Benutzeranleitung / Produktwartung 1300 Series des Produzenten Cisco Systems
Zur Seite of 146
Corporate Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 526-4100 Cisco Air onet 1 30 0 S er.
THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 CONTENTS Preface ix Objectives ix Audience ix Organization ix Conventi ons x Related Publication s xii Obtaining Documentation xii Cisco.
Contents iv Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Access Point Configuration 1-8 Workgroup Bridge Configuratio n 1-9 CHAPTER 2 Installation Overv.
Contents v Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 CHAPTER 5 Configuring the Access Point/Bridge for the Fir st Time 5-1 Before You Start 5-2 Rese.
Contents vi Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Enabling and Disabling Editing Features 6-8 Editing Commands Through Keystro kes 6-8 Editing Co.
Contents vii Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Statement 1022—Disconne ct Device A-7 Statement 1024—Ground Condu ctor A-9 Statement 1030.
Contents viii Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 APPENDIX F Load-Dump Protectio n for Transportation Vehicles F-1 Load-Dump Protection F-1 G L.
ix Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Preface This section describes the objecti ves, au di ence, org anization, and con ventions of the Cisco Ai r onet 1300 Series Outdoor Access P oint /Bridge Har dwar e Installation Guide .
x Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Preface Conventions Appendix A, “T ranslated Safety W arnings,” lists translations of the safety w arnings in this pub lication.
xi Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Preface Conventions Attention Ce symbole d’avertissement in dique un danger .
xii Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Preface Related Publications Related Publications For more inf ormation about access point/bridges an d.
xiii Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Preface Documentation Feedback Y ou can access the Cisco website at this URL: http://www .cisco.com Y ou can access international Cisco websites at this UR L: http://www .
xiv Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Preface Cisco Product Security Overview Cisco Product Security Overview Cisco provides a free online Security V u lnerability Policy portal at this URL: http://www .
xv Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Preface Obtaining Technical Assistance Cisco Technical Support Website The Cisco T echni cal Support W ebsite provides onlin e documents and to ols for troubleshoot ing and resolving technical issues with Cisc o pro ducts and technologies.
xvi Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Preface Obtaining Technica l Assistance The power injector serial nu mber is located on the bott om of the cabinet (refer to Figure 2 ).
xvii Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Preface Obtaining Additional Public ations and Information Definitions of Service Request Severity T o ensure that all servi ce requests ar e reported in a standard format, Cisco has establi shed sev erity definitions.
xviii Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Preface Obtaining Additional Publ ications and Information • W orld-class networking training is a v ailable from Cisco. Y ou can vie w current of ferings at this URL: http://www .
CH A P T E R 1-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 1 Overview The Cisco Aironet 1300 Series Outdoor A ccess Point/Bridge (hereafter called the access point/bridg e ) is a wireless de vice designed for b uilding-to-b uilding wireless connect ivity .
1-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 1 Overvi ew Key Features Key Features K ey features of the access point/bridge: • Unlicensed IEEE 802.
1-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 1 Overview Key Features Note Antenna connectors are a v ailable only on the e xternal antenna access point/ bridge conf iguration.
1-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 1 Overvi ew Key Features External Antenna The access point/bridge is av ailable in an external antenna configuration (see Figure 1-1 ) for use with Cisco Aironet 2.
1-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 1 Overview Key Features Figur e 1 -2 A ccess P oint/Brid g e Connector Locations LEDs Four LE.
1-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 1 Overvi ew Key Features • The install LED indicates that installation mode is acti v ated. During installation mode, th e other LEDs provid e signal strength readi ngs used for antenna alignment.
1-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 1 Overview Network Configuration Examp les Network Configuration Examples This section descri bes the access point/bridge’ s role in fi ve common wireless network conf igurations.
1-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 1 Overvi ew Network Config uration Example s Point-to-Multipoint Bridge Configuration The point-to-multipoi nt bridge conf iguration ( Figure 1-6 ) connects the main LAN network to multiple remote LAN networks.
1-9 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 1 Overview Network Configuration Examp les Workgroup Bridge Configuration When config ured in.
1-10 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 1 Overvi ew Network Config uration Example s.
CH A P T E R 2-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 2 Installation Overview This chapter pro vides warn ings, safety informatio n, an d information needed befo re you begin the installation of your access poin t/bridge system.
2-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 2 Instal lation Overview Safety Warnings Safety Warnings T ranslated versions of the follo win g safety warnings are provided in Appendix A, “T ranslated Safety W arnings.
