Benutzeranleitung / Produktwartung RX-V2300 des Produzenten Yamaha
Zur Seite of 91
OWNER’S MANUAL R X-V2300 U A V Receiver Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANAD A MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUR OP A G.
I CA UTION IMPORT ANT SAFETY INSTRUCTIONS CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE.
SAFETY INSTRUCTIONS IMPORT ANT SAFETY INSTRUCTIONS CA UTION II 1. IMPORT ANT NOTICE : DO NO T MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not e xpressly approv ed by Y amaha may void your authority , granted by the FCC, to use the product.
1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place for futur e reference. 2 Install this sound system in a well ventilated, cool, dry , c lean place — aw ay from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
English INTRODUCTION PREP ARA TION B ASIC OPERA TION ADDITIONAL INFORMA TION AD V ANCED OPERA TION 1 CONTENTS AD V ANCED OPERA TION REMO TE CONTROL FEA TURES ................... 43 Control Area .........................................................
2 Manufactured under license from Dolby Laboratories. “ Dolby ” , “ Pro Logic ” , and the double-D symbol are trademarks of Dolby Laboratories. “ DTS ” , “ DTS-ES Extended Surround ” and “ Neo: 6 ” are trademarks of Digital Theater System, Inc.
English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX 3 TRANSMIT RE-NAME STANDBY 6CH INPUT SOUND SYSTEM CLEAR LEARN MACRO OFF ON MACRO PHONO A B CD.
4 BASS VOLUME VIDEO AUX SILENT PROGRAM STEREO REC OUT /ZONE 2 SPEAKERS 6CH INPUT MODE BASS EXTENSION PROCESSOR DIRECT PRESET / TUNING PHONES EFFECT SOURCE /REMOTE MD/TAPE CD–R TUNER CD PHONO DVD D.
5 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONTROLS AND FUNCTIONS D I G I T A L N A T U R A L S O U N D A V R E C E I V E R R X - V 1 3 0 0 T o open, press g ently on the lower part of the panel.
6 CONTROLS AND FUNCTIONS TRANSMIT RE-NAME ST ANDBY 6CH INPUT SOUND SYSTEM CLEAR LEARN MACRO OFF ON MACRO PHONO A B CD DVD VCR2/DVR VCR 1 TITLE MENU CHAPTER P AUSE STOP POWER REC HALL 1 EX/ES DSP 10KEY.
7 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONTROLS AND FUNCTIONS BASS VOLUME VIDEO AUX SILENT PROGRAM STEREO REC OUT /ZONE 2 SPEAKERS.
8 CONTROLS AND FUNCTIONS RL LC R RC RR LFE VIRTUAL DTS Neo MOVIE TV THEATER ENTERT AINMENT 12 :6 DOLBY DIGIT AL PRO LOGIC VCR DVD TUNER CD PHONO CD R V AUX DSP EX MA TRIX DISCRETE ES PCM 1 SILENT SP DIGIT AL VCR2/DVR CBL / SA T MD / T APE TV / LD STEREO TUNED MEMORY dB ft m S P .
9 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONTROLS AND FUNCTIONS AC OUTLETS CENTER SUB WOOFER S VIDEO MONITOR OUT VIDEO DIGITAL OUTPUT DIGITAL INPUT 6CH INPUT GND AUDIO AUDIO VIDEO CONTROL OUT SPEAKERS TUNER REMOTE IN 75 Ω UNBAL.
10 SPEAKER SETUP Speakers to Be Used This unit has been designed to pro vide the best sound- field quality with a 6-speak er system, using left and right main speakers, left and right rear speakers, and a center and rear center speakers.
11 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SPEAKER SETUP 12 Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “ + ” (red) and “–” (black) properly .
12 SPEAKER SETUP AC OUTLETS CENTER SUB WOOFER S VIDEO MONITOR OUT VIDEO DIGITAL OUTPUT DIGITAL INPUT 6CH INPUT GND AUDIO AUDIO VIDEO CONTROL OUT SPEAKERS TUNER REMOTE IN 75 Ω UNBAL.
13 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SPEAKER SETUP AC OUTLETS ZONE 2 OUT IMPEDANCE SELECTOR SELECTEUR D'INPEDANCE SET BEFORE POWER ON L R – + + – MAIN A OR B: A+B: CENTER 4 Ω MIN.
