Benutzeranleitung / Produktwartung F60 des Produzenten Toshiba
Zur Seite of 239
User ’ s Manual Qosmio F60 Series.
User ’s Manual ii T able of Content s T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iii Qosmio F60 Series Chapter 2 The Grand T our Front with t he display closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Lef t side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iv Qosmio F60 Series Chapter 6 Power and Power-Up Modes Power conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Monitoring of power cond ition . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual v Qosmio F60 Series Appendix G TOSHIBA PC Heal th Monitor St arting the TO SHIBA PC Health Monito r. . . . . . . . . . . . . . . . . . . . . . G-2 Cleaning the cool ing module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual vi Qosmio F60 Series Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contained herein.
User ’s Manual vii Qosmio F60 Series T rademarks IBM is a registered trademark and IB M PC is a trademark of Internati onal Business Machines Corporation. Intel, Intel S peedS tep, Intel Core, Ce leron and Centrino are tradema rks or registered trademarks of Intel Corporation.
User ’s Manual viii Qosmio F60 Series FCC information FCC notice "Declaration of Conform ity Information" This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to part 15 of the FCC rules.
User ’s Manual ix Qosmio F60 Series EU Conformity S t atem ent This product and - if applicable - t he supplied accessories too are marke d with "CE" and comply therefore wit h th e applic.
User ’s Manual x Qosmio F60 Series Import ant Safety Inform ation for Computers w ith TV tuner IEC60950-1/EN60950-1 Information tech nology equipment - Safety - Coaxial cable connection to this comp.
User ’s Manual xi Qosmio F60 Series Disposing of the computer and the computer ’s b atteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government. ■ This computer contains rechargeable batteries.
User ’s Manual xii Qosmio F60 Series BD ROM UJ141/B D-RE UJ240 ■ The BD-R/RE drive model employs a laser system. T o ensure proper use of this pro duct, please read thi s instruction manual care fully and retain for future refere nce. Should the unit ever require maintenance, contact an authorized service location.
User ’s Manual xiii Qosmio F60 Series.
User ’s Manual xiv Qosmio F60 Series International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .” T o use this model properly , read the instruction manual carefully a nd keep this manual for your future reference.
User ’s Manual xv Qosmio F60 Series OBS! Apparaten innehåller laserkomponent som avger laserstråini ng överstigande gränsen för laserkl ass 1. V AROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaaralli sta lasersäteilyä.
User ’s Manual xvi Preface Congratulations on your purchase of the Qosmio F60 Series computer. This powerful notebook computer provides excel lent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performan ce computing.
User ’s Manual xvii Qosmio F60 Series Abbreviations On first appearance, and whenever ne ce ssary for clarity , abbrevia tions are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are al so defined in the Glossary .
User ’s Manual xviii Qosmio F60 Series T erminology This term is defined in this document as follows: Indicates a potentially hazar dous situation, which could result in de ath or serious injury , if you do no t follow instructions. Star t The word " Sta rt " refers to the " " button in Windows ® 7.
User ’s Manual xix General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho we ver , cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xx Qosmio F60 Series Creating a computer-friendly environm ent Place the computer on a flat surface that is large enough for the computer and any ot her items you are us ing, such a s a printe r . Leave enough space around the comput er and o ther equipment to provide adequate venti lation.
User ’s Manual xxi Qosmio F60 Series Pressure or imp act damage Do not apply heavy pressure to the com puter or subject it to any form of strong impact as this can damage the computer's compone nts or otherwise cause it to malfuncti on. Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system.
User ’s Manual xxii Qosmio F60 Series The cautions on use of a Qosm io F60 Series computer 1. Clean any dust accumulated on t he computer's coolin g vents. The cooling vents are located on the left side and underside of the computer . 2. Cooling vents on the undersid e and left side of the computer .
User ’s Manual 1-1 Chapter 1 Getting S t arted This chapter provides an equipment checkli st, and it identifies the computer ’s features, options and accessories. Equipment checklist Carefully unpack your comp uter , ta king care to save the box and packaging materials for future use.
