Benutzeranleitung / Produktwartung NB-14w2 des Produzenten Westinghouse
Zur Seite of 86
www .westinghousedigital.com USER’S MANUAL MANUAL DEL USUARIO NB-14w2 Notebook Computer Westinghouse Digital Electronics Santa Fe Springs, CA SE-UM-1401-0601.
i -1.
i -2 Notice The information in this user ’s manual is subject to change without notice. THE MANUF ACTURER OR RESELLER SHALL NO T BE LIABLE FOR ERRORS OR OMISSIONS CONT AINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MA Y RESUL T FROM THE PERFORMANCE OR USE OF THIS MANUAL.
i -3 T ABLE OF CONTENTS PREF ACE Symbols and Conventions Protecting Y our Computer - Avoid Abusive Handli ng and Adverse Environment Chapter Summaries 1.
i -4 BIOS Action Keys (2-3) Modifying the BIOS Settings (2-4) Main Setup (2-4) Info Setup (2-4) Advance Setup (2-5) Security Setup (2-5,6) Power Setup (2-6) Boot Setup (2-7) Exit Setup (2-8) 3.
i -5 Performance Problems (4-14) Firewire (IEEE1394) and USB2.0 Probl ems (4-15) Additional Questions (4-16) APPENDIX A Product Specification APPENDIX B A gency Regulatory Notices.
i -6 Preface Using This Manual This User ’s Manual contains gen eral info rmation about the hardware and sof tware setup, trouble shooting, and technical specifications of the notebook computer .
i -7 Protecting Y our Computer - Av oid Abusive Handling and Adverse Environment Follow the advice below will help en sure that you get the most out of your Investment. Y our computer will serve you well if you t ake g ood care of it. Do not expose the computer to direct sunlight or pla c e it near sources of heat.
i -8 Keep the adapter away from children. The total ampere ratings of the equipm ent plugged in should not exceed the ampere rating of the cord if you are using an extension cord. The total current rating of all equipment plugg ed into a single wall outlet should not exceed the fuse rating.
i -9 Chapter Summaries The following is a summary of the available chapters and appendices in this manual . Chapter 1: Getting to Know the Basics In this chapter , you will learn the basic operations and features of your computer . It gives you a general understanding o f the component s of your computer .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-1 CHAPTER ▼ ONE GETTING T O KNOW THE BASICS This chapter introduce s the features and component s of the computer .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-2 Performance Features High Performance Processor w ith A TI Radeon Xpress 200M Chip set The notebook PC is equipped with a po werful Mobile Intel Celeron M processo r .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-3 Firewire (IEEE1394 / 1394a) and USB2.0 port s In addition to a full array of built-in I/O por t s, the computer offers IEEE1394 for ultra hi gh-sp eed connection to high bandwidt h digital video devices a nd USB2.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-4 System At A Glance T op V iew 1. LCD Display The panel is whe re the system content is displayed.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-5 3. Keyboard The keyboard is used to en ter data. (See Keyboard Section for details.) 4. T ouch Pad The touch pad is a built-in pointing device with functions similar to a mouse. 5. Built-in Microphone The built-in microphone record s sound.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-6 Front Vie w W arning: Do not place any heavy objects on the top of notebook. This may damage the display 1. Wireless On/Off S witch Use the Switch to disable or enable the Wireless fun ction.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-7 Side Vie w s W arning: Do not place any heavy objects on the top of notebook. This may damage the display 1.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-8 4. Modem Port This is where you plug the phone jack (RJ-1 1) for fax/modem functions. 5. Kensington Lock Key Hole A Kensington-type security lock latche s to this keyhole for anti-theft purpose.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-9 12. Ethernet / LAN Port The port connect s to a network hub via the RJ-45 cable and also conforms to 10/100Base -TX transmission protocol. 13. V entilation Grill The fan grill is where air is exchanged t o dissipate the internal heat.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-10 Bottom Vi ew 1. Battery Pack and Battery Latch The battery pack is a built-in power sou rce for the notebook. Slide the battery latch to release the battery pack. 2. V entilation Grill The fan grill is where air is exchanged t o dissipate the internal heat.