14 y • The COMPONENT VIDEO jacks on this unit are independent of the S VIDEO and VIDEO jacks. • Connection depends on the av ailability of input jacks on your monitor . The signals input through the S VIDEO jacks can be con verted to composite signals inside of this unit and output through the VIDEO jacks on this unit as well.
15 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS CENTER SUB WOOFER S VIDEO MONITOR OUT VIDEO DIGIT AL OUTPUT DIGIT AL INPUT 6CH INPUT GND AUDIO AUDIO VIDEO TUNER 75 Ω UNBAL.
16 CONNECTIONS CENTER SUB WOOFER S VIDEO MONITOR OUT VIDEO DIGIT AL OUTPUT DIGIT AL INPUT 6CH INPUT GND AUDIO AUDIO VIDEO TUNER 75 Ω UNBAL. AM ANT GND FM ANT COMPONENT VIDEO S VIDEO DVD D-TV /LD CBL.
17 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS Connecting Audio Components ■ Connecting a CD play er y • The CO AXIAL CD and OPTICAL CD jacks are available for a CD player which has coaxial or optical digital output jacks.
18 CONNECTIONS CENTER SUB WOOFER DIGIT AL OUTPUT DIGIT AL INPUT 6CH INPUT GND AUDIO R L OPTICAL MD / T APE IN ( PLA Y ) IN ( PLA Y ) OUT ( REC ) OUT ( REC ) CD-R CD-R MD/T APE CD-R DVD CBL /SA T CD CD.
19 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS TUNER 75 Ω UNBAL. AM ANT GND FM ANT COMPONENT VIDEO P R / C R V D N ITOR U T BL AT W C C P B / C B Y ■ Connecting the AM loop antenna 1 Set up the AM loop antenna, then connect it.
20 CONNECTIONS MAIN OUTPUT SUB WOOFER CENTER CENTER REAR REAR R L R L (SURROUND) 1 2 3 4 5 Connecting to an External Amplifier If you want to increase the po wer output to the speakers, or want to use another amplif ier, connect an e xternal amplifier to the OUTPUT jac ks as follo ws.
21 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX CONNECTIONS AC OUTLETS E DANCE SELECTOR T BEFORE POWER ON A OR B: A+B: E R 4 Ω MIN. /SPEAKER 8 Ω MIN. /SPEAKER 6 Ω MIN. /SPEAKER 6 Ω MIN.
22 CONNECTIONS T urning on the Power When all connections are completed, turn on the po wer of this unit. 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the po wer of this unit. 2 T urn on the video monitor connected to this unit.
23 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX Selecting the OSD Mode 1 T urn on the video monitor connected to this unit. 2 Press ON SCREEN on the remote control repeatedly to c hange the display mode.
24 Item 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D REAR CT SP 1E LFE/BASS OUT 1F MAIN LEVEL 1G SP B SET Description Selects the output mode according to whether or not a center speaker is being used and its performance. Selects the output mode according to the performance of the main speakers.
25 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX This section explains ho w to adjust the speaker output le vels by using the test tone generator . When this adjustment is made, the output lev el heard at the listening position will be the same from each speaker .
26 ADJUSTING THE SPEAKER OUTPUT LEVELS Notes • If “ 1A CENTER SP ” on the SET MENU is set to NONE, the center channel sound is automatically output from the left and right main speakers. • If “ 1C REAR L/R SP ” on the SET MENU is set to NONE, the output lev el of the rear right, left and center speakers cannot be adjusted in step 4.
27 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX BASIC PLA YBACK 1 Press ST ANDBY/ON (SYSTEM PO WER on the remote control) to turn on the po wer . 2 T urn on the video monitor connected to this unit.
28 BASIC PLA YBA CK ■ BGV (backgr ound video) function The BGV function allo ws y ou to combine a video image from a video source with a sound from an audio source. For e xample, you can enjoy listening to classical music while having beautiful scenery fr om the video source on the video monitor .
29 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX BASIC PLA YBA CK Input Modes and Indications This unit comes with various input jacks. Y ou can set the priority of the input signal among different types of input signals.
30 BASIC PLA YBA CK Selecting a Sound Field Program Y ou can enhance your listening experience by selecting a DSP program. Ther e ar e 11 programs with sub-programs a vailable with this unit. Ho wever the selection depends on the input signal format and not all the sub-programs are possible for all input signal formats.
