Benutzeranleitung / Produktwartung 6500/7600 des Produzenten Cisco Systems
Zur Seite of 134
CH A P T E R 6-1 Cisco 6500/7600 Series Manager User Guide 6 Logical Object Dialog Boxes This chapter describes the C6 5/76M dialog box es for the logical objects.
6-2 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes T able 6-1 Launch P oints for the C65/7 6M Dialog Bo xes Container Object Dialog Box Network Network Element All dialogs (und er the Cisco 65 00/7600 Series Manager menu entry) Phy sical Container (site, bay , shelf, etc.
6-3 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box C6576M NE Config/Mgmt Dialog Box The C6576M NE Conf ig/Mgmt dialog box pr ovides mo nitoring and management information for properties related to the Catalyst 600 0 family swi tch or Cisco 7600 series Int ernet Router .
6-4 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Operating System Area The Operating System area of the C6576M Networ k Element dia.
6-5 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box Figure 6-2 Confirmation Reset Window for a Networ k El ement Actions Area The Actions area of the C657 6M Network Element dialo g box provi des the follo wing information: • Commission button — Commissions t he object manually .
6-6 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box • discov erylostcomms—CEMF lost communication with the de vice during disco very , which occurs if the SNMP read community is in correct.
6-7 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box SNMP Tab Figure 6-4 sho ws the SNMP tab of the C6576M Netw ork Element di alog box.
6-8 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Cat OS SNMP Area The Cat OS SNMP area of the C6576M Network Element dialog box pro.
6-9 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box Trap Generation Area The T rap Generation area of the C6576M Netw ork Element dial og box pro vides the follo wing inform ation : • SNMP T rap Status—Indicates the le vel at which SNMP traps are enabled.
6-10 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Note An error is reported if a none xistent client is remo ved or if an existing client is added.
6-11 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NE Config/Mgmt Dialog Box.
6-12 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NE Config/Mgmt Dialog Box Additional Notes Tab Figure 6-7 sho ws the Additional Notes tab of the C657 6M Network Element dialog b ox.
6-13 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box C6576M Software Dialog Box This dialog box pro vides information on the IOS image and conf iguration of the switch or ro uter .
6-14 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Backup/Restore IOS Image Area The Backup/Restore IOS Image area of the C 6576M Softwar.
6-15 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figur e 6-9 Scheduled Backup/Rest ore IOS Imag e Dialog Bo x Note An alarm is gen erated if the Ba ckup Status an d Restore Status attributes are set to F ailed.
6-16 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Cat OS Image Tab Figure 6-10 sh ow s the Cat OS Image tab of the C6576M Softw are dialog box.
6-17 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box • Backup Source—The Cat OS image f ile to be backed up . Specify the full path to the imag e (for example, “slot 0:c6sup12-jsv-mz.121-6.
6-18 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Note An alarm is gen erated if the Backup Status and Restore Status attributes are set to Failed. (See Chapter 8, “ Alarm s and Alarm Mana gement.
6-19 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figure 6-13 P op-u p Menu Option to Edit the Run ning Configuration Fil e Startup Confi.
6-20 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Figure 6-14 Start up Configuration Window Action Report Running Configuration Area The.
6-21 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figur e 6-15 Running Configur ation Windo w Action Report Backup/Restore Configuration .
6-22 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox – Failed—The restore operati on failed. – Not ex ecuted—The restore operation was not ex ec uted. • Restore File—T he name of t he configuration file that will be restored.
6-23 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Cat OS Config File Tab Figure 6-17 sh ow s the Cat OS Conf ig File tab of the C657 6M Software dialog box.
6-24 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Figure 6-1 8 P op-u p Menu Option to Edit the Run ning Configuration Fil e Startup Con.
6-25 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Figure 6-1 9 Star tup Configuration Window A cti on Report • V ie w Running Configurat ion b utton—Displays the current running conf iguration in a te xt box (see Figure 6-20 ).
