Benutzeranleitung / Produktwartung 3295B002 des Produzenten Canon
Zur Seite of 36
Make sure to read this manual before using the printer . Please keep it in hand for future reference. Getting Started Read Me First series Photo Printer.
Contents 6 After Installing the Printer Install the Software 5 Install the Ink T anks 4 Install the Print Head 3 T urn the Power On 2 Loading Paper Preparation 1.
1 Symbols ■ The following symbols are used to mark important instructions. Observe these instructions. Additional explanations. Instructions that, if ignored, could result in personal injury or material damage. Instructions that must be observed for safe operation.
2 1 Preparation Check the Included Items ■ Manuals • ink tanks Print Head Before turning on the printer , remove all the orange tapes and the protective sheets. Setup CD-ROM (containing the drivers, applications and on-screen manuals) • W arranty • power cord A USB cable is necessary to connect the printer with your computer .
3 6 1 2345 Place the printer on a flat surface. • Do not place any object in front of the printer . • Y ou can print on large size paper such as 14" x 17"/355.6 x 431.8 mm or thick paper by loading the paper in the Front T ray . In that case, keep a space of 15.
4 6 1 2 345 2 2 1 3 1 2 A B T urn the Power On Conrm that the POWER lamp (B) lights green. T urn on the printer (A). Plug the power cord into the back left of the printer , then connect the other end to the wall outlet. Do NOT connect the USB cable at this stage.
5 6 1 2 3 4 5 3 1 A B C D 2 Install the Print Head Handle the Print Head carefully . Do not drop or apply excessive pressure to it. • Open the T op Cover (C). The Print Head Holder (D) comes out. (This is where you install the Print Head.) The Print Head Holder makes a noise as it moves.
6 3 4 5 3 E Firmly raise the Print Head Lock Lever (E) until it stops. There may be some transparent or light blue ink on the inside of the bag the Print Head comes in, or the inside of the protective cap - this has no effect on print quality . Be careful not to get ink on yourself when handling these items.
7 6 1 2 3 4 5 7 6 E Lower the Print Head Lock Lever (E) completely . Set the Print Head in place. Pinch the Print Head Lock Lever rmly and lower it gently . • Do not knock the Print Head against the sides of the holder . • Once you have installed the Print Head, do not remove it unnecessarily .
8 4 2 1 1 2 A Install the Ink T anks Handle the ink tanks carefully . Do not drop or apply excessive pressure to them. • Pull the orange tape (1) in the direction of the arrow to peel off the protective lm and remove the lm (2) completely . Do not hold the sides of the ink tank; ink may splash.
9 6 123 4 5 3 4 Install the ink tank Insert the ink tank. Press the PUSH mark on the ink tank until it clicks into place. Make sure the Ink lamp lights red.
10 6 123 4 5 4 D B C E 5 6 Close the T op Cover (B). W ait for about 3 minutes until the POWER lamp (green) (C) stops flashing and stays lit then operating noise stops, and go to the next step. Do not open the T op Cover while the lamp is flashing. • Make sure the Inner Cover (D) is closed.
11 6 1234 5 5 Install the Software Quit all running applications before installation. • T o use the printer by connecting it to a computer , software including the drivers needs to be copied (installed) to the computer's hard disk.
12 5 2 1 A B Windows Macintosh If the Found New Hardware or Found New Hardware Wizard dialog box appears: Remove the USB cable connected to your computer . TURN OFF THE PRINTER (A). T urn on the computer , then insert the Setup CD- ROM into the CD-ROM drive.
13 6 1234 5 3 4 Windows Macintosh AutoPlay screen appears, click Run Msetup4.exe . User Account Control dialog box appears, click Continue . If the same dialog box reappears in subsequent steps, click Continue .
14 5 6 5 Windows Macintosh Click Install . Move the cursor over items to display explanations. • Click Easy Install . Drivers, application software, and on-screen manuals are installed automatically . If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.
15 6 1234 5 7 8 Windows Macintosh Read the License Agreement screen carefully and click Y es . During installation, follow any on-screen instructions to install the software. • When the Please Allow All Install Wizard Processes screen appears, click Next .
16 5 9 10 A Windows Macintosh When the Printer Connection screen appears, connect the printer to the computer with a USB cable. If installation does not continue after 10 minutes, click Help on the screen in step , then conrm the message. • When the printer is recognized by the computer , a message appears on the screen.
17 6 1234 5 11 12 C D Windows Macintosh When the Print Head Alignment screen appears, load two sheets of A4 or Letter-sized plain paper in the Rear T ray (C) as shown. Align the Print Head For details, refer to "6 Loading Paper" on page 28. • Click Execute .
