Benutzeranleitung / Produktwartung Nauticast 2607 des Produzenten ACR Electronics
Zur Seite of 100
.
User Manual 2 Y1 - 03 -0203 Re v.L Please read this first! Warning: Although ACR strives for accuracy in all its publications; thi s material may contain errors o r omissions, and is sub ject to chan ge without prior notice. ACR shall not be made liab le for any specific, indirect, incidental or con sequential dam ages as a resul t of its use.
User Manual 3 Y1 - 03 -0203 Re v.L 1 S TARTING THE NAUTICAST ............................................................................................... 5 1.1 Initial Set Up of the NAUTICAST for operation ..........................................
User Manual 4 Y1 - 03 -0203 Re v.L History of Change s Date Version Rev. Status Comments Responsible 2002 - 12 - 04 1.0 A Released Latest release amend ments A. Lesch 2003 - 03 - 18 1.0 B Released Updated EC-Con formity Document inser ted. C. Moore 2003 - 03 - 27 1.
User Manual 5 Y1 - 03 -0203 Re v.L 1 Starting the NA UT ICAST 1.1 Initial Set U p of the NAUTICAST for operation ATTENTION: IM O REGULATIONS M ANDATE T HAT YOU ENTER T HIS INFORM ATION. After installing the antennas and hardw are the foll owing User, Voyage related and Ship Settings data needs to be en tered.
User Manual 6 Y1 - 03 -0203 Re v.L 1.2 Entering the MMSI and IMO Numbers Select from the M ain Menu “Service Conf iguration” Numbe r 6 . Menu is SER VICE password protected (Please see Appendi x 7.
User Manual 7 Y1 - 03 -0203 Re v.L 1.3 Entering Ship Settings (Please see Appendix 7.
User Manual 8 Y1 - 03 -0203 Re v.L GPS A NTENNA location on ship (is x in above M enu example) is loca ted 200 meters from bow (A) and 33 Meters from Starboard side (D). Note: W hen only using internal GPS antenna it is ok to have de fault values for ex ternal position since they are not used.
User Manual 9 Y1 - 03 -0203 Re v.L Scroll to the Voya g e Setting Fields w ith up and do wn arrows and in put your vessel data . Select a default C argo Type, Drau ght, POB (Pers ons on board), Destinati on, ETA and Nav igation Status Setting usin g the [Le ft] & [Right] arrow keys.
User Manual 10 Y1 - 03 -0 203 Rev.L Changing the Serv ice Pass word .
User Manual 11 Y1 - 03 -0 203 Rev.L Service Pass word Menu Example : Enter the new Password: Then push Enter (M 5). Repeat the new Password: Then Push Enter (M 5). A minimum of 6, a maxi mum of 8 characters are allowed . Should the new password include numbers, use the shi ft key to generate them.
User Manual 12 Y1 - 03 -0 203 Rev.L Enter the new Password. A minimum of 6, a maximum of 8 characters are allowed . Should the new password incl ude numbers, use the shift key to generate them. Repeat the new Password. Press Save to s tore the changes .
User Manual 13 Y1 - 03 -0 203 Rev.L 2 NAUTICA ST User Interface Soft Keys [M1] – [M8] Display Safety Keys Cursor Cross Enter Key Keyboard Navigation Screen Header (max.
User Manual 14 Y1 - 03 -0 203 Rev.L 2.1 NAUTICAST Keyboard The NAUTICAS T is fitted wi th a full alphanumeric keyboard, wi th the following functions : By pressing any key on the keybo ard the letters a re addressed.
User Manual 15 Y1 - 03 -0 203 Rev.L 2.4 Explanation of the Soft Key s The Soft Keys are divided into vertical static keys [M1-M4] and horizontal d ynamic keys [M 5-M8], which differ in function according to the curren t application.
User Manual 16 Y1 - 03 -0 203 Rev.L 3 NAUTICA ST Screens The advanced versi on of the NAUTICAST offers three displa y modes: Navigation Screen - Standard screen, autom atically visible Menu Structu re.
