Benutzeranleitung / Produktwartung UG129 des Produzenten Xilinx
Zur Seite of 124
R PicoBlaz e 8-bit Embed ded Micr ocontr oller User Guide f o r Spar tan-3, Vir te x-II, and Vir tex -II Pr o FPGA s UG129 (v 1.1.2) J une 24, 2008.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om UG129 (v1.1.2) J u ne 24, 200 8 Xilinx is disclos ing this D ocument and Intell ectual Prop er ty (he reinafter “ the Desig n”) to you for use in the deve lopment of de signs t o op er ate on, or interface with Xilin x FPGAs.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 3 UG129 (v 1.1.2) J une 24, 200 8 R Pr eface Limitations Limited W arranty and Disclaimer These design s are provided to you “ as-is”.
4 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Preface: Acknow ledgmen ts R Acknowledgments Xilinx tha nks the follow ing individual s fo r their cont.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 5 UG129 (v 1.1.2) J une 24, 200 8 Guide Con tents R About This Guide The PicoBlaze™ em bedded micro contro ller is an eff icient, cost-ef fec tive embedded processor cor e for Spartan ® -3, V irtex ® -II, and V irtex-II Pro FPGAs.
6 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Preface: About This Guide R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 7 UG129 (v 1.1.2) J une 24, 200 8 Preface: Limitati ons Limited Warranty and Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limitation of Liabil ity .
8 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 R Increment/Decrement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Negate . . . . . . . . . . . .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 9 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 8: Performanc e Input Clock Freq uency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 R Appendix A: R elated Materials and References App endi x B: Example Progr am Te mpla tes KCPSM3 Syntax . . . . . . . . . . . . . . . . . . . . . . . . .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 11 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 1 Intr oduction The PicoBlaze™ micro controller is a compact, capable, and cost- effective fully embedded 8-bit RIS C microcontrolle r core optimized for the Sp artan ® -3, V irtex ® -II, and V ir tex- II Pro FPGA families.
12 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 1: Intr oduction R • Byte-wide Arit hmetic Logi c Unit (ALU) with CARR Y and ZERO indicator .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 13 UG129 (v 1.1.2) J une 24, 200 8 PicoBlaze Microcontr oller Functional Bloc ks R Other memory organ izations are poss ible to accommodate mor e PicoBlaze contro llers within a single FPG A or to en able intera ctive code updates without recompil ing the FPG A design.
14 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 1: Intr oduction R Progr am Counter (PC) The Program Counter (PC) points to the next instructio n to be executed. By de fault, the PC autom atically increments to the next inst ruction location wh en executing an instruction .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 15 UG129 (v 1.1.2) J une 24, 200 8 Why the PicoBla ze Microcontroller ? R The data registers and scratchpad RAM are not affe cted by Reset. See “RESET Even t” in Append ix C for mor e informa tion.
16 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 1: Intr oduction R performance re quirements. A completely parallel implementation is faster but consumes mo re FP G A res o urc e s. A microcontr oller embedded within the FPGA pr ovides the best of both worlds.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 17 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 2 PicoBlaze Interface Signals The top-level interface sig nals to the PicoBlaz e™ microcontroller appear in Figure 2-1 and are des cribed in Ta b l e 2 - 1 .
18 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapt er 2: PicoBlaz e Interf ace Signal s R PORT_ID[7: 0] Out put Port Address: Th e I/O port address appears o n this port for two CLK cycles during an INPUT or OUTPUT instruction.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 19 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 3 PicoBlaze Instruction Set Ta b l e 3 - 1 sum marizes the en tire PicoBlaze™ processor inst ruction set, which appe ars alphabetica lly . Instructions are listed using the KCPS M3 syntax.
20 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R ENABLE INTERRUP T (EINT) Enable inter rupt input INTERRUPT_ENAB LE Å 1- - Int errupt Even t As ynchronous int errupt inpu t.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 21 UG129 (v 1.1.2) J une 24, 200 8 R RETURNI DISABLE (RETI DISABLE) Return fr om in terr upt servic e r outine .
