Benutzeranleitung / Produktwartung W R 4 4 V 2 des Produzenten Digi
Zur Seite of 27
T ransPort ® WR44v2 Wireless Routers Installation Guide January 9, 2012 90001264_A.
T ransPort ® WR44v2 Installation Guide Page 2 Disclaimer Digi International makes no representations or warranties with respect to the contents or use of this manual, any software drivers or associat.
T ransPort ® WR44v2 Installation Guide Page 3 Special notes on safety for wireless routers Digi International products are designed to the highest standards of safety and international standards compliance for the markets in which they are sold. However , cellular-based products contain radio devices which require specic consideration.
T ransPort ® WR44v2 Installation Guide Page 4 T able of Contents 1 Package Contents ..................................................................... 5 2 Introduction ...............................................................................
T ransPort ® WR44v2 Installation Guide Page 5 15-pin T elemetry Cable [Fleet Card models only] 1 Package Contents If any item is missing or damaged, please contact your supplier . Also, make a record of any damage that may have occurred during shipping and report it to the carrier .
T ransPort ® WR44v2 Installation Guide Page 6 Preface This guide describes the installation procedure for the T ransPort WR family of routers. It is intended to provide sufcient information to be able to connect the unit to terminal equipment and power-on the unit.
T ransPort ® WR44v2 Installation Guide Page 7 2.1 Enclosure Features T ransPort WR44 2 1 2 T ransPort WR44 R T ransPort WR44 DSL V ariant DSL 1. Commercial Enclosure 2.
T ransPort ® WR44v2 Installation Guide Page 8 12. 1 10 2 3 4 5 6 7 8 9 2.2 Front Panel Features T ransPort WR44 DSL V ariant 11 DSL 1. USB Host Connector - The USB host connector may be used to connect compatible USB 2.0 client devices such as memory sticks, and serial adapters.
T ransPort ® WR44v2 Installation Guide Page 9 • Constant red - no DSL is detected. • Flashing red - DSL is detected and unit is trying to train up to the DSL signal.
T ransPort ® WR44v2 Installation Guide Page 10 2.3 Rear Panel Features WWAN PRIMAR Y WIFI SECONDARY 9-36VDC 3.5A MAX MAIN AUX. WIFI PRIMARY WWAN SECONDAR Y LAN3 LAN2 LAN1 LAN0 DSL SERIAL 0 1 7 2 3 4 8 5 6 9 10 1. Primary Cellular (WW AN) Antenna Connector - This SMA female connector is used to connect the unit’s primary cellular antenna.
T ransPort ® WR44v2 Installation Guide Page 1 1 2.4 Under Unit Features T ransPort WR44 [Front of Unit] 1 2 3 1 [Rear of Unit] T ransPort WR44 R [Front of Unit] [Rear of Unit] 3 1. Unit mounting holes. 2. SIM slot cover plate mounting hole. 3. Reset button - The reset button allows the user to return the unit to its factory default settings.
T ransPort ® WR44v2 Installation Guide Page 12 2.5 Additional Hardware Features The T ransPort WR44 v2 is available with various hardware options, as shown below: WW AN PRIMARY WIFI SECONDARY 9-36VDC 3.
T ransPort ® WR44v2 Installation Guide Page 13 1. ASY Serial Port (3x) - Provides three additional asynchronous RS232 serial ports using RJ45 connectors. 2. SYN/ASYN Serial Port - Provides an X.21/RS422/RS232 synchronous / asynchronous serial port using a DB25 connector .
T ransPort ® WR44v2 Installation Guide Page 14 3 Installation Mounting Tips The T ransPort WR44 should be positioned on a at, level surface or via a wall-mount, rackmount, or DIN rail mounting brackets (see the Accessories section on page 23 for all options).
T ransPort ® WR44v2 Installation Guide Page 15 The T ransPort WR44 also allows for dual network installations where one wireless service can be used as a back-up in the event that the primary service fails. These installations cannot be used to access two networks simultaneously .
