Benutzeranleitung / Produktwartung 70630 des Produzenten AEG
Zur Seite of 56
ÖKO-LAVAMA T 7 0630 update The envir onmentally friendly washing machine User information.
2 Dear Customer , Please read this user information car efully . P ay particular attention to the section "Safety" on the fir st Info pages. Please keep this user information in a safe place for later refer ence. P ass it on to any future owners of the unit.
3 Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . .
4 Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Separate Conditioning / Starching / Impregnating .
5 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Permissible water pressure .
Operating Instructions 6 Oper ating Instructions 1 Safety The safety aspects of AEG electrical appliances comply with accepted technical standar ds and the German Appliance Safety Law . However , as manufacturer s we regar d it as our responsibility to inform you about the following safety instructions.
Operating Instructions 7 Child Safety • P ackaging materials (e.g. films, polystyrene) can be danger ous for children. Risk of suffocation! K eep packaging away from childr en. • Children fr equently cannot recognise hazard s involved in handl ing electrical appliances.
Operating Instructions 8 2 Disposal Disposing of the Packaging Material! Dispose of the packaging of your washing machine correctly . All pakka- ging materials used are envir onmentally-compatible and recyclable.
Operating Instructions 9 Unit description Fr ont view Dr awer for detergent and car e agent Drawer for de- tergent and care agent Main door Screw feet (height-adjustable) Control panel Flap in front o.
Operating Instructions 10 Contr ol panel Pr ogram Selector The progr am selector dete rmines the type of washing cycle (e. g. water level, drum movement, number of rinses, spin speed) ac- cording to the type of garments being washed, and also the washing solution.
Operating Instructions 11 EASY -CARES Main washing cycle for easy-care textiles (mixed fabrics) at 40 ° C to 60 ° C. EASY IRON position: Main washing cycle at 40 ° C for easy-care textiles which, with the aid of this progr am, only have to be either gently ironed or not ir oned at all.
Operating Instructions 12 Additional pr ogram buttons The additional progr am buttons are for adapting the washing pr ogram to the dirtiness of the washing. Additional progr ams are not r equired for washing which is not excessively dirty . Va rious functions can be combined with each other , depending on the pr ogram.
Operating Instructions 13 Consumption V alues and Time Requir ements The values for selected progr ams in the following tables were deter- mined under normal conditions.
Operating Instructions 14 What does "UPDA TE “ mean? Y our washing machine's washing progr ams are controlled by softwar e. New types of textiles or new detergents may r equire new washing pr o- grams in the future. In most cases, the softwar e can be adapted to this.
Operating Instructions 15 Pr epar e washing cycle Sort washing and pr epare • Sort the washing according to the car e symbol and type (see "Wash- ing types and care codes"). • Empty all pockets. • Remove metal objects (paper clips, safety pins etc.
Operating Instructions 16 W ashing Types and Car e Codes The care codes help you choose the correct washing pr ogram. The washing should be sorted according to type and car e code.
Operating Instructions 17 W ashing Detergents and Car e Agents Which washing deter gent and care agent ? Use only washing detergents and car e agents which are suitable for use in washing machines.
Operating Instructions 18 Run a W ashing Cycle Brief Instructions A washing cycle is run in the following steps: 0 1. Set the correct washing pr ogram: – Set the progr am and temperatur e with the progr am selector – Set any additional progr am(s) 2.
Operating Instructions 19 Setting the Washing Pr ogr am 3 For the suitable progr am, the correct temper ature and possible addi- tional pr ograms for the particular washing type, r efer to the "Progr am tables". 0 1. Set the pr ogram selector to the requir ed washing progr am with the requir ed temperatur e.
Operating Instructions 20 Change Spin Speed / Select Rinse Hold 0 If necessary , change the spin speed for the final spin / select RINSE HOLD: Press the button Spin speed /RINSE HOLD as often as necessary until the indicator for the requir ed spin speed (or of RINSE HOLD) light s up.
Operating Instructions 21 Opening and Closing the Filling Door 0 Open: Pull on the handle of the filling door . 0 Close: Press the filling door firmly closed.
