Benutzeranleitung / Produktwartung CX3400 des Produzenten Behringer
Zur Seite of 22
1 SUPER-X ® PRO CX3400 www.behringer.de Version 1.0 December 1999 Users Manual ENGLISH.
2 acc. to the Directives 89/336/EWG and 73/23/EWG We, BEHRINGER INTERNA TIONAL GmbH Hanns-Martin-Schleyer-Straße 4 D - 47877 Willich Name and address of the manufacturer or the introducer of the prod.
3 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
4 SUPERX ® PRO HIGH-PRECISION STEREO 2-WAY / 3-WAY / MONO 4-WAY CROSSOVER WITH LIMITERS MODEL CX 3400 s Professional high-precision stereo 2-way / 3-way / mono 4-way crossover s World-class perfor.
5 FOREWORD Dear Customer, Welcome to the team of SUPER-XPRO users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this crossover.
6 T ABLE OF CONTENTS 1. INTRODUCTION ................................................................................................................. ..... 7 1.1 Multi-way speaker systems ..............................................................
7 1 . INTRODUCTION Thank you very much for expressing your confidence in BEHRINGER products by purchasing the SUPER-X PRO CX3400. + This manual first describes the terminology used, so that you can fully understand the CX3400 and its functions. Please read the manual carefully and keep it for future reference.
8 2.1 Before you begin Your BEHRINGER SUPER-X PRO CX3400 was carefully packed in the factory and the packaging is designed to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred during transit.
9 Fig. 2.2: Proper selection of the two MODE buttons for stereo 2-way operation Subsequently, the LEDs above the active controls on the front panel light up, signaling which controls are active in the operating mode you just selected. The functions of these controls can be seen from the second strip label.
10 Fig. 2.4: Active control element s on the rear panel of the SUPER-X PRO 1 Use the enclosed power cord to connect the unit to the mains. 2 FUSE HOLDER / VOLTAGE SELECTOR . Please make sure that your local voltage matches the voltage indicated on the unit, before you attempt to connect and operate the CX3400.
11 Fig. 2.6: Active control elements on the front panel of the SUPER-X PRO 1 and 16 INPUT control . This control adjusts the input gain from +12 to -12 dB. 2 LOW CUT button . This button activates the 25-Hz high-pass filter protecting the woofers against low- frequency signals.
12 + Always switch off the entire system before you press this button, as it produces heavy interference noise that could damage your speakers and/or other equipment.
13 6 LOW OUTPUT control . Controls the output level of the Low band from +6 to -6 dB. 7 LOW PHASE INVERT button . This button reverses the polarity of the Low output. 8 LOW MUTE button . Mutes the Low band. 9 LOW-MID OUTPUT control . Controls the output level of the Low-Mid band from +6 to -6 dB.
14 3. APPLICATION 3.1 Tools The following tools are indispensable for a perfect system alignment. You should by all means try to obtain the speaker specifications from the manufacturer, in order to operate the systems in their proper frequency and level ranges.
15 3.3.1 Finding drop-outs in the frequency response Check the entire frequency response of the system. Rooms have quite an impact on the frequency response of speaker systems, due to resonance and various reflections. So, you cannot expect to achieve a linear frequency response right from the start.
16 3.5.2 Basics of electronic runtime correction It is important to know how the dimensions of time and space are connected with each other, e.g. by using a tape measure and a pocket calculator. Example: a delay of 2 ms corresponds to a distance of 68.
17 Modern systems often use bass reflex cabinets for their woofer or sub-woofer systems. Consequently, when stacking the cabinets, the drivers are usually aligned along the vertical axis of the speaker front, or can at least be aligned using the available control range of the SUPER-X PRO.
18 The limiter threshold can be set from -6 dB to OFF and acts on all six limiters at the same time. Still, each limiter band works independently, with the LIM-LEDs lighting up as soon as the associated limiter is activated. + Please note that the limiters in the SUPER-X PRO are no hard ratio limiters, i.
19 4.2 Mains connection Before you connect your SUPER-X PRO to the mains, please make sure that your local voltage matches the voltage required by the unit! The fuse holder on the female mains connector has 3 triangular markers, with two of these triangles opposing each other.
20 Fig. 8.3: Different plug types 5. SPECIFICATIONS INPUT Connectors X L R T yp e Electronically servo-balanced, RF filtered Impedance Balanced >50k Ohms, unbalanced >25k Ohms Max.
21 PERFORMANCE Bandwidth 20 Hz t o 2 0 kHz, +0/-0.5 dB Frequency Response <5 Hz to >90 kHz, +0/-3 dB Signal to Noise Ref.: +4 dBu, 20 Hz to 20 kHz, unweighted Stereo Mode: Mono Mode: Low Output .
22 The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER GmbH.
Ein wichtiger Punkt beim Kauf des Geräts Behringer CX3400 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Behringer CX3400 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Behringer CX3400 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Behringer CX3400 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Behringer CX3400 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Behringer CX3400 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Behringer CX3400 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Behringer CX3400. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Behringer CX3400 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