6-26 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Backup/Restore Configuration Area The Backup/Restore Conf iguration area of the C657 6.
6-27 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Software Dialog Box Ti p The configuration Backup/Restore actio ns are used to upload the swit ch or router startup con fi guration to a server . The configuration can then be edited on the server and do w nloaded back to the sw itch or router .
6-28 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Software Dialog B ox Additional Notes Tab Figure 6-23 sh ow s the Additional Notes tab of the C6576 M Software dialog b ox.
6-29 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Syslog Dialog Box C6576M Syslog Dialog Box This dialog box displays attrib utes for the system log messages on the switch or router . This dialog box can be launched from a Softwa re object or Syslog object within the Physical vie w .
6-30 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Syslog Dialog Box Syslog Message Details Area The Syslog Message Details area of the C6576M Syslog dialo g box prov ides the follo wing information: • Messages Not Recorded—The number of sysl og messa ges not recorded.
6-31 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Syslog Dialog Box Catalyst OS Tab Figure 6-25 sh ow s the Catalyst OS tab of the C65 76M Syslog dialog box. The Catalyst OS tab pro vides the follo wing information: • Facility—The f acility that generated the syslog message.
6-32 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Syslog Dialog Box Syslog Message Details Area The Syslog Message Details area of the C6576M Syslog dialo g box prov ides the follo wing information: • Messages Not Recorded—The number of sysl og messa ges not recorded.
6-33 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Syslog Dialog Box Additional Notes Tab Figure 6-26 sh ow s the Additional Notes tab of th e C6576M Syslog dialo g box.
6-34 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VTP Dialog Box C6576M VTP Dialog Box The VTP dialog box allo ws you to configur e VTP domains on the switch or router . This dialog box can be launched fro m a Software object or VT P object within th e Physical view .
6-35 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VTP Dialog Box • Max. VLAN Storage —Estimate of the maximum num ber of VLANs about which the local system can recove r complete VTP informa tion after a reboot.
6-36 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VTP Dialog Box Status Field The Status display-only fiel d located at the bottom of the windo w i ndicates the current state of the object.
6-37 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box C6576M VLAN Dialog Box This dialog box pro vides attributes for VLAN conf igurations. This dialog box can be launched from the Software object or VLAN object in the Physical view .
6-38 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box • mtuT ooBigForT runk—Indicat es that while this VLAN’ s MTU is supported b y this device, i t is too large for one or more of the device’ s trunk ports.
6-39 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box Figur e 6-31 Add VLAN Subdialog Bo x • Delete VL AN b utton—Deletes the currentl y selected VLAN . If you cli ck this butt on, you are asked to conf irm deletion of the cur rent VLAN (see Figure 6-32 ).
6-40 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box Configuration Tab Figure 6-33 sh ow s the Conf iguration tab of the C6576M VLAN dialog b ox. Figure 6-33 Configuration T ab for the C657 6M VLAN Dialog Box Configuration Area • MA C Address —MA C address of the VLAN interface.
6-41 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box VLAN Membership Tab Figure 6-34 sh ow s the VLAN Membership tab of the C6576M VLAN dialog box.
6-42 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box Figur e 6-35 Add/Remov e VLAN Members Subdialog Box.
6-43 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box Global Tab Figure 6-36 sh ow s the Global tab of th e C6576M VLAN dialog box. Figur e 6-36 Global T ab of th e C6576M VLAN Dialog Box 802.1Q Trunk Remapped VLANs Area This area list s the mappings between 8 02.
6-44 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box Figur e 6-37 Add/Remo ve VLAN Mapp ing Subdialog Bo x • 802.1Q VLAN Number —The 802.1Q VLAN number to be mapped. • ISL VLAN Number—Th e ISL VLAN to which th e 802.
6-45 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box STP Tab Figure 6-38 sh ow s the VLAN STP tab of the C6576 M VLAN dialog box.
6-46 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box • Current Root MA C—Bridge identif ier address. This is the MA C address of the VLAN on the root bridge in the STP instance. If there is no spanning tree instance for the VLAN, the v alue is nil.