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-1 1 W arning: Do not block the Fan Grill outlet. Place the machine on hard surface only . The bottom case may get very hot. 3. System Device Cov er The system’ s processor with cooler assembly , Wireless LAN module, HDD, and DDR memory mo dule are located under the case cover .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-12 AC Adapter 1. DC-out Connector The DC-out connector docks to the power jack (DC-in) on the computer . 2. Adapter The adapter convert s alternating current into constant DC voltage for the computer .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-13 LED S tatus Indicator The LED S tatus Indicator d isplays the operating st atus of your notebook. When a certai n function is enabled, an LED will light up. The following section describes it s indication.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-14 OSD S tatus Indicator The On-screen S tatus Displ ay Indicator displays the operating status of your notebook. When a cert ain function is enabled, the symbol will show up on windows.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-15 Keyboard Features Function Keys (Quick Key s) Graphic Symbol Action System Control Fn + F1 Enters Suspend Mode. Fn + F3 T urns of the battery warning beep off or o n. Fn + F4 Changes Display Mode: LCD-only , CRT -only and LCD&CRT .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-16 Windows Keys Y our keyboard also has two Windows keys: 1. S tart Key This key allows you to p ull up the Windows S tart Me nu at the bottom of the taskbar .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-17 T ouch Pad The built-in touch pad, which is a PS/2-comp atible pointing device, senses movement on it s surface. As you move your fingertip on the surface of the pad, the cu rsor responds accordingly .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-18 Graphic Subsystem Y our computer uses a high performance 14.1-inch active matrix TFT p anel with high resolution and multi -million colors for comfortabl e viewing.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-19 Opening and Closing the Display Panel T o open the display , lift up the lid. Then tilt it to a comfortable viewing position. The LCD panel has a maximum op ening of 135 degrees. Do not push i t down forcibly .
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-20 Audio Subsystem Y our computer ’s audio sub system is Sound Blaster Pro-compatibl e. Adjusting the V olume Manually T o increase the volume, press Fn+F5. T o decrease the volume, press Fn+F6.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-21 Modem Y our computer comes with a 56K V .92 internal fax/modem and a phone jack (RJ-1 1), whi ch is located on the left side of your co mputer . Use a telephone cable to conne ct the computer to the telephone wall outlet.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-22 2. Click on the pull-do wn menu and select the count ry where it is applicable. Click on OK to exit.
■ C h a p t e r 1 G e t t i n g T o K n o w T h e B a s i c s 1-23 Ethernet Y our computer is equipped with a 10/100 Base-TX Fast Ethernet network adapter . Connect the active LAN ca ble to the RJ-45 LAN port located on the left side of the computer .
■ Chapter 2 Bios Setup and Security Feature 2-1 CHAPTER ▼ TWO BIOS SETUP AND SECURITY FEA TURE In this chapter , you will learn how to enter the BIOS Setup Menu and manipulate various hardware control settings. Y ou will also learn how to use the built-in security features.
■ Chapter 2 Bios Setup and Security Feature 2-2 The Setup Utility is a hardware conf iguration program built into your computer ’s BIOS (Basic I nput/Output System). It runs a nd maintains a variety of hardware functio ns. It is a menu-driven software, which allo ws you to easily configure and change the settings.
■ Chapter 2 Bios Setup and Security Feature 2-3 Entering the BIOS Setup Screen First turn on the power . When the BIOS performs the POST (Power-On Self T est), press F2 ke y quickly to activate the Pheonix BIOS Setup Utility . Note: Y ou may need to press F2 key fairly quickly .
■ Chapter 2 Bios Setup and Security Feature 2-4 Modifying the BIOS Settings The Phoenix BIOS setup main menu is subdivided into sub-menus. Each menu item is described in this section. Main Setup Under this menu, you may change time/date and view ba sic processor and system memory inform ation.