User ’s Manual 1-2 Getting S tarted Documentation ■ Qosmio F60 Series Portable Personal Computer User ’s Manual (User ’s Manual) ■ Instruction Manual for Safety and Comfort ■ End User License Agreement If any of the items are missing or damaged, contact your dealer immediately .
User ’s Manual 1-3 Getting S tarted Getting St arted This chapter provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening .
User ’s Manual 1-4 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 1-5 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 1-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor' s DC output plug to the DC IN 19V jack on the back of the computer .
User ’s Manual 1-6 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the mai.
User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Powe r-Up Modes fo r more information.
User ’s Manual 1-8 Getting S tarted 2. Press and hold the computer's power button for two or three seconds. Figure 1-5 T ur ning on the power St arting up for the first time The Windows 7 S tartup Screen will be the first screen displayed when you turn on the power .
User ’s Manual 1-9 Getting S tarted 4. Click the Shut down button ( ). 5. T urn of f any peripheral devices connected to your computer . Sleep Mode If you have to interrupt your work, you are able to tu rn off the power without exiting from your software by placing the computer into Sleep Mode.
User ’s Manual 1-10 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 1-1 1 Getting S tarted Benefits of Hibernation Mode The Hiberna tion Mode fe ature provid es the followin g benefit s: ■ Saves data to the hard disk drive when the computer automatically shuts down because of a low battery condition.
User ’s Manual 1-12 Getting S tarted Data save in Hibernation Mode When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the hard disk drive. During this time, t he Hard Disk Drive indicator will glow .
User ’s Manual 1-13 Getting S tarted The procedure is a s follows. Follow the instructions shown on the on- screen menu. 1. T urn off the computer . 2. While holding the F8 key , turn on the computer . 3. The Advanced B oot Options menu will be disp layed.
User ’s Manual 1-14 Getting S tarted 2. T urn on your computer and allow it to load the Windows 7 opera ting system from the hard disk drive as normal. 3. Insert the media into the computer . ■ Insert the first blank disc into the optical disc drive tray , or Insert the USB Flash Memory into one available USB port 4.
User ’s Manual 1-15 Getting S tarted 3. A menu will be displayed from which you should follow the on-screen instructions. Restoring the pre-inst alled softw are from your crea ted Recovery Media If .
User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the vari ous components of the computer - it is recommended that you become familiar with each before you operate th e computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter's left side. Figure 2-2 The left side of the computer Bridge media s lot This slot lets you insert an SD/SDHC memory card, miniSD/microSD Card, Memory S tick (Duo/PRO/PRO Duo), xD picture card and MultiMediaCard.
User ’s Manual 2-3 The Grand T our External monitor port This port allows you to connect an external monitor to the computer . Cooling vents The cooling vents help keep the processor from overheating. Do not block the cooling vents. Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vent s.
User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter ’s right side. Figure 2-3 The right side of the computer Back The following figure shows the comp uter ’s back. Figure 2-4 The back of the computer 1. Headphone and Lin e out jack 3.
User ’s Manual 2-5 The Grand T our Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer . TV antenna port Connect the coaxial cable to this port to watch TV programs on your computer or record them.
User ’s Manual 2-6 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. Figure 2-5 The underside of the computer 1.
User ’s Manual 2-7 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lif t the display panel up and position it at a comfortable viewing angle for you. Figure 2-6 The front of the computer with the display open 1.
User ’s Manual 2-8 The Grand T our Web Ca me r a L ED The Web Camera LED glows when the Web Camera is operating. Web Ca me r a We b C am er a is a device that allows you to record video or take photographs with your computer . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messen ger .
User ’s Manual 2-9 The Grand T our T ouch Pad On/Off button Press this button to enable or d isable the T ouch Pad function . T ouch Pad control buttons The control buttons located below th e T ouch Pad allow you to sel ect menu items or manipulate text and graphics as designated by the on-screen pointer .
User ’s Manual 2-10 The Grand T our Indicators This section explains ind icator functions. System indica tors The LED system indicators for specif ic computer operations glow when those operations are in progress.
