Benutzeranleitung / Produktwartung EOC2611P des Produzenten EnGenius Technologies
Zur Seite of 89
E O C26 11P  Wi r e l e s s  Outdoor  Acc es s  Po i nt  /  Client  Bridg e    User  Manual  V ersion: 1 .0.
EnGenius E OC261 1P V ersion 1.0 2 Ta b l e  of  Conten ts   1  INTRODUCTION .......... ............................. ................................. .................................. ......... ........... 6  1.1  F EATURES ...
EnGenius E OC261 1P V ersion 1.0 3 5.3.3  S PANNIN G  T REE  S ETTINGS .............................. ............................................. ..................................... 3 8  5.4  W IRELESS ................... ..........
EnGenius E OC261 1P V ersion 1.0 4 7.4.2  LAN  S ETTINGS .................................................... ............................................. .............................. 77  7.4.3  VPN  P ASS  T HROUG H .......... ..
EnGenius E OC261 1P V ersion 1.0 5 Rev i si on  His t o ry   Ve r s i o n  Date  Rem ark  1.0  Dec  15,  2009  Initial  Ve rs i o n  .
EnGenius E OC261 1P V ersion 1.0 6 1 Introduction   EOC 261 1P  is  a  long  rang e  outdoor  wireless  Acc ess  Poi nt  /  Client  Bridge  that  opera tes  se amlessly  in  the  2.
Security  ¾  802.11i  WEP ,  WP A,  WP A2  (Encr yptio n  support  TKIP /AE S)  ¾  MAC  address  functions  MAC  addre ss  fi lter  (AP  mode)  ¾  802.1x  IEEE802.
1.4 Applications  The  wireless  LA N  pr oducts  are  easy  to  ins tall  and  highl y  efficient.  The  fol l ow i ng  list  describe s  some  of .
2 Understanding  the  Hardware   2.1  Hardware  Installation  1. Place  the  unit  in  an  appropriate  location  after  conducting  a  site  survey.
EnGenius E OC261 1P V ersion 1.0 10 2.3  Mounting  Kits  The  images  below  depict  the  standard  mount ing  kits.                      2.
EnGenius E OC261 1P V ersion 1.0 11 2. Select  Internet  Prot ocol  (TCP/IP)  and  then  click  on  the  Properties  button.  This  will  allow  you  to  configure  the  TCP/IP  settings  of  your  P C/Notebook.
EnGenius E OC261 1P V ersion 1.0 12 3 Switching  Between  Operating  Modes   This  devi ce  can  operate  in  thre e  modes:  Access  Point,  Client  Bridge ,  WDS  Bridge ,  Client  Router  and  Mesh  modes.
EnGenius E OC261 1P V ersion 1.0 13 4 Access  Point  Operating  Mode   4.1  Logging  In   Afte r  logging  in  you  will  graph ical  user  interface  (GUI)  of  the  device.
4.2  Status   There  are  thre e  opti ons  under  the  Status  section  of  the  lef t  menu:  Main ,  Wireless  Client  List ,  and  Syste m  Log .  Each  option  is  described  in  detail  below.
EnGenius E OC261 1P V ersion 1.0 15 4.2.2 Wireless  Client  List   This  page  di spla ys  the  list  of  Clients  that  are  associated  to  th e  Access  Point.   The  MAC  addresses  and  signal  strength  for  each  client  is  display ed.
4.3  System   Under  the  System  section  of  the  left  menu,  you  will  see  the  following  options:  System  Prop erties,  IP  Set tings ,  and  Spanning  Tree  Settings.
4.3.2 IP  Set tings   This  page  all ows  you  to  configure  th e  device  with  a  static  IP  address  or  a  DHCP  client.
4.3.3 Spanni ng  Tree  Setting s   Spanning ‐ Tre e  Protocol  is  a  link  ma nagement  protocol  that  provi des  path  redundanc y  while  preventing  undesirable  loops  in  the  network.
4.4 Wireless   The  Wirel ess  sec tion  of  the  left  men u  has  the  following  options:  Wirel ess  Network ,  Wireless  MAC  Filter ,  WDS  Link  Settings ,  and  Wireless  Advanced  Settings .
