Benutzeranleitung / Produktwartung F1-ACE des Produzenten Bodum
Zur Seite of 43
F1-ACE Digital Set - T op Box for Free-T o-Air Remote Control Unit Specification Support & Copyright Safety STB Connections Reference Guide of Functions Guide of Main Menu Motorised System T roubl.
Time key Displays the current time on the right side of the screen and is also used as the WHITE key in the menus and reservation. 1 1.Remote Control Unit (RCU) Information key Displays the programme information box on the screen and is also used as the RED key in the menus.
P+ Selects the service list and used to select the item in the menu mode. OK Returns to the previous menu and screen. EXIT 2 Standby key Switches between Operation and Standby mode. This key is not available for F1-ACE. Numeric key Used to select the service and enter the channel information and PIN Code.
3 2. STB’S Specification Tuner & Channel Input Connector : F-type, IEC 169-24, Female Frequency Range : 950 MHz to 2150 MHz Input Impedance : 75 Ω unbalanced Signal Level : -25 to -65dBm IF Frequency : 480 MHz IF Band width : 36 MHz LNB Power & Polarisation : Vertical : +13.
4 A/V & Data In/Out VIDEO : RCA/Cinch Video Output(CVBS) AUDIO R/L : Cinch volume and Mute Control (Resolution : 20bit DAC, max 2 Vrms) RS232C : Transfer rate 115,200 bps 9 pin D-sub Type RF-Modul.
5 First and foremost, our knowledge of the set-top box marketplace along with technical expertise differentiates HUMAX. Moreover, we maintain very close working relationships with our customers. We take a highly disciplined engineering approach to product design, manufacture, testing, acceptance, and to technical and maintenance support.
This STB has been manufactured to satisfy the international safety standards. Please read the following recommended safety precautions carefully . MAINS SUPPLY : 190 ~ 250V AC 50/60Hz. OVERLOADING : Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock.
7 There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of the STB and the other end to a RCA/Cinch socket on your TV.
8 With Hi Fi System Connect an RCA/Cinch stereo cable from the AUDIO L, R sockets on the back of the STB to the LINE, AUX, SPARE OR EXTRA input sockets on your Hi Fi System.
9 STB Connection TV with Terrestrial antenna Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of the STB and the other end to a RCA/Cinch socket on your TV. If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on the back of the STB and the other end to a RF input socket on your TV.
10 TV with Motorised System (DiSEqC 1.2) Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the back of the STB and the other end to a RCA/Cinch socket on your TV. If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on the back of the STB and the other end to a RF input socket on your TV.
DiSEqC 1.0 Connection All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB at the same time.
Guide of Functions 12 LED of STB The message of the LEDs(Lighting-Emitting Diode) on the STB is explained as below. Upgrade via Satellite and Personal Computer To maintain the STB up-to-date, it will be possible to upgrade the software of the STB via satellite and personal computer.
13 Information Box (I-Plate) I-Plate displays when the key is pressed or when the service is changed. It shows the service part and event part. When you move to another service, the I-Plate should be displayed automatically. The time the I-Plate is displayed on screen is controlled in the Other Setting menu.
14 Service Change To change the service, enter the number by using the 0 ~ 9 keys. It is also possible to change the service by using the P+/ P- keys, / keys, Recall, Service list or EPG mode. To switch between the video and audio service, press the key.
move the cursor previous or next page exit from the Service Configuration select the favourite type or save the changes 15 Subtitle The display of the subtitle are tramitted from the EBU teletext specification and DVB Bitmap. Press the key to bring up the subtitle language list for the current service.
move the cursor previous or next page change Simple to Advanced list go to the selected service service list by Favourite go to the Service Configuration menu exit from the menu screen move the cursor.
17 Main Menu The contents of main menu are as follows: 1. TV GUIDE It shows the programme information and the timer programming process of the service.
move cursor for service selection previous or next page change between Now or Next programme move the highlight bar & display the service show Weekly programme list show the Reserved programme list Simple TV Guide reserve the programme display the selected service exit from the menu screen 1.
move the cursor select the level for blocking services enter the digits for PIN code exit from the menu screen return to the main menu move the cursor go to the selected menu return to the main menu exit from the menu screen 19 TV GUIDE-Quick mode. This mode shows in the A/V playback mode.
move the cursor select the language you want to set on the language list return to the previous menu exit from the menu screen select the language you want to set confirm the language and returns to t.
move the cursor select your preferences adjust the wake-up or sleep time and selects the wake-up service number exit from the menu screen return to the main menu 21 B. Time Setting Current time To set the current time, input the offset value by using the standardized information of current service area.