6-47 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box QoS Tab Figure 6-39 sho ws the Qo S tab of the C657 6M VLAN di alog box.
6-48 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box • Enable VLAN-Based QoS button —Enables VLAN-based QoS on each of the VLAN’ s member interfaces. • Disable VLAN-Based QoS button —Disables VLAN-based QoS on each of t he VLAN’ s member interfaces.
6-49 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box VLAN Database Tab Figure 6-41 sho ws the VL AN Databa se tab of the C6 576M VLAN dialog box.
6-50 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M VLAN Dialog Box – Not ex ecuted—A restore has not been executed. • Restore File— Name of the file on the TFTP ser ver to which the VLAN configuration will be res t o re d f ro m .
6-51 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M VLAN Dialog Box Additional Notes Tab Figure 6-43 sh ow s the Additional Notes tab of the C6576 M VLAN dialog box.
6-52 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box C6576M EtherChannel Dialog Box This dialog box pro vides attributes for EtherCh annel conf igurations. This d ialog box can be launch ed from the Softw a re object or EtherChannel object s in the Physical vie w .
6-53 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box Note When a managed system initializes, al l interfaces start with Administrative Status in the do wn state.
6-54 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Configuration Tab Figure 6-45 sh ow s the Config uration tab of the C657 6M EtherChannel dialog box.
6-55 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box • Distribut ion Prot ocol—P rotocol used for load balancing on the EtherChannel. This f ield has the follo wing values: – ip—IP address.
6-56 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Membership Tab Figure 6-46 sh ow s the Membership tab of the C6576M Eth erChannel dialog box.
6-57 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box • Admin Group —In nati ve IOS, this is the EtherChann el identif ier that the interface belongs to (or the new EtherChannel to be creat ed).
6-58 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Routing Protocol Tab Figure 6-47 sh ow s the Routing Protocol tab o f the C6576M EtherChannel dial og box.
6-59 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box • Le vel 1 Hel lo Interv al—Length of time between hell o packets generated on the interf ace for lev el 1 routing.
6-60 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box – root – none • PortFast Enabled— Indicates whether or not an in terf ace is enabled to move directly to the forwarding st ate on link up.
6-61 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box – CatOS 6.3:Int eger(0..63) – CatOS 7.1:Int eger(1..63) • Cost—Describes the STP VLAN path cost of this interface. The VL AN path cost is only used on trunking interf aces.
6-62 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box Figur e 6-49 Add / Remov e Per VLAN S TP Setting Subdialog Bo x.
6-63 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box STP Status Area The STP Status area of the C6576M Eth ernet Interface di alog box p.
6-64 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box HSRP Area The HSRP area of the C6576M Ethernet Interface dialog box provides th e follo wing information: • HSRP Group T able —Describes HSRP groups deployed on an interface.
6-65 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box Figur e 6-51 HSRP Gr oup Configur e Subdialog Bo x Secondary IP Area The Secondary .
6-66 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EtherChannel Dialog Box – Hold Interval Figur e 6-52 HSRP Secondary IP Modify Subd ialog Bo x.
6-67 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EtherChannel Dialog Box Additional Notes Tab Figure 6-53 sho ws th e Additional No tes tab of the C6576M Ethe rChannel di alog box.
6-68 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box C6576M BGP Dialog Box The C6576M BGP dialog box provides inf ormation for the IOS Border Gate way Protocol (BGP). This dialog box can be launch ed from the Softwa re object or BGP object in the P hysical vie w .
6-69 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Figur e 6-55 BGP Enab le Dialog Bo x BGP Network Path Attribute Table Area The BGP Netwo rk Path Attribute T abl e area contains information abou t paths to destination network s receiv ed from all BGP pe ers.
6-70 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box • Degree of Prefer ence—D egree of preference for an advertised route.
6-71 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Neighbor Tab Figure 6-57 sh ow s the Neighbor tab of t he C6576M BGP dialo g box.
