Benutzeranleitung / Produktwartung 4Gbit/s FC I/O Modules des Produzenten Fujitsu
Zur Seite of 40
39 E Before Reading This Manual Thank you for purchasing the PRIMERGY 4Gbit/s FC I/O Module (hereinafter referred to as this product). This manual explains the 4Gbit/s FC I/O Modules and the Fibre Channel driver (for W indows). Read this manual carefully to handle the product correctly .
40 Remarks W arning Descriptio ns V arious sym bols are used througho ut this manual. These are provided to em phasize important points for your safety and that of others. The sym bols and their meanings are as follows. Be sure to fully understand these before reading this manual.
41 E Abbrevia tions The following expressions and abbreviations are used to describe the product names used in this manu al. Safety For your safety and that of others, follow the guidelines provided on the following pages concerning the use of this product.
42 Checking the Items Supplied Check that the following items are supplied before using this product. Please contact an office listed in "Appendix B Contact Information" ( pg.
43 E Contents 1 4Gbit/s FC I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 1.2 S pecificati ons . . . . . . . . . .
44.
1 4Gbit/s FC I/O Module 45 E 1 4Gbit/s FC I/O Module This chapter explains the features and specifications of this product. 1.1 Overview This product is a Fibre Channel expansion board for use exclusively with BX620 S3 and BX620 S4 server blades.
46 1.2 Specifications This product is an expansion board used in order to install fiber channel interface on the server blade. This product has the following features: • Capable of high -speed data transfer at a m aximum rate of 4Gbps. • Y ou can place the connected device away from the ser ver .
1 4Gbit/s FC I/O Module 47 E 1.3 How to Check the Driver V ersion The following explains the procedure to check the driver version. 1 Click the "Start" button → "Settings" → "Cont rol Panel" → "Administrative T ools" → "Computer Management" in this orde r .
48 1.4 4Gbit/s FC I/O Module to ETERNUS Connections This section explains the connection of the 4Gbit/s FC I/O Module and ETERNUS. Fabric connection Connect to the ETERNUS via FC Switch Blade.
2 Installing the 4Gbit/s FC I/O M odule 49 E 2 Installing the 4Gbit/s FC I/O Module This chapter explains the installation procedure in the server blade.
50 2.1.1 Installation Position of the 4Gbit/s FC I/O Module The 4Gbit/s FC I/O Module is installed in the server blade expansion board slot. 2.1.2 Installation Procedure for the 4Gbit/s FC I/O Module 1 T urn off the server blade where the 4G bit/s FC I/O Module will be installed.
2 Installing the 4Gbit/s FC I/O M odule 51 E 5 Install the 4Gbit/s FC I/O Module. Make sure the 4Gbit/s FC I/O Module is securely on the slot. 6 Secure the 4Gbit/s FC I/O Module with the scre ws. Secure the 4Gbit/s FC I/O Module with three screws included with this product.
52 3 Connecting Cables This chapter explains points to note when connecting cabl es. CAUTION For details on how to connect the cables, refer to "SilkW orm 4016 Hardware Reference Manual" and "SilkW orm 4016 Qu ickStart Guide".
4 Installing Drivers and Utilities 53 E 4 Installing Drivers and Utilities This chapter explains the p rocedure for installing drivers and utilitie s. • For installing drivers and utility (HBAnyware) at the same time. "4.1 Automatic Installation"(pg.
54 1. Click [Next]. 2. Select "Find the best driver for the device", and click [Next]. 3. Check only "CD-ROM drive", and then click [Next]. 4. Click [Next]. 5. Click [Finish]. 7 Click [Finish]. When "System Se ttings Change" appears, click [Y es] to restart the system .
4 Installing Drivers and Utilities 55 E 4.2 Manual Installation Drivers and utilities can be manually installed using the following procedures. 4.2.1 F or Installation on Windows Server 2003 When "Welcome to the Found N ew Hardw are Wizard" appe ars during startup, click [Cancel] .
56 Installing ***** port Miniport Drive r 1 Click the "Start" button → "Administrative T ools" → "Computer Management" in this order . 2 Click [Device Manager]. 3 Select "Emulex **********" in the "SCSI and RAID controllers" or "Other devices" list and double-click it.
4 Installing Drivers and Utilities 57 E 12 Check the driver version. •F o r 3 2 B i t 5.1.30 .9 •F o r 6 4 B i t 7.1.30 .9 13 Close the board property window . When installation finishes, perform "4.2.2 Installing HBAnyware" ( pg.57) .
58 4.3 Checking and Updati ng Firmware / BootBIOS There are two methods to check and update Firmware/BootBIOS. The results will bring no difference. "4.3.1 Using LightPulse Utility / NT"(pg.58) "4.3.2 Using HBAnyware Utility"(pg.
4 Installing Drivers and Utilities 59 E 7 For the Bo otBIOS version, check the "Revision" value in "Bo ot Bios Firmware". • When the version is "1.70a3", proceed to S tep 11. • When the version is other than "1.70a3", proceed to S tep 8.
60 4.3.2 Using HBAnyware Utility This product name displayed in HBAnywar e Utility is "BX600-FC42E - 10:00:**:**:**:**:**:**". The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the stick er on each 4Gbit/s FC I/O Module.