22 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R Address Spaces As show n in Ta b l e 3 - 2 , th e PicoBlaze m icro controller has five distinct address spaces .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 23 UG129 (v 1.1.2) J une 24, 200 8 Address Space s R T able 3-2: PicoBl aze Address Sp aces and R elated Inst ructions Address Space Siz.
24 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R Pr ocessing Data All data processing inst ructions operate on any of the 16 general-purpose registers.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 25 UG129 (v 1.1.2) J une 24, 200 8 Pr ocessing Data R Complement/In v er t Register The PicoBlaze microcontroller does not have a specific instruction to invert individual bits within register sX .
26 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R operation. ORi ng register sX with a bit mask sets specific bits, as shown in Figure 3-6 . A ‘1’ in the bit mask sets the corresponding bit in register sX .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 27 UG129 (v 1.1.2) J une 24, 200 8 Pr ocessing Data R See als o: • “ADD sX, Operand —Add Operand to Register sX,” page 91 • .
28 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R If incre menting or decrementing a multi-r egister value—i.e., a 16- bit value—perform the operation usi ng multiple instruction s.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 29 UG129 (v 1.1.2) J une 24, 200 8 Pr ocessing Data R If multiplicatio n performance is important to the application, connect one of th e FPGA ’s 18x18 hardwar e multipliers the PicoBlaze I/O ports, as shown in Figur e 3-15 .
30 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R Division The PicoBlaz e microcon troller cor e does not have a dedicated h ardwar e di vider .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 31 UG129 (v 1.1.2) J une 24, 200 8 Pr ocessing Data R No Oper ation (NOP) The PicoBlaze i nstruction set does no t have a specific NOP instruction .
32 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R A similar NOP techniq ue is to simply jump to th e next instruction, which is equiva lent to the default program flow .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 33 UG129 (v 1.1.2) J une 24, 200 8 Pr ocessing Data R Each bit of r egister sX is logically ANDed wit h either the contents of register sY or a lit eral constant, kk . The operation sets the Z ERO flag if the result of all bitwise AND opera tions is zero.
34 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R The example in Figure 3-25 demonstrates how to generate parit y for all eight bits in a reg i st e r . See also “TEST sX, Operand — T est Bit Location in Register sX, Generate Odd Parity ,” page 11 6 .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 35 UG129 (v 1.1.2) J une 24, 200 8 Pr ocessing Data R See als o: • “SL[ 0 | 1 | X | A ] sX — Shif t Left Regi ster sX,” pa ge 10.
36 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R Mo ving Data Data move ment between va rious resources is an essential mi crocontroller function. Figure 3-26 show s th e va riou s Pic oBla ze i n str uct ions to mo ve data .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 37 UG129 (v 1.1.2) J une 24, 200 8 Progr am Flow Contr ol R The JUMP , CALL , an d RETURN instructions are all conditio nally executed, dependin g if a condition is specified and specifi cally whether the CAR R Y or ZERO flags are set or cleared.
38 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R The JUMP instruction does not af fect the ZERO and CAR R Y flags. All jumps ar e absolute; there ar e no relative jumps.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 39 UG129 (v 1.1.2) J une 24, 200 8 Progr am Flow Contr ol R RETURN instructions themselves.
40 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 3: PicoBlaz e Instruction S et R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 41 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 4 Interrupts The Pico Blaz e™ p r oces sor pr o vide s a s ing le in ter ru pt in pu t sig na l.
42 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 4: Interrupts R A special RETURNI command ensur es that the end of an interr upt service routine r estor es the status of the flags and contr ols the enable of futur e interrupts.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 43 UG129 (v 1.1.2) J une 24, 200 8 Example Interrupt Flow R 3. The PicoBlaze microcontr oller recognizes the interrupt and pr eempts the ADD s0,s1 instruction. The current PC, which points to the ADD s0 s1 instruction, is pushed onto the CALL/RETURN stack.