6-72 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box Figure 6-58 A d d or Remov e BGP P eer s Dialog Bo x.
6-73 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Redistribution Tab Figure 6-59 sh ow s the Redistrib ution tab of the C6576M BGP dialog box.
6-74 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box Default Metric Area This area ha s one attrib ute: • Default Met ric—Default metr ic used for route redist rib ution. This metric is used when and e xplicit metric is not gi ven during route redist ribut ion process.
6-75 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Distribution List Tab Figure 6-60 sh ow s the Distrib ution List tab of th e C6576M BGP dialog box.
6-76 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M BGP Dialog Box – GE-W AN <slot>/< port> – POS <slot>/<port> – A TM <slot&g.
6-77 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M BGP Dialog Box Additional Notes Tab Figure 6-61 sh ow s the Additional Notes tab of the C6576 M BGP dialog box.
6-78 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box C6576M OSPF Dialog Box The C6576M OSPF dialog box provides information fo r all IOS Open Shortest P ath First (OSPF) routing protocol processes.
6-79 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Note The Catalyst 6000 family switches and the Cisco 7600 ser ies Internet Routers support only three OSPF processes. Specify the OSPF Process ID (number only) and click Add to creat e the OSPF process on the switch or router .
6-80 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box Status Field The Status display-only fiel d located at the bottom of the windo w i ndicates the current state of the object.
6-81 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box – nssa—Similar to a stub area b ut autonomous system external rout es can be imported into the area. • Au t h . T y p e — A ut h e n t ic a t i o n t y pe f o r t h e ar e a .
6-82 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box Network Masks Area The table in this area displays the networks associ at ed with the selected OSPF process. This table contains the follo wing information: • Area ID—Area ID assign ed to the ne tworks and subnets.
6-83 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Global Tab Figure 6-67 sho ws the Global tab of the C6576M OSPF dialog box. Figur e 6-67 Global T ab of th e C6576M OSPF Dialog Bo x Global Network Configuration Table This describes the OSPF view of all interf aces on the router .
6-84 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box – disabled—Indicates th at the interf ace is ext ernal to OSPF . • T rans. Priority—The priority of this interf ace. Used in multiaccess netwo rks, this fi eld is used in the designated router el ection algor ithm.
6-85 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Neighbor Tab Figure 6-68 sho ws the Neighbor tab for the C6576M OSPF dialog box. Figure 6-68 Neighbor T a b of th e C6576M OSPF Dialog Bo x Global Neighbor Routers Area This area lists all OSPF neighbors for all OSPF processe s.
6-86 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box – exch ange – loading – full • Neighbor Entry Status—This v ariable displays the status o f the entry . Setting the variable t o “in valid” can make it inoperati ve.
6-87 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Redistribution Tab Figure 6-70 sho ws the Redistribution t ab of the C6576M OSPF dialog box.
6-88 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box Redistribution Table Area This area describes the route redistr ibuti on conf igur ation of the OSPF routing process. Rou tes learned from other interior and e xterior routing protocols may be redistrib uted into the OSPF routing domain.
6-89 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Distribution List Tab Figure 6-71 sho ws the Distribution List tab of the C6576M OSPF dialog box.
6-90 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M OSPF Dialog Box – GigabitEtherne t <slot>/<port> (Nati ve IOS only) – GE-W AN <slot>/.
6-91 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M OSPF Dialog Box Additional Notes Tab Figure 6-72 sho ws the Additional Notes tab of the C6576M OSPF dialog box.
6-92 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box C6576M EIGRP Dialog Box The C6576M EIGRP dialog box provides informati on on the Enhanced Interior G ate way Routing Protocol (EIGRP) enab led in IOS.
6-93 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box • Stuck In Acti ve—Length of time (in m inutes) that a rout e stays acti ve. Th is v al ue d et er min es th e maximum period of time that an EIG RP router will wait fo r replies to it s queries.
6-94 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box Local Networks Area This area describes the netw orks supported b y EI GRP . EIGRP will send routin g updates on the interfaces in the n etworks.