User ’s Manual 2-1 1 The Grand T our Keyboard indicators The following figures show the positions of the CAPS LOCK indica tor and the NUMLOCK indicators which show the following condi tions: ■ When the CAPS LOCK indicator glows, the keyboard will prod uce capitals when any letter is typed.
User ’s Manual 2-12 The Grand T our Optical disc drives The computer is configured with a DVD Super Multi drive or a BD-R/RE drive. An A T API interface controller is used for optical disc operation. When the computer is accessing an optical disc, an indicator on the drive glows.
User ’s Manual 2-13 The Grand T our W rit able disc s This section describes the types of writ able CD/DVD/BD discs. Check the specifications of your d rive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Please r efer to Chapter 4, Operating Basics for furthe r informa tion.
User ’s Manual 2-14 The Grand T our BD-R/RE drive The full-size BD-R/RE drive module lets you record data to writable CD/DVD/BDs as well as run either 12 cm (4.7 2") or 8 cm (3.15") CD/DVD/BDs without using an adaptor . The read speed i s slower at the center of a disc and faster at the outer edge.
User ’s Manual 2-15 The Grand T our DVD Supe r Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run ei ther 12 cm (4.72") or 8cm (3.15") CD/DVDs without using an adaptor . The read speed i s slower at the center of a disc and faster at the outer edge.
User ’s Manual 2-16 The Grand T our AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts and to a freque ncy of either 50 o r 60 hertz, enablin g you to use this computer in almost all country/ region. The adaptor converts AC power to DC power and re duces the voltage supplied to this computer .
User ’s Manual 3-1 Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications ma y vary depending on the model you purchased. Processor CPU Y our co mputer is equip ped with one processor and processor type varies depending on model.
User ’s Manual 3-2 Hardware, Utilities and Options Memory Memory slots 1GB, 2GB or 4GB memory modules can be installed in the computer's two memory slots for a maximum of 8,192MB system memory . This computer can be equipped with memory modules of a maximum size of 8,192MB.
User ’s Manual 3-3 Hardware, Utilities and Options Power Disks Battery pack The computer is powered by one rechargeable lithium-ion battery pack (48Wh). Legal Footnote (Battery Life) *4 For more information regarding Batter y Life, please refer to the Legal Footnotes section in Appendix H or click the *4 above.
User ’s Manual 3-4 Hardware, Utilities and Options ■ In this manual, th e word "HDD" or "Ha rd disk drive" also refers to the SSD unless otherwise stated. ■ SSD is a large-c apacity stor age me dia which uses Solid-S t ate Memory in place of a magnetic disk of the hard disk.
User ’s Manual 3-5 Hardware, Utilities and Options Optical disc drive BD-R/RE drive Some models are equipped with a full-size BD- R/RE drive module that lets you record data to rewritable CD/DVD/BDs.
User ’s Manual 3-6 Hardware, Utilities and Options DVD Super Multi drive The drive reads DVD-ROM's at a maximum 8x speed and CD-R OM's at a maximum 24x speed, and writes CD-R's and CD.
User ’s Manual 3-7 Hardware, Utilities and Options Display The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability . Keyboard Pointing Device Ports Display panel 15.
User ’s Manual 3-8 Hardware, Utilities and Options Slots Multimedia Universal Serial Bus (USB 2.0) The computer supports multiple Universal Serial Bus ports that comply with the USB 2.0 st andard. One of the USB ports has eSA T A (External Serial A T A) function.
User ’s Manual 3-9 Hardware, Utilities and Options HDMI out port HDMI out port can conn ect with T ype A connector HDMI cable. HDMI cable can send video and audio signals.
User ’s Manual 3-10 Hardware, Utilities and Options Communications Security LAN The computer has built-i n support for Ethernet LAN (10 megabits per s econd, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).
User ’s Manual 3-1 1 Hardware, Utilities and Options Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures.
User ’s Manual 3-12 Hardware, Utilities and Options Panel power on/off *1 This feature au tomatica lly turns power to the computer off when the display panel is closed, and turns it back on when the display panel is opened. This can be specified in th e Power Options.