EnGenius E OC261 1P V ersion 1.0 20    SSID :  Type  in  yo ur  SSID   VLAN  ID:  Specify  the  VLAN  ID  to  be  applied  to  this  SSID.   Suppressed  SSID:  When  enabl ed,  the  SSID  will  be  hidden.
EnGenius E OC261 1P V ersion 1.0 21 `  Wireless  Security  –  Securi ty  Mode  :  WEP     ``  Security  Mode :  Select  WEP  from  the  drop ‐ down  list  if  your  wireless  network  uses  WEP  encryption.
EnGenius E OC261 1P V ersion 1.0 22 `  Wireless  Security  –  Securi ty  Mode  :  WPA ‐ PSK,  WPA2 ‐ PSK,  WPA ‐ PSK  Mixed     ``  Security  Mo.
EnGenius E OC261 1P V ersion 1.0 23 `  Wireless  Security  –  Securi ty  Mode  :  WPA,  WPA2,  WPA  Mixed     ``  Security  Mode :  Select  WPA ,  WP A2  or  WPA  Mixed  from  the  drop ‐ down  list  if  your  wireless  network  uses  WPA.
EnGenius E OC261 1P V ersion 1.0 24 4.4.2 Wireless  MAC  Filter   On  this  page  you  can  filter  the  MAC  address  by  allowing  or  blocking  acce ss  the  network .
EnGenius E OC261 1P V ersion 1.0 25 4.4.3 WDS  Link  Settings  On  this  page  you  can  set  the  WDS  link  to  connect  to  another  WDS  AP  or  WDS  Br idge.  The  Maximum  connectio n  is  up  to  8  units.
EnGenius E OC261 1P V ersion 1.0 26 4.4.4 Wireless  Advanced  Settings   On  this  page  you  can  co nfigure  the  advanced  setting s  to  tweak  th e  perform ance  of  your  wireles s  network.
EnGenius E OC261 1P V ersion 1.0 27 4.5  Management   The  following  options  ar e  under  the  Manag ement  sect ion  of  the  left  menu:  Admi nist ratio n,  SNMP  settings,  backu p/rest ore  settings,  firmw are  upg rade,  time  settings,  and  log .
EnGenius E OC261 1P V ersion 1.0 28 4.5.2 Management  VLAN   This  optio n  allows  you  to  specify  VLAN  ID  (From  1  to  4095).   Caution:  If  you  reconfigure  th e  Management  VLAN  ID ,  you  may  lose  connectivity  to  the  access  point.
EnGenius E OC261 1P V ersion 1.0 29 4.5.3 SNMP  Se ttings   This  option  allows  you  to  assign  the  contact  details,  location ,  and  community  name  and  trap  settings  for  SNMP.
EnGenius E OC261 1P V ersion 1.0 30 4.5.4 Backup/Restore  settings,  Reset  to  factory  default  setting s   This  option  is  used  to  save  th e  curre.
EnGenius E OC261 1P V ersion 1.0 31 4.5.5 Firmware  Upgrade   This  page  is  used  to  upgrad e  th e  firmware  on  the  device.  Make  sure  that  do wnloaded  th e  appropriate  firmware  from  your  vendor.
EnGenius E OC261 1P V ersion 1.0 32 4.5.7 Log   The  Log  pag e  dis plays  a  list  of  even ts  that  are  triggered  on  the  Ethernet  and  Wireless  interface.
EnGenius E OC261 1P V ersion 1.0 33 5 Client  Bridge  Operating  Mode   5.1  Logging  In   Afte r  logging  in  you  will  graph ical  user  interface  (GUI)  of  the  device.
EnGenius E OC261 1P V ersion 1.0 34 the  ‘LAN  Settings’  section.  In  the  ‘Current  Wireless  Settings’  section,  the  operat ion  mode,  wireless  mode,  channel/frequency,  SSI D,  security  and  distance  are  d isplayed.
5.2.2 Connection  Stat us   Click  on  the  Connection  Status  link  under  the  Status  drop ‐ down  menu.  This  page  dis plays  the  curren.
EnGenius E OC261 1P V ersion 1.0 36  5.3  System   Under  the  System  section  of  the  lef t  menu,  you  will  see  the  follo wing  optio ns:  System  Properties,  IP  Settings,  and  Spanning  Tree  Settings.
