Benutzeranleitung / Produktwartung LCD-1700VRQ des Produzenten Tote Vision
Zur Seite of 21
.
.
17” Quad display LCD monitor ______________________ 1 CHAPT ER 1 I NTRODUCTION BEFORE INSTALLING YO UR MONITOR READ THIS MANUAL COV ER TO COVER. PAY ATTENTION to all WARNING and CAUTIONS DO NOT use computer components not recommend by the manufacture Do not attempt to service the monitor your self.
________________________ 17” Qua d display LCD monitor 2 FACTORY - PRESET MODES Table 1 shows standard video mode setting that have been pre - adjusted at the factory for accurate video display. These setting are stored in the monitor's memory Table 1.
17” Quad display LCD monitor ______________________ 3 S PECIFICATIONS l LCD - 1700VR Q 17” LCD Monitor Overall Dimension (HxWxD): 483 x 354 x 50.3 mm Shipping Weight (G/W): 9 Kg Effective Display area (H/V): 337.92 x 270.34 mm Display colors: 16.7M colors Scan Frequencies: Horizontal 31.
________________________ 17” Qua d display LCD monitor 4 Compatibility: IBM and compatibl e, Apple Macintosh, NEC Environmental Limits: Operating Temp 32 ° to 104 ° F ( 0 ° to 40 ° C ) Storage Temp.
17” Quad display LCD monitor ______________________ 5 Chapter 2 P RODUCT P ACKAGE Open the shipping carton and check the contents. If any items are missing or damaged, contact your dealer immediately. The package should include the following items l 8U 17” Color TF T LCD Monitor l Accessory Box: 1.
________________________ 17” Qua d display LCD monitor 6 FOLLOW THESE STEPS T O INSTALL THE MONITOR 1. Before you connect the cables, make sure that the monitor and the system unit power switches are OFF 2. Plug one end of the 15pin signal cable to the monitor and the other end to the video signal connector at the rear of the system.
17” Quad display LCD monitor ______________________ 7 C ONTROL F UNCTIONS The OSD control functions of 17” Quad display LCD monitor are located on the lower side.
________________________ 17” Qua d display LCD monitor 8 Chapter 3 A DJUSTING THE PC MONITOR The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to the possible deviations between these video adapters, you may make some adjustment to fit the monitor for adapter used.
17” Quad display LCD monitor ______________________ 9 We had two pages OSD screens; the screens are shown in OSD screen 1 and 2, if you choose the source to video not RGB, please see the next chapter.
________________________ 17” Qua d display LCD monitor 10 OSD SCREEN2 1024x768 48KHz 60Hz PREVIOUS PAGE --- Z Brightness -------------- L RED -------------- R GREEN ---------- G BLUE ---------.
17” Quad display LCD monitor ______________________ 11 Adjustment Icon : S Auto - adjustment Automatically adjust the pixel clock, H/V position and fine tune the screen to get bette r visual quality. @ H - position Adjusts the screen's width.
________________________ 17” Qua d display LCD monitor 12 F OSD V - position Change the OSD Vertical Display location in the screen Y Move to the next OSD screen Z Move to the previous OSD screen [ OSD transparency setting To set the OSD display transparency mode.
17” Quad display LCD monitor ______________________ 13 BRIGHTNESS ADJUSTMEN T 1. Use the ∇ & ∆ key to move the 3 to the L icon, then press ﹣ & + to get the best brightness optimization. Note : We provide another easily method to do the brightness adjustment.
________________________ 17” Qua d display LCD monitor 14 HOW TO RESTORE THE P RE - DEFINE VALUE R estore your previous define setting 1. Use the ∇ & ∆ key to move the 3 t o t h e icon, then press “ - ” will automatically load the pre - define value for each item.
17” Quad display LCD monitor ______________________ 15 CHAPTER 4 ADJUSTING THE SECURI TY SCREEN SETTING The LCD monitor is designed to work with a range of compatible video display on the market. Due to the possible deviations between these video source, you may make some adjustment to fit the monitor for video usage.
________________________ 17” Qua d display LCD monitor 16 Security OSD menu setting When your screen is in AV mode, pressing MENU key to enter into OSD set up menu, you will see the following screen.
17” Quad display LCD monitor ______________________ 17 The sub - menu of camera is below CAMERA SETUP CAMERA CAM1 BRIGHTENSS 10 CONTRAST 22 SHARPNESS 55 SAT U 99 SAT V 82 HUE 01 LOAD DEFAULT You can set up each camera brightness, contrast, sharpness, sat U, Sat V and hue setting to the better visual quality.
________________________ 17” Qua d display LCD monitor 18 P r e ss i ng t o l e t sc r een t o d i s p l a y 4 c hanne l quad d i s p l a y . X Recording the screen will always set as quad display, When you playback the screen, we offered one hot key to let user to see the full channel # display.
17” Quad display LCD monitor ______________________ 19 APPENDIX S IGNAL C ONNECTOR P IN - OUT Power Connector Pin 1 Ground Pin 2 +12V output RGB SIGNAL CONNECT OR Pin 1 Analog Red Input Pin 2 Analog.
Ein wichtiger Punkt beim Kauf des Geräts Tote Vision LCD-1700VRQ (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tote Vision LCD-1700VRQ noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tote Vision LCD-1700VRQ - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tote Vision LCD-1700VRQ reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tote Vision LCD-1700VRQ erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tote Vision LCD-1700VRQ besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tote Vision LCD-1700VRQ verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tote Vision LCD-1700VRQ. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tote Vision LCD-1700VRQ gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.