2-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 2 Installation Overview Safety Information War ni n g Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits.
2-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 2 Instal lation Overview Safety Information Safety Precautions War ni ng Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits.
2-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 2 Installation Overview Installation Guidelines Typical Outdoor Installation Components The access point/bridge is designed to be installed in an outdoor envi ronment, typically on a tower or a tall b uilding.
2-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 2 Instal lation Overview Site Surveys Site Surveys Every netw ork application is a un ique installation.
2-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 2 Installation Overview Before Beginning the Installation The optional roof moun t kit contains these items: • One roof-wall mount • T wo dual-coax cables [20 ft (6.
2-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 2 Instal lation Overview Before Beginning the Installation Figur e 2-2 Access P oin t/ Br idge .
2-9 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 2 Installation Overview Installation Summary Figur e 2-4 P ow er Module Figur e 2-5 Gr oundin.
2-10 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 2 Instal lation Overview Installation Summary • For outdoor installat ions, connect the dual-c oax Et hernet cables betw een the po wer injector and the grounding block.
2-11 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 2 Installation Overview Installation Summary • Seal all external connectors with sp ecial weather sealing material. Config ure security and other access point/bridge op tions.
2-12 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 2 Instal lation Overview Installation Summary.
CH A P T E R 3-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 3 Mounting and Alignment Overview This chapter provides an ov ervie w of the access poi nt/bridge mounting and bridge antenna alignment.
3-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 3 Mounting and Alig nment Overview Mounting the Access Point/Bridge Mounting the Access Point/Bridge T ypically , the access point/bridge is installed o n a rooftop, mast, to wer , wall , or a suitable flat surface.
3-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 3 Mounting and Alignment Overview Mounting Hardware Window Mounting When a wireless link is deployed through a window , significant signal loss ca n be introduced b y the windo w .
3-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 3 Mounting and Alig nment Overview Mounting Hardware Figure 3-1 Multi-Function Mount Access Point/Bridge Bracket The access point/bridge b racket mounts on the b ack side of the unit housing.
3-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 3 Mounting and Alignment Overview LEDs LEDs The LEDs indicate the startup status , operating mode, assoc iation status , and recei ved signal strength.
3-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 3 Mounting and Alig nment Overview LEDs The Install LED provi des bridge association status during installation m ode as shown i n Ta b l e 3 - 2 .
3-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 3 Mounting and Alignment Overview Aligning the Bridge Antenna Using RSSI LED Indica tions Ali.
3-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 3 Mounting and Alig nment Overview Aligning the Bridge Antenn a Using RSSI LED Indications.
CH A P T E R 4-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 4 Using the Web-Browser Interface This chapter describes the web-browser interface that you can use to configure the access point/bridge.
4-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 4 Using th e Web-Browser Interface Using the Web-Browser Interface Management Page s Using the .
4-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 4 Using the Web-Br owser Interface Using the Web-Browser Interface Man agement Pages Using Action Buttons Ta b l e 4 - 1 lists the page links and b uttons that appear on most man agement pages.
4-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 4 Using th e Web-Browser Interface Using the Web-Browser Interface Management Page s Character .
4-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 4 Using the Web-Br owser Interface Connecting Locally to the Ethernet Port Connecting Locally.
4-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 4 Using th e Web-Browser Interface Connecting Locally to the E thernet Port.
CH A P T E R 5-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 5 Configuring the Access Po int/Bridge for the First Time This chapter describes h ow to conf igure basi c settings on your access point /bridge for the f irst time us ing the web-browser interface.
5-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Before You Start Before You Start Bef.
5-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 5 Configuring the A ccess Point/Bridge for the First Time Default SSID and Default Role When you connect an access point/bri dge running Cisco IOS Release 12.
5-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Connecting to the Acc e ss Point/Brid.
5-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 5 Configuring the A ccess Point/Bridge for the First Time Assigning Basic Setting s Assigning.
5-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Assigning Basic Settings Step 4 Click Express Setup . The Express Setup page displays. Figure 5-2 sho ws the Express Setup page .
5-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 5 Configuring the A ccess Point/Bridge for the First Time Assigning Basic Setting s • IP Subnet Mask —Enter the IP sub net mask provided b y your net work administrat or so that the I P address can be recognized on the LAN.
5-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Assigning Basic Settings • Aironet .
