Benutzeranleitung / Produktwartung WLTL29712.0 des Produzenten Weslo
Zur Seite of 24
USER’S MANUAL Model No. WLTL29712.0 Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc - tions in this manual before using this equipment.
2 WESLO is a registered trademark of ICON IP, Inc. This drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front cover of this manual and request a free replacement decal. Apply the decal in the location shown.
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with pre-existing health problems.
4 20. The heart rate monitor is not a medical device. V arious factors, including the user’s movement, may affect the accuracy of heart rate readings. The heart rate monitor is intended only as an exercise aid in determin- ing heart rate trends in general.
5 Thank you for selecting the new WESLO ® CADENCE R 5.2 treadmill. The CADENCE R 5.2 tre adm ill off ers a selection of features designed to make your workouts at home more effective. And when you’re not exercis- ing, the unique treadmill can be folded up, requiring less than half the floor space of other treadmills.
6 1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Unfold the Frame (50) away from the Upright (73). Do not lean on the Upright. Orient the Base (80) as shown. Attach the Base to the Upright (73) with four M10 x 65mm Screws (1).
7 2. Attach the Handrails (69) to the Upright (73) with four M10 x 45mm Screws (2). Start all four Screws, and then tighten them. 3. With the help of a second person, hold the con- sole assembly near the Upright (73). Remove the tie from the Upright Wire (71).
8 6. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 17 and 18). To protect the floor or carpet, place a mat under the treadmill.
9 OPERA TION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD Use a Surge Suppressor Y our treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your home’s power . V oltage surges, spikes, and noise interfer- ence can result from weather conditions or from other appliances being turned on or off.
10 ETWL29609 (WL TL29609) FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. When you select the manual mode of the console, you can change the speed of the treadmill with the touch of a button.
11 HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components.
12 4. Follow your progress with the displays. The track —The track represents a distance of 1/4 mile (400 m). As you walk or run on the treadmill, the indicators around the track will appear in succession until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession.
13 HOW TO USE A PRESET WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. 2. Select a preset workout. To select a preset workout, press the Weight Loss Workouts button or the Intensity Training Workouts button repeatedly until the number of the desired workout appears in the display.
14 THE INFORMATION MODE The console features an information mode that allows you to turn on and turn off the demo mode and to select miles or kilometers as the unit of measurement.
15 HOW TO FOLD THE TREADMILL Before folding the treadmill, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow below.
16 Most treadmill problems can be solved by follow- ing the simple steps below . Find the symptom that applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual.
17 Remove the five indicated M4.2 x 19mm Washer Head Screws (9). Then, carefully remove the Motor Hood (56). Locate the Reed Switch (42) and the Magnet (44) on the left side of the Pulley (46). Turn the Pulley until the Magnet is aligned with the Reed Switch.
18 SYMPTOM: The walking belt is off-center or slips when walked on a. If the walking belt is off-center , first remove the key and UNPLUG THE POWER CORD.
19 EXERCISE GUIDELINES These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results.
20 Key No. Qty . Description Key No. Qty . Description 1 4 M10 x 65mm Screw 2 4 M10 x 45mm Screw 3 17 M4.2 x 19mm Screw 4 2 M8 x 35mm Screw 5 18 M4.2 x 13mm W asher Head Screw 6 6 M4.2 x 13mm Screw 7 1 M4.2 x 13mm T ek Screw 8 4 M4.2 x 19mm T ek Screw 9 5 M4.
21 35 48 50 37 41 13 44 42 7 43 41 38 30 30 16 45 46 47 13 36 29 12 3 4 54 23 3 14 55 4 23 12 12 12 5 5 5 24 31 29 5 51 49 40 3 3 40 29 53 19 52 3 5 5 5 5 5 5 5 5 5 10 21 5 24 25 25 25 25 25 25 25 25 25 26 26 26 26 25 29 34 34 19 14 82 21 82 39 3 EXPLODED DRA WING A Model No.
22 17 22 29 58 17 15 57 22 64 56 33 33 33 59 1 1 23 23 1 1 1 1 1 1 60 65 61 62 63 9 9 66 9 9 9 1 1 63 EXPLODED DRA WING B Model No. WL TL29712.0 R0712A.
23 76 73 76 79 18 71 1 81 27 28 20 27 28 20 8 8 78 32 78 8 78 79 32 18 8 78 69 68 71 68 69 3 68 75 3 77 77 2 2 68 67 6 6 6 6 70 74 80 3 3 3 3 1 83 72 84 EXPLODED DRA WING C Model No.
Part No. 335962 R0712A Printed in USA © 2012 ICON IP , Inc. ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and material, under normal use and service conditions. The drive motor is warranted for one (1) year from the date of purchase.
Ein wichtiger Punkt beim Kauf des Geräts Weslo WLTL29712.0 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Weslo WLTL29712.0 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Weslo WLTL29712.0 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Weslo WLTL29712.0 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Weslo WLTL29712.0 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Weslo WLTL29712.0 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Weslo WLTL29712.0 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Weslo WLTL29712.0. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Weslo WLTL29712.0 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
