Benutzeranleitung / Produktwartung M300 des Produzenten Toshiba
Zur Seite of 220
T OSHIBA Satellite M300/M300D/ L310/L310D Satellite Pro M300/M300D/ L310/L310D Port able Personal Computer User's Manual.
ii User ’s Manual Copyright © 2008 by TOSHIBA Corporation. All ri ghts reserved. Under the copyright laws, this manual cannot be repr oduced in any form without the prior written permission of TOSHIBA. No pat ent liability is assumed, with respect to the use of the information contained herein.
User ’s Manual iii T r ademar ks Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United S tates and/or other countries. DirectX, AcriveDesktop, Dire ctShow , and Windows Media are registered trademarks of Microsoft Corporation.
iv User ’s Manual W hen Using Y our Computer ■ Do not attempt to service the computer yourself. Always follow installation instructions closely . ■ Do not carry a battery in your pocket, purse, or other container where metal objects (such as car keys) could short-circuit the battery terminals.
User ’s Manual v FCC infor mation FCC notice “Dec laration of Confor mity Infor mation” This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to part 15 of the FCC rules.
vi User ’s Manual BSMI notice (T aiwan only) EU Dec laration of Conf or mity TOSHIBA declares that this product conforms to the following S tandards: This product is carrying the CE-Mark in accordance with the rela ted European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany .
User ’s Manual vii Modem war ning notice Confor mity Sta tement The equipment has been approved to [Council De cision 98/482/EC - "TBR 21"] for pan-European single terminal connection to the Public Switch ed T elephone Network (PSTN).
viii User ’s Manual J a pan re gulations R e gion selection If you are using the computer in Jap an, technical regul ations described in the T elecommunications Business Law r equire that you select the Japan region mode . It is illegal to use th e modem in Japa n with any other selection.
User ’s Manual ix T elephone company procedures The goal of the telephone co mpany is to provide you with the best service it can. In order to do this, it may occasionally be ne cessary for them to make changes in their equipment, opera ti ons, or procedures.
x User ’s Manual Instr uctions for IC CS-03 c er tified equipment 1. The Industry Canada l abel identif ies certified equip ment. This certification means that the equipment meets certain telecommun.
User ’s Manual xi Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian te lecoms network must have a valid Austel permit. This modem has been desi gned to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia .
xii User ’s Manual Notes for use of this device in New Zealand ■ The grant of a T elepermit for a device in no way in dicates T elecom acceptance of responsibi lity for the correct oper ation of that device under all operating conditions.
User ’s Manual xiii ■ When used in the Auto Answe r mode, the S0 register must be set with a value of 3 or 4. This ensures: ■ a person calling your modem will hear a short burst of ringing before the modem answers. This confirms that the call has been successfully switch ed through the network.
xiv User ’s Manual The charge for a T elepermit assessment is $337.5 0. An additional charge of $337.50 is payable wh ere an asse ssment is based on reports against non-T elecom New Zeala nd S pecificat ions. $1 12.50 is charged for ea ch variation when submitted at the same time as the original.
User ’s Manual xv Visit http://www .e nergystar .gov or http://www .energ yst ar .gov/power management for more information r egard ing the ENERGY ST AR Program. Optical disc driv e safety instr uctions Panasonic D VD Super Multi D VR-TD08TBL/D VR-TD08TBT Be sure to check the international prec autions at the end of th is section.
xvi User ’s Manual T OSHIB A SAMSUNG ST ORA GE TECHNOLO GY D VD Super Multi TS-L633P/TS-L633A ■ THIS DVD WRIT ABLE DRIVE EMPLOY A LASER SYSTEM TO ENSURE PROPER USE OF THIS PRODUCT , PLEASE READ THIS INSTRUCTION MANUAL CAREFULL Y AND RET AINFOR FUTURE REFERENCE.
User ’s Manual xvii T OSHIB A SAMSUNG ST ORAGE TECHNOLOGY CD-RW/D VD-R OM Drive TS-L 463A ■ The CD-RW/DVD-ROM drive empl oys a las er system. T o ensure proper use of this prod uct, please read this instructio n manual carefully and retain for future reference.
xviii User ’s Manual TEAC CD-RW/D VD-RO M Driv e DW-224S ■ The CD-RW/DVD-ROM dr ive emplo ys a laser system. T o ensure proper use of this product, p lease re ad this instruction manu al carefully and retain for future reference. Should the u nit ever require maintenance, contact an au thorized service location.
User ’s Manual xix Inter na tional Pr ecautions CAUTION: This appliance co ntains a laser system and is classified as a "CLASS 1 LASER PRODUCT ." T o use this model properly , read the instruction manu al carefully and keep thi s manual for your future referenc e.
xx User ’s Manual OBS! Apparaten innehåller laserkomponent som avge r laserstråining överstigande gränsen för laserkla ss 1. V AROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä sil milie vaarallista lasersäteilyä.
User ’s Manual xxi Impor tant Notice Copyrighted works incl uding, but not lim ited to music, video, computer program, databases are protected by copyright laws.
xxii User ’s Manual.
User ’s Manual xxiii Gener al Pr ecautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever , cert ain precautions should be observed to further reduce the risk of personal injury or damage to the computer .
xxiv User ’s Manual Heat injur y ■ Avoid prolonged physical contact with the computer . If th e computer is used for long periods, its surface can become very warm.
User ’s Manual xxv T able of Contents Preface Manual content s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxi Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xxvi User ’s Manual Writ able discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-9 CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10 DVDs . . . . . .
User ’s Manual xxvii Using the microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 Using the TOSHIBA Face Recognition . . . . . . . . . . . . . . . . . . . . . . . 4-13 Note on Use . . . . . . . . . . . . . . . . .
xxviii User’s Manual Bluetooth S tack for Windows by TOSHIBA (depends on the model purchased) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-37 Wireless communication switch . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual xxix Hot keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14 Panel power off/on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14 System Auto Off . . . .
xxx User ’s Manual Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-7 LCD panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Hard disk drive . . .