User Manual 17 Y1 - 03 -0 203 Rev.L 3.1.1 Own Vessel Data LAT:N 1°27.845'ExtSOG:34.6kn 05/26/06 LON:E 0°21.289'ExtCOG:173.0° 10:52:26 LAT: Latitude LON: Longitude Date: The actual UTC - date (MM .DD.YY) and time (hh.m m.ss) are display ed on the top right hand corner o f this vi ew.
User Manual 18 Y1 - 03 -0 203 Rev.L 3.1.2 Other Vessel Data 001/021..S HIP N AM E ....RNG.BRG..SO G..COG.. 001/021 (E.g: Vessel 01 o f 021) current o r selected Vessel / Total number o f Vessels (max .
User Manual 19 Y1 - 03 -0 203 Rev.L 3.1.4 Other Vessel Deta ils This screen show s the Dynami c, Voyage and Ves sel Related Data, w hich is currently being transmitted by a p reviously selected vessel .
User Manual 20 Y1 - 03 -0 203 Rev.L Reference Point (in meters): This information indi cates the Re ference Point of the used GPS Antenna onboard the vessel. RefPoint:A190 B120 C10 D<63m A: 190m B: 120m C: 10m D: <63m (means mo re than 63m i n the case of a very large vessel) Vessels Cargo: Indicates the t ype of cargo on board.
User Manual 21 Y1 - 03 -0 203 Rev.L 3.2 Menu Structure To call up the M ain Menu, press the [Menu] button once, and all Submenu s are display ed. The cursor position indicate s the selec ted submenu. Menu navi gation is achieved by pressing the [Up] or [Down] keys to select, and then by pressing [Enter] to con firm the desi red Submenu selection .
User Manual 22 Y1 - 03 -0 203 Rev.L 3.4 Sub-Menus Overview 3.4.1 Messages 3.4.2 A IS Status 3.4.3 Voyage Settings – (User Password Pro tected) N 1 o 19' E 0 o 12' |1>0.10|2>1.30|3>1.80nm | 1. Messages -----| | | + - 1. Write Addressed SRM View | + - 2.
User Manual 23 Y1 - 03 -0 203 Rev.L 3.4.4 Ship Settings – (Use r Password Protec ted) 3.4.5 Configuration – (User Password Protec ted) 3.4.6 Service Configura tion – (Service Pass w ord Protecte.
User Manual 24 Y1 - 03 -0 203 Rev.L Display Settings 3.4.7 Graphical Disp lay Settings 3.5 Sub-Menus Detailed 3.5.1 Messages N 1 o 21' E 0 o 15' |1>0.
User Manual 25 Y1 - 03 -0 203 Rev.L Dynamic Key s: Messages [M5] [Select] Select chosen Submenu [Enter] Confirm M essage Submenu Selection [M8] [Back] Return to Mai n Menu Screen [Up] / [Down] Navigate Submenu for Selection Writing Messages: This screen provi des a means to wri te and send mes sages.
User Manual 26 Y1 - 03 -0 203 Rev.L Dynamic Key s: Messages [M5] [Select] Write Messa ge to Selected Vessel [Enter] Write Messa ge to Selected Vessel [M8] [Back] Return to Message s Menu b) Using the NAU TICAST Messa ge Editor After selecting a v essel, the M essage Editor is aut omatically di splayed.
User Manual 27 Y1 - 03 -0 203 Rev.L c) Confirmation o f Sent Addressed M essage The confirmati on screen show s the successful me ssage transmissi on and indicates w hich channels (AIS1 or AIS2) were used.
User Manual 28 Y1 - 03 -0 203 Rev.L .
User Manual 29 Y1 - 03 -0 203 Rev.L e) Confirmation o f Broadcast Sent M essage This Confirmation Screen show s that the messa ge was successfully tran smitted on the Broadcast Setting. By pressin g [Back] the u ser automaticall y returns to the Message Edi tor for further Messaging.
