Benutzeranleitung / Produktwartung 917-299751 des Produzenten Craftsman
Zur Seite of 32
OWNER'S MANUAL MODEL NO. 917.299751 Caution: Read and follow all Safety Rules and Instructmns Before Operating This Eqmpment CRRFrZMR# ® 5.0 HP 14 INCH DTH REAR TINE TILLER W_TH COUNTER ROTATING TINES • Assembly • Operation ° Customer Responsibilities • Service and Adjustment ° Repair Parts Sears, Roebuck and Co.
SAFETY RULES Safe Operation Practices for Walk-Behind Powered Rotary Tillers TRAINING • Read the operating and service instruction manuai care- fully. Be thoroughly familiar with the controls and the proper use of the equipment, Know howto stop the unit anddisengage the controls quickly.
CONGRATULATIONS on your purchase ofa Sears TiIler,. It has been designed, engineered and manufactured to give you the best possible dependability and performance.
L TABLE OF CON ....... _,_ _ ................. L±JUUlULU_ ,,,I ,ll_ Inl,, _ .... II uln,,,, .............................. SAFETY RULES ............................................................ 2 CUSTOMER RESPONSIBILITIES ...................... 3,14-16 PRODUCT SPECIFICATIONS .
ACCESSORIES These accessories were available when the tilter was purchased. They are also available at most Sears Retail outlets, Catalog and Service Centers° Most Sears Stores can order repair parts for you when you provide the model number of your tiller, ENGINE SPARK PLUG MUFFLER AIR FILTER ,! i .
ill, ii ......... .................. ASSEMBLY .................... ill i,, i ,m,L , ,,,,i ill ,,,,,,,i ,,,l,,,,qw OPERATOR'S POSITION (See Fig. 1) The right hand (R.H.) and left hand (LH.) sides of your tiller are determined from the operator's position while standing behind flier.
ASSEMBLY UNPACKING CARTON (See Fig. 2) I CAUTION: Be careful of exposed i staples when handling or disposing of cartoning material. IMPORTANT: WHEN UNPACKING AND ASSEMBLING TILLER, BE CAREFUL NOT TO STRETCH OR KINK CABLES • While holding handle assembly, cut cable ties securing handle assembly to top frame and depth stake.
ASSEMBLY CONNECT SHIFT ROD (See Fig. 6) • Insert end of shift rod farthest from bend into hole of shift lever indicator, • Insert hairpin clip through hole of shift rod to secure, • Insert other end of shift rod _nto hole in shift lever, , Insert second hairpin clip through hole of shift rod.
i,J i,, OPERATION KNOW YOUR TILLER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER, Compare the illustrations with your tiller to familiarize yourself with the location of .
OPERATION The operation of any tiller can result In foreign oblects thrown Into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller a.
TURNING • Releasethe drive control bar, • Move throttle control to "SLOW" position. . Place shift lever indicator in "F" (forward) position. Tines will not turn. • Lift handle to raise tines out of ground. • Swingthe handle in the opposite direction you wish to turn, being careful to keep feet and legs away from tines.
OPERATION TO START ENGINE (See Fig, 13) I zt ,.o,,.o oo°,.o, ,n ! "OFF" posltlon when starting engine ........... ............ * Make sure spark plug wire is propedy connected° . Move shift lever indicator to "N" (neutral) position.
OPEBATUON CULTIVATING Cultivating is destroying the weeds between rows to pre- vent them from robbing nourishment and moisture from the plants, At the same time, breaking up the upper layer of soil crust will help retain moisture in the soil.
CUSTOMER RESPONSIBILITIES , m, m .................. MA,.TE.A.CE SCHEDULE _ / ,, o RE, U ,R SER',OE , Check Engine 0tl Level kit t_ .... Change Engtne Oil if !_1_2 ...... _ 0ii PivotPoints I_ ii H ,, Inspect Spark Arrester Muffler if iii w INNN "' .
ILmTMES Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine. Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for maintenance.
CUSTOMER RESPONSIBILITIES MUFFLER TRANSMISSION Your transmission is sealed and wil! only require lubrication if serviced° Do not operate tiller without muffler. Do not tamper with exhaust system_ Damaged mufflers or spark arresters could create a fire hazard.
ERVNCE AND ADJUSTMENTS TO REMOVE BELT GUARD (See Fig, 24) NOTE: For ease of removal, remove hairpinclip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch° • Remove two (2) cap nutsand washers from side of belt guard° • Remove hex nut and washer from bottom of belt guard (located behind wheel).
SERVICE AND ADJUSTMENTS TINE REPLACEMENT (See Figs. 26, 27 and 28) A ....... CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.