User ’s Manual xxxi Pr eface Congratulations on your purchase of the TOSHIBA Satellite M300/M300D/ L310/L310D, Satellite Pro M300/M300D/L 310/L310D Series computer . This powerful notebook computer provides excel lent expansion cap ability , including multimedia devices, and it is designed to provide years of reliable, high-performance computing.
xxxii User’s Manual Preface Chapter 4, Operating Basics , includes instructions on using the following devices: T ouchPad, Sound System, optic al media drives, modem, wire less communication and LAN. It also provid es tips on care of the computer , and CD/DVDs.
User ’s Manual xxxiii Preface K ey operation Some operations require you to simultaneously use two or more keys. We identify such operations by the key top symbols separated by a plus sign ( + ). For example, Ctrl + C means you must hold down Ctrl and at the same time press C .
xxxiv User’s Manual Preface.
User ’s Manual 1-1 Chap ter 1 Intr oduction This chapter provides an equipment checkli st, and it identifies the computer's features, options and accessories. Equipment chec klist Carefully unpack your computer . Save the box and p acking materials for future use.
1-2 User ’s Manual Introduction Software Microsoft ® Windows V ista™ The following software is preinstalled: ■ Microsoft ® Windows Vist a™ ■ Microsoft Internet Explorer ■ TOSHIBA V alue .
User ’s Manual 1-3 Introduction F ea tures Please visit your region’s web site for the configurat ion details of the model that you have purchased. Processor Memory Built-in Depend on the model you purch ased. Please visit your region’s website for the configura tion detai ls of the model that yo u have purchased.
1-4 User ’s Manual Introduction Power Disks Battery Pack Y ou r computer is powered by a rechargeable lithium-ion battery pack. RTC Battery The internal RTC battery backs up the Real T ime Clock and calendar. AC Adaptor The universal AC adaptor provides power to the system and recharges the batteries when they are low .
User ’s Manual 1-5 Introduction CD-RW/DVD-ROM drive Some models are equi pped with a full-size, CDRW/ DVD-ROM drive module that allows you to run CD/DVDs without using an adaptor . It reads DVD-ROMs at maximum 8 speed and CD- ROMs at maximum 24 speed.
1-6 User ’s Manual Introduction Display The computer's LCD panel supports high-resolution video graphics. T he screen can be set at a wide range of viewing angles for maxi mum comfort and readability .
User ’s Manual 1-7 Introduction Keyboard Pointing Device Ports Built-In 14.1" WXGA CSV w ith 1280 horizontal × 800 vertical pixels. Graphics Controller Graphics controller maximizes display performance. Refer to Display Controller and Modes section in Appendix B, Display Controller and Modes for more information.
1-8 User ’s Manual Introduction Slots Multimedia ExpressCard Slot The ExpressCard slot that can a ccommodate two standard module formats; an ExpressCard/34 module and an ExpressCard/54 module. An ExpressCard module is a small add-in card technology based on the PCI Express and Universal Serial Bu s (USB) interfaces.
User ’s Manual 1-9 Introduction Communications Modem Where present, it provides capability for data and fax communication. It supports V .90 (V .92). The speed of data transfer and fax communication depends on the analog tele phone line conditions. The computer has a modem jack for connection to a telephone line.
1-10 User ’s Manual Introduction Security Special f eatures The following features are either un ique to TOSHIBA computers or are advanced features, which make the co mputer more convenient to use. Bluetooth Some computers in this series are equipped with Bluetooth functio ns.
User ’s Manual 1-1 1 Introduction HDD Automatic Power Off *1 This feature automatically cuts off power to the hard disc drive when it is not accessed for a specified time. Power is restored when the hard disc is accessed. This can be specified in the Power Options.
1-12 User ’s Manual Introduction T OSHIB A V a lue Added Pac kage This section describes the T OSHIBA Component features pr e-installed on the computer .
User ’s Manual 1-13 Introduction Utilities and Applications This section describes pre-installed utilities and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme.txt files. TOSHIBA Assist TOSHIBA Assist is a graphi cal user interface that provides easy access to help and services.
1-14 User ’s Manual Introduction FingerPrint utili ty This product has a fingerp rint utility installed for the purpose of enrolling and recogni zing fingerprints. (depending on the model purchased.) By enrolling the ID and password to the fingerprint authenticat ion device, it is no longer necessary to input the password from the keyboard.
User ’s Manual 1-15 Introduction TOSHIBA ConfigFree ConfigFree is a suite o f utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks.
1-16 User ’s Manual Introduction Options Y ou can add a number of options to make your computer even more powerful and convenient to use. Refer to Chapter 8 Optional Devices , for details. The following optio ns are available: Memory exp ansio n T wo memory modules can be installed in this computer .
User ’s Manual 2-1 Chap ter 2 T he Gr and T our This chapter identifies the vari ous components of your computer . Become familiar with each component before you operate the computer . F ront with the display c losed The following figure shows the computer's front with its display panel in the closed positi on.
2-2 User ’s Manual The Grand T o ur Vo l u m e D i a l Use this dial to adjust the vo lume of the stereo speakers or headphones. Infrared Receiv er Window An infrared receiver window is provided with some models. This is a sensor window that receives signals from the remote control which is provided with your computer .
User ’s Manual 2-3 The Grand T our Left side The following figure shows the computer's left side. The left side of the computer Cooling Ve n t s External Monitor Port Microphone Jack eSA T A/USB combo port Headphone ( S/P DIF ) Jack HDMI ExpressCard Slot i.
2-4 User ’s Manual The Grand T o ur Right side The following figure shows the computer's ri ght side. The right side of the computer * The figure shows FM Antenna Jack. Universal Serial Bus (USB 2.0) ports Universal Serial Bus port s which comply to the USB 2.
User ’s Manual 2-5 The Grand T our Bac kside The following figure shows the computer's back panel. The backside of the computer LAN Jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megab its per second, 100BASE-TX).
