Benutzeranleitung / Produktwartung K2726 des Produzenten Unitech
Zur Seite of 55
Manual K2724 (-B), K2724S, K272U (-B), K2726 (-B) Multi function Keyboard Magnetic Stripe Card Reader/ Bar Code Slot Reader & built-in Bar Code Decoder for IBM or compatible computers Date: March 2001 V ersion: 2.
Preface General Advice Improp er handling, storage, external influences and /or further processing can lead to disturbances and defects during use. This is also especially valid if trained personnel do not perform repairs and maintenance work. We reserve the right to make any technical alterations to in accordance with technological advancements.
Contents 1. Overview Page 1 1.1. Ports and Input Device 2 1.2. Decoding Capability 2 1.2.1. Bar Code 2 1.2.2. Magnetic Stripe 3 1.3. Scanning Mode 3 1.4. Setup 4 2. Understanding the Operation Parameters 4 2.1. Intercharacter Delay 4 2.2. Function Code 5 2.
T ypical Applications * Point-of-sale system * Banking, financial, and insurance data input * ID entry and security * Industrial control and automated process applications * Inventory control * Shippi.
1.1 Ports and Input Device The keyboard has two input ports to accept a variety of input devices: A port with DB-9 squeeze release type connector at the upper-right hand side of the keyboard supports barcode scanner input. W and, CCD, or Laser scanners are supported.
* China Postal Code (Toshiba Code). * Codabar. * UCC/EAN128 * Code 32 (Italian pharmacy). * Code 93. * Code 128. * Label Code IV and V * Delta Distance Code.
1.4. Setup There are several ways to configure the Keyboard to fit the user’s requirements: * Keyboard: (Setup Magnetic Stripe Reader) Setup via any text editor, such as Notepad or W ordPad under Microsoft Windows environment. Keyboard setup provides and interactive way to set up the keyboard’s magnetic stripe reader through screen prompting.
2.2. Function Code The keyboard can emulate special keys, such as function k eys and cursor keys, by scanning pre - defined bar code labels - which can be found in Appendix A. Print these bar code labels by printing their corresponding Code 39 characters (in brackets).
Code 39 M Codabar N Code 93 L Code 128 K UCC/EAN128 ]C1 MSI O Code 32 T Delta Code D Pressey Code P Label Code I V , V B China Postal Code C Track I None Track II None Track I II None 2.
multiple labels, and the scanner will continue to read until the trigger is released. This is useful to users that prefer multiple inputs during scanning. * One Press, One Scan: With this feature enabled, pressing the scanner’s trigger causes the scanner to remain on until a successful input.
Program the Output Sequence as: 1<CR>2,3<CR>5/4<CR> Here <CR> is hexadecim al 0D if the bar code menu is used for setup. Scan CR from full ASCII chart to get this character. Or press Ctrl - M if you use keyboard setup. The last <CR> will not be necessary if Terminator is set to Enter.
Label content: 01234567890123 CLSI format: 0 1234 56789 0123 2.11. Zero Expansion of UPC - E When selected, UPC - E will be converted to U PC - A format. 2.12. Bookland EAN (ISBN): When enabled, the EAN - 13 with “978” as first three digits will be converted to ISBN format.
power - up. After 10 keys (other than Shift keys) are pressed, setup will not be activated except by a system restart or by simply unplugging and re - plugging the keyboard connector on your com puter. During setup, only Numeric keys (0 to 9) on the top row of keyboard are accepted; Numeric keypad on the right of keyboard is not supported.
* Scan Exit to end setup 3.2.3. Code ID Setting (example) The following example shows how to set Code 93 with ID O and Code 128 without ID * Scan Enter Group 3 * Scan D2 to select Code ID * Scan 1 for.
* Scan 4 for expiration Year * Scan CR from Full ASCII table for <Enter> * Scan PP to end output sequence setting * Scan “Exit: to end setup 3.3. Data E diting The purpose of Data Edit is to enable you to define and modify a data record that results from the decoding of a bar code.
Formular Qualifier Modifier Input ID [Length] [Match] Input ID [Length] [Match] [Match] [Match] ... A - String: String to be added. O - String: Modified original data.
Review T o view the formulas programmed in the W edge. By scanning this label during a formula input (prior to sca nning “ Enter” and thereby finishing ), the current formula will be displayed. Otherwise, all programmed formulas will be displayed.