5.3.2 IP  Setti ngs   This  page  all ows  you  to  configure  th e  device  with  a  static  IP  address  or  a  DHCP  client.
5.3.3 Spanning  Tre e  Settings   Click  on  the  Spannin g  Tr ee  link  under  the  Syste m  drop ‐ down  menu  Spanning ‐ Tree  Protocol  is .
5.4  Wireless   The  Wireless  section  of  the  left  menu  ha s  the  follo wing  options:  Wireless  Network,  Wireless  Security  and  Wireless  Advanced  Se ttings .  Each  opti on  is  descri bed  below.
EnGenius E OC261 1P V ersion 1.0 40 5.4.2 Wireles s  Security   You  can  ch ange  the  wireless  security  settings  may  cause  this  wireless  client  to  associate  with  a  different  one.
 Wireless  Security  :  WEP    Security  Mode :  Select  WEP  from  the  drop ‐ down  list  if  your  wireless  netw ork  uses  WEP  encryption.
Wireless  Security  :  WPA ‐ PSK    Security  Mode :  Select  WPA ‐ PS K  from  the  drop ‐ down  list  if  your  wireless  network  uses  WPA  pre ‐ shared  key.
Wireless  Security  :  WPA2 ‐ PSK    Security  Mode :  Selec t  WPA2 ‐ PSK  from  the  dr op ‐ down  lis t  if  your  wirele ss  network  uses  WPA2  pre ‐ shared  key.
5.4.3 Wireles s  Advanced  Settings   On  this  page  you  can  co nfigure  the  advanced  setting s  to  tweak  th e  perform ance  of  your  wireles s  network.
EnGenius E OC261 1P V ersion 1.0 45 5.5  Management   The  following  options  are  under  the  Management  section  of  the  left  menu:  Administration,  SNMP  Settings,  Backu p/Resto re  Settings,  F irmwa re  Upg rade,  Time  Settings ,  Log  and  Diagnostics .
EnGenius E OC261 1P V ersion 1.0 46 5.5.2 SNMP  Setti ngs   This  option  allows  you  to  assign  the  contact  details,  location ,  and  community  name  and  trap  settings  for  SNMP.
EnGenius E OC261 1P V ersion 1.0 47 5.5.3 Backup/Restore  settings,  Reset  to  factory  default  settings   This  option  is  used  to  save  th e  curren.
EnGenius E OC261 1P V ersion 1.0 48 5.5.4 Firmware  Upg rade   This  page  is  used  to  upgrad e  th e  firmware  on  the  device.  Make  sure  that  do wnloaded  th e  appropriate  firmware  from  your  vendor.
EnGenius E OC261 1P V ersion 1.0 49 5.5.5 Time  Settings   This  page  allows  you  to  conf igure  the  time  on  the  device.  You  ma y  do  this  manually  or  by  connecting  to  a  NTP  server.
EnGenius E OC261 1P V ersion 1.0 50 5.5.7 Diagnostics   Click  on  the  Diagnostics  link  unde r  the  Manageme nt  menu.  In  this  page ,  user  can  let  unit  to  ping  other  network  equipment.
EnGenius E OC261 1P V ersion 1.0 51 6 WDS  Bridge  Operating  Mode    6.1  Logging  In   Afte r  logging  in  you  will  graph ical  user  interface  (GUI)  of  th e  device.
EnGenius E OC261 1P V ersion 1.0 52 Firmware  ar e  displayed  in  the  ‘System  Information’  section.  IP  address,  Subnet  Mask,  De faul t  Gateway  and  DHCP  Client  are  displayed  in  the  ‘LAN  Settings’  section.
EnGenius E OC261 1P V ersion 1.0 53 6.2.2 WDS  Link  Status   This  page  displ ays  the  cu rrent  status  of  the  WDS  Link ,  including  Sta tion  ID,  MAC  address,  Sta tus,  RSSI  (Received  Signal  Stre ngth  Indicator).
EnGenius E OC261 1P V ersion 1.0 54  6.3  System   Under  the  Syste m  section  of  the  left  menu,  you  will  see  the  fo llowing  option s:  System  Properties,  IP  Settings  and  Spanning  Tree  Settings .
6.3.2 IP  Setti ngs  This  page  allows  you  to  configure  the  device  with  a  static  IP  address  or  a  DHCP  client.