2-6 User ’s Manual The Grand T o ur Under side The following figure shows the undersid e of the computer . Make sure the display is closed before turning over your computer .
User ’s Manual 2-7 The Grand T our F ront with the display open This section shows the front of the co mputer with the display open. Refer to the appropriate illustration fo r details. T o open the display , lift the front of the display . Position th e display at a comfortable viewing angle.
2-8 User ’s Manual The Grand T o ur Built-in micr ophone The microph one is used with the W eb Camera to talk to other W eb Camera users and to record messages on windows media. Power Button Turns the computer on a nd off and puts it into Hibernation mode and wakes it up from Slee p mode.
User ’s Manual 2-9 The Grand T our Optical Disc Driv e An A T API interface contro ller is used for optical disc operation. When the computer is accessing an optical disc, an indicator on the drive glows.
2-10 User ’s Manual The Grand T o ur CDs ■ CD-R discs can be written only once. The recorded dat a cannot be erased or changed. ■ CD-RW discs can be recorded more than once. Use either 1, 2, or 4 multi speed CD-RW discs or high-speed 4- to 10-speed d iscs.
User ’s Manual 2-1 1 The Grand T our The read speed i s slower at the centre of a disc and faster at the outer edge. DVD read 8 speed (maximum) DVD-R write 8 speed (maximum) DVD-RW write 6 speed (ma.
2-12 User ’s Manual The Grand T o ur AC adaptor The AC adaptor converts AC po wer to DC power and reduces the voltage supplied to the computer . It can auto matica lly adjust to any voltage from 100 to 240 volts and to a frequency of ei ther 50 or 60 hertz, enabling you to use the computer in almo st any country/region.
User ’s Manual 2-13 The Grand T our R emote controller A remote controller , which is provided with some models, enables you to perform some functio ns of your computer from a dist ant location . Y ou can use your remote controll er wit h Media Center to play CDs, DVDs and videos, to vie w pictures.
2-14 User ’s Manual The Grand T o ur Power S tart s or terminate th e operating system. This button functions like the pow er button of your computer .
User ’s Manual 2-15 The Grand T our Using the remote contr oller Some computers include a remote contro l unit, which allows you to control some of your computer ’s functions from a distant location. Operational range of the remote controller Point the remote controller at your computer and press a button.
2-16 User ’s Manual The Grand T o ur Operational range of the remote controller 30 Degrees 15 Degrees (V ertically) Infrare d Receiver Window 5M 30 Degrees Remote Controller Even if within the effective scope as described above, th e remote controller may malfunction or not work correctly in the following cases.
User ’s Manual 2-17 The Grand T our Installing/R emo ving ba tteries Be sure to install the provided CR2016 type batteries before usin g the remote controller . The procedures for installing and removing the batteries vary depending on the type of the remote controller .
2-18 User ’s Manual The Grand T o ur Installing the batteries 1. Open the battery cove r on the back side of the remote controller . Opening the battery cover 2. Be sure to place the batteries with correct polarities. Press the battery down to the stoppe r then push it forw ard to fit into the battery case.
User ’s Manual 2-19 The Grand T our Slim size r emote controller 1. Open the battery cover on the back side of the remote contro ller . 2. Hold down the stopper and slide the batte ry out of battery case. Removing the batteries 3. Insert the battery in pl ace.
2-20 User ’s Manual The Grand T o ur.
User ’s Manual 3-1 Chap ter 3 Getting Star ted This chapter provides basic information to get you started using your computer . It covers the following topics: ■ Installing the battery pack ■ Co.
3-2 User ’s Manual Getting S tarted Installing the ba tter y pack T o install a battery , follow the steps below . 1. T urn the computer's power off. 2. Disconnect all cables co nnected to the computer . 3. Insert the battery pack. The Batter y Release Latch clic ks into place.
User ’s Manual 3-3 Getting S tarted Connecting the AC adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
3-4 User ’s Manual Getting S tarted 2. Connect the AC adaptor's DC o utput plug to the DC IN 19V jack on the back of the computer . Connecting the adaptor to the computer 3. Plug the power cord into a live wall outlet. Opening the display The display panel can b e rotated in a wide range of angles for optimal viewing.
User ’s Manual 3-5 Getting S tarted T ur ning on the pow er This section describes how to turn on the power . Press and hold the computer's power button fo r two or three seconds.
3-6 User ’s Manual Getting S tarted T ur ning of f the pow er The power can be turned off in one of the following mo des: Shut down (Boot), Hibernation o r Sleep Mode. Shut Do wn mode (Boot mode) When you turn off the power in Shut Down mode no data is saved and the computer will boot to the ope rating system’s main scr een.
User ’s Manual 3-7 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous working environment more rapidly than does Hibernation Mode.
3-8 User ’s Manual Getting S tarted Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned ba ck on immediately after shutting down . ■ Memory circuits are exposed to static electricity or electrical noise.
User ’s Manual 3-9 Getting S tarted Automatic Hibernation Mode The computer will enter Hibernati on mode automatica lly when you press the power button o r close the Display Screen. First, however , make the appropriate settings according to th e steps below .
3-10 User ’s Manual Getting S tarted System R eco ver y Options About 1.5GB hidden partition is alloca ted on the hard drive for the System Recovery Options. System R eco v er y Options The System Re covery Options f eature is inst alled on the hard d isk when shipped from the factory .
User ’s Manual 3-1 1 Getting S tarted 3. T urn on your comp uter to open Windows Vista. 4. Insert the (first) blank me dia in to the tray of the Optical Drive. 5. Double Click the Recovery Disc Creator icon on the Windo ws V ista desktop, or select the application from S tart menu.
3-12 User ’s Manual Getting S tarted R estoring the preinstalled software fr om R eco v er y Media If the preinstalled files are damaged, use the Recovery Media you created, or HDD recovery to restore them. T o restore the opera ting system and all preinstalled software, follow the steps below .