User Manual 30 Y1 - 03 -0 203 Rev.L f) Long Range Interroga tion Mobile, and shore -based stations hav e the ability to interrogate vessel s and make re quests for informat .
User Manual 31 Y1 - 03 -0 203 Rev.L An LRI has arriv ed; The NAUTICAS T Settings are con figured to Automatic Mod e: Dynamic Key s: LRI in the Inbox History (automatic mode) [M5] [OK] Confirms that LR.
User Manual 32 Y1 - 03 -0 203 Rev.L Dynamic Key s: LRI in the Inbox History (manual mode) [M5] [OK] Accept LRI [M7] [Reply ] Send Addressed Message to LRI Sender [M6] [Reject] Reject LR [M8] [Back] Return to Messages M enu g) Inbox History The Inbox History provides a means to reading in coming messages and alarms.
User Manual 33 Y1 - 03 -0 203 Rev.L Inbox History: Overview of Received M essages and Alarms Message Type s: Description ASRM Addressed Safety Related M essage BSRM Broadcast Sa fety Related M essage ALR Alarms (Details see Al arm Types chapter 5.
User Manual 34 Y1 - 03 -0 203 Rev.L ASRM 13:43 PIRA TE ATTACK! 5264 Addressed Safety Related M essage, acknowledged by recipi ent, arrived at 13:43, with text .
User Manual 35 Y1 - 03 -0 203 Rev.L ASRM: Information Time 17:39 Date 11/26 (mm.dd) POS 01/02 (Messa ge 01 of 02) Message Type AddressedSRM Status * (not acknow ledged) MMSI of Sende r 5004 Channel Incoming AIS Chann el ACK Message not yet acknowledged A LR – Reading Incoming A l arms: ALR: Information Time 17:36 Date 11/26 (mm.
User Manual 36 Y1 - 03 -0 203 Rev.L 3.5.2 A IS Status The AIS Status M enu provides a variety of in formation concerning own vessel settings, as well as the current AIS s tatus of the o ther vessels, which are display ed in the Ves sel Listing. Version Info prov ides detail s of the actual softw are release cur rently installed .
User Manual 37 Y1 - 03 -0 203 Rev.L Mod.: A IS Transmission Mode AU Autonomous AS Assigned IN Interrogation/Pol led Mode ?? Unknown Used Channel AIS1, AIS2 Syn.
User Manual 38 Y1 - 03 -0 203 Rev.L Own Vessel Posi tion: LAT : N 1°18.901' LON : E 0°12.345' Heading and Ro tation of o wn vessel: Heading :77 o ROT : +5.
User Manual 39 Y1 - 03 -0 203 Rev.L c) Version Info This Screen show s the actual So ftware Release which is being run on the NAUTICAST. d) Security Log The Security Lo g is implemented to show the times o f the transponder.
User Manual 40 Y1 - 03 -0 203 Rev.L 3.5.3 Voyage Settings (User Pass word Protected) NOTE: The de fault passw ord from the factory is mentioned on your A IS display at the protection foil.
User Manual 41 Y1 - 03 -0 203 Rev.L Voyage Settings En tries After a new User Password has been set, Voyag e Settings may be input. A selection is made with the .
User Manual 42 Y1 - 03 -0 203 Rev.L Data Input Modes Voyage Setting Description Input Modus Cargo Cargo Category Default Setting <Selection > N/A or harmless DG, HS or M P (category A) DG, HS or.
User Manual 43 Y1 - 03 -0 203 Rev.L 3.5.4 Ship Settings (Use r Pass word Protected) After a new User Password has been set, the Shi p Settings may be input. The Ship Settings are usually only set once, upon NAUTICA ST initial operation. A selection is made with the cursor buttons [Up] or [D own] for input field selection.