5-9 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 5 Configuring the A ccess Point/Bridge for the First Time Adjusting Output Power Level Enabling the Radio Interfaces In Cisco IOS Release 12.3(4)J A, th e access point/bridge radios are disabled by default, and there is no default SSID.
5-10 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Configuring Basic Security Settings Figure 5-3 sho ws the Express Security page.
5-11 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 5 Configuring the A ccess Point/Bridge for the First Time Configuring Basic Security Setting.
5-12 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Configuring Basic Security Settings .
5-13 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 5 Configuring the A ccess Point/Bridge for the First Time Finding the IP Address Using the C.
5-14 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 5 Config uring the Access Point/Bridge for the First Time Assigning an IP A ddress Using the C.
CH A P T E R 6-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 6 Using the Command-Line Interface This chapter describes the IOS command-line interf ace (CLI) that you can use to conf igure your access point/bridge.
6-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 6 Using the Comman d-Line Interface Connecting to the Console Serial Port Connecting to the Con.
6-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 6 Using th e Command- Line Interface Using a Telnet Session to Op en the CLI http://www .cisco.com/uni ve rcd/cc/td/doc/product/ wireless/inde x.
6-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 6 Using the Comman d-Line Interface IOS Command Modes IOS Command Modes The Cisco IOS user interface is di vided into many dif ferent modes. The commands av ailable to you depend on which mode y ou are currently in.
6-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 6 Using th e Command- Line Interface Getting Help Getting Help Y ou ca n enter a question mark (?) at the system prompt to display a list of commands a v ailable for each command mo de.
6-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 6 Using the Comman d-Line Interface Understanding CLI Messages Config uration commands can also h av e a default form. The default form of a command returns the command setting to its def ault.
6-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 6 Using th e Command- Line Interface Using Comman d History Changing the Command History Buffer Size By default, the access po int/bridge records ten co mmand lines in its history buf fer .
6-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 6 Using the Comman d-Line Interface Using Editing Features Using Editing Features This section descri bes the editing features that can help you manipu late the command line.
6-9 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 6 Using th e Command- Line Interface Using Editing Features Editing Command Lines That Wrap Y ou can use a wrap-around feat ure for commands that extend be yond a sing le line on the screen.
6-10 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 6 Using the Comman d-Line Interface Searching and Filteri ng Output of show and more Commands In this e xample, the access-list global conf iguration command entry extends beyond one l ine.
6-11 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 6 Using th e Command- Line Interface Assigning an IP Address Using th e CLI Assigning an IP .
6-12 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 6 Using the Comman d-Line Interface Finding the Access Point/Bridge IP Address Using the CLI.
CH A P T E R 7-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 7 Troubleshooting This chapter pro vides troublesho oting procedures for basic prob lems with the access point/bridge.
7-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Checking the LEDs Checking the LEDs If your access point/bridge is no t associating with a remote bridge or access point, check the four LEDs on the back panel.
7-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 7 Troubleshooting Checking the LEDs The access point/bridge uses a blinking code to identify various error conditions.
7-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Checking the LEDs The LED blinking error codes are described i n Ta b l e 7 - 2 .
7-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 7 Troubleshooting Power Injector Power Injector When the po wer injector is po wered up , it applie s 48-VDC to the dual-coax cables to the access point/bridge.
7-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Checking Power Checking Power Y ou can verify the a vailability of po wer to .
7-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 7 Troubleshooting Checking Basic Configura tion Settings Note In Cisco IOS Release 12.3(4)J A, you must create an SSID and e nable the radio before the access point/bridge allo ws wireless associations fr om other de vices.
7-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Antenna Alignment Security Settings Remote Cisco Aironet bridges or client de.
7-9 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 7 Troubleshooting Running the Pi ng or Link Test Step 3 Choose the radio interf ace by clicking Ra dio0-802.11G . The radio status page appears.
7-10 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Resetting the Ac cess Point/Bridge to th e Default Configuration Resetting t.
7-11 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 7 Troubleshooting Reloading the Access Point/Bridge Image Step 4 Enter Y when the follo wing CLI message displays: Pr oceed with r eload? [conf irm] .
7-12 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Reloading the Access Point/Bridge Image Step 6 Click the System Software tab an d then click Softwar e Upgrade . The HTTP Upgrade page appears.
7-13 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installati on Guide OL-5048-02 Chapter 7 Troubleshooting Reloading the Access Point/Bridge Image Obtaining the Access Point/Bridge Image File Y ou can obtain the access point/bridge image f ile fro m the Ci sco.