User ’s Manual 3-13 Hardware, Utilities and Options Hibernation Mod e This feature let s you tu rn of f the power to the computer without exiting from yo ur software. The contents of main memory are automatically saved to the hard disk drive so that when you next turn the power on again, you can continue working right where you left off.
User ’s Manual 3-14 Hardware, Utilities and Options T OSHIBA V alue Added Package This section describes the TOSHIBA Component features pre-installed on the computer . TOSHIBA Power Saver TOSHIBA Power Saver provides you with the features of more various power supply managements.
User ’s Manual 3-15 Hardware, Utilities and Options Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, please refer to each utility's online manu al, help files or README.
User ’s Manual 3-16 Hardware, Utilities and Options TOSHIBA eco Utility This PC is equipped wi th "eco mode". This mod e slightly lowers performance of some devices to reduce electric power consumption. Y ou can realize measurable power savings by using it continuously .
User ’s Manual 3-17 Hardware, Utilities and Options TOSHIBA Service Stat io n This application allow s your computer to automatically search for TOSHIB A software updates or other alerts from T OSHIBA that are specific to your computer system and its programs.
User ’s Manual 3-18 Hardware, Utilities and Options TOSHIBA ReelT ime This application is a graphical history/indexi ng tool that enables you to view recently accessed files in a fun and easy-to-use forma t. View and scroll through your history of opened or imported files via thumbnails in an intuitive user interface.
User ’s Manual 3-19 Hardware, Utilities and Options Optional devices Optional devices can expand the computer's capabilities and its versatility .
User ’s Manual 3-20 Hardware, Utilities and Options Bridge med ia slot The computer is equipped with a Bri dge media sl ot that can accommodate some kinds of memory media with vari ous memory cap acities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.
User ’s Manual 3-21 Hardware, Utilities and Options Points to note about the SD/SDHC memory card SD/SDHC memory cards compl y with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
User ’s Manual 3-22 Hardware, Utilities and Options ■ Do not touch the metal part of a card or expose i t to liquids or let i t get dirty . ■ After using card, retu rn it to its case. ■ The card is designed so that it can be inserte d only one way .
User ’s Manual 3-23 Hardware, Utilities and Options Figure 3-2 Inserting a memory media Remo vin g a me mor y med ia The following instru ctions apply to all types of supported media device s. T o remove a memory media, follow the steps as detailed below: 1.
User ’s Manual 3-24 Hardware, Utilities and Options Additional mem ory modu le Y ou can install additional memory into th e computer in order to increase the amount of system memory that is avai lable. This section describes how to install and remove optional memory modules.
User ’s Manual 3-25 Hardware, Utilities and Options Point to note about memory module error If you install a memory module that is not compatible with the computer , the Power indicator will flashes (on for 0.
User ’s Manual 3-26 Hardware, Utilities and Options 7. Align the notch of the memory modul e with tha t of the memory module slot and gently insert the module into the slot at about a 45 de gree angle before holding it down until th e latches on either side snap into place.
User ’s Manual 3-27 Hardware, Utilities and Options 8. Seat the memory module cover in place and secure it with one scre w . Figure 3-6 Seating the memory module cover 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Powe r-Up Modes, if required.
User ’s Manual 3-28 Hardware, Utilities and Options 8. Grasp the memory module by its edges and remove it from the computer . Figure 3-7 Removing the memory module 9.
User ’s Manual 3-29 Hardware, Utilities and Options Battery Charger The battery charger provides a convenie nt way to charge up to two Li thium Ion battery packs with out requiring th e use of your computer .
User ’s Manual 3-30 Hardware, Utilities and Options Connecting the USB floppy diskette drive T o connect the drive, plug the floppy diskette drive's USB connector into a computer's free USB ports. Figure 3-9 Connecting the U SB floppy diske tte drive Check the Disk-In-Use indicator whe n you use the floppy diskette drive.
User ’s Manual 3-31 Hardware, Utilities and Options Disconnecting the USB floppy diskette drive When you have finished using the USB floppy diskette drive, you can follow the procedures below in order to disconnect it: 1. W ait for the Disk-In-Use Indicator light to go out to make sure all floppy diskette activity has stopped.
