Benutzeranleitung / Produktwartung XONE:4D des Produzenten Allen & Heath
Zur Seite of 48
Allen & Heath XONE:4D User Guide USER GUIDE Publication AP7265.
Allen & Heath 2 XONE:4D User Guide Limited One Y ear W arranty This product is warranted to be free from defects in materials or workmanship for period of one year from the date of purchase by the original owner.
Allen & Heath 3 XONE:4D User Guide W arranty .............................................. 2 Pack ed Items ........................................ 4 Softwar e Installation PC .................... 5 Checking the Windows Driv er Installation .....
Allen & Heath 4 XONE:4D User Guide P A CKED ITEMS Check that you have received the f ollowing: Safety Sheet Important ! R e a d t h i s s h e e t before starting. Retain for future reference. Type A-B USB Lead To connect the Xone:4D to your computer.
Allen & Heath 5 XONE:4D User Guide SOFTW ARE INST ALLA TION PC STOP! BEFORE YOU DO ANYTHING WITH YOUR XONE:4D, PLEASE READ THE FOLLOWING CAREFULLY TO ENSURE YO UR PC IS CORRECTLY SET UP TO BE USED WITH THE DEVICE. PLEASE DOWNLOAD THE LATEST DRIVERS FROM: www.
Allen & Heath 6 XONE:4D User Guide 6— You will now be asked to unplug your Xone:4D Note: Always use the same US B port with your Xone:4D . When installing on a MS Windows system, the drivers will be associated with the USB port that you are cur rently plugged into.
Allen & Heath 7 XONE:4D User Guide CHECKING THE DRIVER INST ALLA TION—WINDO WS Checking the Driver Installation Once the driver installation is complete, you will need to check that the Xone:4D is being recog- nised.
Allen & Heath 8 XONE:4D User Guide STOP! BEFORE YOU DO ANYTHING WITH YOUR XONE:4D, PLEASE READ THE FOLLOWING CAREFULLY TO ENSURE YO UR PC IS CORRECTLY SET UP TO BE USED WITH THE MIXER. Mac OSX Open the Xone_4D_Driver_x.x.x.dmg to reveal the window shown.
Allen & Heath 9 XONE:4D User Guide SOFTW ARE INST ALLA TION—APPLE MA C Enter your system password. Click on “Continue Installation”. Restart your Mac.
Allen & Heath 10 XONE:4D User Guide CHECKING THE DRIVER INST ALLA TION—APPLE MA C Checking the Driver Installation Once the driver installation is complete, you wi ll need to ch eck that the Xone:4D is being recog- nised.
Allen & Heath 11 XONE:4D User Guide MIDI CHANNEL SETUP MIDI Channel Number The MIDI channel number will defa ult to channel 16, but can be changed to any channel between 1 and 16. To change the MIDI channel number and MIDI map: 1. Hold down the switch on th e encoder shown in the diagram 2.
Allen & Heath 12 XONE:4D User Guide Changing the MIDI Map Once the MIDI channel number has been stored, the illuminated switch to the far right of the unit will flash indicating that the M IDI map may now be selected. The fo llowing examples are in relation to the left-hand MIDI pod on the Xone:4D.
Allen & Heath 13 XONE:4D User Guide SOUNDCARD ARCHITECTURE ANALOGUE INPUTS: The analogue inputs are sourced from the input channels on the Xone:4D as follows: Channel Soundcard Input Selectable Fr.
Allen & Heath 14 XONE:4D User Guide SOUNDCARD SOFTW ARE DESCRIPTION SOFTWARE DESCRIPTION The inputs and outputs of the soundcard have a description within the software being used.
Allen & Heath 15 XONE:4D User Guide Turn on your Xone:4D, launch your Ableton software and open the Preferences window. ABLET ON SET UP 1— In the Preferences window select the Audio tab. Change the driver type to ASIO and set the Au- dio Device to Xone:4D USB ASIO driver In the Settings sect ion click on th e Input Config but- ton.
Allen & Heath 16 XONE:4D User Guide TRAKT OR SET UP Turn on your Xone:4D, launch your Traktor software and open the Preferences window. 1— In the Preferences window, expand the Audio Setup section and select Soundca rd. Set the Audio Device to Xone:4D USB A SIO driver ’ Now select Input Routing .
Allen & Heath 17 XONE:4D User Guide P ANEL DRA WINGS OUT IN FX2 SEND WARNING: FOR CONTINUED PROTECTION AG AINST RISK OF FIRE REPLACE FUSE WITH SAME TYPE A ND RATING. STRICTEMEN T IDENTIQUE EN VALE URS. ATTENTION: REMPLACER PAR UN FUSIBLE DO NOT EX POSE APPARATUS TO RAIN OR MOISTURE.