User Manual 44 Y1 - 03 -0 203 Rev.L Input Modes fo r Ship Setting s Ships Setting Description Input Modus Call Sign Ships Call Si gn Manual input Ship Name Ships Name Manual input Length Length of shi.
User Manual 45 Y1 - 03 -0 203 Rev.L After the Ship Set tings hav e been input and saved , this screen appea rs . [Exit] takes the use r back to the Mai n Menu. GPS A ntenna Mounting It is important to inpu t the ex act mounting position of the GPS Antenna on the v essel as this influences the accu racy o f the displayed target in an ECDIS.
User Manual 46 Y1 - 03 -0 203 Rev.L Sample: Display: CallSi gn = D11233 ShipName = M /V TUGELA Length = 200m Beam = 30m RefPointExt = A170 B30 C15 D15m (location of th e external GPS antenna ) RefPoin.
User Manual 47 Y1 - 03 -0 203 Rev.L 3.5.5 Transpond er Configuration (User Password Pr otected) The Configurati on Menu all ows the user to alter th e hardware-based para meters. User Passw ord Configuration is also undertaken here . A ccessing the Configuration Settings: The Configurati on Menu is User Passw ord protect ed.
User Manual 48 Y1 - 03 -0 203 Rev.L Accessing the Con figuration M enu with the default User Passw ord Dynamic Key s: Input of Default Use r Pass word to Acces s Configuration [M5] [Enter] Confirm De .
User Manual 49 Y1 - 03 -0 203 Rev.L a) Change User Pas sword (for initial NAU TICAST Operation) It is strongly recommended to chan ge the de fault User Password upon initial NAUTICAST operatio n. A minimum of 6 , a maximum of 8 cha racters are allowed.
User Manual 50 Y1 - 03 -0 203 Rev.L This screen appears if the new User Passwords a re mismatched - i.e. the N ew User Passw ord and the Repeated New User Passw ord are not identical . In this case, it is po ssible to re-input bo th the New and Repe ated User Pas swords again.
User Manual 51 Y1 - 03 -0 203 Rev.L b) Region Settin gs A Region is a de fined area, w ith specific VHF parameters, w hich are sent out by Vessel Traffic Service Stations (VTS), and receiv ed via Digital Selective Ca lling (DSC) or AIS. The screen show s a list o f Regions, and their i nput sources.
User Manual 52 Y1 - 03 -0 203 Rev.L Creating a Ne w Region Parameters for se tting up a new Region can be entered and sav ed here. Dynamic Key s: Initial User Pass word Setting [M5] [Save] Confirm Region Data Input [M8] [Back] Return to Region Listing Inputting Region Se ttings : Mode of Latitude and Longitude Input: Example : 44 Degrees, 13.
User Manual 53 Y1 - 03 -0 203 Rev.L c) Alarm Settin gs This screen allow s t he user to enable or disable the generation and displa y of Alarms. Alarms are display ed in the Alarm Inbox (see Menu 5: Transponder Con figuration, Sub menu 3: Alar m Settings) and on the ECDIS screen.
User Manual 54 Y1 - 03 -0 203 Rev.L Dynamic Key s: LR Interrogation Settings [M5] [Save] Save LRI Settin gs [Up] / [Down] Select Data Fiel d for Configuration [M6] [Change] Enable or Disable selected .
User Manual 55 Y1 - 03 -0 203 Rev.L Dynamic Key s: Reply ing to a LR Interrogation [M5] [OK] Notifies User o f current interrogation [M8] [Back] Return to Vessel Listing [M7] [Reply ] Display Message Editor for LRI Reply Sensor Settings The screen provi des the means to sw itch t he sensor speed s.
User Manual 56 Y1 - 03 -0 203 Rev.L Use this menu to set up the data speed 4800/960 0/38400 baud. NOTE: This Con figuration should be do ne from adv anced user like install ation technicians only. Therefore you w ill find more detai ls in the installat ion manual.