6.3.3 Spanning  Tre e  Settings  Spanning ‐ Tr ee  Protocol  is  a  link  management  protocol  that  prov ides  path  redun dancy  while  preventing  undesirable  loops  in  the  network.
EnGenius E OC261 1P V ersion 1.0 57 6.4  Wireless   The  Wireless  section  of  the  lef t  menu  ha s  the  following  options:  Wir eless  Ne twork,  WDS  Link  Settings,  WDS  Security  and  Wireles s  Advanced  Se ttings .
EnGenius E OC261 1P V ersion 1.0 58 6.4.2 WDS  Link  Settings   This  page  all ows  you  to  setting  your  WDS  device  link  up  to  16  units.
EnGenius E OC261 1P V ersion 1.0 59 6.4.3 WDS  Security     Security  Mode :  Select  WEP  from  the  drop ‐ down  list  if  your  wireless  netw ork  uses  WEP  encryption.
EnGenius E OC261 1P V ersion 1.0 60 6.4.4 Wireles s  Advanced  Settings  On  this  page  you  can  conf igure  the  advanced  set tings  to  tweak  th e  per formance  of  yo ur  wireless  network.
EnGenius E OC261 1P V ersion 1.0 61 6.5  Management   The  follow ing  opt ions  are  under  the  Management  section  of  the  left  menu:  Administration,  SNMP  Settings,  Backup/Restore  Settin gs,  Firmware  Upgrade,  Time  Settings,  Log  and  Diagnostics .
EnGenius E OC261 1P V ersion 1.0 62 6.5.2 SNMP  Setti ngs   This  option  allows  you  to  assign  the  contact  details,  location ,  and  community  name  and  trap  settings  for  SNMP.
EnGenius E OC261 1P V ersion 1.0 63 6.5.3 Backup/Restore  settings,  Reset  to  factory  default  setting s   This  option  is  used  to  save  th e  curre.
EnGenius E OC261 1P V ersion 1.0 64 6.5.4 Firmware  Upgrade   This  page  is  used  to  upgrad e  th e  firmware  on  the  device.  Make  sure  that  do wnloaded  the  appropriate  firmware  from  your  vendor.
EnGenius E OC261 1P V ersion 1.0 65 6.5.6 Log   Log  page  displays  a  list  of  events  that  are  triggered  on  the  Etherne t  and  Wireless  interface.
EnGenius E OC261 1P V ersion 1.0 66 6.5.7 Diagnosti cs   In  thi s  page ,  user  can  let  unit  to  ping  other  network  equipment.  And  user  also  can  monit or  a  route  from  unit  to  your  target.
7 Client Router Oper ating Mode   7.1  Logging  In   Afte r  logging  in  you  will  graph ical  user  interface  (GUI)  of  the  device.  The  navigation  drop ‐ down  menu  on  left  is  divided  into  four  se ctions:  1.
EnGenius E OC261 1P V ersion 1.0 68   7.2.1 Main   The  status  that  is  displa yed  corresponds  with  th e  operati ng  mode  that  is  selected.
EnGenius E OC261 1P V ersion 1.0 69    7.2.3 Connection  Stat us  This  page  displa ys  the  current  status  of  th e  network,  including  network  t.
EnGenius E OC261 1P V ersion 1.0 70 .
EnGenius E OC261 1P V ersion 1.0 71  7.3  Sys tem   Under  the  System  section  of  the  left  menu,  you  will  see  the  following  opt ions:  System  Properties  setting ,  which  is  described  below.
EnGenius E OC261 1P V ersion 1.0 72  7.4  Router   Under  the  Rou ter  section  of  th e  left  menu,  you  will  see  the  following  op tions:  WAN  settings,  LAN  setting s ,  and  VPN  Pass  Through .
EnGenius E OC261 1P V ersion 1.0 73    7.4.1.2 WAN  –  Static  IP   The  WAN  interfa ce  can  be  configured  as  Static  IP  address.
EnGenius E OC261 1P V ersion 1.0 74 7.4.1.3 WAN  –  PPPoE   The  WAN  interface  can  be  configured  as  PPPoE.  Thi s  type  of  connection  is  usu al ly  used  for  a  DSL  service  and  requires  a  username  and  password  to  con nect.