Operating Instructions 22 Add Washing Deter gent / Car e Agent 3 Refer to the information on washing detergents a nd care agents, see section ” Washing Detergents and Car e Agents ” . 0 1. Open the washing deterg ent drawer: grip inside the flap on the dr awer at the bottom (1) and pull out the dr awer as far as it will go (2).
Operating Instructions 23 Starting the washing pr ogram 0 1. Check that the water tap is open. 2. Start the washing progr am: Press the ST ART / PAUSE button The washing progr am is started or starts at the end of the time delay set .
Operating Instructions 24 Completion of the Washing Pr ogr am Progr am seque nce display Before the start, the pr ogram steps to be carried out are indicated by the Progr am se- quence display . The curr ent progr am step is displayed during the wash progr am.
Operating Instructions 25 The washing cycle is finished / Remove the washing After a washing progr am has ended, the indicator END lights up on the progr am sequence display . • If the progr am EASY IRON was chosen, an anti-cre asing phase of ap- prox.
Operating Instructions 26 Pr ogram T ables Wa s hi n g Not all possible settings ar e listed below - only the ones most com- monly used in everyday operation and the most appr opriate ones. Typ e o f Wa shi ng , Care Codes Max. Filling Quantity (dry weight ) 1) 1) A 1 0-litre bucket ho lds approx.
Operating Instructions 27 Separ ate Conditioning / Starching / Impr egnating Separ ate Rinse Separ ate Spin Typ e o f Wa shi ng Max. Filling Quantity (dry weight) Prog ram Selector Cottons / Linen 5k g STARCHING Typ e o f Wa shi ng Max. Filling Quantity (dry weight) Prog ram Selector Cottons / Linen 5k g GENTLE RINSE Easy-Car es 2.
Operating Instructions 28 Cleaning and Car e Contr ol panel Important! Do not use any fu rniture cleaning agents or aggressive cleaning agents in order to clean panel and contr ol parts. 0 Wipe control panels with a damp cloth. When doing so, use warm wa- ter .
Operating Instructions 29 7. Use a brush to clean the entire rinsing-in section of the washing machine, particularly also the noz- zles on the top side of the rinsing- in chamber . 8. Set the deter gent drawer into the guide tracks and push in. Wa s hi n g D r u m The washing drum is made of stainless steel.
Operating Instructions 30 Cleaning the dr ain pump P aper clips, nails and so on can sometimes get into the washing ma- chine with the washing and remain in the dr ain pump casing. Fluff and strands of fabric can gather on these items and block the drain pump.
Operating Instructions 31 What to do if... Remedying faults In the event of a fault, try to solve the pr oblem yourself with the aid of the information provided her e.
Operating Instructions 32 Water is not running. Error cod e (1 is shown in the multi-display . Wat er tap c lo se d. Open the water tap. Filter in scr ew connection of the intake hose blocked. Close the water tap. Unscr ew the hose from the tap, re- move the sieve and clean un- der running water Water tap is b locked with limescale or is faulty .
Operating Instructions 33 Water runs out under the washing machine. The scr ew connection on the intake hose is leaky . Tighten the intake hose screw connection. The drainage hose is leaky . Check the dr ainage hose and replace it if necessary . The drain pump cover is not correctly closed.
Operating Instructions 34 The main door cannot be opened while the appliance is turned on. The filling door is locked be- cause of a high water level or a high temperature. The DOOR indicator ligh ts red. Wait until the DOOR indica - tor lights up gr een.
Operating Instructions 35 If the washing r esults are not satisfactory If the washing has turned grey and if limescale is deposited in the drum, then • Too little deter gent was used. • The wrong deter gent was used. • Special soiling was not pre-tr eated.
Operating Instructions 36 Carrying out emer gency drainage • If the washing machine no longer pumps off the washing solution, emergency dr ainage must be performed. • If the washing machine is in a room wher e there is a risk of fr ost, emergency dr ainage must be performed if there is a possibility of frost.
Operating Instructions 37 When the water is completely drained: 6. Push the plug secur ely into the emergency dr ainage hose and turn it clockwise to secure it.
Operating Instructions 38 Additional rinsing cycle (RINSE+) The washing machine is set for extremely economical water consump- tion. However , for per sons who suffer from aller gies, it can be helpful to rinse with more wat er .
