Benutzeranleitung / Produktwartung Cadence 80 des Produzenten Weslo
Zur Seite of 24
USER'S MANUAL Serial Number Decal Model No. 30551.1 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: To reduce the risk of serious injury, read all important precautions and in- s tructions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
4 2 0. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6 and HOW TO FOLD AND MOVE THE TREADMILL on page 15.) Y ou must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.
5 Thank you for selecting the WESLO ® CADENCE 80 treadmill. The CADENCE 80 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellent form o f cardiovascular exercise in t he convenience and privacy of y our h ome.
ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. N ote: The und ersi de o f th e tre admi ll w alki ng b elt is coated with high-performance lubricant.
1. Make sure that the power cord is unplugged. H ave a second person hold the B ase (5 2) in th e position shown. Attach six Base Pads (63) (three are shown) to the Base (52) with six Base Pad Screws (26). Identify the Left Upright (53), which has two small holes near the upper end.
8 3. Have a second person lift and hold the front end of th e F ram e ( 51 ). Hold a Frame Spacer (11) be- t ween the Right Upright (54) and the F rame. Attach the Right Upright to the Frame with a F rame Pivot Bolt (1), an Upright Washer (14), and an Upright Star Washer (9).
9 7. Attach the Console Back (73) to the Console Assembly (91) with four Console Back Screws (4). Make sure that no wires are pinched. 7 73 4 4 91 6. Set the Left and Right Handrails (22, 33) and the Console Assembly (91) on the Uprights (53, 54).
11. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place. The hex key is used to adjust the walking belt (see page 18). To protect the floor or carpet, place a mat under the treadmill.
OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
12 HOW TO TURN ON THE POWER IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
HOW TO OPERATE THE CONSOLE 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 12. 2. Press the Start button or the Speed increase button to start the walking belt. When either button is pressed, the walking bel t w ill begin to move at 1 mph.
14 Incline Legs Incline Pin I ncline Pin HOW TO CHANGE THE INCLINE OF THE TREAD- MILL To vary the intensity of your exercise, you can change the incline of the treadmill. There are three incline lev- els. Before changing the incline, remove the key a nd unplug the power cord.
15 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE U nplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right.
16 HOW TO LOWER THE TREADMILL FOR USE 1 . Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, release the latch knob.
17 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
18 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 11. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
19 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
P ART LIST – Model No. 30551.0 R 0607A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 2 Frame Pivot Bolt 2 4 Upright Bolt 3 1 Tie Holder Screw 4 4 Console Back Screw 5 .
21 EXPLODED DRA WING A – Model No. 30551.0 R 0607A 93 17 81 86 51 76 67 28 62 89 21 83 93 6 45 45 31 46 25 25 25 25 25 25 25 56 25 71 68 28 18 46 69 13 32 46 43 43 69 13 46 32 43 43 27 29 95 74 61 1.
EXPLODED DRA WING B – Model No. 30551.0 R 0607A 66 84 20 20 20 37 85 34 38 44 79 34 30 59 38 57 87 95 95 92 23 40 42 42 42 95 88 97 21 65 47 47 47 20 20 90 97 22.
EXPLODED DRA WING C – Model No. 30551.0 R 0607A 80 XX 15 54 11 53 14 1 9 39 1 11 14 9 77 7 48 39 10 91 82 21 2 26 63 63 26 63 26 75 70 16 35 35 16 70 75 10 73 4 4 4 4 3 82 63 26 63 26 26 63 2 12 33 .
ORDERING REPLACEMENT P ARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the.
Ein wichtiger Punkt beim Kauf des Geräts Weslo Cadence 80 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Weslo Cadence 80 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Weslo Cadence 80 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Weslo Cadence 80 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Weslo Cadence 80 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Weslo Cadence 80 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Weslo Cadence 80 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Weslo Cadence 80. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Weslo Cadence 80 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