Allen & Heath 18 XONE:4D User Guide INTR ODUCTION T O THE XONE:4D Welcome to the Allen & Heath Xone:4D digi ta l DJ workstation. This system has been designed with the help of some of the world’s most cutting edge DJs to provide a seamless integration of tradit ional and computer-based audio replay systems.
Allen & Heath 19 XONE:4D User Guide DESCRIPTION MIXER Each of the 4 channels can sele ct one of 3 sources: phono, line or soundcard audio as shown. RIAA phono preamps are available on channels 1, 2 and 3. These may be changed to line input by resetti ng an internal jumper link if required.
Allen & Heath 20 XONE:4D User Guide MIDI CONTROL MIDI (musical instrument digital interface) is a standardised protocol for communication between electronic music devices as well as between those devices and computers. Two identical ba nks of MIDI controls are provided on either side of the mixer section.
Allen & Heath 21 XONE:4D User Guide SOUNDCARD INPUT BLOCK DIA GRAM MIC -12 +12 -12 +12 0 LEVEL 10 PHONES HF LF ADC ADC ADC ADC IN 1/2 IN 3/4 IN 5/6 IN 7/8 Auto-Sense SOUNDCARD USB2.
Allen & Heath 22 XONE:4D User Guide SOUNDCARD OUTPUT / MIDI BLOCK DIA GRAM DAC DAC DAC DAC OUT 1/2 OUT 3/4 OUT 5/6 OUT 7/8 SOUNDCARD USB2.0 OUT 9/10 Line Input Line Input Line Input Line Input Lin.
Allen & Heath 23 XONE:4D User Guide MIXER SECTION — CHANNEL INPUT 1 2 3 FX 1-2 send controls These controls adjust the signal level that is sent from each channel to the two FX mix busses. These signals will appear at the RCA sockets on the rear of the unit.
Allen & Heath 24 XONE:4D User Guide Channel Level Control This control has a range of +/- 10dB either side of the 0dB centre position. Use it to adjust the signal level of an audio source to give a nominal 0dB reading on the channel meter, with the peak level at or below +6dB.
Allen & Heath 25 XONE:4D User Guide 7 8 Channel Meter Displays the channel signal level. It is pre-EQ and pre-fader. This means it is not affected by the EQ or fader position. The channel level control should be set so that the meter averages around ‘0’ with loudest peaks no higher than ‘+6’.
Allen & Heath 26 XONE:4D User Guide MIXER SECTION — MIX AND MONIT OR 1 3 4 5 6 7 8 Mix / Monitor Meters The main meters follow the selected monitor source. The meter reads ‘0’ for an XLR output of +4dBu. The mixer should be operated with these meters averaging around ‘0’ with loudest peaks no higher than ‘+6’.
Allen & Heath 27 XONE:4D User Guide Cue / Add Mix Control Allows the main mix output to be added to the CUE signal. Turned fully anti-clockwise, only the active CUE signal is heard through the headphones when selected. Gradually turning clockwise introduces the main mix output to the headphones, adding to the ac- tive CUE.
Allen & Heath 28 XONE:4D User Guide MIXER SECTION — FIL TERS and LFO 1 3 5 LFO Tap Tempo button Tap the tap tempo button in time with the beat to set the frequency of the LFO. 1 LFO Depth control When assigned, the LFO modulates the filter with a cyclic frequency sweep effect in time to the beat set using the tap tempo button.
Allen & Heath 29 XONE:4D User Guide FILTER / X FADE SEL ECT 12 OFF DC FILTER 1 M IX BUS FILTER 2 M IX BUS MAIN LR MI X BUS FILTE R 1 MI X FILTE R 2 MI X XY CROSSFADER X FILTER 1 FILTER 2 Y XFADE C.
Allen & Heath 30 XONE:4D User Guide MIC -12 +12 -12 +12 0 LEVEL 10 PHONES HF LF FR ONT CONTR OLS & CONNECT ORS Headphones Outputs Stereo 1/4” TRS jack and 3. 5mm mini-jack. Plug in good quality stereo headphones intended for DJ monitoring. Use closed-ear headphones that provide maximum acoustic isolation when cueing your sources.
Allen & Heath 31 XONE:4D User Guide REAR CONNECT ORS 1 2 4 5 3 CH1-4 Stereo Line Input RCA phono. Connect stereo line level music sources such as CD, MD, DAT, drum machines, keyboards or other instruments. Do not connect turntables which require RIAA equalisation.
Allen & Heath 32 XONE:4D User Guide OUT IN FX2 SEND WARNING: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE FUSE WITH SAME TYPE AND RATING. STRICT EMENT IDENT IQUE EN VALEURS. ATT ENTION: REMPLAC ER PAR UN FUSI BLE DO NOT EX POSE APPARA TUS TO RAIN OR MOISTURE.