User ’s Manual 3-32 Hardware, Utilities and Options Disconnecting an eSA T A device When you have finished using an eSA T A de vice, you can follow the procedures below in order to disconnect it: 1. W ait for the i ndicator light of an eSA T A device to go out to make sure all activity has stopped.
User ’s Manual 3-33 Hardware, Utilities and Options When you turn on the power , the computer will automatical ly recognize the monitor and determine whether it is a color or monochrome device .
User ’s Manual 3-34 Hardware, Utilities and Options Settings for disp lay video on HDMI T o view video on the HDMI device, be sure to config ure the following settings otherwise you may find that nothing is displayed. Select HD Format T o select the display mode, follow the steps as detailed below: 1.
User ’s Manual 3-35 Hardware, Utilities and Options REGZA Link (PC C ontrol) HDMI out port can connect wi th T ype A connector HDMI cable. One HDMI cable can send and receive video, audio and control signals. HDMI-CEC (Consumer Electronics Control) is a standard in the CE Industry which allows devices to work together over an HDMI cable.
User ’s Manual 3-36 Hardware, Utilities and Options Figure 3-13 Security lock Optional accessories Y ou are able to add a number of options and accessories in orde r to make your computer even more powerful and convenient to use .
User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across i t in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics A V Controll er The following functions are availa ble in this computer for operating the Media Center . This section describes an overview of each function. Please refer to the Chapter 8, A V functions for more information.
User ’s Manual 4-3 Operating Basics Figure 4-2 Web Camera 1. Web Camera LED 2. Web Ca mera 1 2 ■ Do not point the web came ra directly at the sun. ■ Do not touch or press strongly on the web camera lens. Doing so may reduce image quality . Use an eyegla ss cleaner (cleaning cloth) or other soft cloth to clean the lens if it becomes dirty .
User ’s Manual 4-4 Operating Basics Using the T OSHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier .
User ’s Manual 4-5 Operating Basics ■ The Registration screen is displayed for a logged-in user whose face has not be en registered. ■ The Management screen is displayed for a logged-in user whose face has already been registered. 2. Click Run as administr ator in lower left of the Management screen, and then click the Register button.
User ’s Manual 4-6 Operating Basics How to Dele te the Face R ecognition Dat a Delete image data, account information, and personal record data created during registration. T o del ete the Face Recognition Data, follow the steps as described below: 1.
User ’s Manual 4-7 Operating Basics 1:1 Mode Login screen 1. T urn on the comput er . 2. The Select Tiles screen will be displaye d. 3. Select St art face recognition () . 4. The Select Account screen will be displayed. 5. Select the account, and click the arrow button.
User ’s Manual 4-8 Operating Basics Loading discs T o load a disc, follow the steps as detailed below: 1. When the computer ’s power is on, press the eject button to open the disc tray slightly . Grasp the disc tr ay gently and pull until it is fully opened.
User ’s Manual 4-9 Operating Basics 3. Press gently at the center of the disc until you feel it click into place. The disc should li e below the top of the spindle, flu sh with the spindl e base. 4. Push the center of the disc tray to close it. Press gently until it locks into place.
User ’s Manual 4-10 Operating Basics 2. The disc extends slightly over the sides of the disc tray so you ca n grasp it. Gent ly lift ou t the disc. Figure 4-5 Removing a disc 3. Push the center of the disc tray to close it. Press gently until it locks into place.
User ’s Manual 4-1 1 Operating Basics Optical Drive Auto Loc k This function is provided with some mo dels. This function automat ically locks the optical disc drive eject bu tton if the computer detects any vibration or other shocks while running on the battery .
User ’s Manual 4-12 Operating Basics Y ou can use the DVD Super Multi drive to write data to either CD-R, CD- RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM discs. TOSHIBA Disc Creator and Corel DVD MovieFactory are provide d as writing software with this computer .
User ’s Manual 4-13 Operating Basics Given the technological limitations of current opti cal disc writing driv es, you may experience unexpected writing or rewr iting errors due to di sc quality or problems with hardware devices.