User Manual 57 Y1 - 03 -0 203 Rev.L 3.5.6 Service Configura tion (Serv ice Password Protected ) The Service Con figuration M enu allows ini tial configuration of the Serv ice Password, Passw ord Settings (on/off), MMSI/IM O Numbers and the op tion of resetting the NAUTICAST to Factory Settings.
User Manual 58 Y1 - 03 -0 203 Rev.L a) Change Servi ce Password This screen provi des a means to indiv idually con figure the Serv ice Password. This password di ffers .
User Manual 59 Y1 - 03 -0 203 Rev.L b) User Password Set tings Change User Pass w ord Protection : This function all ows the user to enable or disable the User Passw ord Query Function. For security reasons, it is hi ghly recommended to enable Use r Password Pro tection in order to avoid unauthorized Transpond er operation.
User Manual 60 Y1 - 03 -0 203 Rev.L c) Changing the MM SI / IMO Nu mbers This screen provi des a means to chan ge the MM SI and IMO Number s; the input fields are limited to a maximum o f 9 characters.
User Manual 61 Y1 - 03 -0 203 Rev.L After pressing [OK ], the Data Sav ed Screen con firms the Resto re Factory Settin gs command. Note: The NA UTICA ST has been restored to the Factory Settings! Now please con figure y our: - Ship Settings - Voyage Settings - User Password - Service Pass word 3.
User Manual 62 Y1 - 03 -0 203 Rev.L Dynamic Key s: Display Settings [M5] [DayNight] Switch between Da y or Night Settings [Enter] Switch betwee n Day or Night Settings [M8] [Back] Return to Main Menu .
User Manual 63 Y1 - 03 -0 203 Rev.L Dynamic Key s: graphical user inter face [M1] filter option on AIS targets in graphica l view FA (hides receiv ed Class A targets) FB (hides receiv ed Class B targe.
User Manual 64 Y1 - 03 -0 203 Rev.L pressing [M2] leads to Rad ar View pressing [M2] leads to Fair w ay View pressing [M2] leads y ou back to Navigation S creen.
User Manual 65 Y1 - 03 -0 203 Rev.L 3.6.2 The Radar Vie w This screen provides the user with a commonly used way of representing ship objects on an electronic device. The Radar View is northern orientated, as indicated by the compass on the very right top of the screen .
User Manual 66 Y1 - 03 -0 203 Rev.L Dynamic Key s: Radar Vie w [M1] Set filter option on AIS Targets [M2] Switch betwee n the views [M3] Show alarm w indow [M5] Acknowledge alarms or sa fety related m.
User Manual 67 Y1 - 03 -0 203 Rev.L Scrolling Since the outer distanc e ring does not completel y fit into the (rectan gle) display , it is possible to scroll the view from North or South. T he maximum scrolling distance is limited to the r adius of the outer distance rin g in the current zoom level .
User Manual 68 Y1 - 03 -0 203 Rev.L The Minimized R adar Vie w The minimized radar view shows a split screen. On the left hand side a Ship List is displ ayed, on the right hand side a minimized v iew of the Radar Vi ew is visi ble. This view will be display ed, if one of the cursor keys is p ressed.
User Manual 69 Y1 - 03 -0 203 Rev.L Ship Details If a target is selected by pressing [Enter], whether in the Ship List or direc tly in the graphical view, the correspondin g ship details are displayed instead o f the minimized view. Pressing [Up] o r [Down] scrolls the ship detail list by line, [Left] or [Ri ght] by page.
User Manual 70 Y1 - 03 -0 203 Rev.L The Elements in the Fair way Vie w: Compass: Shows the current COG. Fairway Lines : The Fairway Lines are border lines of a virtual fairway oriented on the actua l course over ground .
User Manual 71 Y1 - 03 -0 203 Rev.L Zoom Level 2 would look like this: The Minimized Fa irway Vie w The minimized Fairway View shows a split screen. On the left hand side a Ship List is displayed and on the right hand side a minimiz ed Fairway View is seen.