31 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX BASIC PLA YBA CK Selecting PRO LOGIC, PRO LOGIC or Neo: 6 Y ou can enjoy the 2-channel sources decoded into fi ve or six discrete channels by selecting PR O LOGIC, PRO LOGIC or Neo: 6 in the program No.
32 BASIC PLA YBA CK ■ Normal Stereo Reproduction Press STEREO/EFFECT to turn off the sound effect for normal stereo repr oduction. Press STEREO/EFFECT again to turn the sound effect back on.
B ASIC OPERA TION 33 English INTRODUCTION PREP ARA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX DIGIT AL SOUND FIELD PROCESSING (DSP) Understanding Sound Fields A sound field is def ined as the “ characteristic sound reflections of a particular space.
34 DIGIT AL SOUND FIELD PROCESSING (DSP) Sound Field Effect The 6-channel soundtracks found on 70-mm f ilm pr oduce precise sound field localization and rich, deep sound without using matrix processing. This unit ’ s MO VIE THEA TER programs provide the same quality of sound and sound localization that 6-channel soundtracks do.
35 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX DIGIT AL SOUND FIELD PROCESSING (DSP) Features of DSP Programs The follo wing list giv es you a brief description of the sound fields produced by each of the DSP programs.
36 DIGIT AL SOUND FIELD PROCESSING (DSP) No. 9 10 11 11 Program MOVIE THEATER 1 MOVIE THEATER 2 DOLBY DIGITAL DTS DIGITAL SUR PRO LOGIC DOLBY DIGITAL DTS DIGITAL SUR PRO LOGIC PRO LOGIC DTS Neo:6 Features This program creates the extremely wide sound field of a 70-mm movie theater.
37 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX DIGIT AL SOUND FIELD PROCESSING (DSP) T able of Program Names for Each Input Format MOVIE.
38 4 Press PRESET/TUNING l / h once to begin automatic tuning. Press h to tune in to a higher frequency , or press l to tune in to a lower frequenc y .
39 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX TUNING Presetting Stations ■ A utomatically presetting stations (for FM stations) Y ou can use the automatic preset tuning feature to store FM stations.
40 TUNING ■ Manuall y presetting stations Y ou can also store up to 40 stations (8 stations x 5 groups) manually . 1 T une in to a station. See page 38 for tuning instructions. When tuned in to a station, the front panel display shows the frequenc y of r ecei ved station.
41 English INTRODUCTION PREP ARA TION B ASIC OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX Exchanging Preset Stations Y ou can exchange the assignment of two pr eset stations with each other . The e xample below describes the procedure for exchanging preset station “ E1 ” with “ A5 ” .
42 BASIC RECORDING REC OUT/ZONE 2 or REC OUT allo ws you to record one source while watching and/or listening to another source. Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components.
43 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTROL FEA TURES The remote control can operate other A/V components of Y AMAHA and other manufacturers as well as this unit. T o control those components, you must set up remote control with the manufacturer codes.
44 REMOTE CONTR OL FEA TURES Note • Y ou may not be able to operate your Y amaha component even if Y amaha manufacture code is initially set as listed abo ve. In this case, try to set other Y amaha manufacture code(s). 1 Press an input selector button, Å or ı to select the source component y ou want to set up.
45 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES LEARN 5 Press LEARN again to e xit from the setup mode. Notes • Supplied remote control does not store all the manufacturer codes for commercially a vailab vle A V components (including Y amaha A V components).
46 REMOTE CONTR OL FEA TURES LEARN Changing the Source Name in the Display Window Y ou can change the name that appears in the display windo w on the remote control if you want to use the dif ferent name from the original input selector button names. This is useful w hen different component is set in the input selector button.
47 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES Using the Macro Feature The Macro feature makes it possible to perform a series of operations by pressing just one b utton.
48 REMOTE CONTR OL FEA TURES 2 Press a macro b utton f or which y ou want to program the macr o operation. The button you chose for programming the macro operation and the selected component name appear alternately in the display window . Notes •“ A GAIN ” appears in the display window when a b utton other than the macro buttons is pressed.
49 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES 4 Press MA CRO again when the operation sequence you want to pr ogram is complete.
50 REMOTE CONTR OL FEA TURES MACRO MACRO LEARN TRANSMIT RE-NAME STANDBY SYSTEM CLEAR LEARN MACRO OFF ON MACRO PHONO A B CD DVD VCR2/DVR VCR 1 D-TV/LD CBL/SAT CD-R MD/TAPE TUNER V-AUX POWER LEARN PHONO.