User ’s Manual 4-1 Chap ter 4 Oper a ting Basics This chapter gives information on basic operation s including using the T ouchPad, optical media drives, so und system, modem, the wireless LAN and LAN. It also provides tips on caring for your computer .
4-2 User ’s Manual Operating Basics For some functions, yo u can tap the T ouchPad i nstead of pressing a control button. Using the finger print sensor This product has a fingerprint utility installed for the purpose of enrolling and recognizing fingerp rints.
User ’s Manual 4-3 Operating Basics How to s wipe the finger Using the following steps when swiping fin gers for fingerprint registration or authentication will help to mi nimi ze authentication fa ilures: 1. Align the first joint of th e finger to the center of the sensor .
4-4 User ’s Manual Operating Basics P oints to note about the finger print sensor Failure to follow these guidelines might result in (1) damage to the sensor or cause sensor failure, (2) finger recognition problems, or lower finger recognition success rate.
User ’s Manual 4-5 Operating Basics ■ The fingerprint for each finger is different and unique. Please ensure that only the registered or enrolled fi ngerprint or fingerprints are used for identifi cation. ■ Check sliding position a nd speed. ■ Fingerprint data is enrolled up to 30~34.
4-6 User ’s Manual Operating Basics P oints to note about the finger print utility ■ If Windows Vista™’s file encrypti on function EFS (Encryption File System) is used to encrypt a file, t he file cannot be further encrypted using the encryption function of this software.
User ’s Manual 4-7 Operating Basics 7. In case of finger injury or authent ication failure, it is recommended that another fingerprint also be en rolled. The following message will be displayed: [We recommended enrolling at least two fingerprint images.
4-8 User ’s Manual Operating Basics How to enable fingerprint system boot authentication settings It is necessary to first enroll your fingerprint with the TrueSuite Access Manager application prior to enabling and configuring the fin gerprint Pre- OS feature.
User ’s Manual 4-9 Operating Basics How to enable fingerprint Single Sign-On feature It is necessary to first enroll your fingerprint with the T rueSuite Access Manager application prior to enabling and configuring the fin gerprint Single Sign-On feature.
4-10 User ’s Manual Operating Basics How to enable/disable USB sleep and c har ge function Y ou can set enable/disable USB sleep and charge function in HW setup Refer to the USB Sleep and Charge fu nction in Chapter 7 HW Setup . ■ The “USB Sleep and Charge function” onl y works for compatible port s.
User ’s Manual 4-1 1 Operating Basics Using the W eb Camera This section describes the bundl ed webc am utility , which can capture still and video images.
4-12 User ’s Manual Operating Basics Capture Stil l Images Click to see a previe w of the captured image; yo u can also e-mail th e image. Vide o Recording Click to prepare for recording. Click again to start recording. One more to stop recording and see preview of the video.
User ’s Manual 4-13 Operating Basics Using the micr ophone Y ou r computer has a built-in microph one that can be used to record monaural sounds into your applications . It can also be used to issu e voice commands to applications that suppo rt such functions.
4-14 User ’s Manual Operating Basics Note on Use ■ TOSHIBA Face Recognition does not guarantee the correct identification of a user . Changes to the likeness of a registrant, such as hair style changes, wearin g a cap, or wearing gl asses may effect the recognition rates when such changes occur a fter the registrant had registered.
User ’s Manual 4-15 Operating Basics 3. Click the Next button to start the guide. 4. First, take a picture while moving your neck slightly to the left and right. 5. Now take a picture while moving your neck down and up. ■ Click the Back button to practice the guide once more.
4-16 User ’s Manual Operating Basics 2. Select a user which is deleted in the Management screen. 3. Click the Delete button. "You are about to delete the user data.
User ’s Manual 4-17 Operating Basics 1:1 Mode Login screen 1. T urn on th e computer . 2. The Select Tiles screen will be displaye d. 3. Select the tile for facial authentication. 4. The Select Account screen will be displayed. 5. Select the account, and click the arrow button.
4-18 User ’s Manual Operating Basics Loading discs T o load a d isc, follow the steps below and refer to the figures. 1. a. When the power is on, press the eject button to open the drawer slightly .
User ’s Manual 4-19 Operating Basics b. Pressing the eject button will not open the drawer when the disc drive's power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of th e eject button.
4-20 User ’s Manual Operating Basics 3. Place the disc, label side up, in the drawer. Inserting a disc 4. Press gently at the centre of the disc until you feel it click into place. The disc should lie b elow the top of the sp ind le, flush with the spindle base.
User ’s Manual 4-21 Operating Basics Closing the disc drawer Re mo ving discs T o remove the disc, follow the steps below and refer to the figure. 1. T o pop the drawe r partially open, pr ess the eject button. Gently pull the drawer out until it i s fully opened.
4-22 User ’s Manual Operating Basics 2. The disc extends slightly over the side s of the drawer so you can hold it. Hold the disc gently by its edges and lift it out. Removing a disc 3. Push the centre of the drawer to cl ose it. Press gently until it locks into place.
User ’s Manual 4-23 Operating Basics Before writing or rewriting Please observe the following points when you write or rewrite the data. ■ We recommend the following manufacturers of CD-R and CD-R W media. Media quality can affect write or rewrite success rates.
4-24 User ’s Manual Operating Basics W hen writing or rewriting Note the following when yo u write or rewrite a CD-R or CD-RW . ■ Always copy data from the HDD to the CD. Do not use cut-and-paste. The original data will be lost if there is a write error .
User ’s Manual 4-25 Operating Basics Y ou can use the DV D Super Mul ti drive t o write dat a to ei ther CD-R/R W or DVD-R/-RW/+R/+R W/-RAM discs. The foll owing applications fo r writing are preinstalled: TOSHIBA Disc Creator and TOSHIBA Direct Disc W riter .