■ Chapter 2 Bios Setup and Security Feature 2-5 Advanced Setup Item Selections / Sub-menu Description Execute Disable Bit Disabled Enabled When enabled, this unique feature protects against certain type of virus that creates Buffer Overflow problem in the memory subsystem.
■ Chapter 2 Bios Setup and Security Feature 2-6 provides both a Supervisor and a User password. If you try to activate both passwo rds, the Superv isor p assword must be set first. The passwords activate two diff erent levels of protecti on: 1. System always asks for p assword every time it is powered on.
■ Chapter 2 Bios Setup and Security Feature 2-7 Boot Setup ► Boot Settings Configuration Item Selections / Sub-menu Description LAN Remote Boot Disabled Enabled When enabled, the system can supp ort remote wake-up or boot on LAN.
■ Chapter 2 Bios Setup and Security Feature 2-8 Exit Setup Item Selections / Sub-menu Description Saves Changes and Exit N/A After you have completed the BIOS settings, select this item to s ave all settings, exit BIOS Setup utility , and reboot. New system settings will t ake effect on next power-up.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-1 CHAPTER ▼ THREE BA TTER Y POWER & POWER MANAGEMENT In this chapter , you will learn the fundamentals of power management and how to use it to achieve longer battery life.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-2 In this chapter , you will learn how to operate your no teboo k on battery power , how to handle and maintain the battery p ack, and learn about the system’ s power saving features.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-3 Battery Low-Power W arning 1. Low Battery W arning Low battery condition occurs when battery power is reduced to 6%. The green battery status LED indicator blinks and the system beep s once every 16 seconds o r so.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-4 Installing and Removing the Battery Pack T o Remove the Battery Pack: 1. Place the notebook bottom-side up on a flat and secured surface. 2. Push the latch and pull the battery’s hard case away from the notebook.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-5 T o Install the Battery Pack: 1. Place the notebook bottom-side up on a flat and secured surface. 2. Carefully insert the battery pack into the battery compartment of the notebo ok.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-6 Checking the Battery Level Y ou can check the remaining battery power in the Windows battery status indicator , which i s located at the lower ri ght-hand corner of the task bar .
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-7 Using Windows Power Options Windows Power Manage ment provides basic power saving features.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-8 In this dialog box, you can manually set the LCD and hard drive’ s time-out value s in the Plugged in colu mn and in the Running on batteries column. Lower time-o ut values will save more battery power .
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-9 Suspend Mode St andby Suspend The system automatically enters this mo de af ter a period of inactivity , which is set in the Power Schem es dialog box. In S tandby mode, hardware devices, such as display panel and ha rd di sk, are turned of f to conse rve energy .
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-10 Note: Do not install or remove the memory module when the system is in the suspend mode.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-1 1 Power Button Action The notebook PC’ s power button can be set to turn of f the system or activate the suspend mode. Go to [S tart > Settings > Control Panel > Power Options] and click on the Advanced tab.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-12 Low Battery W arning Y ou can define when and how the syste m warns you of its battery-lo w condition. Go to the Alarms tab in the Power Options Propertie s box. If you wish to hear audible beep s, click on the Alarm Action button and put a check on Sound Alarm.
■ C h a p t e r 3 B a t t e r y P o w e r & P o w e r M a n a g e m e n t 3-13 Power Menu Quick Access Instead of making specific sele ction s in the Power Options Properties box, you can quickly and ea sily specify which pre-set power saving fun ction you desire by clicking on the Battery icon at the lower right-hand corner of the task bar .
■ Chapter 4 T roubleshooting 4-1 CHAPTER ▼ FOUR TROUBLESHOOTING In this chapter , you will learn how to solve common hardware and sof tware problems.