6-95 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box Status Field The Status display-only fiel d located at the bottom of the wind ow indicates the curren t state of the object.
6-96 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box • Source ID—Identif ies the routing process from which routes are bein g distrib uted. This f ield may have the following v a lues: – IS-IS—This is either an implicit null tag or the t ag of a named IS-IS rout ing process.
6-97 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box Edit Redistribution Table Area This area allo ws changes to be made to the attribut es sho wn in the Redistrib ution T able. These attr ibutes are discussed in detail in the “Redistrib ution T able Area” section on page 6-95 .
6-98 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M EIGRP Dialog Box Figure 6-77 Distr i bution List T ab of the C6 576M EIGRP Dialog Box Distribution List Table Area This area describes f iltering of routing updates sent or recei ved by the routing process.
6-99 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M EIGRP Dialog Box – POS <slot>/<port> – A TM <slot>/<subslot>/<port> – P.
6-100 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M IS-IS Dialog Box Figure 6-78 Additional Notes T ab of the C6576M EIGRP Dialog Box Notes Area The Notes area is a text box that allows you to type in addition al notes for the object .
6-101 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M IS-IS Dialog Box Figur e 6-79 Details T ab of C65 76M IS-IS Dialog Bo x Global Area The Global area of the C6576M IS-IS dialog box pro vides the follo wing information: • CLNS Enabled—Indicates whether or not CLNS routing is enabled on the de vice.
6-102 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M IS-IS Dialog Box • Add Ne w IS-IS button—Creates an IS-IS routing process on the managed de vice. • Remove IS-IS button—Deletes the currently selected IS-IS object.
6-103 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M IS-IS Dialog Box Figur e 6-80 Interf aces T ab of C6576M IS-IS Dialog Box Interface List Area The Interface List area of the C6576M IS-IS dialog box lists the interfaces supported by a gi ven IS-IS routing proc ess.
6-104 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M IS-IS Dialog Box Redistribution Tab Figure 6-81 sh ow s the Interfaces tab of th e C6576M IS-IS dialog box.
6-105 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M IS-IS Dialog Box The Add and Remov e buttons enable and disabl e route redistrib ution from another IP routing process into the IS-IS area, respectiv ely .
6-106 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NDE Configuration Dialog Box C6576M NDE Configuration Dialog Box The C6576M NDE Conf iguration dialog box pro vides information on the Netflo w Data Export (NDE) confi guration on a Catalyst 60 00 family swi tch or a Cisco 7600 series Internet Router .
6-107 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NDE Configuration Dialog Box PFC Area The PFC area of the C6576M NDE dialog box provides the fo llo wing i.
6-108 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NDE Configuration Dialog Box • PFC Modify b u tton—Modif ies the source address used in the NDE packets containin g statistics from the PFC.
6-109 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M NDE Configuration Dialog Box Include Area This area allo ws you to specify in clude parameters for the NDE flo w filters. This area consist s of the follo wing parameters: • Source IP—Include flo w filter source host IP address.
6-110 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M NDE Configuration Dialog Box The follo wing buttons implement the conf iguation changes: • Modify Filter—App lies the NDE conf iguration chan ges. • Remov e Filter—Remov es a configur ed NDE Include or Ex clude Flo w Mask filter .
6-111 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M STP Dialog Box C6576M STP Dialog Box The C6576M STP dialog box pr ovides info rmation on the global Span ning T ree Protocol configurati on on a managed Catalyst 6000 family sw itch or Cisco 7600 seri es Internet Router .
6-112 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M STP Dialog Box • Station-Learning Generating Ra te—The maximum number of station-learning frames that the dev ice will generate in each 100-milisecond p eriod after an UplinkF ast transition.
6-113 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M ACL Configuration Dialog Box C6576M ACL Configuration Dialog Box The C6576M A CL dialog box describes a numbered or named access control list (A CL) on a Catalyst 6000/6500 s eries switch or Cisc o 7600 series Intern et Router .