T ransPort ® WR44v2 Installation Guide Page 16 4 Conguration Once the unit has been installed and powered up, it needs to be congured to communicate with the LAN and WAN. Conguration is performed either using the Command Line Interface (CLI) or the Web Interface.
T ransPort ® WR44v2 Installation Guide Page 17 The Quick Start Wizard is located in the Getting Started section on the Home menu. 4.2.1 Cellular: CDMA If your unit is to be used on a CDMA network, the embedded module must be provisioned on the network before it can make a connection.
T ransPort ® WR44v2 Installation Guide Page 18 4.2.1.1 CDMA Provisioning CDMA provisioning is different from GSM since CDMA (in most cases) does not use a SIM card. The CDMA modem provisioning process creates a CDMA data connection to the mobile carrier network.
T ransPort ® WR44v2 Installation Guide Page 19 4.3 Command Line Interface (CLI) In order to congure the unit serially , ensure that the unit is connected to a PC (as outlined in Step 5 on page 15 of the Installation section). Also, terminal emulation software (such as HyperT erminal) will be required.
T ransPort ® WR44v2 Installation Guide Page 20 T o stop the DHCP server from serving addresses, use the following command: Command Description DHCP 0 IPMIN X Removes the minimum IP address that will be server via DHCP , disabling the DHCP server As an example, to stop the DHCP sever from DHCP requests, enter the command DHCP 0 IPMIN ! .
T ransPort ® WR44v2 Installation Guide Page 21 5 T roubleshooting 5.1 T roubleshooting Resources There are several resources available to you for support of your Digi product or resolving conguration difculties at Digi’s Support site, http://www .
T ransPort ® WR44v2 Installation Guide Page 22 6 Specications Specications Digi T ransPort WR44 / WR44 R General Features: Dimensions (L x W x H) 5.7” x 8.3” x 1.6” (145 mm x 210 mm x 40 mm) DSL V ariant 5.7” x 10.3” x 1.6” (145mm x 262mm x 40mm) Weight 1.
T ransPort ® WR44v2 Installation Guide Page 23 7 Accessories AC Power Supplies North America (NA) 76000823 International (Intl.) 76000823 NA - Extended T emp.
T ransPort ® WR44v2 Installation Guide Page 24 Antennas - Cellular Direct Mount, Quad Band, 2dBi 76002050 Direct Mount, Penta Band, 2dBi 76002052 Direct Mount, Dual Band, 3dBi DC-ANT -DBDP3 Magnet Mount, Penta Band, 2.5dBi 76002051 Magnet Mount, Dual Band, 4.
T ransPort ® WR44v2 Installation Guide Page 25 Declaration of Conformity EC Declaration Of Co nf ormity We, Ma nu fa ct u rer 's Na me : Digi Int er na ti onal of Ma nu fa ct u rer 's A dd .
T ransPort ® WR44v2 Installation Guide Page 26 EC Declaration Of Co nf ormity Pa rt Number W R4 4- NNH H-ZYY-XX • W he re NN c an be : 00 , 01 , C0 , C1 , C2 , C3 , C4 , C5 , C6 , C8 , E1 , G 1 , U.
Copyright © 201 1 Digi International Inc. All rights reserved. Digi, Digi International, the Digi logo, a Digi International Company , the Digi web site, Digi Remote Manager , Digi T ransPort, Digi T ransPort WR, and Digi T ransPort WR44 are trademarks or registered trademarks of Digi International, Inc.
Ein wichtiger Punkt beim Kauf des Geräts Digi W R 4 4 V 2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Digi W R 4 4 V 2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Digi W R 4 4 V 2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Digi W R 4 4 V 2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Digi W R 4 4 V 2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Digi W R 4 4 V 2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Digi W R 4 4 V 2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Digi W R 4 4 V 2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Digi W R 4 4 V 2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