44 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 4: Interrupts R Figure 4-3 shows th e same interrupt procedur e but as a timing diagram. W ith the int errupt enabled, the INTERRUPT input is r ecognized a t Step (2), the same clock cycle where the ADDRESS bus changes va lue.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 45 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 5 Scratchpad RAM The PicoBlaz e™ micr ocontr oller contains a 64-byte s cratchpad R AM. T w o ins tructio ns, STORE and FETCH , move data between any data r egister and the scratchpad R AM.
46 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 5: Scratc hpad RAM R Impl eme nting a Lo ok-U p T ab le The next few exam ples demonstrate both the flexibility of the scratchpad R AM and indirect ad dress ing.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 47 UG129 (v 1.1.2) J une 24, 200 8 Stack Operat ions R Stack Operations Although the Pi coBlaze microcontroller has a CALL/RETUR N stack, it does not have a dedicated data st ack.
48 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 5: Scratc hpad RAM R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 49 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 6 Input and Output Ports The PicoB laze™ microcontroller sup ports up to 256 input ports an d 256 output ports that can also be combined to create in put/ou tput ports.
50 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 6: Input and Output P orts R INPUT Operatio ns An INPUT operation transfers the data supplie d on the IN_PORT input port t o any on e of the 16 data registers, defined by register sX , as shown in Figure 6-1 .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 51 UG129 (v 1.1.2) J une 24, 200 8 INPUT Operations R In this example, the PicoBlaze mi crocontr oller is r eading data fro m the port addr ess defined by the contents of r egister s7 . The r ead data is captured in r egister s0 .
52 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 6: Input and Output P orts R Failure to include a register any where in the path from POR T_ID to IN_P OR T is the most common reason for decrea sed system clock rates.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 53 UG129 (v 1.1.2) J une 24, 200 8 OUTPUT Operations R OUTPUT Operations As show n in Figure 6-5 , an OUTPUT operation pr esents the contents of any of the 16 registers to the OUT_POR T output po rt.
54 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 6: Input and Output P orts R Simple Output St ructure f or F e w Output Destinations For eight or less simple output ports, use “o ne-hot” port addr esses and only decode the appropri ate PO R T_ID sign al, as s hown in Fig ure 6-7 .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 55 UG129 (v 1.1.2) J une 24, 200 8 OUTPUT Operations R As show n in Figure 6-8 , use CONSTANT dire ctives in the program make the code readable and help ensur e that the corre ct ports ar e decoded.
56 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 6: Input and Output P orts R Pipel ining f or Maxim um P erf orm ance In most applications, the PicoBlaze micr ocon troller has more than sufficient performance to meet application requir ements.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 57 UG129 (v 1.1.2) J une 24, 200 8 Pipelining for Maximum P erf ormance R The pipelinin g registers on the OUT_PORT and PORT_ID signals , shaded in Figure 6-9 , are optional. Both OU T_POR T and POR T_ID are valid for two clock cycles.
58 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 6: Input and Output P orts R Repar titioning the Design for Maxim u m P erformance Another appr oach to maximizing performance is to re-evaluate the system requir ements.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 59 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 7 Instruction Storage Configurations The PicoBlaze™ micr ocontroller executes code fr om memory resour ces embedded within the FPGA. Fig ur e 7-1 show s that the PicoBlaze microcontroller actually consists of two subfunctions.
60 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 7: Instruction Stor age Configurations R Stand ar d Configur atio n with U AR T or JT A G Pr o.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 61 UG129 (v 1.1.2) J une 24, 200 8 T wo PicoBlaz e Microcontrollers with S eparate 512x1 8 Code Images in a Block RAM R T wo PicoBlaze M.
62 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 7: Instruction Stor age Configurations R T o maintain com patibility wi th block RAM, the dis tributed ROM must have a registered output using CLB flip-flops.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 63 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 8 Performance Input Clock Frequency Ta b l e 8 - 1 shows the maximum available perform ance for the PicoBlaze™ microcontr oller using various FPG A families and speed grad es.