User ’s Manual 4-14 Operating Basics Before writing or rewriting with the DVD S uper Mu lti drive ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of.
User ’s Manual 4-15 Operating Basics CD-R: T AIYO YUDEN CO., Ltd. MITSUBISHI KAGAKU MEDIA CO., L TD. Hitachi Maxell,Lt d. CD-RW: (Multi-Speed and High-Speed) MITSUBISHI KAGAKU MEDIA CO., L TD. CD-RW : (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., L TD.
User ’s Manual 4-16 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr i ting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them.
User ’s Manual 4-17 Operating Basics ■ Since the disc is based on the DVD standard, it might be filled with dummy data if the written data is less than about 1GB. Therefore, in these circumstance, even if you writ e only a small amount of data, it might take additional time to fill in the dummy data.
User ’s Manual 4-18 Operating Basics ■ Apply impact or vibration to the computer . ■ Install, remove or connect external devices, including such items as a SD/SDHC memory card, mini SD/microSD C.
User ’s Manual 4-19 Operating Basics ■ Y ou might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media record er .
User ’s Manual 4-20 Operating Basics How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information.
User ’s Manual 4-21 Operating Basics 3. Add source from HDD by clicking Add Video file s button to invoke browser dialog box. 4. Choose the source video and then go to Next page to apply Menu. 5. After choosing the menu template, click the Nex t button to go to the Burning Page .
User ’s Manual 4-22 Operating Basics ■ Do not set the workin g drive to a slow device like a USB1.1 hard disk drive or it will fail to write DVD or Blu-ray disc. ■ Do not perform any of th e following actions: ■ Operate the computer for any ot her function, includin g using a mouse or T ouch Pad, or closing/opening the disp lay panel.
User ’s Manual 4-23 Operating Basics ■ Do not playback DVD discs Video while watching or recording televisio n programs using other applications. Doing so may cause DVD Video playback or television program recording errors.
User ’s Manual 4-24 Operating Basics TOSHIBA DVD PLA YER ■ "TOSHIBA DVD PLA YER" so ftware is supported for playback of DVD- Video and DVD-VR.
User ’s Manual 4-25 Operating Basics 2. T ouch the CD/DVD Play/Pause panel on the Front operation panel. Or select Start -> All Programs -> TOSHIBA DVD PLA YER -> TOSHIBA DVD PLA YER to start "TOSHIBA DVD P LA YER". Operating TOSHIBA DVD PLA YER Notes on Using "TOSHIBA DVD PLA YER".
User ’s Manual 4-26 Operating Basics ■ "WinDVD BD for TOSHIBA" su pports AACS (Advanced Accesss Control System) copy protection techno logy . Renewal of the AACS key integrated into this product is required for uninterrupted enjo yment of Blu-ray Disc.
User ’s Manual 4-27 Operating Basics St arting W inDVD BD for TOSHIBA Use the following procedure to start "WinDVD BD for TOSHIBA". 1. When a Blu-ray disc is set in the BD drive, WinDVD BD for TOSHIBA starts automatically . 2. T ouch the CD/DVD Play/Pause panel on the Front operation panel.
User ’s Manual 4-28 Operating Basics 7. If your CD/DVD/BD's become dusty or di rty , wipe th em with a clean dry cloth from the center hole outwards - do not wipe in a circular direction.
User ’s Manual 4-29 Operating Basics TV T uner Use the My TV feature of W indows Medi a Center to watch TV programs or record them. The dimensions and shape of the TV antenna port vary for different regions. Some models are equip ped with a T V tuner .
User ’s Manual 4-30 Operating Basics 2. Connect the coaxial cable to the TV antenna port of your computer. Figure 4-7 Connecting the coaxial cable Sound system This section describes some of the audio control functions. Adjusting System V olume Y ou can control the o verall level of so und using Windows V olume Mixer .
User ’s Manual 4-31 Operating Basics Realtek HD Audio Manager Y ou can confirm and change the a udio configuration using the Realte k Audio Manager . T o launch th e Realtek Audio Manager , click Star t -> Control Panel -> Hardware and Soun d -> Realtek HD Audio Manager .