Here * and # are wild characters on the setup sheet. Qualifier There are three conditional fields in the Qualifier: Input ID, Length and Match Input ID Format: IN_ID , ID1 , ... , IDi , Input ID is required and the original data record must correspond to Input ID of a formula in order to be processed.
maximum length (Max). When defined, a formula will be performed if the length of the original data falls between MIN and MAX. When missing, the fo llowing fields of current Formula are always processed. Example: LEN , 9 , 48 , means the length of original data must be within 9 and 48.
followed at position 10. Modifier Modifier has two types of fields: A - Str ing and O - String to define the output contents. A - String Format: " abc... " 'a', 'b' and 'c' in the string can be any character. A - String defines a string of characters to be added to the output.
Examples Example 1 If the original data is Code 39 and content is "AA", output "ABC Company", and otherwise output the original data as it is.
-- From the position next to 'i', search for k. -- If above searches are all found, the result of the parameter will be the position wher e 'k' is located. If N is a string, the position evaluation of N is the same as P except that the searching position starts from P+1.
The output of above input will be ABEL,STEVE[CR] 012345678901234[CR] 9001[CR] 3.4. Batch Setup Having configured a keyboard, you may duplicate the settings of the keyboard (master) to th e others. Y ou can do this by producing a set of custom setup labels derived from the master keyboard and scanning these labels from other keyboards.
3.5. Scanner Configuration Manager Software Scanner Configurat ion Manager is a utility program to configure scanner settings on a computer using the Windows 95/98 operating system. Use the program to define the settings and then download the parameters to the scanner.
Pin Number Signa l 1 Start Of Scan 2 Data 3 Good Read 4 N/C 5 Switch Detect 6 Power Control 7 GND 8 VCC 6. Specification Keyboard Interface Enhanced AT , PS/2 keyboard 5 - pin DIN / 6 - pin mini DIN male coiled cable Power V oltage: 5 VDC +/ - 5% Current: 250mA (including magnetic stripe reader) Dimension (LxWxH) 400x210x43 mm (15.
Bit Density Reads 75 to 210 BPI Reliability 300000 passes in a clean environment (minimum) Bar Code Decoder Unit Connector DB - 9 male type Interface TTL Symbologies Code 39 Standard and Full ASCII, U.
Page A. 1 Appendix A. Function Codes Function Codes for PC F1 (%VA) F3 (%VC) F5 (%VE) F7 (%VG) F9 (%VI) F11 (%VK) Cursor Right (/FC) Cursor Up (/FE) Pg Up (/FG) TAB (/FI) Esc (/FK) Right Ctrl (/FO) Sh.
Page B. 1 Appendix B. Setup Menu B.1 Beeps and Delays Enter Group 1 Group Default 0 1 2 3 4 5 6 7 8 9 Beep Tone: 0 -- None 1 -- Low 2 -- Medium 3 -- High 4 -- Low to High 5 -- High to Low Interblock D.
Page B. 2 B.2 Keyboard Interface: Ente r Group 2 Group Default 0 1 2 3 4 5 6 7 8 9 Function Code: 0 -- Off 1 -- ON Caps - Lock: 0 – Auto Trace(PC/XT,AT) 1 – Lower Case 2 – Upper Case Language (For PC /XT/AT): 0 - U.S. 5 - Norwegian : - Danish 1 - U.
Page B. 3 B.3 Scanner Port: Enter Group 3 Group Default 0 1 2 3 4 5 6 7 8 9 Terminator: 0 — Enter 1 — Return (on digits keypad) 2 — Field Exit or Right Ctrl 3 — None D 1 Code ID: 0 – disable 1 – Enable Note: This setting doesn’t affect EAN128 Code ID.
Page B. 4 B.4 Magnetic Reader Enter Group 4 Group Default 0 1 2 3 4 5 6 7 8 9 Terminator 0 — Enter 1 — Return (on digits keypad) 2 — Field Exit or Right Ctrl 3 — None E 1 Start/Stop Sentinel 0.
Page B. 5 B.5 Code 39 / I 2 of 5 / S 2 of 5 / Code 32 / EAN128 Enter Group 5 Group Default 0 1 2 3 4 5 6 7 8 9 Code 39: 0/ 1 -- Disable/ Enable. 2/ 3 -- Full ASCII / Standard. 4 -- Check Digit (CD) Calculate & Send. 5 -- CD Calculate, not send. 6 -- CD not Calculate.
Page B. 6 B.6 Code 12 8 / MSI Code / Code 93 / Codabar/ Label Code: Enter Group 6 Group Default 0 1 2 3 4 5 6 7 8 9 Code 128: 0/ 1 -- Disable/ Enable 1 - 64 -- Min Length 1 / Max Length 64 MSI /Please.
Page B. 7 B.7 UPC / EAN / Delta Code Enter Group 7 Group Default 0 1 2 3 4 5 6 7 8 9 UPC - A: 0/ 1 -- Disable/ Enable 2 /3 -- Leading Digit Send / No Send 4 /5 -- Check Digit Send / No Send UPC - E: 0.