User Manual 72 Y1 - 03 -0 203 Rev.L The Elements in the Minim ized Fairway View: “Message Wri te” Button: By pressing the [M4] button, a message could be sent to that AIS-Target that is currently selected in the Ship List. Ship List: This list shows the same targets as shown in the Nav ig ation Screen.
User Manual 73 Y1 - 03 -0 203 Rev.L 3.6.4 Message and A larm Handling A larms If an alarm occurs , the sy mbol to the right of the [M 3] button becomes visi ble. Pressing the [M 3] button show s the details of the sel ected alert. Pressing [ M5] leads to alarm acknowledgement and the closu re of the window as wel l as t he alar m icon disappearing.
User Manual 74 Y1 - 03 -0 203 Rev.L 3.6.5 Configuration of the Grap hical Display General The configuration of the Graphical Display could be accessed over the entry point 8 of the Main Menu. The Configurati on Menu all ows the user to alter th e parameters o f the Graph ical Display .
User Manual 75 Y1 - 03 -0 203 Rev.L Inside the Graphical Display Setting you can cho ose out of 4 diffe rent Sub-Menus. Sub-Men u Content Fairway Vi ew Scale Settings of the Geo metry and Scale o f th.
User Manual 76 Y1 - 03 -0 203 Rev.L Parameter descript ion: Parameter Description Angle(A) Value range: 2° to 178° Dim(B) The parameter Di m(B) de fines the width o f the fairw ay in percent of the horizon tal line.
User Manual 77 Y1 - 03 -0 203 Rev.L The f ollowi ng drawing illustrates t he parameters from the Fairway View S cale Menu and additionally presents the trans formation proces s from the Rad ar View to the Fairw ay View . 10 nm Horizontal line 260° 325.
User Manual 78 Y1 - 03 -0 203 Rev.L Fairway View Symbols Dynamic Key s: Fairway View Symb ols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu The symbols for the own ship and for other tar gets could be selected individually .
User Manual 79 Y1 - 03 -0 203 Rev.L Radar Vie w Symbols Dynamic Key s: Radar Vie w Symbols [M5] [Save] Save the settin gs [M8] [Back] Return to Graphical Display M enu Parameter Symbol Standard Standard + Vecto rs Standard Solid Standard Solid + Vec tors Solid Reduced (3x3) Note: Other symbols (i.
User Manual 80 Y1 - 03 -0 203 Rev.L Other Settings Inside this menu it is possible to adjust t he graphical vi ew to your demand. The available function s cover the topics: o AIS-target filte r settings o Enabling / disabli ng the Auto Zoo m feature wi th max.
User Manual 81 Y1 - 03 -0 203 Rev.L Save On all of the described options inside the Configuration of the Graphical User Interface you could save your settin gs by pressing the [M2] Button.
User Manual 82 Y1 - 03 -0 203 Rev.L 4.1 MOB Person over Board By pressing the M O B button the curren t navigation position o f own vessel and time of incident i s .
User Manual 83 Y1 - 03 -0 203 Rev.L The desired Dis tress Message Text can be sel ected by pressin g the appropria te number on the keyboard. By pressin g the [Exi t] button, it is possi ble to escape from this screen w ithout sending th e SRM Message.
User Manual 84 Y1 - 03 -0 203 Rev.L Dynamic Key s: Send SRM Message [M5] [Send] Send selected SRM Message [M8] [Back] Return to SRM Message Selection Confirmation o f sent SRM: Upon sending the SR M to all v essels the Broadca st Transmission Sta tus is show n.
User Manual 85 Y1 - 03 -0 203 Rev.L NOTE: The SRM message transmissi on is autom atically repeated ev ery 180 seconds until the [Stop] button has been pre ssed. Each SRM Message that is sen t out every 180 se conds contains upda ted navi gation information o f own v essel position and actual time.