7-14 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Chapter 7 Troubleshooting Reloading the Access Point/Bridge Image.
A-1 Cisco Aironet 1300 Series Outdoor Access Po in t/Bridge Hardware Installation Guide OL-5048-02 APPENDIX A Translated Safety Warnings This appendix pro vides translations of th e safety warnin gs that appear in this publication. These translated warn ings apply to other documen ts in which the y appear in English.
A-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 84—Warning Definition Statement 84—Warning Definition War ni ng This warning symbol means danger . Y ou are in a situation that could cause bodily injury .
A-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 245B—Explosive Device Proximity Wa rning Statement 245B—Explosive Device Proximity Warning Avi s o Este símbolo de aviso in dica perigo.
A-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 346—RF Exposure Limits Statement 346—RF Exposure L.
A-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1001—Work During Lightning Activity Statement 1001.
A-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1005—Circuit Breaker Statement 1005—Circuit Breaker Avis o Não trabalhe no sistema o u ligue e desligue cabos duran te períodos de mau tempo (trovoada).
A-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1022—Disconnect Device Statement 1022—Disconnect Device Avi so Este produto depende das instalaç ões existentes para proteção con tra curto-circuito (sobrecarga).
A-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1022—Disconnect Device Avis o Deverá incorporar -se um dispositivo de desconexão de dois pólos de acesso fácil, na instalação eléctrica fixa.
A-9 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1024—Gr ound Conductor Statement 1024—Ground Conductor War ni n g This equipment must b e grounded.
A-10 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1030—Equipment Installation Statement 1030—Equipment Installation War ni ng Only trained and qualified p ersonnel should be allowed to install, replace, o r service this equipment.
A-11 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1030—Equipment Instal lation ¡Advertencia! Solamente el personal calif icado debe instalar , reemplazar o utilizar este equipo.
A-12 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1033—SELV-IEC 60950 DC Power Supply Statement 1033.
A-13 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1040—Product Disposal Statement 1040—Product Disposal War ni n g Ultimate disposal of this product should be handl ed according to all national laws and regulat ions.
A-14 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1040—Product Disposal Avis o O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais.
A-15 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1052—Installing and Grounding the Antenna Statemen.
A-16 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1052—Installing and Grounding the Antenna Advarsel .
A-17 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1052—Installing and Grounding the Antenna.
A-18 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix A Tran slated Safety Warnings Statement 1052—Installing and Grounding the Antenna.
B-1 Cisco Aironet 1300 Series Outdoor Access Po in t/Bridge Hardware Installation Guide OL-5048-02 APPENDIX B Declarations of Conformity and Regulatory Information This appendix pr ovides decl arations of conform ity and re gulatory informati on for the Cisco Aironet 1300 Series Access Point/Bri dge.
B-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Conformity and Regul atory Informatio n Manufacturers Federal Communication .
B-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Confo rmity and Regulatory Informa tion Department of Communications—Can .
B-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Conformity and Regul atory Informatio n European Commun ity, Switzerland, No.
B-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Confo rmity and Regulatory Informa tion Declaration of Confor mity for RF E.
B-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Conformity and Regul atory Informatio n Administrative Rules for Ci sco Ai ronet Access Points and Bridges in Taiwan 3.
B-7 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Confo rmity and Regulatory Informa tion Administrative Rules for Cisco Airo.
B-8 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix B Declarations of Conformity and Regul atory Informatio n Administrative Rules for Ci sco Ai r.
C-1 Cisco Aironet 1300 Series Outdoor Access Po in t/Bridge Hardware Installation Guide OL-5048-02 APPENDIX C Access Point/Bridge Specifications This appendix pro vides technical specif i cations for the access point/b ridge , power injector , and power module.
C-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix C Ac cess Point/Bridge Specifications Operation al V ibration SAE J1455 Po wer injector : SAE .
C-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix C Access Point/Bridge Spec ifications Data rates IEEE 802.
C-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix C Ac cess Point/Bridge Specifications Bridge Operating Range Each regulato ry region limit s the equi valent i sotropic radiated po wer (EIRP) that can be supported within their r egion.
C-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix C Access Point/Bridge Spec ifications T able C-3 Calculat ed Maximum Operating Rang e (in miles) for IEEE 802.
C-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix C Ac cess Point/Bridge Specifications.