Operating Instructions 39 Child Safety Featur e If the child safety featur e is set, the filling door can no longer be closed and no washing program can be started. Setting the child safety feature 0 Use a coin to turn the rotary knob on the inside of the filling door clockwise as far as it will go.
Installation and connection instructions 40 Installation and connection instructions Installation Safety Pr ecautions • Do not tilt the washing machine onto its fr ont or onto its right side (viewed from the fr ont). Electronic components can get wet.
Installation and connec tion instructions 41 Installation of the appliance 3 Washing machines with curved panels are not suitable for installing under units. T ransporting the appliance • Do not place the washing machine on its front or on its right side (viewed from the fr ont).
Installation and connection instructions 42 3 The special key E and the caps D (2 each) and G (1 each) are sup- plied with it. 3. Unscrew the two screws with the special spanner . 4. Un s c re w th e 4 s c rew s B w it h s p e- cial spanner E. 5. Remove the transport r ail C.
Installation and connec tion instructions 43 Pr epare the installation place • The installation surface must be clean and dry , fr ee of floor polish residues and other gr easy coatings so that the unit does not slip away . Do not use lubricants as a sliding aid.
Installation and connection instructions 44 Compensate for floor unevenness Floor unevenness can be compensated for and the height can be cor- re cted with the four adjustable screw feet. The height can be adjusted in the r ange +10 .. -5mm. To adjust the feet use the special spanner supplied for removing the transport br aces.
Installation and connec tion instructions 45 Electrical connection Details of the mains voltage, current type and requir ed fuses can be found on the rating plate.
Installation and connection instructions 46 W ater inflow A pressur e hose of 1.35m in length is supplied. If a longer inflow hose is requir ed, only a VDE-approved, complete set of hoses with fitted hose scr ew connections offe re d by our Customer Service is permissible.
Installation and connec tion instructions 47 W ater drain The drainage hose can either be connected to a siphon or hung in a wash basin or discharge basin or a bath tub . Only original hoses may be used for extensions (max. 3m laid on the floor and then up to 80cm high).
Installation and connection instructions 48 Delivery heads over 1m To pump off the washing / rinsing solution, every washing machine has a dr ain pump which carries liquids up to a height of 1m via the drain- age hose, calculated from the machine's standing surface.
Warranty conditions / Custo mer service centres 49 W arr anty conditions / Customer service centr es Weiter e Kundendienststellen im Ausland In diesen L ä ndern gelten die Garantiebeding ungen der ö rtlichen Partner . Diese k ö nnen dort eing esehen werden.
Warranty conditions / Customer se rvice centres 50 Bahrain /Arabian Gulf A.A. Zayani & Sons P .O . Box 9 32 Bahrain Te l . : 2610 60 Croatia Electrolux D.O .O. Suplova 7 1 0000 Zagreb Tel . : 1 61 19 512 Fax: 1 6 1 19513 New Zealan d Euro-Life New Zealand Ltd.
Warranty conditions / Custo mer service centres 51 Israel Electricity & Electr onic Services-Evi s LTD. 19 Hataasia st. Raanana, Industrial ar ea 43654 Tel: 9 72-9-7448 1 18 Fax: 972 -9-76036 18 e-mail:evis@evis.co.il Malaysia Arzbergh Engineering No.
52.
53.
Index 54 Index A Abort program . . . . . . . . . . . . . . . . . . . . . . . 24 Additional rinse . . . . . . . . . . . . . . . . . . . . . . 38 C Care agent . . . . . . . . . . . . . . . . 9 , 17 , 18 , 22 Child safety feature . . . . . . . . . . . . .
Service 55 Service In the chapter "What to do if... “ , some faults are listed which you can re medy yourself. Look ther e first if a fault occur s. If you do not find any information ther e, please consult your Customer Service. (You c an find the addresses and telephone numbers in the section "Customer Service Centres “ .
AEG Hausger ä te GmbH P ostfach 1 036 D-90327 N ü rnberg http://www .aeg.hausger aete.de © Copyright by AEG 822 942 926-0 1-1 1 090 1-0 1 Subject to change without notice.
Ein wichtiger Punkt beim Kauf des Geräts AEG 70630 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AEG 70630 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AEG 70630 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AEG 70630 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AEG 70630 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AEG 70630 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AEG 70630 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AEG 70630. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AEG 70630 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