4-26 User ’s Manual Operating Basics ■ If the disc is poor in quality , dirty or damaged, writing or rewriting errors may occur . Be careful to check the disc for dirt or damage before yo u use it. ■ The actual number of rewrites to CD-RW , DVD-RW , DVD+RW or DVD-RAM is affected by the quality of the disc and the way it is used.
User ’s Manual 4-27 Operating Basics ■ Be sure to close all other software programs except the writing software. ■ Do not run software such as a screen saver , which can put a heavy load on the CPU. ■ Operate the computer under the power scheme High Performance .
4-28 User ’s Manual Operating Basics Disc laimer (D VD Super Multi driv e) TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/RW or DVD-R/-R W/+R/+RW/-RAM disc that may be caused by writing or rewriting with this product.
User ’s Manual 4-29 Operating Basics How to mak e a DVD-Video Simplified steps for making a DVD-V ideo from video data captured from a DV -Camcorder: 1. Click Æ All Progra ms Æ DVD MovieFactory for TOSHIBA Æ Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory .
4-30 User ’s Manual Operating Basics Impor tant infor mation f or use Note the following limitations when you write Video DVD: 1. Editing digital video ■ Log in with Administrator rights to use DVD MovieFactory . ■ Make sure that your computer is running on AC power when using DVD MovieFactory .
User ’s Manual 4-31 Operating Basics 3. About S traight to Disc ■ Not support to record on DVD- R/+R disc ■ Not support to record DVD+VR format by HDV ■ HDV support to burn DVD-Video only ■ DVD-VR format not support to add Menu 4.
4-32 User ’s Manual Operating Basics R e gion selection T elecommunication reg ulations vary from one region to another , so you will need to make sure the internal modem's settings are correct for the region in which it will be used. T o select a re gion, follow the steps below .
User ’s Manual 4-33 Operating Basics Location list for region selection. A submenu appears displaying location information for te lephony . Open dialog box, if the m odem and T elephony Current Location region code do not match. A warning dialog box is displayed if current settings for region code and telephony location are in correct.
4-34 User ’s Manual Operating Basics Connecting the internal modem Disconnecting T o disconnect the internal mode m cable, follow the steps below . 1. Pinch the lever on the connector in the telephone jack and pull out the connector . 2. In the same way , pull the cable’s other conne ctor out of the computer .
User ’s Manual 4-35 Operating Basics Using the FM tuner The availability of this feature is depen ding on the mo del you purchased. 1. Plug the FM tun er antenna into the FM Anten na jack. Plug FM tuner antenna into the jack Select Star t Æ All Programs Æ FM T uner Utility to s tart FM sof tware.
4-36 User ’s Manual Operating Basics W ireless LAN The Wireless LAN feature is not avail able on all models. Where present, it supports the A,B, G and draft N standards but it is compatible with other LAN systems based on Direct Sequen ce S pread S pectrum/Orthogonal Frequency Division Multiplexing radi o technology that complies with IEEE802.
User ’s Manual 4-37 Operating Basics Bluetooth Stack f or W indo ws by T OSHIBA (depends on the model purchased) Please note that this software is specifically designed for the following operating systems: ■ Microsoft ® Windows Vist a™ Detailed information regarding the use with these oper ating systems is listed below .
4-38 User ’s Manual Operating Basics If you used the T ask Bar to disable Wireless LAN, you will need to restart the computer to re-enable it. Alter nativel y , you can also follow this procedure: 1. In the Control P anel , click System and Maintenance .
User ’s Manual 4-39 Operating Basics Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub co nnector . Check with your LAN administrator before connecting to a hub. Disconnecting LAN cable T o disconnect the LAN cable, follow the steps below .
4-40 User ’s Manual Operating Basics Mo ving the computer The computer is d esigned for rugged du rability . However , a few si mple precautions taken when moving the computer will help ensu re trouble-free operation. ■ Make sure all disk activity has ended before moving the computer .
User ’s Manual 5-1 Chap ter 5 T he K eyboar d The computer's keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101 / 102-key keyboard functions can be executed on the computer .
5-2 User ’s Manual The Keyboard F1 ... F12 function k eys The function keys (not to be confused with Fn ) are the 12 keys at the top of your keyboard. These keys function differently from other keys. F1 through F1 2 are called function keys because they execute programmed functions wh en pressed.
User ’s Manual 5-3 The Keyboard Press Fn + F1 1 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys. Refer to the Keypad overlay section in this chapter for more i nformation on how to operate these keys.
5-4 User ’s Manual The Keyboard Brightness (decreases): Turns the monitor brightness down. Brightness (increases ): T urns the monitor brightness up. Wireless: Switches the active wirele ss devices if the wireless communication switch is switched on.
User ’s Manual 5-5 The Keyboard TOSHIBA Zooming Utility (enlarge): Increases the icon size on the desktop or the font size within one of the supporte d application windows.
5-6 User ’s Manual The Keyboard Ke y p a d ov e r l a y Y our co mputer's keyboard does not h ave an independent numeric keypad, but its numeric keyp ad overlay functions like one. The keys in the centre of the key board with gra y letters make up the numeric keypad overlay .
User ’s Manual 5-7 The Keyboard T empor arily using nor mal k eyboard (ov er lay on) While using the overlay , you can te mporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key . All keys will operate as if the overlay were off.
5-8 User ’s Manual The Keyboard.
User ’s Manual 6-1 Chap ter 6 P ow er and P ow er-Up Modes The computer's power resources in cl ude the AC adaptor and interna l batteries. This chapter gives details on making the most effective use of these resources including charging and ch anging batteries, tips for saving battery power , and power up modes.
6-2 User ’s Manual Power and Power-Up Modes P o wer indica tor s As shown in the above table, the Battery . Powe r indicators on the system indicator alert you to the computer ’s operating cap ability and battery charge status. Batter y indicator Check the Battery indicator to determine the status of the battery pack.
User ’s Manual 6-3 Power and Power-Up Modes P ower indica tor Check the Power indicator to determine the power status: Ba tter y types The computer has the following ba tteries: ■ Battery pack ( 3cell, 6cell, or 9cell depending on the model.