22 D. UHF Tuning Channel Sets the channel to display the audio and video signal on your TV. If you select channel 36 at this menu, the satellite service will be displayed at channel 36 on your TV. PAL Standard Sets the type of PAL of your TV. This STB supports PAL I/B/G/D/K among PAL Standards.
23 Move 1. You can move the service to wanted position using the (green) key. 2. The icon( ) will be marked in front of the service number. 3. Select new position with the / / / keys. 4. Press the OK key. 5. If you want to return to the original position, press the EXIT key.
24 Organise Favourite TV Services This mode serves to add and delete services to and from the favourite group. To add services into Favourites, locate the cursor to the desired service and press the OK key. The function of the colour keys is the same as Organise All Services, except for the following differences.
move the cursor go to the selected menu return to the previous menu exit from the menu screen move the cursor select LNB frequency or parameters. In Satellite Name, selects the name on the satellite list. return to the previous menu exit from the menu screen input the LNB frequency directly go to the manual search menu 25 C.
selects the satellite name you want to find confirm the satellite name and returns to the antnna setting menu. If you press OK key at ‘User Defined’, then the character table will displayed and you can input the name on the keyboard.
27 Motorized System It is used to set the DiSEqC 1.2 motor by Eutelsat specifica- tion. If you wish to use this system, please refer to page 34 for instructions. Service Search OSD If you press the EXIT key during the search, service search stops and the searching menu appears.
28 B. Manual Search After setting the search parameters like frequency, symbol rate etc., you can find the services manually in the transponder you have selected. Antenna Alternative Select the target antenna for manual search. This antenna alternative number is already set in Antenna Setting menu.
29 Polarisation Select the polarisation of the transponder you want to find. (Horizontal/ Vertical/ Auto.) In horizontal case, 18V and in vertical case, 13V are output through LNB line. Symbol Rate Inputs the symbol rate of the transponder you want to find.
move the cursor select the searching parameters input the frequency, symbol rate or PID value directly exit from the menu screen start the advanced search return to the previous menu 30 Advanced... Performs a manual search with the ability to enter PID(Video/Audio/PCR) values.
move the cursor select the searching parameters and type exit from the menu screen start the Automatic search return to the previous menu input the symbol rate directly 31 C. Automatic Search When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency.
32 Automatic Skip Option to search only Free-To-Air services. The above picture tries to search with varying frequency, symbol rate and FEC etc. Note: But, the user should select the satellite name in Antenna Setting menu and when the user inputs the satellite name separately, you should select the Detail mode.
33 C. STB Upgrade You can download and upgrade the software of this STB through ASTRA satellite when the software of new version is released. During downloading don’t turn off the STB. In case of power off turn on the STB and the downloading process will be continued.
DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can take advantage of the DiSEqC 1.2 functions available. The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the satellites and to search for the channels(STAB Rotor Sat motor recommended).
Motorised System 35 3. Initial Satellite Position Search This is required when you first set your receiver up to use DiSEqC 1.2, and sets the positions of all preprogrammed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated.
10. Use the Signal and Strength Quality bar at the bottom of the screen to judge the best position of the dish. 11. Use the / keys to stop the motor when required. 12. When you have the best position of the dish go to the Motor Control option and using the / keys select Store and press the OK key.
Motorised System 37 7. Automatic Search It is possible to use automatic search for Astra and/or Hotbird using the DiSEqC 1.2 motorised system. 1. Ensure that the positions for Astra and/or Hotbird are correct. (see Section 3 and 4 above) 2. In the Main Menu, select the option channel searching and press the OK key.
T rouble Shooting Guide About STB Problem Solution Does not display any message on the front panel or STB has no power. Check the main power cable and check that it is plugged into a suitable power outlet. Check whether STB is in Standby mode. No Picture Ensure that the STB is switched on (see above).
T rouble Shooting Guide 39 Service Search Problem Solution "No Signal" in manual search Check the "Signal Strength" and the "Signal Quality" in the Signal Status menu. Check the LNB - replace LNB if necessary. Check the cable from the LNB.
40.
.
HRACE.200.
Ein wichtiger Punkt beim Kauf des Geräts Bodum F1-ACE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bodum F1-ACE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bodum F1-ACE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bodum F1-ACE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bodum F1-ACE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bodum F1-ACE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bodum F1-ACE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bodum F1-ACE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bodum F1-ACE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
