Benutzeranleitung / Produktwartung 45 Series des Produzenten Buhler
Zur Seite of 36
45 Series Rotary Tiller TABLE OF CONTENTS DESCRIPTION PAGE Warranty ............................................................................... 1 Introduction ........................................................................ 2 Safety ......
45 Series Rotary Tiller - 1 - WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper ap plications.
45 Series Rotary Tiller - 2 - INTRODUCTION Congratulations on your choice of a Buhler Farm King 45 Series Rotary - Tiller to complement your landscaping operation. This equipment has been designed and manufactured to meet the needs of a discerning landscaping industry for the efficient tilling of soil.
45 Series Rotary Tiller - 3 - SAFETY YOU are responsible for the SAFE operation and maintenance of your Buhler Farm K ing 45 Series Rotary - Tiller. YOU must ensure that you and anyone else who is goi.
45 Series Rotary Tiller - 4 - GENERAL SAFETY 1. Have a first - aid kit available for use and know how to use it should the need arise. 2. Have a fire extinguisher available for use and know how to use it should the need arise. 3. Wear appropriate protective gear.
45 Series Rotary Tiller - 5 - MAINTENANCE SAFETY 1. Follow ALL the operating, maintenance and safety information in the manual. 2. Support the machine with blocks or safety stands when working beneath it. 3. Follow good shop practices - Keep service are a clean and dry.
45 Series Rotary Tiller - 6 - How to Install Safety signs: * Be sure that the installation area is clean and dry. * Decide on the exact position before you remove the backing paper.
45 Series Rotary Tiller - 7 - SAFETY SIGN LOCATIONS – co nt’d. Safety sign “A” Safety sign “B” Safety sign “C” REMEMBER - If Safety signs have been damaged, removed, become illegible or parts replaced without safety sign s, new safety signs must be applied.
45 Series Rotary Tiller - 8 - OPERATION TO THE NEW OPERATOR OR OWNER The Buhler Farm King 45 Series Rotary Tiller is a machine that combines the primary and secondary tillage operat ion into one machine. It breaks up the soil and prepares the seed bed in one pass.
45 Series Rotary Tiller - 9 - MACHINE BREAK - IN Although there are no operational restrictions on the Tiller when used for the first time, it is recommended that the following mechanical items be checked: A. After operating for 1/2 hour or after completing 1/2 acre: 1.
45 Series Rotary Tiller - 10 - EQUIPMENT MATCHING To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor with the correct specifications. Use the following list as a guide in selec ting a tractor to use on the machine.
45 Series Rotary Tiller - 11 - DRIVELINE DIMENSION A PTO driveline is supplied with the machine. To accommodate the variety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but not bottom out when going through its working range.
45 Series Rotary Tiller - 12 - DRIVELINE DIMENSION - CONT'D. 7. Pull the driveli ne apart and cut 1/2 of the dimension determined in step 5 from each end. Add another ½ inch (12MM) to each cut off segment. 8. Be sure to use a hacksaw to cut 1/2 from each end of the separated shaft.
45 Series Rotary Tiller - 13 - ATTACHING/UNHOOKING The Tiller should always be located on a le vel, dry area that is free of debris and other foreign objects. When attaching the machine to a tractor, follow this procedure: 1. Clear the area of bystanders, especially small children.
45 Series Rotary Tiller - 14 - FIELD OPERATION Buhler Farm King 45 Series Rotary Tillers are designed with the inherent flexibility of operating well in almost any kind of soil and terrain conditions. However, the operator has the responsibility of being familiar with all operating and safety procedu res and following them.
45 Series Rotary Tiller - 15 - FIELD OPERATION - cont'd. 7. Align the unit with the working area. 8. Starting machine: a. Run the engine at low idle. b. Slowly engage the PTO control to start the machine. c. Slowly bring the engine to the rated PTO speed.
45 Series Rotary Tiller - 16 - FIELD OPERATION - cont'd. e. The rotation of the Tines propel the machine in the forward direction. Always use the tractor transmission to control the speed of forward travel. f. Always disengage the PTO control and raise the machine out of the ground before depressing the master clutch on the tractor.
45 Series Rotary Tiller - 17 - TRANSPORTING When transporting the machine, review and follow these instructions: 1. Be sure all bystanders a re clear of the machine. 2. Be sure that the machine is securely attached to the tractor and all retainer pins are installed.