Allen & Heath 33 XONE:4D User Guide REAR CONNECT ORS 11 12 13 14 MIDI Input / Output 5 pin DIN socket. Connect to either a MIDI interface or directly to MIDI compatible equipment using a standard 5 pin DIN (MIDI) lead. The MIDI output socket data duplicates what is sent via the USB connection to the PC, and to the gameport.
Allen & Heath 34 XONE:4D User Guide MIXER SECTION — BPM COUNTER 1 3 BPM Display Displays the tempo of an anal ysed piece of music, rounded up to the nearest whole number. On power-up, and when t he detector is reset, the dis play will show a line of three dashes.
Allen & Heath 35 XONE:4D User Guide MIXER SECTION — BPM COUNTER 4 5 BPM Tap Tempo Button This control is used to tap in a beat manually at any speed between 70 and 400 BPM. The taps are averaged, so the greater number of taps the more accurate the result.
Allen & Heath 36 XONE:4D User Guide MIXER SECTION — LFO LFO Tap Tempo button Tapping this button will set the spe ed of the LFO (low frequency oscillator) within the range of 0.
Allen & Heath 37 XONE:4D User Guide MIXER SECTION — THE LFO EDIT OR The LFO Editor allows real-time mani pulation of the LFO waveform using the linear faders on the left and right MIDI pods of the Xone:4D. The LFO tempo can be set using the LFO Tap Tem po button or by synchronising the LFO tempo to the displayed BPM (see page 36).
Allen & Heath 38 XONE:4D User Guide MIDI CONTR OL SECTION 1 3 Rotary Encoders Turning an encoder produces MIDI CC (continuous controller) messages with a unique controller number i n two’s complement binary encoding. Refer to the MIDI mapping diagram for the differences between Map 1 and 2 for these controls.
Allen & Heath 39 XONE:4D User Guide MIDI CONTR OL SECTION MIDI Messages The diagram below shows which controls are a ssociated with MIDI CC (c ontinuous controller) and note on/off messages. These controls send the MIDI messages shown when operated.
Allen & Heath 40 XONE:4D User Guide MIDI IMPLEMENT A TION CHAR T Function Transmitted Received Remarks Basis Channel Default Option 16 1-16 16 1-16 Selectable with Configuration Utility Mode Default Messages Altered X X X X X X Note Number O O Refer to Diagram.
Allen & Heath 41 XONE:4D User Guide MIDI NO TE CHAR T Note No. (Hex) Note No. (Decimal) Note Name Note No. (Hex) Note No. (Decimal) Note Name 00 0 C-2 36 54 F#2 01 1 C#-2 37 55 G2 02 2 D-2 38 56 G.
Allen & Heath 42 XONE:4D User Guide FIL TER REFERENCE The VCF Filters A voltage controlled filter is an audio filter where the cut-off frequency is altered by a DC control voltage rather than a variable resistor.
Allen & Heath 43 XONE:4D User Guide It is most important that the s ystem level se ttings are corr ectly set. It is well known that many DJs push the level to maximum wit h meters peaking hard in the belief that they are getting the best from the system.
Allen & Heath 44 XONE:4D User Guide The connection to earth (ground) in an audio system is important for two reasons: SAFETY - To protect the operator from high voltage electric shock, and AUDIO PERFORMANCE - To minimise the effect of earth (ground) loops which result in audible hum and buzz, and to shield the audio signals from interference.
Allen & Heath 45 XONE:4D User Guide CABLES AND CONNECTIONS USB TYPE A USB TYPE B MAX 2M SPDIF RCA - 75 ohm coax MIDI - 5-pin DIN SPDIF OPTICA L - TOSLINK 1=ground 2=hot (+) 3=cold (-) BALANCED XLR.
Allen & Heath 46 XONE:4D User Guide USER OPTIONS Internal Link Options The Xone:4D offers several internal option settings: • FX1 and FX2 Return Routing — The FX1 and FX2 Retur ns ar e set, b y default, to route to the main LR Mix. Link options allow the return to be routed through either Filter 1 or Filter 2.
Allen & Heath 47 XONE:4D User Guide SPECIFICA TIONS Dimensions and Weights The console is fitted with rubber feet for desktop operation. A scre w on rack ear kit is included for 19” rack or plinth mounting. Width Height Depth Weight Desktop 432 mm (17”) 88 mm (3.
Allen & Heath 48 XONE:4D User Guide PR ODUCT REGISTRA TION Registering your product Please go to www.allen-heath.com/register.asp and register your product’s serial number and your details.
Ein wichtiger Punkt beim Kauf des Geräts Allen & Heath XONE:4D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Allen & Heath XONE:4D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Allen & Heath XONE:4D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Allen & Heath XONE:4D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Allen & Heath XONE:4D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Allen & Heath XONE:4D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Allen & Heath XONE:4D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Allen & Heath XONE:4D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Allen & Heath XONE:4D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
