDD Groups Purpose: Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD group through HDD settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 150 Figure 10. 11 Local HDD Set tings Interf ace 7. Select th e Group number for the current HDD. Note: The default group No. for eac h HDD is 1. 8. Click the OK button to confirm the settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 151 Figure 10. 13 Set HD D Propert y 3. Set th e HDD property to R/W, Read-only or Redundancy. 4. Click the OK button to save the settings and exit the interface. 5. In the HDD Inform ation menu, the HDD property will be displaye d in the list.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 152 10.4 Configuring Quo ta Mode Purpo se Each camera can be configured with allocated quota for the storage of recorded files. S teps 1. En ter the Storage Mode interfa ce. Menu > HDD > Advanced 2.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 153 Analog to select all cameras. 6. Click the OK button to finish the Copy settings and back to the Sto rage Mode interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 154 10.5 Checking HD D S tatus Purpose: You may check the status of the installed HDDs on device so as to take imme diate check and maintenance in case of HDD failure. Checking HDD S tatus in HDD Infor ma ti on Interface S teps: 1.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 155 10.6 Checking S. M.A.R.T . Information Purpose: The S.M.A.R.T . ( Self-Monito ring, Analysis and Reporting T echnology ) is a monitoring system for HDD to detect a nd report on various indicators o f reliability in the hopes of anticipating failures.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 156 10.7 Detecting B ad Sect or Purpose: The bad sectors of a HDD may cause the system to slo w d own when reading or writing data. Y ou can detect the bad sectors of the HDD and thus to take immediate measures to repair it.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 157 10.8 Configuring HD D Err or Alarm s Purpose: Y ou can configure the HDD error alarms when the HDD status is Uninitiali zed or Abnormal . S teps: 1. En ter the Exception interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 158 C H A P T E R 1 1 Camera Settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 159 1 1.1 Configuring OSD Settin gs Purpose: Y ou can configure the OSD (On-screen Display) settings for the camera , including date /time, camera name, etc. S teps: 1. Enter th e OSD Config uration interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 160 1 1.2 Configuring Privacy Mask Purpose: Y ou are allowed to configure the four-sided privacy mask zones that cannot be viewed by the operator . S teps: 1. Enter th e Privacy Mask Settings interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 161 1 1.3 Configuring V ideo Parameters S teps: 1. Enter th e Imag e Settings interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 162 C H A P T E R 1 2 Device Managemen t and Maintenance.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 163 12.1 V iewin g System Informati on 12.1.1 Viewing De vice Information S teps: 1. Enter th e Sy stem Information interface. Menu > Maintenance > System Info 2. Click the Device Info tab to enter the Device Information menu to view the device name , model, serial No.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 164 12.1.3 Viewing Re cord Information S teps: 1. Enter th e Sy stem Information interface. Menu > Maintenance > System Info 2. Click the Reco rd tab to enter the Record Informa tion menu to view the recording status and encoding parameters of each came ra.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 165 12.1.5 Viewing Network Information S teps: 1. Enter th e Sy stem Information interface. Menu > Maintenance > S ystem Info 2. Click the Network tab to enter the Network Information menu to view the network information.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 166 12.2 Sear ching & Exporting Log Files Purpose: The operation, alarm, ex ception and inform ation of the device can be stored in log files, which ca n be viewed and exported at any time .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 167 Figure 12.8 Log Search Re sult s 5. You can click the button of each log or double click it to view its detailed informa tion. And you can also click the button to view the related video files if available.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 168 Figure 12. 10 Log Ex port Interface (2) Chec k ch eckbox to select the HDD and click Export to enter the export interface. Figure 12. 11 Export Log Fil es 7. Select the backup device from the dropdown list of Device Name .
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 169 Figure 12. 12 Import/Expo rt Config Fil e 2. Click the Export button to export configuration files to the selected local backup device. 3. To import a configuration file, select the file f rom the selected backup device and click th e Impor t b utton.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 170 12.4 Upgrading S ystem Purpose: The firmware on your device can be up gr aded by local backup device or remote FTP se rver . 12.4.1 Upgrading by Loc al Backup Devi ce S teps: 1. Conn ect your device with a local backup d evice where the update firmware file is located.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 171 Figure 12. 14 FTP Upgrad e Interface 3. Enter th e FTP Server A ddress in the text field. 4. Click the Upgrade button to start upgrading. 5. After the upgrading is complete, reboot the device to activate the new firmware.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 172 12.5 Restorin g Default Settings S teps: 1. En ter the Default interface. Menu > Maintenance > Default Figure 12. 15 Restore F actory Defaul t 2. Click the OK button to restore the default settings.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 173 C H A P T E R 1 3 Others.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 174 13.1 Configuring Ge neral Settings Purpose: You can configure the BNC output standard, VGA/HDMI output resolution, mouse pointer speed, etc. S teps: 1. En ter the General Settings interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 1 75 • Transparent Channel: Connect a serial device directly to the device. The serial device will be controlled rem otely by the PC through the network. S teps: 1. Enter the RS-232 Settings interface.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 176 13.3 Configuring DST Settings Steps: 1. En ter the General Settings interface. Menu >Configuration>General 2. Ch oose DST Settings tab. Figure 13.3 DST Set tings Interface You can check the checkbox before the Auto DST Adjustment item.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 177 13.4 Configuring Mor e Settings S teps: 1. En ter the General Settings interface. Menu > Configuration > General 2. Click the M ore Settings tab to enter the More Settings interf ace.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 178 13.5 Managin g User Accounts Purpose: There is a default account in the dev ice: Admin istrator . The Administrator user name is admin and the passw ord is 12345 . The Administrator has the perm ission to add and delete user and configure user parameters.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 179 • Operator: The Operator user level has permission of Local Log Search in Local Configuration, Remote Log Search and Two-way Audio in Remote Configuration and all operating perm ission in Camera Configuration.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 180 property), upgrading system firmware, clearing I/O alarm output. • Local Shutdown /Reboot: Shutting down or rebooting the device. Remote Configuration • Remote Log Search: Remotely viewing logs that are saved on the device.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 181 Figure 13.9 Del ete a U ser 3. Click the ico n to delete the selected user. 13. 5.3 Editi ng a User S teps: 1. En ter the User Management interface. Menu > Configuration > User 2.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 182 Figure 13. 11 Edit U ser Interface 4. Ed it the user inform ation, in cluding user nam e, password, level and MAC address. 5. Click the OK button to save the settings and exit the m enu.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 183 Figure 13. 13 Change Password 3. En ter the old password, check checkbox, enter new password and confirm password on the menu. 4. Click OK to save the settings and exit the m enu.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 184 C H A P T E R 1 4 Appendix.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 185 Glossary • Dual Stream: Dual stream is a technology used to record high resolution video locally w hile transmitting a lower resolution stream ove r the n etwork.
User Manual of DS -7200-SH/SV/SL and DS-73 00 /81 00 - SH Series DVR 186 F AQ • Why does m y device make a beeping sound after booting? The possible reasons for the warning beep on the device are as follows: a) There is no HDD installed in the d evice.
Ein wichtiger Punkt beim Kauf des Geräts Hikvision DS-7216HWI-SH (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hikvision DS-7216HWI-SH noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hikvision DS-7216HWI-SH - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hikvision DS-7216HWI-SH reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hikvision DS-7216HWI-SH erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hikvision DS-7216HWI-SH besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hikvision DS-7216HWI-SH verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hikvision DS-7216HWI-SH. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hikvision DS-7216HWI-SH gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