6-4 User ’s Manual Power and Power-Up Modes Battery pack T o ensure that the battery pack maintains its maximum cap acity , operate the computer on battery power at le as t once a month un til the battery pack is fully discharged. Refer to Extending battery life in this chapter for procedures.
User ’s Manual 6-5 Power and Power-Up Modes The charge in the RTC battery is ge tting low or has been exha usted. Y ou will need to set the d ate and time with in the BIOS setup using the foll owing steps: 1. Press F2 key - the BIOS setup screen will be displayed.
6-6 User ’s Manual Power and Power-Up Modes Car e and use of the ba tter y pac k The battery pack is a vital component of portable compu ting. T aking proper care of it will help ensure longer operat ing time on battery power as well as a longer life for your battery pack.
User ’s Manual 6-7 Power and Power-Up Modes 8. Never expose the battery pack to abnormal shock, vibration or pressure. The battery pack’ s internal protective device will fail, causing it to overheat, explode, ignite or lea k caustic liquids possibly resulting in death or serious injury .
6-8 User ’s Manual Power and Power-Up Modes 6. Be sure to monitor the remaining bat tery po wer . If the battery pack and real time clock battery discharge completely , Sleep Mode will not function and data in memory will be lost. Also, the computer might register an incorrect time and date.
User ’s Manual 6-9 Power and Power-Up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Battery charging notice The battery may not charge right away under the following conditions: ■ The battery is extremely hot or cold.
6-10 User ’s Manual Power and Power-Up Modes Monitoring batter y capacity Remaining battery pow er can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via.
User ’s Manual 6-1 1 Power and Power-Up Modes Re taining data with po wer off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.
6-12 User ’s Manual Power and Power-Up Modes R eplacing the ba tter y pack When the battery pack reaches the end o f its operating life you will need to install a new one.
User ’s Manual 6-13 Power and Power-Up Modes Installing the ba tter y pac k T o install a battery , follow the steps below . 1. T urn the computer's power off. 2. Disconnect all cables connecte d to the computer . 3. Insert the battery pack. 4.
6-14 User ’s Manual Power and Power-Up Modes 2. Enter the password. 3. Press Enter . P o wer-up modes The computer has the following power-up modes: ■ Boot Mode: Computer shuts down without saving dat a. Always save your work before you turn t he computer off in boot mode.
User ’s Manual 7-1 Chap ter 7 HW Setup This chapter explains how to us e TOSHIBA HW Setup program to configure your computer . TO SHIBA HW Setup lets you configure settings for General, Password, Display , Boot Priority , Keyboard, LAN, and USB. Accessing HW Setup T o run HW Setup, click , All Programs , TOSHI BA , Utilities , HWSetup .
7-2 User ’s Manual HW Setup Password This tab allows you to set or reset the user password for power on. User Password Lets you register a new password or un-register an existing password. Owner S tring This blank field is used to display a message when the password field is displayed on startup.
User ’s Manual 7-3 HW Setu p Keyboard Wa ke-up on Keyb oard When this feature is enabl ed and the computer is in Sleep Mode, you can turn on the computer by pressing any key . It is effective only for the internal keyboard and only when the computer is in Sleep Mode.
7-4 User ’s Manual HW Setup.
User ’s Manual 8-1 Chap ter 8 Optional De vices Optional devices can expand the computer's capabilities and its versatility . This chapter describ es connection or installation of the follo win.
8-2 User ’s Manual Optional Devices ExpressCar d Slot The computer is equ ipped with an Ex pressCard slot that can accommodate one ExpressCard. Inser ting an Expr essCard One ExpressCard connecto r is located on the left side of the computer .
User ’s Manual 8-3 Optional Devices Re mo ving an ExpressCar d T o remove the ExpressCard, follow the step s below . 1. Click the Safety Remov e Hardware icon on the T ask Bar . 2. Click the ExpressCard you want to remove. 3. Press the ExpressCard once to extend it.
8-4 User ’s Manual Optional Devices SD/SDHC/MMC/MEMOR Y STICK / MEMOR Y STICK PRO/xD Memor y car ds The computer is equipped with a multip le digital media card slot that can accommodate SD/SDHC/MMC/MEMORY STICK/ MEMOR Y STICK PRO/ xD memory cards.
User ’s Manual 8-5 Optional Devices Installing a memor y car d T o install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Re mo ving a memor y card T o remove a memory card, follow the step s below: 1.
8-6 User ’s Manual Optional Devices Memor y car d car e 1. Do not write to a memory card if the battery power is low . Low power could affect writing accuracy . 2. Do not remove a memory card while read/write is in progress. 3. The memory card is designed so that it can be inserted only one way .
User ’s Manual 8-7 Optional Devices Memor y e xpansion Y ou can install additional memory in the computer's memo ry module socket to increase the amount of RAM. This section describes how to install and remove a memory module. Installing a memor y module Follow the steps below to install a memory module.
8-8 User ’s Manual Optional Devices Removing the memory module cover 6. Lift one side of the insulator sheet and fit the module's connectors into the computer's connectors at about a 45 degree angle. Press the module carefully to ensure a firm connection.
User ’s Manual 8-9 Optional Devices 8. Seat the cover and secure it with the screws. 9. Replace the battery pack as described in Chap ter 6, Power and Power- Up Modes . 10. T urn the power on and make sure the added memory is recognized. Open System in the Control Panel and click the General ta b.
8-10 User ’s Manual Optional Devices Removing the memory module 6. Seat the cover and secure it with screws and replace th e battery pack. Additional batter y pac k Y ou can increase the portability of the computer with additional battery packs.
User ’s Manual 8-1 1 Optional Devices Exter nal monitor An external analog monitor can be connected to the external mo nitor port on the computer . Refer to Appendix B, Display Controlle r and Modes . The computer supports several video modes. T o connect a monitor , follow the steps below .
