Benutzeranleitung / Produktwartung AS Pro des Produzenten Alphasmart
Zur Seite of 23
Owner ’ s Manual Intelligent Peripheral Devices, Inc. 20380 T own Center Lane, Suite 270 Cupertino, CA 95014 Phone: (408) 252-9400 Fax: (408) 252-9409 E-mail: info@alphasmart.
■ T ABLE OF CONTENTS W arranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Inside Cover System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Quick Start . . . . . . . . . . . . . . . . . . . . . . . . .
Step One—Using AlphaSmart • T urn on the AlphaSmart and start typing. Y our text will appear in the window . • Use the arrow keys to move your cursor in the text. • Use the Delete key to erase. Step T wo—T ransferring T ext to a Computer • T urn on the Macintosh or PC • Start up your word processing application and open a new file.
As with any word processing application, the text will auto- matically wrap at the end of each line, so you should use the Return key only to separate paragraphs. All text formatting, including margins, tab stops, font, size, and other styling attributes, are done on the desktop com- puter after the file has been transferred from the AlphaSmart.
Note: If the file was deleted using the Option- x -Clear File com- mand, the data is not recoverable. ■ INST ALLING THE MAC “Y” CABLE Y ou may use any Apple Desktop Bus (ADB) cable to transfer data from the AlphaSmart to the Macintosh—no special cable is usually needed.
■ SENDING TEXT TO A MACINTOSH One of the connectors on the right side of the AlphaSmart is the PC port and the other is the Mac ADB port. (If you need two ADB ports, use the Y cable to provide the other ADB port.) The IBM compatible port is labeled “ PC ” and the Macintosh ADB port is labeled “ Mac/IIGS .
The reason for this is that the return causes most spread- sheets to drop straight down a row , instead of going back to the left-most column of the spreadsheet. An easy trick to fix this is to send your text to a word proces- sor , copy it, then paste it into your spreadsheet.
Dual cable allows an AlphaSmart to be attached to either a 5-pin or 6-pin PC. As shown in Figure 3, one end of the PC Dual cable connects to the PC and one end connects to the AlphaSmart.
When your AlphaSmart is attached to a PC, it changes modes and the screen displays the following message: Attached to PC, emulating keyboard. Press Send Key to transfer file. If you do not see this message, check your cable and make sure it is attached properly to the PC.
• Open your PC application and transfer the file as normal. • When finished, turn off the PC, connect your normal key- board and turn your PC back on. Important: The AlphaSmart must be turned on before the PC in order for the PC to boot when it is attached as the PC keyboard.
■ ALPHASMART FIND FEA TURE T o access the AlphaSmart Find feature, press x -F . Y ou will see a screen that says: Find:_________ Press Return to search in file 1, option-Return to search in all files, CMD-A to Find again, Esc to exit. At the cursor , you may enter up to 16 characters.
• Choosing 3 sets the keyboard layout for right-hand only , and selecting 4 sets the keyboard for left-hand only . Right and left one-handed layouts enable faster typing for peo- ple with disabilities (see Figures 8 and 9).
machine running Windows, international characters are sent using the codes defined in the Character Map Accessory . International characters work directly with the following Windows applications: • .
Figure 10. Example shows modify indicators in the lower right corner of the screen Figure 11 shows just the control and shift keys down. Figure 1 1. Example shows the control and shift modify indicato.
If eight different students are to share an AlphaSmart, instruct each student to set their own private password for their own file. T ell them to use “smart” as the old password. T o change a file’ s password 1. T urn the AlphaSmart on and make sure it is NOT connect- ed to a computer .
500–cycle lifetime if fully discharged and charged, but have over a 1,000–cycle lifetime if the discharge/charge cycles are less than 50% of capacity .) The memory effect will also be avoided if the length of the discharges is somewhat random. Complete charging of a discharged battery pack takes 16 hours.
3. Remove the AA batteries and make sure the unit is not plugged into the AC adapter or attached to a Macintosh. 4. W ait two minutes. 5. Replace AA batteries or plug into an AC adapter . 6. T urn the unit back on. If the text you entered is still there, then the lithium battery is still good.
others. (ClarisW orks allows faster sends than MS W orks and MS W ord.) • Adjust the keyboard control panel in the Macintosh system to a faster speed to maximize the file transfer speed. • If the characters transferred are the wrong characters, e.
eight different files. T o change files, press F1 to go to File 1, F2 to go to File 2, and so on. I try to type into a file, but no characters show up. • If the file looks empty , press the Clear File key to make sure the file is erased. Then try typing again.
AlphaSmart caps lock key once to fix it, and then type a few keys to verify that it is now correct. ■ FREQUENTL Y ASKED QUESTIONS How can I change the transfer speed? When disconnected from the computer , press Option- x -S and change the speed as desired.
■ RETURN PROCEDURES When you have a problem with your AlphaSmart, please do the following: 1. Read the T roubleshooting and Frequently Asked Questions sections in this manual. If this doesn’t solve your problems, 2. Call the business which sold you the AlphaSmart, e-mail IPD at support@alphasmart.
NiCad Rechargeable Battery Pack This pack eliminates the need to buy batteries. It is installed in the battery compartment and replaces the two AA batter- ies. With normal use, you will need to recharge the battery pack only once a week, using the AC adapter described above.
AlphaSmart Pro 43 ■ GET UTILITY SOFTW ARE AlphaSmart Get Utility is software that allows you to transfer text from your Mac or Windows/W indows 95 PC to your AlphaSmart. Whatever is on the PC or Mac Clipboard can be transferred to any file on the AlphaSmart.
Ein wichtiger Punkt beim Kauf des Geräts Alphasmart AS Pro (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alphasmart AS Pro noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alphasmart AS Pro - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alphasmart AS Pro reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alphasmart AS Pro erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alphasmart AS Pro besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alphasmart AS Pro verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alphasmart AS Pro. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alphasmart AS Pro gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