4 Installing Drivers and Utilities 61 E 8 For the BootBIOS version , check the "BootBIOS" value in "Boot BIOS". • When the version is "1.70a3", proceed to S tep 13. • When the version is other than "1.70a3", proceed to S tep 9.
62 5 4Gbit/s FC I/O Module Details Setting This chapter explains the 4Gbit/s FC I/O Module details settings. The setting ef fects are the sa me between the settings set by double -clicking [Device.
5 4Gbit/s FC I/ O Module Details Setting 63 E 5.1 4Gbit/s FC I/O Module Setting There are two methods for this product setting . The results will bring no dif ference. "5.1.1 Using LightPulse Utility / NT"(pg.63) "5.1.2 Using HBAnyware Utility"(pg.
64 4 Select the adapter for which settings are chang ed from the adapter list on the left of the window , a nd double-click "T opology" in "P arameters". When there are two or m ore adapters, refer to "Appendix A How to Identify the Adapter" ( pg.
5 4Gbit/s FC I/ O Module Details Setting 65 E 7 Set a value in "New V alue", check "P ermanent", and click [Change]. When the settings vary for each adapter, remove the check on the "Global".
66 8 Double-click "QueueT arget" in "P a rameters". 9 Set "1" (fixed value) in "New V alue", check "Permanent", and click [Change]. 10 Double-click "LinkSpee d" in "Parameter". 11 Set a value in "New V alue", check "P ermanent", and click [Change].
5 4Gbit/s FC I/ O Module Details Setting 67 E • When T opology is 0, QueueDepth is 8, and QueueT arget is 1 for all the adapters: 13 When the settings for all adapters finishe s, select "Exit" from "File" menu, and exit LightPulse Utility/NT .
68 5.1.2 Using HBAnyware Utility This product name displayed in HBAnyware U tility/NT is "BX600FC42E - - 10:00:**:**:**:**:**:* *". The "**:**:**:**:**:**" shows the IEEE address of the 4Gbit/s FC I/O Module. Each 4Gbit/s FC I/ O Module has a unique IEEE address, which is written on the sticker on each 4Gbit/s FC I/O Module.
5 4Gbit/s FC I/ O Module Details Setting 69 E • When selected the adapter to be set and "Driver Parameters" (Individual setting for each adap ter) In the above diagram, "BX620 S3" represents a local server , and "BX600-FC42E - 10:00:00:00:C9:48:FE:0C" represents an installed 4Gbit/s FC I/O Module.
70 For ETERNUS 4000 model 300/ 500 and ETERN US8000 Specify "255". 7 Double-click "QueueT arget" in "Adapter Parameters". 8 Set "1" (fixed value) in "V alue" in "Modify Adapter Parameter", and click [Apply].
5 4Gbit/s FC I/ O Module Details Setting 71 E 5.2 Registry Setting 1 Click the "Start" button → "Run..." in this order . 2 Enter a name in "Name" as follows, and click [OK]. regedit The registry editor starts. 3 Follow the paths belo w .
72 6 Troubleshooting This chapter explains the troubleshootin g methods when this produ ct is not running properly or when error messages are display ed. 6.1 Checking the Link Status The link status connection can be checked upon system start by starting the Light Pulse BIOS Utility .
6 Troubleshooting 73 E 6.2 T r oubleshooting Check the applicable items listed below if this product does not operate correctly . If the problem is not resol ved even after taking the following measu res, contact an office listed in "Appendix B Contact Information" ( pg.
74 Appendix A How to Identify the Adapter This chapter explains h ow to identify the adapter . Each 4Gbit/s FC I/O Module has an IEEE Address. T he IEEE Address is on a sticker on the front or rear of this product. For PG-FCD201, there are two adapters and two IE EE Addresses.
Appendix B Contact Information 75 E Appendix B Contact Information • Australia: Fujitsu Australia Limited T el: +61-2-9776-4555 Fax: +61-2-9776-4556 Address: 2 Julius A venue (Cnr Delhi Road) North Ryde, Australia N.S.W . 21 13 • China: Fujitsu (China) Holdings Co.
76 • Singapore: Fujitsu Asia Pte. Ltd. T el: +65-6777-6577 Fax: +65-6771-5502 Address: 20, Science Park Road, #03-01 T eleT ech Park, Singapore Science Park I I, Singapore 1 17674 •T a i w a n : Fujitsu T aiwan Lim ited T el: +886-2-2311-225 5 Fax: +886-2-231 1-2277 Address: 19F , No.
P ● 本書の内容は、改善のため事前連絡なしに変更することがあります。 ● 本書に記載されたデータの使用に起因する、 第三者の特許権およびそ.
こ のマ ニ ュ ア ルは再生紙 を 使用 し 、 リ サ イ ク ル に配慮 し て 製本 さ れ て い ま す 。 不要に な っ た際は、 回収 ・ リ サ イ ク ル に出 .
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu 4Gbit/s FC I/O Modules (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu 4Gbit/s FC I/O Modules noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu 4Gbit/s FC I/O Modules - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu 4Gbit/s FC I/O Modules reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu 4Gbit/s FC I/O Modules erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu 4Gbit/s FC I/O Modules besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu 4Gbit/s FC I/O Modules verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu 4Gbit/s FC I/O Modules. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu 4Gbit/s FC I/O Modules gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