D-1 Cisco Aironet 1300 Series Outdoor Access Po in t/Bridge Hardware Installation Guide OL-5048-02 APPENDIX D Channels and Antenna Settings This appendix lists the IEEE 802. 11g (2.4-GHz) channels , maximum power lev els, and antenna gains supported by t he world’ s regulatory domains.
D-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix D Channels and Antenn a Settings Channels Channels IEEE 802.11g (2.4-GHz Band) The channel identifiers, channel center frequencies, and re gu latory domains of each IEEE 802.
D-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix D Channels and Antenn a Settings Maximum Power Levels a nd Antenna Gains Maximum Power Levels and Antenna Gains IEEE 802.
D-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix D Channels and Antenn a Settings Maximum Power Levels and Antenna Gain s Changing the Access P.
D-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 Appendix D Channels and Antenn a Settings Maximum Power Levels a nd Antenna Gains Step 9 On the OFDM T ransmit Po wer (mW) s e tt i ng , s e le c t the maxim um OFDM power allo wed for your antenna in your re gulatory re gion.
D-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix D Channels and Antenn a Settings Maximum Power Levels and Antenna Gain s.
E-1 Cisco Aironet 1300 Series Outdoor Access Po in t/Bridge Hardware Installation Guide OL-5048-02 APPENDIX E Console Serial Cable Pinouts This appendix identif ies the pinou ts for the console serial cable that connects to the power injector’ s console serial port.
E-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix E Co nsole Serial Cable Pinouts Overview Overview The access point/bridge requires a sp ecial serial cable that connects th e power injector’ s console serial port (RJ-45 conn ector) to your PC’ s COM port (DB-9 connector).
F-1 Cisco Aironet 1300 Series Outdoor Access Po in t/Bridge Hardware Installation Guide OL-5048-02 APPENDIX F Load-Dump Protection for Transportation Vehicles This appendix descri bes load-dump protecti on that is required for access po int/bridge operation in some transportation v ehicles.
F-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 Appendix F Load-Du mp Prot ection for Transportation Vehicles Load-Dump Protectio n War ni ng Connect the unit only to a DC power source that complies with the safety extra-low voltag e (SEL V) requirements in IEC 60950 based safety standards.
GL-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 GLOSSARY Numeric 802.11 The IEE E standard that specifies carrier sense media access control and physical layer specif ications for 1- and 2-me gabit-per -second (Mbps) wireless LANs op erat ing in the 2.
Glossary GL-2 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 broadcast packet A single data message (packet) sent to all addresses on the same subnet. bridge A wireless LAN transceiv er that is used to connect tw o or more wired Ethernet netw orks.
Glossar y GL-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 E EAP Extensible Authen tication Protocol. An optional IEEE 802.1x secu rity feature ideal for org anizations with a lar ge user base and access to an EAP-enable d Remote Authentication Dial-In User Service (RADIUS) se rver .
Glossary GL-4 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02 multipath The echoes created as a radi o signal bounce s off of physical objects. multicast packe t A single data message (packet) sent to multiple ad dresses.
Glossar y GL-5 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 RP-TNC A connector type u nique to Cisco A ironet radios and an tennas. Part 15.203 of the FCC rules cov ering spread spectrum de vices limits the types of antennas that may be u sed with transmission equipment.
Glossary GL-6 Cisco Aironet 1300 Series Outdoor Access Point/Bridge Hardware Installation Guide OL-5048-02.
IN-1 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 INDEX A abbreviating commands 6-5 antenna gains D-3 antennas C-3 Apply button 4-3 audience ix B Back .
Index IN-2 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Install ation Guide OL-5048-02 F FCC Declaration of Conformi ty B-2 FCC Safety Compliance 2-3 filtering, show an d more comma.
Index IN-3 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Installation Guide OL-5048-02 T Telnet 5-14, 6-3 temperat ure, operat ing C-1 terminal emulator 5-4 troubleshooting 7-1 U unp.
Index IN-4 Cisco Aironet 1300 Series Outdoor Access Po int/Bridge Hardware Install ation Guide OL-5048-02.
Ein wichtiger Punkt beim Kauf des Geräts Cisco Systems 1300 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cisco Systems 1300 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cisco Systems 1300 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cisco Systems 1300 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cisco Systems 1300 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cisco Systems 1300 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cisco Systems 1300 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cisco Systems 1300 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cisco Systems 1300 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.