64 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapt er 8: P erf ormance R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 65 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 9 PicoBlaze Development T ools There are thr ee primary development environments for cr eatin g PicoBlaze™ pro cessor applicatio n code, as sum marized in Ta b l e 9 - 1 .
66 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 9: PicoBlaz e Development T ools R Open a DOS b ox and navigate to the wo rking directory . T o assemble the PicoBlaz e program, type: kcpsm3 <filename>[.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 67 UG129 (v 1.1.2) J une 24, 200 8 Mediatr onix pBlazIDE R The assembler al so produces a log file plus files that sho w the assign ments for va rious labels and consta nts found in the source code.
68 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 9: PicoBlaz e Development T ools R Impor ting KCPSM3 Code into pBlazIDE The pBlazID E syntax and in structi on mnemo nics ar e dif fer ent than the Xilinx K CPSM3 syntax.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 69 UG129 (v 1.1.2) J une 24, 200 8 Differences Between the K CPSM3 Asse mbler and pBla zIDE R Differences Between the KCPSM3 Assem bler and pBlazIDE Ta b l e 9 - 2 detai ls the diff erences between the KCPSM3 and pBlazID E instruction mnemo nics.
70 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 9: PicoBlaz e Development T ools R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 71 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 10 Using the PicoBlaze Micr ocontr oller in an FPGA Design The PicoBlaze ™ microcontr oller is primaril y designed for use in a VHDL desi gn flow .
72 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 10: Usi ng the PicoBlaze Mi cr ocontr oller in an FPGA Design R Connecting the P rogr am R OM The PicoBlaze pr ogram ROM is used w ithin a VHDL design flow .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 73 UG129 (v 1.1.2) J une 24, 200 8 Black Bo x Instan tiation of KCPS M3 using KCP SM3.ngc R Black Bo x Instantiation of KCPSM3 us ing KCPSM3.ngc The Xilinx NGC file included with th e r eferen ce design was g enerated by synthesizing the KCPSM3.
74 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 10: Usi ng the PicoBlaze Mi cr ocontr oller in an FPGA Design R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 75 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 1 1 Assembler Dir ectives Both the KCPSM3 and pBlazIDE assemblers include dir ectives that pro vide advanced control. Locating Co de at a Specific Address In some cases, application code m ust be assigned to a specific instructio n address.
76 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 11: Assembler Directives R Defining Co nstants Similar to renaming registers, assign names to con stant values.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 77 UG129 (v 1.1.2) J une 24, 200 8 Defining I/O Po r ts (pBlazIDE) R Input P or ts The DSIN directive defines the name and the por t address (or po rt identification number) for a read-only input po rt.
78 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 11: Assembler Directives R specifies a te xt file that records the result of any outp ut operatio ns to this d uring instruction se t simulation.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 79 UG129 (v 1.1.2) J une 24, 200 8 Custom Instruction Op-Codes R Dur ing in str uct ion set s imula tio n, p BlazI DE dis pla ys th e r ead able o utpu t por t as s hown in Figure 1 1-8 .
80 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chap te r 11: Assembler Directives R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 81 UG129 (v 1.1.2) J une 24, 200 8 R Chapter 12 Simulating PicoBlaze Code V a rious tools support PicoBlaze code simulation, each with distinct st r engths and weakne sses as des cribed in T able 12-1 .
82 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 12: Simulating PicoBlaze Code R Furthermore, the pBlazIDE ISS o f fers full single-step and breakpoint support whi le viewing the PicoBlaze assembly source code.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 83 UG129 (v 1.1.2) J une 24, 200 8 Instruction Set Sim ulation with pBlazIDE R Sim ulator Control Butt ons Ta b l e 1 2 - 2 shows the vario us pBlazIDE control buttons and describes thei r functions.