User Manual 86 Y1 - 03 -0 203 Rev.L 5 Troublesho oting 5.1 Reading and understanding Alarms: The NAUTICAS T differentiates be tween Alarm a nd TXT messa ges. An Alarm informs the user about major system malfunctions and failings in the connected sensors .
User Manual 87 Y1 - 03 -0 203 Rev.L 5.2 Alarm Codes ID Description Text Cause/Source System Reaction / Remedy 01 AIS: Tx malfunction VHF Antenna, cabling Reaction: The tran sponder uni t stops transmission. If Alarm ID 01 and ID 02 are simultane ously display ed, then a major antenna proble m has arisen.
User Manual 88 Y1 - 03 -0 203 Rev.L 53 AIS: BATTERY SOON LOW Battery is soon out of capacity Reaction: Ow n ship data is lost a fter pow ering on/off the syste m.
User Manual 89 Y1 - 03 -0 203 Rev.L 6 Contact and Su pport Informat ion Contact your local dealer for NAU TICAST support. Please see our ACR W ebsi te for Servi ce Listing. ACR Electronics Europe GmbH Mariahilfer Straße 50/2/11 A-1070 Vienna, Austria Tel: +43 (1) 5 237 237 - 0 Fax: +43 (1) 5 237 237 - 150 Email: Technical.
User Manual 90 Y1 - 03 -0 203 Rev.L 7 Appen dix 7.1 Explanation of commonly used Abbreviations Abbreviation Full Text Abbreviation Full Text A/B (A+B) AIS Channel 1 / AIS Chan nel 2 IntGPS Internal Gl.
Bundesrepubli k Deutschland Federal Republic of Germany Bundesamt für Seeschifffahrt und Hydrographie Federal Maritime and Hydrographic Agency BUNDESAMT FUR SE ESCH I FFFAH RT UND HYDROC RAPH I E (No & item designation) i '' ","5": [No Ö( l.
EC TYPE EXAMINATION CERTIFICATE No. BSH/461214321220109 Page2o'f 2 Gomponents necessary for operation: Components necessary fof operation Part No. Remarks NAUTICASTTM AIS 2607 Software-Version: 2.0.S1 05 Connection Box 2640 GPS Antenna AIS-A W/SM Coax 2639 VH-3200 VHF Stainless Steel Whip Antenna 91.
.
.
Annex to EC QUALTTY SYSTEM (MODULE D) CERTTFTCATE No. BSH I 46131051021 1251 109 BUNDESAMT FüR SEESCHIFFFA}IRT UNI) HYDROGRAPII I E Item Module B Certificate data Registration number date of issue date of expiry Notified Body USCG Approval No. 4.111.
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konfor mitätserklärung bestätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 f ür m aritime Ausrüstung, geändert durch die EC Council Directive 2002/75/EC vom 2.
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besser dem im untenst ehenden Zertifikat ausgewiesenen Zubehör ist.
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besser dem im untenst ehenden Zertifikat ausgewiesenen Zubehör ist.
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konformitätserklärung bestätigt, dass das unten benannte Zubehör gleich oder besser dem im untenst ehenden Zertifikat ausgewiesenen Zubehör ist.
EG - Konformitätserklärung EC - Declaration of Conformity Diese Konfor mitätserklärung bestätigt, dass das unten benannte Produkt den Auflagen der EC Council Directive 96/98/EC vom 20 Dezember 1996 f ür m aritime Ausrüstung, geändert durch die EC Council Directive 2002/75/EC vom 2.
Ein wichtiger Punkt beim Kauf des Geräts ACR Electronics Nauticast 2607 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ACR Electronics Nauticast 2607 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ACR Electronics Nauticast 2607 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ACR Electronics Nauticast 2607 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ACR Electronics Nauticast 2607 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ACR Electronics Nauticast 2607 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ACR Electronics Nauticast 2607 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ACR Electronics Nauticast 2607. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ACR Electronics Nauticast 2607 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