18 5 14 13 F E G Windows Macintosh When the Start Print Head Alignment dialog box appears, click Align Print Head . Click OK in the subsequent message. Printing of the pattern starts. If you align the Print Head automatically again, patterns different from those shown above may be printed.
19 6 1234 5 16 15 Windows Macintosh T o register later, click Cancel . User registration can be started from the Canon Solution Menu icon. For details, refer to "Solution Menu" on page 31. • Click Next . If connected to the Internet, the user registration page appears.
20 5 17 18 Windows Macintosh Click Exit . If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart . When the Extended Survey Program screen appears, conrm the message. If you can agree, click Agree .
21 6 1234 5 3 2 1 5 Windows Macintosh Connect the printer to the computer with a USB cable. Make sure the printer is turned on. Double-click the Setup icon. T urn on the computer , then insert the Setup CD-ROM into the CD- ROM drive. If the CD-ROM folder does not open automatically , double-click the CANON_IJ icon on the desktop.
22 5 6 4 5 Windows Macintosh Click Easy Install . Drivers, application software, and on-screen manuals are installed automatically . Click Install . If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation.
23 6 1234 5 8 7 9 Windows Macintosh Click Restart . When the Start Setup screen appears, click Execute . Read the License Agreement screen carefully and click Y es . Installation starts. During installation, follow any on-screen instructions to install the software.
24 5 10 11 A B Windows Macintosh Align the Print Head Click Execute . When the Print Head Alignment screen appears, load two sheets of A4 or Letter-sized plain paper in the Rear T ray (A) as shown. For details, refer to "6 Loading Paper" on page 28.
25 6 1234 5 13 12 D C E Windows Macintosh When this screen appears, click OK . Printing of the pattern starts. W ait until the pattern printing ends (about 5 minutes), and go to the next step. • If you align the Print Head automatically again, patterns different from those shown above may be printed.
26 5 15 14 Windows Macintosh Click Next . If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your printer . Y ou will need your product serial number , which is located on the inside of the printer .
27 6 1234 5 17 16 Windows Macintosh Click Exit . Remove the Setup CD-ROM and keep it in a safe place. When the Extended Survey Program screen appears, conrm the message. If you can agree, click Agree . If you click Do not agree , the Extended Survey Program will not be installed.
28 6 1 C B A 2 3 E D Loading Paper Open the Paper Support (C). This section explains how to load paper in the Rear T ray (A). Pull out the Front T ray Extension (B) beforehand. • Open the Feed Slot Cover (D), then pinch and slide the Paper Guide (E).
29 12345 6 4 D E F Print er inst allatio n is no w compl ete! Pinch and slide the Paper Guide (E) against the left edge of the paper , then close the Feed Slot Cover (D). Y ou can print on large size paper such as 14" x 17"/355.6 x 431.8 mm or thick paper by loading the paper in the Front T ray .
30 Getting Started Basic Guide Advanced Guide Manuals ■ D e s c r i b e s h o w t o s e t u p a n d u s e yo u r p r i n te r. I nt r o d u c e s t h e p r i n te r an d i t s f u n c t i o ns , t he i nc l u d e d ma n ua l s a n d a pp l i c a ti o n s o f t w a re .
31 Solution Menu is a gateway to functions and information that allow you to make full use of the printer! Open various applications and on-screen manuals with a single click. If you have a problem with printer settings, click the Change settings or nd solutions to problems.
32 Utilizing the Printer ■ Easy-PhotoPrint Pro is one of the application software. Easy-PhotoPrint Pro allows you to print high quality photos easily by utilizing the digital photo colors. Since ICC profiles are also available, you can print photos in colors that are closer to your ideal colors using color management.
33 Specifications Minimum System Requirements Conform to the operating system’s requirements when higher than those given here. Operating System Processor RAM Windows 7 1 GHz or faster 32-bit (x86) .
QT5-2188-V01 XXXXXXXX ©CANON INC.2009 PRINTED IN JAP AN Email T ech Support — www .canontechsupport.com Getting Help from Canon This option provides live telephone technical support, free of service charges, Monday-Friday (excluding holidays), during the warranty period.
Ein wichtiger Punkt beim Kauf des Geräts Canon 3295B002 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Canon 3295B002 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Canon 3295B002 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Canon 3295B002 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Canon 3295B002 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Canon 3295B002 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Canon 3295B002 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Canon 3295B002. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Canon 3295B002 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