84 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 12: Simulating PicoBlaze Code R Using the pBlazIDE Inst ruction Set Simulator with KCPSM3 Pro gr ams The pBlazIDE so ftware primarily supports on ly a VHDL design flo w , which is su f ficient for many appl ications.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 85 UG129 (v 1.1.2) J une 24, 200 8 T urbocharging Sim ulation using FPGAs! R T urboc har ging Sim u latio n usi ng FP GAs! Har dwa r e si mula tor s tr ack r esults with p ico sec ond or na noseco nd res olu tion .
86 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter 12: Simulating PicoBlaze Code R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 87 UG129 (v 1.1.2) J une 24, 200 8 R Appendix A Related Materials and Refer ences This appendix provides links to a dditional inf ormation relevant to a PicoBlaze™ processor design.
88 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Chapter : Re lated Materials and References R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 89 UG129 (v 1.1.2) J une 24, 200 8 R Appendix B Example Pr ogram T emplates The following code templates pr ovide the basic r ecommended structur e for PicoBlaze™ processor application programs.
90 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Appendi x : Exampl e Program T emplate s R pBlazIDE Syntax Figure B-2 provides a code template for creating PicoBlaze applica tions using the pBlazI DE ass embler .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 91 UG129 (v 1.1.2) J une 24, 200 8 R Appendix C PicoBlaze Instruction Set and Event Refer e nce This appendix provides a detailed o perationa l description of each PicoBl aze™ processor instruction and th e Interrupt and Reset events, inclu ding pseudocod e for each instruction.
92 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R Pseudocode sX Å (sX + Operand) mod 256.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 93 UG129 (v 1.1.2) J une 24, 200 8 AND sX, Operand — Logical Bitwise AND Registe r sX with Operand R Pseudocode if (CARRY = 1) then sX.
94 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R Examples AND sX, sY ; Logically AND the.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 95 UG129 (v 1.1.2) J une 24, 200 8 CALL [Condition,] Addr ess — Call Subroutine a t Specified Address, P ossib ly with Conditions R Condition Depending on the specified Con dition, the program calls the subroutine beginni ng at the specified Address.
96 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R COMP ARE sX, Operand — Compare Operand with Re gister sX The COMPARE inst ruct ion pe rforms an 8-bit comparis on of t wo operan ds, as s hown in Figure C-4 .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 97 UG129 (v 1.1.2) J une 24, 200 8 DISABLE INTERRUPT — Disable External Interrupt Input R DISABLE INTERRUPT — Disable External Interrupt Input The DISABLE INTERRUPT instruction clears the interrupt enable (IE) flag.
98 www .xilinx.c om PicoBlaze 8- bit Embedde d Micr oco ntrol ler UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R FETCH sX, Operand — Read Scratchpad RAM Location to Reg ister sX The FETCH instruction r eads s cratchpad RAM location specified by Operand in to register sX , as shown in Figure C-5 .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 99 UG129 (v 1.1.2) J une 24, 200 8 INPUT sX, O perand — S et PORT_ID to Opera nd, Read v alue on IN_ PORT into Register sX R INPUT sX,.
100 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R INTERR UPT Event, When En abled The interrupt event is not an instructio n but the response of the PicoBlaze microcontroller to an external i nterrupt input.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 101 UG129 (v 1.1.2) J une 24, 200 8 JUMP [Condition,] Address — J ump to Specified Addr ess, P ossibl y with Conditions R JUMP [Condit.
102 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R LO AD sX, Operand — L oad Register sX with Op erand The LOAD instruction load s the contents of any register .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 103 UG129 (v 1.1.2) J une 24, 200 8 OR sX, Operand — Logical Bitwise OR Register sX with Operand R OR sX, Operand — Logical Bitwise OR R egister sX with Operand The OR instruction performs a bitwise logical OR operation between two operands, as shown in Figure C-6 .
104 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R OUTPUT sX, Op erand — Write Register .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 105 UG129 (v 1.1.2) J une 24, 200 8 RESET Ev ent R RESET Event The reset event is not an instruction but the response of the Pico Blaze microcontroller when the RESET in put is High.