6-114 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M ACL Configuration Dialog Box • Remark—Mandatory comment that de scribes the access list entry , up to 100 characters long.
6-115 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M ACL Configuration Dialog Box • Add Filter b utton—Launches the Add Filter subdialog box, sho wn in Figure 6-90 , to ap pend a permit or deny filter to an A CL.
6-116 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M ACL Configuration Dialog Box • Source Port—The decimal number or name of a source TCP or UDP port. TCP port names can only be used when f iltering TCP . UDP port names can only b e used when f iltering UDP .
6-117 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M Loopback Dialog Box Notes Area The Notes area is a text box that allo ws you to type in additional notes f.
6-118 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M Loopback Dialog Box Layer 3 Subarea • IP Address—IP address of the inte rface. A v alue of 0.0.0.0 indicates that no IP address has been configured on the interf ace.
6-119 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box Notes Area The Notes area is a text box that allo ws you to type in additional notes for the obj ect.
6-120 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box • Microflow Enabled—Indicates whether o r not Microflow policing is ena bled on the device. This enables QoS policing against Layer 3 switched traff i c flows.
6-121 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box Named Aggregate Tab Figure 6-96 sh ow s the Named Aggreg ate tab of the C6576M QoS di alog box.
6-122 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box • Conform Action—Action to b e taken when traf fic conforms to QoS parameters.
6-123 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box Figur e 6-97 QoS Aggr egat e Add Subdialog Box of the C6576M QoS Dialog Bo x • Remove button—Deletes one or more aggregrate po licers on the ma naged de vice selected in the Named Policers T able.
6-124 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box Class Maps Tab Figure 6-98 sh ow s the Class Maps tab of the C6576M QoS di alog box.
6-125 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Dialog Box • Match DSCP—Specif ies DSCP va lues to match. Up to eight v alues may be specifi ed. If no v alues are specified, DSCP matching criter ia is disab led.
6-126 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Dialog Box Additional Notes Tab Figure 6-100 sho ws the Additional Notes tab of the C657 6M QoS dialog box.
6-127 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box C6576M QoS Policy Map Dialog Box The C6576M QoS Polic y Map dialog box describes a quali ty of service (QoS) poli cy map on a Catalyst 6000/6500 series or Cisco 7600 series Internet Ro uter .
6-128 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box Figur e 6-1 02 P olicy Map A dd Subdialog Bo x of C6576M QoS P olicy Map Dialo g.
6-129 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box Policy Map Classes Tab Figure 6-103 sho ws the Policy Map Cl asses tab of the C6576M QoS Pol icy Map d ialog box.
6-130 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box Figure 6-1 04 P olicy Map Add Class Subdialog Bo x of C6576M QoS P olicy Map Dialog Bo x The follo wing is shown in this sub dialog box.
6-131 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box • Burst—No rmal burst size, in bytes, to enfor ce against polic ed traffic. This v a lue is mandato ry when def ining an expl icit policer .
6-132 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box • Max. Burst—Maximum b urst size, in bytes, in bytes to enfo rce against policed traf fic.A v alue of 0 is returned on r ead if an expl icit policer is not defi ned for the polic y map class.
6-133 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object Dia log Boxes C6576M QoS Policy Map Dialog Box • Microflo w Enabled—Indicates wheth er or not a Microflo w policer is defined for the polic y map class. This enables QoS policing against Layer 3 switched traf f ic flo ws.
6-134 Cisco 6500/7600 Series Manager User Guide Chapter 6 Logical Object D ialog Boxes C6576M QoS Policy Map Dialog Box Additional Notes Tab Figure 6-105 sho ws the Additional Notes tab of the C6 576M QoS Polic y Map dialog box.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems 6500/7600 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems 6500/7600 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems 6500/7600 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems 6500/7600 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems 6500/7600 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems 6500/7600 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems 6500/7600 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems 6500/7600. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems 6500/7600 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