;ERVICE AND ADJUSTMENTS ENGINE TO ADJUST THROTTLE CONTROL CABLE (See Fig, 29) • Loosen cable clamp screw to allow cable to move, • Move throttle control lever on upper handle to "FAST" position_ ° Pull throttle cable out until engine bellcrank is back as far as it will go.
STORAGE immediately prepare your' tilter for storage at the end of the season or if the unit will not be used for 30 days or more, CAUTION: Never store the tiller with gasoline In the tank inside a building where fumes may reach an open flame or spark, Allow the engine to cool before storing in any enclosure° i.
TFtOUEI;LESHOOT NG POINTS ii JLL JII PROBLEM Will not start Hard to start CAUSE CORRECTION 1, Outoffuel. 2 Engine not "CHOKED" properly, 3, Engine flooded, 4, Dirty air cleaner 5, Water In fuel, 6, Clogged fuel tank 7, Loose spark plugwire 8, Bad spark plug or Improper gap, 9.
REPAIR HANDLES PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 9 2 1 30 29 15 KEY PART DESCRIPTION NO. NO. 1 110707X Cap, Sleeve 2 110674X Grip, Handle 3 110673X Grommet, Handle 4 t27254X Bar, Drive Control Assembly 5 6712J Cap, Vinyl 6 126948X Panel, Control 7 110641X Bushing, Split 8 STD511005 *Screw, Mach.
REPAIR PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 MAINFRAME, LEFT SIDE 38 12 36 17 18 20 21 15 KEY NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 PART NO, STD5.
REPAIR PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 MAINFRAME, RIGHT SIDE 7 6 KEY NO. 1 2 3 4 5 6 7 8 PART NO. 8TD541431 102332X 74760524 102173X STD55 ! 137 STD541037 S'rD624003 126875X DESCRIPTION * Nut, Keps 5/16-18 Bracket, Reinforcment Bolt, Hex 5/'!6+18 x 1+1/2 Counter Weight, R.
REPAUR PARTS 5 HP TRANSMISSION 14" TILLER .. - MODEL NUMBER 917.299751 11 25 25 6 5 48 KEY NO. 1 3 4 5 6 7 8 9 10 1! 12 13 14 15 16 17 18 19 20 21 22 23 24 25 PART NO.
REPAIR PARTS 5 HP TINE SHIELD 14" TILLER -- MODEL NUMBER 917.299751 2 8 10 of 28 24 23 " " " 21 18 29 19 15 KEY PART NO, NO, 1 98000129 2 104086X417 3 8393J 4 12000036 5 72110508 6.
REPAIR TINES PARTS 5HP 14" TILLER -- MODEL NUMBER 917.299751 5 11 2_ 9 9 6 7 6 3 KEY PART DESCRIPTION NO. NO. t 73610600 Nut, Hex 3/8-24 2 STD551137 * Washer, Lock 3/8 3 4460J Tine, Outer, R.H° 4 74610616 Bolt, Hex 3/8-24x 1 5 132673 Pin, Shear 6 STD624008 * Clip, Hairpin KEY PART DESCRIPTION NO.
REPAIR PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 ENGINE, BRIGGS & STRATTON - - MODEL NUMBER 130202, TYPE NO. 3273-01 6t5 (_ 614 230 {2oI:,'91 = (_22 7 36 35 28.
REPAIR PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 ENGINE, BRIGGS & STRATTON - - MODEL NUMBER 130202, TYPE NO. 3273-01 163 191 526 621 12zA 124 392 29.
REPAIR PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 ENGINE, BRIGGS & STRATTON - - MODEL NUMBER 130202, TYPE NO. 3273-01 KEY PART NOo NO_ 1 395990 2 297565 3 299819 5 211542 7 272157 8 29.
REPAIR PARTS 5 HP 14" TILLER - - MODEL NUMBER 917.299751 ENGINE, BR|GGS & STRATTON -- MODEL NUMBER 130202, TYPE NO. 3273-01 KEY PART KEY PART NO_ NO.
S_ A/k S OWNER'S MANUAL MODEL NO. 917.299751 HOW TO ORDER REPAIR PARTS [RRFTXMRN 5.0 HP 14 INCH TINE WIDTH REAR TINE TILLER WITH COUNTER ROTATING TINES Each tiller has Its own model number.
Ein wichtiger Punkt beim Kauf des Geräts Craftsman 917-299751 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Craftsman 917-299751 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Craftsman 917-299751 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Craftsman 917-299751 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Craftsman 917-299751 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Craftsman 917-299751 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Craftsman 917-299751 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Craftsman 917-299751. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Craftsman 917-299751 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