EnGenius E OC261 1P V ersion 1.0 75 7.4.1.4 WAN  –  PPTP    The  WAN  interface  can  be  configured  as  PPTP.  This  type  of  connection  is  usually  used  for  a  DSL  service  and  requires  a  username  and  password  to  con nect.
EnGenius E OC261 1P V ersion 1.0 76  Domain  Name  Servi ce :  Select  Get  Au tomatically  from  ISP  if  th e  ISP  will  provide  the  DNS  add ress,.
EnGenius E OC261 1P V ersion 1.0 77 7.4.2 LAN  Settings  This  page  allows  you  to  config ure  the  LAN  interface  as  IP  add ress,  IP  subnet  mask  and  WINS  server  IP.
EnGenius E OC261 1P V ersion 1.0 78 7.5  Wireless   Under  the  Wi r e l e s s  section  of  the  left  menu ,  you  will  see  the  foll ow in g  options:  Wireless  Network,  Wireless  Security,  and  Wireless  Advanced  Settings .
EnGenius E OC261 1P V ersion 1.0 79 7.5.2 Wireles s  Security    7.5.2.1 Wireless  Secur ity  :  WEP   Security  Mode :  Select  WEP  from  the  drop ‐ down  list  if  your  wireless  netw ork  uses  WEP  encryption.
EnGenius E OC261 1P V ersion 1.0 80   7.5.2.2 Wireless  Secur ity  :  WPA ‐ PSK,  WPA2 ‐ PSK   Security  Mode :  Select  WPA ‐ PS K  or  WPA2 ‐ PSK  from  the  drop ‐ down  list  if  your  wireless  network  uses  WPA  pre ‐ shared  key.
EnGenius E OC261 1P V ersion 1.0 81 7.5.3 Wireles s  Advanced  Settings   On  this  page  you  can  co nfigure  the  advanced  setting s  to  tweak  th e  perform ance  of  your  wireles s  network.
EnGenius E OC261 1P V ersion 1.0 82 7.6  Mana geme nt   Under  the  Manageme nt  section  of  the  left  menu,  you  will  find  the  following  opti.
EnGenius E OC261 1P V ersion 1.0 83 7.6.2 SNMP  Setti ngs   This  option  allows  you  to  assign  the  contact  details,  location ,  and  community  name  and  trap  settings  for  SNMP.
EnGenius E OC261 1P V ersion 1.0 84 7.6.3 Backup/Restore  settings,  Reset  to  factory  default  settings   This  option  is  used  to  save  th e  curren.
EnGenius E OC261 1P V ersion 1.0 85 7.6.4 Firmware  Upg rade   This  page  is  used  to  upgrad e  th e  firmware  on  the  device.  Make  sure  that  do wnloaded  th e  appropriate  firmware  from  your  vendor.
EnGenius E OC261 1P V ersion 1.0 86 7.6.6 Log   Click  on  the  Log  lin k  under  the  Management  menu.  The  Log  page  displays  a  list  of  events  that  are  triggered  on  the  Ethernet  and  Wireless  interface.
EnGenius E OC261 1P V ersion 1.0 87 7.6.7 Diagnostics   In  thi s  page ,  user  can  let  unit  to  ping  other  network  equipment.  And  user  also  can  monit or  a  route  from  unit  to  your  target.
EnGenius E OC261 1P V ersion 1.0 88  Appendix  A  –  FCC  Interference  Statement   Fede r al  Communication  Commissi on  Interf erence  Sta tement   This .
Multi-Function Gig abit Wireless-N C lient Bridge V ersion 1.0 89 Appendix  B  –  IC  Statement    Industry  Cana da  stateme nt:   This  devi ce  complies  with  RSS ‐ 210  of  th e  Industry  Canada  Rules.
Ein wichtiger Punkt beim Kauf des Geräts EnGenius Technologies EOC2611P (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
 
                Wenn Sie EnGenius Technologies EOC2611P noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für EnGenius Technologies EOC2611P - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von EnGenius Technologies EOC2611P reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über EnGenius Technologies EOC2611P erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon EnGenius Technologies EOC2611P besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von EnGenius Technologies EOC2611P verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit EnGenius Technologies EOC2611P. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei EnGenius Technologies EOC2611P gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.