45 Series Rotary Tiller - 18 - STORAGE After the season's use, the machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at the start of next season.
45 Series Rotary Tiller - 19 - SERVICE AND MAINTENANCE SERVICE Follow Maintenance Safety Instructions as outlined. FLUIDS AND LUBRICANTS 1. Hydraulic Oil: Use a standard hydraulic oil for all operating conditions. 2. Gear Box Oil : Use an SAE 85W90 gear oil for all operating conditions.
45 Series Rotary Tiller - 20 - SERVICING INTERVALS The periods recommended below are based on normal operating conditions. Severe or unusual condition s may require more frequent lubrication or oil changes. 8 Hours or Daily; Telescoping Tubes and Quick Disconnect 20 Hours 1.
45 Series Rotary Tiller - 21 - SERVICING INTERVALS – cont’d. 40 Hours 1. Check gear box oil level. Add as required 2. Add approximately 10 squirts of grease in chain case. Annually 1. Change gear box oil. Refill with SAE 85W90 gear oil. 2. Wash machine.
45 Series Rotary Tiller - 22 - MAINTENANCE By following a careful service and maintenance program for your machine, you will enjoy many years of trouble - free operation. A - FRAME ADJUSTMENT When moving the hitch along the front frame to adjust the offset, follow this procedure: 1.
45 Series Rotary Tiller - 23 - SLIP CLUTCH During normal operation, the slip clutch can release and slip when encountering an obstruction or when overloaded. It is designed to slip when the load exceeds 3 times its nominal rating. When the clutch slips too frequently during normal operating conditions, it is necessary to replace the clutch linings.
45 Series Rotary Tiller - 24 - TROUBLE SHOOTING The Buhler Farm King 45 Series Rotary Tiller moves curved Tines on a turning rotor through the ground to break it up and prepare a se ed bed. It is a simple and reliable system that requires minimal maintenance.
45 Series Rotary Tiller - 25 - ASSEMBLY The machine is shipped with the PTO shaft not installed. To install the PTO driveline on the machine, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Clean the splines on the yoke and the input shaft.
45 Series Rotary Tiller - 26 - BOLT TORQUE CHECKING BOLT TORQUE The tables shown below give correct torque values for various bolts and cap screws. Tighten all bolts to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide.
45 Series Rotary Tiller - 27 - 45 SERIES TILLER.
45 Series Rotary Tiller - 28 -.
45 Series Rotary Tiller - 29 - PARTS LIST WHEN ORDERING PARTS Always giv e your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part.
45 Series Rotary Tiller - 30 - 26 812364 1/2'' Lock Nut (pl) 27 967164 Pound - In Grease Fitting 28 84299 5/8'' x 2'' Hex Bolt (pl) 29 84270 5/8'' x 1 3/4'' Hex Bolt (pl) 30 812482 5 /8'' Lock Nut (pl) 31 907349 Safety Cone 32 903171 Spacer 1.
45 Series Rotary Tiller - 31 - 68 965911 7/16'' Linch Pin 69 967361 7/8'' x 4'' Clevis Pin (pl) 70 86171 3/8'' x 1 1/4'' Hex Bolt (pl) 71 811790 3/4&a.
45 Series Rotary Tiller - 32 - 45 SERIES TILLER GEARBOX - #906913 45 SERIES TILLER GEARBOX PARTS LIST ITEM PART NO. DESCRIPTION 906913 Gearbox Complete 1 907151 Housing 2 907152 Ball Bearing 3 967303 .
45 Series Rotary Tiller - 33 - PTO - F0409.
45 Series Rotary Tiller - 34 - 45 SERIES TILLER PTO PARTS LIST ITEM PART NO. DESCRIPTION F0409 Gearbox Complete (104 Series) 907193 Outer Half Shaft - Tracktor 907194 Inner Half Shaft - Implement 1 90.
45 Series Rotary Tiller - 35 - SHIPPING BUNDLES QUANTITY BUNDLE REQUIRED NUMBER DESCRIPTION C4560 60” Tiller c/w PTO 1 F0414 Deck Assembly C4572 72” Tiller c/w PTO 1 F0415 Deck Assembly OPTIONS F9.
Ein wichtiger Punkt beim Kauf des Geräts Buhler 45 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Buhler 45 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Buhler 45 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Buhler 45 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Buhler 45 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Buhler 45 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Buhler 45 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Buhler 45 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Buhler 45 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