■ Chapter 4 T roubleshooting 4-2 Y our computer has been fully tested and complies with the system specifications befor e ship ping. However , incorrect operations and/or mishandling may caus e problems. This chapter provides a reference for ide ntifying and correcting common hardware and sof tware problems that you may encounter .
■ Chapter 4 T roubleshooting 4-3 changes you made, try to restore all the settings to factory defaults. Be sure all the device drivers are inst all ed properly . For example, without the audio driver properl y inst alled, the speakers and micro phone will not work.
■ Chapter 4 T roubleshooting 4-4 Audio Problems No speaker output - Software volume cont rol is turned down in Microsoft Sound System or is muted. Double-cli ck the speaker icon on the lower right corner of the taskbar to see if the speaker has been muted o r turned down all the way .
■ Chapter 4 T roubleshooting 4-5 Hard Disk Problems The hard disk drive does not work or is not recognizable - The new HDD may need to be partitioned and reformatted. O/S and drivers will need to be re-inst alled as well. Check the hard disk indicat or LED.
■ Chapter 4 T roubleshooting 4-6 The hard disk t akes longer to read a file - If you have b een using the drive for a period, the files may be fragmented. Go to [S tart > Programs > Accessories > System T ools > Disk Defragmenter] to perform a disk defragment ation.
■ Chapter 4 T roubleshooting 4-7 Optical Drive Problems The optical drive does not work - T r y rebooting the system. The disk is damaged or files are not re adabl e. After you have inserted a CD-ROM disk, it may take a moment before you can access it s content.
■ Chapter 4 T roubleshooting 4-8 Display Problems The display p anel is blank when the system is turned on - Make sure the computer i s not in the S tandby or Hibernate suspend mod es. The display is turned of f to conserve energy in these modes.
■ Chapter 4 T roubleshooting 4-9 Keyboard and Mouse Problems The built-in touch p ad performs erratically Make sure there is no excess perspi ration or humidity on your hand when using the t ouc h p ad. Ke ep the surfa ce of the touch pad clean a nd dry .
■ Chapter 4 T roubleshooting 4-10 CMOS Battery Problem A message “CMOS Checksum Failure” display s during the booting process or the ti me (clock) reset s when booting - T ry to reboot the system.
■ Chapter 4 T roubleshooting 4-1 1 Memory Problems The POST does not show an increased memory capacity when you have already inst alled additional memory - Certain brand s of memory module m ay not be compatible wi th your system. Y ou should ask your vendor for a list of compatible DIMM.
■ Chapter 4 T roubleshooting 4-12 Modem Problems The built-in modem does not respond - Make sure the modem driver is loa ded p roperly . Go to [S tart > Settings > Control Panel > Phone and Modem Options] and go to Modems t ab. Make sure Motorola SM56 Data Fax Modem i s listed.
■ Chapter 4 T roubleshooting 4-13 Network Adapter / Ethernet Problems The Ethernet adapter does not w ork - Go to [S tart > Settings > Control Panel > System > Hardware > Device Manager]. Double-click on Network Adapters and check if Re al tek RTL8139/810x Family Fast Ethernet NIC appears as one of the adapters.
■ Chapter 4 T roubleshooting 4-14 Performance Problems The computer becomes hot - In a 35 o C environment, the cert ain areas of the computer ’ s b ack ca se are expected to reach 50 degrees.
■ Chapter 4 T roubleshooting 4-15 Firewire (IEEE1394) and USB2.0 Problems The USB device does not w ork - Windows NT 4.0 does not support USB protocol s Check the settings in the Windows Control Panel. Make sure you have inst alled the necessary devi ce drivers.
■ Chapter 4 T roubleshooting 4-16 Additional Questions See our website at www.westinghoused i gital.com. Contact Westinghouse Digital Customer Service at (866) 287-5555 or write u s service@westinghousedigital.
■ Appendix A Product Specific ation A -1 APPENDIX ▼ A PRODUCT SPECIFICA TION.