8-12 User ’s Manual Optional Devices 2. Plug the other end of the HDMI cabl e in to the HDMI out port on yo ur computer . Setting for displa y video on HDMI T o view video on the HDMI devi ce, be sure to configure the following settings otherwise you may find that nothing is displayed.
User ’s Manual 8-13 Optional Devices Precautions 1. Make a back-up of your data before transferring it to the comp uter . There is a possibility that the original data will be damaged. There is a particular risk that some frames wil l be deleted in the case of digital video transfer .
8-14 User ’s Manual Optional Devices Disconnecting 1. Open the Safety Remove Hardware icon on the T ask Bar . 2. Point to i.LINK (IEEE1394) device and click.
User ’s Manual 8-15 Optional Devices Disconnecting an eSA T A device When you have finished using an eSA T A device, you can follow the procedures below in order to disconnect it: 1. W ait for th e indicator light of an eSA T A devi ce to go out to make sure all activity has stopped.
8-16 User ’s Manual Optional Devices.
User ’s Manual 9-1 Chap ter 9 T r oubleshooting TOSHIBA designed the computer for dur ability . However , should problems occur , following the procedures i n this chapter can help to determine the cause. All readers should become familiar with this chapter .
9-2 User ’s Manual T roubleshooting Preliminar y chec klist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious probl em. ■ Make sure you turn on all peripheral devices before you turn on the computer .
User ’s Manual 9-3 T roubleshooting Har dware and system chec klist This section discusses problems ca used by your computer's hardware or attached peripherals.
9-4 User ’s Manual T roubleshooting Self test When the computer starts up, the self test will be run automati cally , and the following will be displayed : This message remains on the screen for a few seconds.
User ’s Manual 9-5 T roubleshooting AC power If you have trou ble turning on the co mputer with the AC adaptor connected, check the Battery indicator . Refer to Chapter 6, Power and Power-Up Modes for more information. Battery If you suspect a problem with the battery , check the Battery indicator .
9-6 User ’s Manual T roubleshooting Disposing of PC and PC batteries ■ Discard this PC in accordance w ith applicable laws and regul ations. For further information, contact your local government.
User ’s Manual 9-7 T roubleshooting ■ Reformatting the medi a ■ Reinstalling an operat ing system from the recovery CD-ROM The procedures above d elete only the initial part of the data used for file management. This makes the file in visible to the operati ng system, but the data can still be read by specializ ed utilities.
9-8 User ’s Manual T roubleshooting LCD panel Apparent LCD problems may be related to the computer's setup. Har d disk driv e Problem Procedure No display Press hot keys Fn + F5 to change the display priority , to make sure it is not set for an external monitor .
User ’s Manual 9-9 T roubleshooting Rec over y Di s cs CD-RW/D VD-R OM driv e For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure The following message appears when executing Recovery Disc Creator . "The Recovery Disc Creator can not be launched because there is no recovery partition.
9-10 User ’s Manual T roubleshooting Some CD/DVDs run correctly , but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software's needs. Check the CD/DVD documentation.
User ’s Manual 9-1 1 T roubleshooting D VD Super Multi driv e For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure Y ou cannot access a CD/DVD in the drive Make sure the drive's drawer is securely closed. Press gently until it clicks into place.
9-12 User ’s Manual T roubleshooting Some CD/DVDs run correctly , but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software's needs. Check the CD/DVD documentation.
User ’s Manual 9-13 T roubleshooting P ointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. T ouchPad Problem Procedure On-screen pointer does not respond to Pad operation The system might be busy .
9-14 User ’s Manual T roubleshooting USB mouse USB Also refer to your USB device’s documentation. Problem Procedure On-screen pointer does not respond to mouse operation The system might be busy . If the pointer is shaped as an hourglass, wait for it to resume its normal shape and try again to move it.
User ’s Manual 9-15 T roubleshooting USB Sleep and Charge function Problem Procedure I cannot use the “USB Sleep and Charge function”. The setting of “USB Sleep and Charge function” may be [Disabled]. Chang e the setting to [Enabled] in the HW Setup.
9-16 User ’s Manual T roubleshooting Memor y expansion Refer also to Chapter 8, Optional Devices , for information on installing memory modules. Sound system Refer also to documentation for your audio devices. External devices connected to the compatible port s do not work when connected to a comp atible port.
User ’s Manual 9-17 T roubleshooting Monitor Refer also to Chapter 8, Optional Devices , and to your monitor ’s documentation. Modem Problem Procedure No sound is heard Check the software volume settings. Make sure the headphone connection is secure.
9-18 User ’s Manual T roubleshooting LAN W ireless LAN If the following procedures do not restore LAN access, consult your LAN administrator . For more information on w ireless communication, refe r to Chapter 4, Operating Basics .
User ’s Manual 9-19 T roubleshooting Finger print Sensor ExpressCar d Refer also to Chapter 8, Optional Devices . Problem Procedure Readin g of the fingerprint was not successful Please try aga in using the c orrect postur e. Refer to Using the fingerprint sensor in Chapter 4, Operating Basics .
9-20 User ’s Manual T roubleshooting T OSHIB A suppor t If you require any additional help using your computer or if you are having problems operating the compute r , you may need to contact TOSHIBA for additional technical assistance.
User ’s Manual 9-21 T roubleshooting Singapore TOSHIBA Singapore Pte. Ltd. 438B Alexandra Road #06-01 Alexandra T echnopark Singapore 1 19968 Spai n TOSHIBA Information Systems, ESP AÑA Parque Empresa rial San Fernando Edificio Europa, la Plant a, Escalera A 28830 Madrid United S t ates of America TOSHIBA America Information Systems, Inc.
9-22 User ’s Manual T roubleshooting.
User ’s Manual A-1 A ppendix A Specifica tions This appendix summarizes the computer's technical specifi cations. En vironmental Requirements Power Requirements Built-in Modem Operating Non-ope.