Page B. 8 B.8 Data Editing: Enter Group 8 Group Default 0 1 2 3 4 5 6 7 8 9 + - Review IN_ID LEN MATCH O - STR “ * # Enter Backspace , Exit Code Type: 0 -- Code 39 Full 12 -- EAN 128 1 -- Code 39 Std.
Page C. 1 Appendix C. Full ASCII Chart (Characters in parentheses represent Code 39 bar code printing) NUL (%U) SOH ($A) STX ($B) ETX ($C) EOT ($D) ENQ ($E) ACK ($F) BEL ($G) BS ($H) HT ($I) LF ($J) V.
Page C. 2 RS (%D) US (%E) SP ! (/A) ” (/B) # (/C) $ % & (/F) ’ (/G) ( (/H) ) (/I) * (/J) + , (/L) - . / 0 1 2 3 4 5 6 7 8 9 : (/Z) ; (%F) < (%G) = (%H) > (%I).
Page C. 3 ? (%J) @ (%V) A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ (%K) (%L) ] (%M) ^ (%N) _ (%O).
Page C. 4 ` (%W) a (+A) b (+B) c (+C) d (+D) e (+E) f (+F) g (+G) h (+H) i (+I) j (+J) k (+K) l (+L) m (+M) n (+N) o (+O) p (+P) q (+Q) r (+R) s (+S) t (+T) u (+U) v (+V) w (+W) x (+X) y (+Y) z (+Z) {.
Page D . 1 Appendix D. Bar Code Test Chart EAN - 13 3 0 4 5 2 1 4 8 3 4 1 2 3 EAN - 8 8 0 1 2 3 4 5 3 UPC - A UPC - E 0 2 1 2 3 4 5 7 9 9 ISBN 957 - 630 - 239 - 0 9 7 8 9 5 7 6 3 0 2 3 9 8 0 7 2 0 0 I.
.
.
THINITY WIRELESS ENTERTAINMENT KEYBOARD – NÁVOD NA POUŽÍ VANIE 2 SK Používanie klávesnice Nastavenia rozlo ženia klávesnice v systéme Windows by mali zod poveda ť rozloženiu vašej klávesnice Trust. Rozloženie klávesnice Trust je vyz na č ené na samolepke na balení.
THINITY WIRELESS ENTERTAINMENT KEYBOARD – NÁVOD NA POUŽÍ VANIE 3 SK Používanie klávesnice Thinity s multimediálnym prehráva č om Klávesnica Thinity má multimediálne klá vesové skratky, ktoré pomáhajú ovláda ť ob ľ úbený multimediálny prehráva č .
.
THINITY WIRELESS ENTERTAINMENT KEYBOARD - FELHASZNÁLÓI KÉZIKÖNYV 2 HU A billenty ű zet használata A billenty ű zet Windows operációs re ndszeren belüli nyelvi beállítá sának egyeznie kell a Trust billenty ű zet billenty ű zetkiosztásáva l.
.
THINITY WIRELESS ENTERTAINMEN T KEYBOARD - MANUAL DE UTILIZARE 1 RO Con ţ inut pachet 1 a Sec ţ iune tastat ur ă b Indicatoare comenzi rapide c Indicator transmisie ( ), Indicator alime ntare ( ), .
.
.
THINITY WIRELESS ENTERTAIN MENT KEYBOARD - РЪКОВОДСТВО ЗА ПОТРЕБИТЕЛЯ 1 BG Съдържание на опаковката 1 a Раздел " Клавиат ура " b.
THINITY WIRELESS ENTERTAIN MENT KEYBOARD - РЪКОВОДСТВО ЗА ПОТРЕБИТЕЛЯ 2 BG Използване на клавиатурата Настройката за държавата н.
THINITY WIRELESS ENTERTAIN MENT KEYBOARD - РЪКОВОДСТВО ЗА ПОТРЕБИТЕЛЯ 3 BG Използване на тъчпада 9 С преместван е на един пръст по повърхността на тъчпада можете да движите курсора на мишката .
THINITY WIRELESS ENTERTAIN MENT KEYBOARD – РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ 1 RU Содержимое упаковки 1 a Секция клавиш b Индикаторы быстр.
THINITY WIRELESS ENTERTAIN MENT KEYBOARD – РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ 2 RU Использование клавиатуры Настройк и раскладки клавиат.
Ein wichtiger Punkt beim Kauf des Geräts Unitech K2726 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Unitech K2726 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Unitech K2726 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Unitech K2726 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Unitech K2726 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Unitech K2726 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Unitech K2726 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Unitech K2726. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Unitech K2726 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