■ Appendix A Product Specific ation A -2 ▼ Processor and Core Logic Mobile Intel Celer on M Processor (Yon ah), up to 1.73GHz, 1MB L2 cache A TI RC410MD + A TI SB460 chipset with graphic, audio, modem, and USB2.
■ Appendix A Product Specific ation A -3 ▼ Audio A TI SB460 integrated audio controller Realtek Audio Codec DirectSound 3D, EAX 1.0 & 2.0 compatible A3D, I3DL2 compatible AC97 V2.
■ Appendix A Product Specific ation A -4 ▼ LAN / Ethernet Realtak RTL8100CL Ethernet function f or 10/100Base-TX network standard s Windows XP Plug and Play compatible Automatic Jam and auto-negotiation for flow control Auto Negotiation and Parallel detectio n for automatic speed selection (IEEE 802.
■ Appendix A Product Specific ation A -5 ▼ Keyboard & T ouch pad 86/87-key QWERTY keyboard with numeric keyp ad and Windows keys, 19.05mm Pitch Built-in T ouch Pad ▼ ExpressCard (NewCard) &a.
■ Appendix A Product Specific ation A -6 ▼ Battery Pack / AC Adapter Li-ion 6-Cell pack, 10.8V / 1 1.1V x 4000 mAH or Li-ion 6-Cell pack, 10.8V / 1 1.
■ Appendix A Product Specific ation A -7 ▼ Physical Specification 332 (W) x 232 (D) x 23.5~33.8 (H) mm 2.4KG / 5.28lbs (with 14.1” LCD, DVD-ROM Drive an d 6-cell battery pack) Operating T empera.
■ Appendix B A gency Regulato ry N otices B-1 APPENDIX ▼ B AGENCY REGULA TOR Y NOTICES.
■ Appendix B A gency Regulato ry N otices B-2 Federal Communications Commission Notice This equipment has bee n tested an d found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona ble prot ection against har mful interference in a residential installation.
■ Appendix B A gency Regulato ry N otices B-3 EN55022 : 1998+A1: 2000+A2: 2003, CLAS S B EN61000-3-2 : 2000 EN61000-3-3 : 1995+A1: 2001 EN55024 : 1998+A1 : 2001+A1: 2003 IEC61000.
■ Appendix B A gency Regulato ry N otices B-4 Att achment Limitations St atement '' Notice: This equipment meets telecommu ni cations network protective, operational and safet y requir ements as pre scribe d in the appropriate Terminal Equipment T echnical Requirements document(s).
■ Appendix B A gency Regulato ry N otices B-5 The cord set must have a rated current capacity of at least 10 A. The attachment plug must be an earth-grounding t ype with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15 A, 250V) configuration.
■ Appendix B A gency Regulato ry N otices B-6 The cord set must have a current capacity of at least 10 A and a nominal voltage rating of 125 / 250 V AC.
■ Appendix B A gency Regulato ry N otices B-7 only with same or equivale nt typ e recommended by the manufacturer . Discard used batteries according to the manufacturer ’s instructions or local laws. VORSICHT! Explisionsgefa hr bei unsachgernazen Austausch der Batterie.
■ Appendix B A gency Regulato ry N otices B-8 Discard used batteries according to the manu f acturer ’s instructions. A TTENTION: Il y a danger d’xplosion s’il y a remplac eme nt incorrect d e la batterie. Remplacer uniquement a vcc unc batterie du meme type ou d’un type recommande par le constructer .
www .westinghousedigital.com USER’S MANUAL MANUAL DEL USUARIO NB-14w2 Notebook Computer Westinghouse Digital Electronics Santa Fe Springs, CA SE-UM-1401-0601.
Ein wichtiger Punkt beim Kauf des Geräts Westinghouse NB-14w2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Westinghouse NB-14w2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Westinghouse NB-14w2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Westinghouse NB-14w2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Westinghouse NB-14w2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Westinghouse NB-14w2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Westinghouse NB-14w2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Westinghouse NB-14w2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Westinghouse NB-14w2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