A-2 User ’s Manual S pecifications Communication specification s Communication System Data: Full duplex Fax: Half duplex Communication protocol Data ITU-T -Rec (Former CCITT) Bell Fax: ITU-T -Rec (Former CCITT) V .2 1/V .22/V .22bis/V .32/ V .3 2bis/V .
User ’s Manual A-3 S pecifications T ran smitting level -10 dBm Receiving level -10 to -40 dBm Input/output impedanc e 600 ohms ±30% Error correcting MNP class 4 and ITU-T V .
A-4 User ’s Manual S pecifications.
User ’s Manual B-1 A ppendix B Display Contr oller Display controller The display controller in terprets software commands into hardware commands that turn particular pels on or off.
B-2 User ’s Manual Display Controller.
User ’s Manual C-1 A ppendix C Wi re l e s s L A N Car d Specifica tions Form Factor Mini PCI T ypeIII Comp atibility ■ IEEE 802.1 1 S tandard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "Wi-Fi CERTIFIED" logo is a certification mark of the Wi-Fi Alliance.
C-2 User ’s Manual Wireless LAN Radio Char acteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ T y pe of product Wireless communication is often subject to local radio regulation s.
User ’s Manual C-3 Wireless LAN Suppor ted F requency Sub-bands Subject to the radio regulatio ns that apply in the countries/regions, your Wireless LAN card may support a diff erent set of 2.
C-4 User ’s Manual Wireless LAN.
User ’s Manual D-1 A ppendix D A C P o wer Cor d and Connector s The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Cer tifica tion agencies Europe: Length: Minimum 1.
D-2 User ’s Manual AC Power Cord and Connectors In Europe, power cords must be VDE type, H05VVH2-F and two co nductor . For the United S tates and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.
User ’s Manual E-1 A ppendix E Le gal F ootnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manu al, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers.
E-2 User ’s Manual Legal Footnotes ■ use of computer at temperatures ou tside the range of 5°C to 30°C (41°F to 86°F) or >25°C (7 7°F) at high al titude (all temperature references are ap.
User ’s Manual E-3 Legal Footnotes Ba tter y Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormanc e variations produced by the design of indi vidual components.
E-4 User ’s Manual Legal Footnotes W ir eless LAN The transmission speed ove r the wirel ess LAN and th e distance over which wireless LAN can reach may vary depending on surro unding electromagnetic environment, obst acles, access point design and configuration, and client design a nd software/hardware configurations.
User ’s Manual Glossa ry-1 Glossar y The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system A.
Glossary-2 User ’s Manual Glossary HDMI-CEC: high definition multimed ia inte rface consumer electronics control IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engin.
User ’s Manual Glossa ry-3 Glossary alphanumeric: Keyboard characters including letters, numbers and other symbols, such as punctuation marks or mathematical symbols. alternating current (AC): Electric current that revers es its direction of flow at regular intervals.
Glossary-4 User ’s Manual Glossary C: cache memory: A section of very fast memory in which frequently used information is duplicated for qui ck access. Accessing dat a from cache is faster than a ccessing it from the co mputer's main memory . See also L1 cache, L2 cache.
User ’s Manual Glossa ry-5 Glossary computer program : A set of instructions written for a computer that enable it to achi eve a desire d result. computer system: A combination of ha rdware, software, firmware, and peripheral components assembled to process data into useful information.
Glossary-6 User ’s Manual Glossary documentation: The set of man uals and/or ot h er instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tuto rial information as well as system functions.
User ’s Manual Glossa ry-7 Glossary fingerprint sensor: The fingerprint sensor compares and analyzes the unique characteristics in a fingerprint. firmware: A set of instructions built into the hardware which contro ls and directs a microprocessor’s activities.
Glossary-8 User ’s Manual Glossary icon: A small graphic image displa yed on the screen or in the indicator panel. In Windows, an ic on represen ts an object that the user can manipulate. i.LINK (IEEE1394): This port enables high-sp eed data transfer directly from external devi ces such as digital vide o cameras.
User ’s Manual Glossa ry-9 Glossary Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent cond ucting material. T he viewing-side coating is etched in to character forming segments with le ads that extend to the edge of the glass.
Glossary-10 User ’s Manual Glossary O: OCR: Optical Character Re cognition (reader). A technique or device that uses laser or visible light to identif y characters and inpu t them into a storage device. online st ate: A function al state of a peripheral device when it is ready to receive or transmit data.
User ’s Manual Glossary-1 1 Glossary Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A se t of instructions a computer can execute that enables it to achieve a desired result. See also applica tion.
Glossary-12 User ’s Manual Glossary serial: Processes that occur one at a ti me. In communications, it means the transmission of one bit at a time sequentially over a sing le channel. On your computer, the serial port provides a serial interface between the compu ter and an appropriate device.
User ’s Manual Glossary-13 Glossary window: A portion of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft Windows window . Wireless LAN: Local Area Network (LAN) through wirel ess communication.
Glossary-14 User ’s Manual Glossary.
User ’s Manual Index-1 Inde x A AC adaptor, 1-4 additional, 1-16 connecting, 3-3 ASCII characters, 5-7 B Battery charging, 6 -8 extending b attery life, 6-11 indicator, 6-1 location, 2-6 Monitoring .
Index-2 User ’s Manual Index K Keyboard, 1-7, 5-1 emulating keys on enhanced, 5-2 F1 ... F12 function keys, 5-2 hot keys, 5-3 typewriter keys, 5-1 Windows ® special keys, 5-5 Keypad overlay, 1-10, .
User ’s Manual Index-3 Index 9-21 System start-up, 9-3 USB, 9-15 Wireless LAN, 9-19 Processor, 1-3 R Restarting the computer, 3-9 S Security lock attaching, 8- 15 Sleep Mode, 1-11 setting, 3-6 Syste.
Index-4 User ’s Manual Index.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba M300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba M300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba M300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba M300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba M300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba M300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba M300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba M300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba M300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