51 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES Pressing n alwa ys selects OPTN first SELECT SOURCE Pressing k.
52 REMOTE CONTR OL FEA TURES Each Component Control Area The general operational buttons are sho wn for each area. Some of them may not function depending on the component you hav e. After setting the manufacturer code, press an input selector button, Å / ı , or SELECT k / n to select a component you want to control.
53 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES ST ANDBY 6CH INPUT SOUND SYSTEM PHONO A B CD DVD VCR2/DVR VCR .
54 REMOTE CONTR OL FEA TURES ST ANDBY 6CH INPUT SOUND SYSTEM PHONO A B CD DVD VCR2/DVR VCR 1 TITLE MENU CHAPTER P AUSE STOP PO WER REC HALL 1 EX/ES DSP 10KEY ROCK CONCERT MOVIE THEA TER 1 MOVIE THEA T.
55 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX REMOTE CONTR OL FEA TURES ST ANDBY 6CH INPUT SOUND SYSTEM PHONO A B CD DVD VCR2/DVR VCR .
56 REMOTE CONTR OL FEA TURES ST ANDBY 6CH INPUT SOUND SYSTEM PHONO A B CD DVD VCR2/DVR VCR 1 TITLE MENU CHAPTER P AUSE STOP PO WER REC HALL 1 EX/ES DSP 10KEY ROCK CONCERT MOVIE THEA TER 1 MOVIE THEA T.
57 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX Adjusting the Items on the SET MENU Adjustment should be made with the remote control. Adjustment procedures are explained using SET MENU 2 LO W FRQ TEST as an example.
58 SET MENU LRG SML NONE 1A CENTER SP 4 Press – /+ repeatedly to change the setting of the item. 5 Press k / n repeatedl y until the current DSP program appears or simpl y press one of the DSP program gr oup buttons to exit fr om the SET MENU.
59 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU ■ 1C REAR L/R SP (rear speaker mode) The OSD sho ws large, small or no rear speak er s depending on ho w y ou set this item.
60 SET MENU ■ 1D REAR CT SP (rear center speaker mode) By adding a rear center speaker to your speak er conf iguration, this unit can provide more realistic front- to-back and transitions. The initial setting is “ LRG ” . Note • If “ 1C REAR L/R SP ” is set to NONE, “ 1D REAR CT SP ” will be skipped.
61 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU Normal -10dB 1F MAIN LEVEL Normal -10dB 1F MAIN LEVEL 2 LOW FRQ TEST Use this feature to adjust the output le vel of the subwoofer so it matches that of the other speakers in your conf iguration.
62 SET MENU 5 CENTER GEQ ≥ 300Hz 1kHz 3kHz 10kHz -+ +3dB 100Hz 4 HP TONE CTRL (headphone tone control) Use this feature to adjust the level of the bass and treb le when you use your headphones.
63 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU 6 INPUT RENAME Use this feature to change the name of the input which appears on the OSD or the front panel display . 1 Press an input selector button to select the input you want to c hang e the name of.
64 SET MENU 8 INPUT MODE (initial input mode) Use this feature to designate the input mode for sources connected to the DIGIT AL INPUT jacks when you turn on this unit (see page 29 for details about the input mode).
65 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU 11 D-RANGE (dynamic range) Use this feature to adjust the dynamic range. T his setting is effecti ve only when this unit decodes Dolby Digital signals.
66 SET MENU 12 SP DELA Y Use this feature to adjust the delay of the Center and the Rear Center channel sounds. This feature w or ks when there is sound output from the center speakers with a source like Dolby Digital or DTS, etc.
67 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SET MENU 13 DISPLA Y SET ■ DIMMER Y ou can adjust the brightness of the front panel display .
68 SET MENU 15 6CH INPUT SET Use this feature to set the direction of the signals input into the center and subwoofer channels when the source component is connected to the 6CH INPUT jacks. ■ 15A CENTER to (direction of the center channel signals) This item sets the direction of the signals input into the CENTER jack.
69 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX 3 Press – /+ to adjust the speaker output level. • The control range for the center , left and right rear or rear center speakers is from +10 dB to – 10 dB.
70 Use this feature to automatically set this unit in the standby mode after the amount of time you ha ve set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The slee p timer also automatically turns of f the external components connected to A C OUTLET(S).
