Benutzeranleitung / Produktwartung 500 des Produzenten Bulldog Security
Zur Seite of 27
. ..
. . WARRANTY Bulldog Warranty Information All Bulldog models have a Limited Lifetime W arranty on the main control module. All parts excluding the control module have a two y ear warranty against defects in workmanship, This includes shock sensors, remote tr ansmitters and sirens.
. . 3 TABLE OF CONTENTS Important Notice ................................................................... 4 A. REMOTE TRANSMIT TER OPERA TION .....................................5 B. TWO-W AY TRANSEIVER REMO TE CONTROL OPERATION .........6 C. LED DISPLAY CHART .
. . 4 WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of . 1. Keep all transmitters out of the reach of children 2. Do not lea ve anyone in the vehicle while running in remote control mode.
. . 5 A. REMOTE TRANSMITTER OPERATION: Transmitter Button System Function or Feature Remark Lock Doors & Arm the Security System Car Locator Works when armed only (3 sec.) Panic function Press and hold for 3 sec. + Silent Arming / Disarming Ign. in the "Off" position.
. . 6 OPERATION B. TWO-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION: Transceiver Button System Function Remark SET - SET - (C) System s Status Check Press within 3 sec. SET - ( ) Monitor Indoor T emperature Press within 3 sec. SET - ( ) Daily Timer Start Press within 3 sec.
. . 7 OPERATION G. ACTIVE ARMING LOCK & ARM: 1. Press the button on the transmitter . 2. The siren will chirp once and parking lights will flash once and remain ON for 10 seconds indicating that the system is now armed. The vehicles doors will lock upon arming when interfaced with the security systems keyless entry .
. . 8 OPERATION H. SILENT ARMING / DISARMING: Pressing the transmitters and buttons at the same time will arm or disarm your security system, No chirping sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. I.
. . 9 OPERATION K. ACTIVE DISARMING UNLOCK & DISARM: 1. Press the button on the tr ansmitter . 2. The siren will chirp (2) times and parking lights will flash (2) times and then remain ON for 30 seconds indicating that the security system is now disarmed.
. . 10 OPERATION Enter Valet Mode: 1 . With the unit Disarmed, turn the ignition to ON position. 2. Press and hold valet/program switch for 2 seconds until the LED turns ON . The LED wills remain on as long as the system is in Valet Mode .
. . 11 OPERATION O. PANIC MODE: The transmitter can be used as a remote panic switch to manually trigger the alarm in case emergency . 1. Press and hold the button for 3 second. The alarm will immediately sound. 2. During Panic Mode , the normal function of this trans- mitter button will be suspended.
. . 12 OPERATION S. TRUNK RELEASE (CHANNEL 3) OUTPUT. Press and hold the button on the transmitter for two sec- onds to remote control the trunk release or other connected electronic devices. T. CHANNEL 4 TIMER CONTROL OUTPUT Press the transmitters (4) and (4) buttons at the same time to activ e the Channel 4 function .
. . 13 OPERATION For 2-way LCD Remote Control Transceiver: 2nd Car Operation: 1 . Press the SET button first, within 3 seconds press and hold the and buttons together for 2 seconds with two beeping sounds and the icon will display on the LCD screen to indicate the second transceiver pin code has been learned.
. . 14 OPERATION A. TO REMOTE START THE VEHICLE: When you want to R emote Start your vehicle, 1 . Press the button twice on the transmitter 2 . The parking light will flash to indicate the remote starter received the signal.
. . 15 OPERATION B. ENGINE START MEMORIZING FOR VEHICLES WITH MANUAL TRANSMISSIONS The system senses the neutral tr ansmission position automatically and there is no prior set -up required. The system in the standard transmission vehicle operates a process that when you exit the v ehicle it senses and memorizes the neutral transmission position.
. . 16 OPERATION D. PIT-STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition switch. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the engine running and the climate control on .
. . 17 OPERATION 2 to 3 hour Timer Start with Temperature-Control OFF: This feature is design for an extreme cold climate usage. The system will automatically start the vehicle every 2 or 3 hours, to prevent the engine from freezing and to prevent a vehicle from being hard to start.
. . 18 REMOTE START OPERATION Exit the timer start: 1 . Timer start can be exited manually as follows: Make sure the engine is not running in remote start mode. 2 . T urn the ignition key ON . The LED and parking lights will flash (4) times. The horn chirps (4) times.
. . 19 REMOTE START OPERATION I. SHUT-DOWN INPUT FOR REMOTE STARTER: If any of the following conditions exists while the system is operating, the engine will not start or will shut down immediately: 1. The hood is opened. 2. The brake pedal is pressed.
. . 20 REMOTE START OPERATION K. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote T ransceiver . When the power of the battery weakens a icon will be displayed on the LCD screen.
. . 21 REMOTE START OPERATION Time Monitor Alert Alarm Y ou have set the morning call alarm. Count Down (Parking) Timer Power Save Mode Reminder when your time is Saves the battery power . up for parking. Vibration Mode Button Lock Remote control vibr ate when Disable the transmission the system is triggered.
. . 22 REMOTE START OPERATION Transmitter Description Operation Button SET - (2-sec.) Progr am Count Down Timer ( ) Press within 3 seconds (10-Minute/20M/30 M/1Hour/ *let the buttons start 1.5H/2.0H) counting down then flashes SET - (2-sec.) Enable/Disable Beep Sound ( Bi ) While Pressing Button 1.
. . 23 LCD REMOTE CONTROL TRANSCEIVER 7. Enable / Disable Beep Sound While Pressing Button: It has a short bi sound while pressing the button of the LCD screen transceiver .
. . 24 LCD REMOTE CONTROL TRANSCEIVER Transceiver Press Button Description Transceiver Button 2 Press the SET button once. Alert Alarm for and or + Time Setting (Hour) *Flash digit for adjusting P.
. . 25 LCD REMOTE CONTROL TRANSCEIVER EXIT : Press and hold the SET button for 2 seconds or leav e it for 10 seconds, the system will exit the programming mode. 1. Timer Setting: Example to AM10:30 1. Press and hold the SET button for 3 seconds, with two-melody sound and the Hours digit flashes for adjusting.
. . 26 LCD REMOTE CONTROL TRANSCEIVER 3. Count Down Timer Setting: Example Set count down timer at 2:30 1. Press and hold the SET button for 3 seconds, with two-melody sound and the Hours digit flashes for adjusting. 2. Press the SET button 5 times, the LCD screen will shows icon and Hours digit is flashes for adjusting.
. ..
Ein wichtiger Punkt beim Kauf des Geräts Bulldog Security 500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bulldog Security 500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bulldog Security 500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bulldog Security 500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bulldog Security 500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bulldog Security 500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bulldog Security 500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bulldog Security 500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bulldog Security 500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