106 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R RETURN [Con dition] — Return from Subroutine Call, P os sibl y with Condition s The RETURN instruction is the compl ement to the CALL ins truction.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 107 UG129 (v 1.1.2) J une 24, 200 8 RETURNI [ENABLE/DISABLE] — Return from Interr upt Service Routine and Enable or Dis able R PBlazID.
108 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R RL sX — Rot ate Left Register sX The rotate left instruction operates on any sing le data r egister .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 109 UG129 (v 1.1.2) J une 24, 200 8 SL[ 0 | 1 | X | A ] sX — S hift Lef t Reg ist er sX R Example RR sX; Rotate right.
110 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R Examples SL0 sX; Shift left. 0 shifts into LSB, MSB shifts into CARRY. SL1 sX; Shift left.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 111 UG129 (v 1.1.2) J une 24, 200 8 SR[ 0 | 1 | X | A ] sX — Shift Ri ght Register sX R The ZERO flag is alwa ys 0 afte r executing th e SR1 instruction beca use re gister sX is never zero.
112 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R Registers/Flags Al tered Register s: sX.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 113 UG129 (v 1.1.2) J une 24, 200 8 SUB sX, O perand —Su btract O perand from Regi ster sX R The STORE instruction is only s upported on PicoBlaze mi cr ocontrollers for Spartan -3, V irtex-II, and V irtex-II Pro FPGAs.
114 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R Pseudocode sX Å (sX – Operand) mod 2.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 115 UG129 (v 1.1.2) J une 24, 200 8 SUBCY sX, Operand —Subtract Operand from Re gister sX with Borro w R Description Operand an d CARR Y flag ar e subtracted fr om r egi ster sX . The Z ERO an d CA RR Y flag s are set appropriately .
116 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R TEST sX, Operand — T est Bit Loc ation in Register sX, Ge nerate Odd P arity The TEST inst ruct ion p erfo rms t wo rel ated but separ ate oper atio ns.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 117 UG129 (v 1.1.2) J une 24, 200 8 TEST sX, Operand — T est Bit Location in Register sX, Generate Odd P arity R Pseudocode ; logicall.
118 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appen dix : Pico Blaze In struction S et and Event Reference R XOR sX, Operand — Logical Bitwise XOR Register sX with Operand The XOR instruction performs a bitwise logical XOR operation between two o perands, as shown in Fig ure C-13 .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 119 UG129 (v 1.1.2) J une 24, 200 8 R Appendix D Instruction Codes Ta b l e D - 1 provides the 18-bit i nstruction code for every P icoBlaze™ processor instruction.
120 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Append ix : Instruction Codes R JUMP Z 11010100aa aaaaaaaa LOAD sX,kk 0 0 0 0 0 0 x x x x k k k k k k .
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 121 UG129 (v 1.1.2) J une 24, 200 8 R XOR sX,kk 0 0 1 1 1 0 x x x x k k k k k k k k XOR sX,sY 0 0 1 1 1 1 x x x x y y y y 0 0 0 0 Ta b l.
122 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Append ix : Instruction Codes R.
Pico Blaz e 8- bit Em bedded Microco ntrolle r www .xilinx.c om 123 UG129 (v 1.1.2) J une 24, 200 8 R Appendix E Register and Scratc hpad RAM Planning W orksheets This appendix provides worksh eets to plan register assign ment and alloca tion for a PicoBlaz e™ pr ocess or applic ation.
124 www .xilinx.com PicoBla ze 8-bit Em bedded M icr ocontr oller UG129 (v 1.1.2) J une 24, 200 8 Appendi x : Register and Scratc hpad RAM Planning W orksheets R Scratchpad RAM Loc.
Ein wichtiger Punkt beim Kauf des Geräts Xilinx UG129 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Xilinx UG129 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Xilinx UG129 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Xilinx UG129 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Xilinx UG129 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Xilinx UG129 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Xilinx UG129 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Xilinx UG129. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Xilinx UG129 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