71 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX ■ Example of a system configuration and connections Notes • When not using the main room, turn down the v olume of this unit in the main room.
72 ZONE 2 ■ Special considerations when using DTS software The DTS signal is a digital bitstream. T herefore, if you attempt to send the DTS signal to the second room, you will only be able to hear the digital noise sound that could damage your speakers.
73 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SOUND FIELD PROGRAM PARAMETER EDITING What Is a Sound Field? What really creates the rich, full tones of a li ve instrument are the multiple reflections from the walls of the room.
74 SOUND FIELD PROGRAM PARAMETER EDITING 4 Press k / n to select the parameter . 5 Press – /+ to change the parameter value. When you set the parameter to a value other than the f actory- set value, an asterisk mar k (*) appears by the parameter name on the video monitor .
75 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX Large v alue = 2.0 Small value = 0.1 Sound Source T ime T ime T ime Early Reflections Source Sound Level Level Level ■ R OOM SIZE [P . ROOM SIZE f or the presence sound field] Contr ol Range 0.
76 DIGIT AL SOUND FIELD PARAMETER DESCRIPTIONS ■ S. DELA Y (Surround Dela y) Control Range 0 – 49 msec (The range depends on the signal f ormat.) Function: This parameter adjusts the delay for surround signals and surround sound field. ■ S. INIT .
77 English INTRODUCTION PREP ARA TION B ASIC OPERA- TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX SOUND FIELD PROGRAM PARAMETER EDITING DIGIT AL SOUND FIELD PARAMETER DESCRIPTIONS 60 dB 60 dB 60 dB (dB) 60 dB Level T ime REV . LEVEL Source Sound ■ REV .
78 DIGIT AL SOUND FIELD PARAMETER DESCRIPTIONS For 6ch Stereo ■ CT LEVEL (Center Level) Contr ol Rang e 0 – 100 % Function: These parameters adjust the volume le vel for each channel in 6-channel stereo mode.
79 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX TROUBLESHOOTING Refer to the chart below when this unit does not function pr operly .
80 TROUBLESHOO TING Problem The sound suddenly goes off. Only the speaker on one side can be heard. No sound from the effect speakers. No sound from the center speaker. No sound from the rear speakers. No sound from the rear center speaker. No sound from the subwoofer.
81 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX TROUBLESHOO TING Problem Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator on the front panel display does not light up.
82 TROUBLESHOO TING ■ T uner Previously preset stations can no longer be tuned in. FM stereo reception is noisy. There is distortion, and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned in with the automatic tuning method.
83 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX TROUBLESHOO TING ■ Remote contr ol Problem The remote control does not work nor function properly. The remote control does not “ learn ” new functions.
84 GLOSSAR Y ■ Dolb y Surround Dolby Surround uses a four analog channel recording system to reproduce realistic and dynamic sound effects: two left and right main channels (stereo), a center channel for dialog (monaural), and a rear channel for special sound ef fects (monaural).
85 English INTRODUCTION PREP ARA TION B ASIC OPERAIONT AD V ANCED OPERA TION ADDITIONAL INFORMA TION APPENDIX GLOSSAR Y ■ Virtual CINEMA DSP Y AMAHA has developed a vir tual CINEMA DSP algorithm that allo ws y ou to enjoy DSP sound f ield surround effects e ven without any rear speakers b y using virtual rear speakers.
86 SPECIFICA TIONS A UDIO SECTION • Minimum RMS Output Power for Main, Center , Rear , R. Center 20 Hz to 20 kHz, 0.04% THD, 8 Ω ..................................... 110 W • Maximum Power (EIAJ) [China and Gener al models] 1 kHz, 10% THD, 8 Ω .
OWNER’S MANUAL R X-V2300 U A V Receiver Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE., BUENA P ARK, CALIF . 90620, U.S.A. Y AMAHA CANAD A MUSIC L TD. 135 MILNER A VE., SCARBOROUGH, ONT ARIO M1S 3R1, CANADA Y AMAHA ELECTRONIK EUR OP A G.
Ein wichtiger Punkt beim Kauf des Geräts Yamaha RX-V2300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Yamaha RX-V2300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Yamaha RX-V2300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Yamaha RX-V2300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Yamaha RX-V2300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Yamaha RX-V2300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Yamaha RX-V2300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Yamaha RX-V2300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Yamaha RX-V2300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