User ’s Manual 4-32 Operating Basics Sound Ef fects This section explains how to select various sound effects. ■ Environment - simulates reverb erations of sound for familiar environments around us. Y ou can select an existing preset in th e menu.
User ’s Manual 4-33 Operating Basics Wireless com munications The computer's wireless communicat ion function supp orts both Wireless LAN and Bluetooth devices.
User ’s Manual 4-34 Operating Basics Bluetooth wireless te chnology Bluetooth wireless technology el iminates the need for cables, such as desktop computers, between your PC and other electronic devices, example of printers and mobile phones.
User ’s Manual 4-35 Operating Basics Release Notes related to th e Bluetooth S tack for W indows by TOSHIBA 1. Fax application software: Please be aware that there is some fax application software that you cannot use on this Bluetoo th S t ack.
User ’s Manual 4-36 Operating Basics LAN cable types If you are using Gigabit Etherne t LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CA T5E cable or higher . Y ou cannot use a CA T 3 or CA T5 cable. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE- TX), be sure to connect with a CA T5 cable or higher .
User ’s Manual 4-37 Operating Basics Disconnecting the LAN cab le T o disconnect the LAN cable, follow the steps as detailed below: 1. Pinch the lever on the connector in the computer ’s LAN jack and pull out the connector . 2. Disconnect th e cable from the L AN hub or router in the same manner.
User ’s Manual 4-38 Operating Basics Moving the comp uter While the computer is designed for fl exible day-to -day usage you sh ould exercise a few simple p recautions when moving i t in order to help ensure trouble-free opera tion.
User ’s Manual 4-39 Operating Basics Using the Hard Disk Drive (HDD) Protecti on This computer has a function fo r reduci ng the risk of damag e on the hard disk drive.
User ’s Manual 4-40 Operating Basics Detection Level This function can be set to four leve ls. The sensitivity level s in which vibrations, impacts and their similar signs are detected can be set to OFF , 1, 2 and 3 in ascending order . Level 3 is recommended for better prote ction of the computer .
User ’s Manual 4-41 Operating Basics Using the TO SHIBA USB S leep and Charge Utility This utility displays w hether the USB Sleep and Charge fu nction is enabled or disabled and shows the positions of USB ports that support the USB Sleep and Charge function.
User ’s Manual 4-42 Operating Basics St arting the USB Sleep an d Charge U tility T o start the utility , click Start -> All Programs -> TO S HI BA -> Utilities -> USB Sleep and Charge . Enabling USB Sleep and Charge This utility can be used to enable and disab le the USB Sleep and Charge function.
User ’s Manual 4-43 Operating Basics Power supply mod e settings Y our PC has multiple chargi ng modes so that many different USB devi ces can be supported for USB Sleep and Charge function. T ypical Mode (Default) is suitable for a wide range of digital audio players.
User ’s Manual 5-1 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F9 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys.
User ’s Manual 5-3 The Keyboard Sleep : Pressing FN + F3 switches the system to Sleep Mode. Hibernate : Pressing FN + F4 switches the system to Hibernation Mode. Output : Pressing FN + F5 changes the active display devi ce. Brightness Down : Pressing FN + F6 decreases the computer's display panel brightness in individual steps.
User ’s Manual 5-4 The Keyboard ScrLock: Pressing FN + F12 locks the cursor on a sp ecific line. The power on default is off. Zoom: Pressing FN + Sp ace changes the display resoluti on. ODD: Pressing FN + Ta b turns the power of the optical disc drive on/off or ejects the disc tray .
User ’s Manual 5-5 The Keyboard This key activates the Window s Star t menu. This key has the same function as t he secondary (right) mouse button. Desktop-style Keyboard The Qosmio F60 Series comes with a "desktop-style " keyboard built into it.
User ’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's powe r resources include the AC adaptor , battery pack and any internal batteries.
User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Power conditions cont inued Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be n.
User ’s Manual 6-4 Power and Power-Up Modes Before you remove the battery pack, save your dat a and shut down the computer , or place the computer into Hibernation Mode.
User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash orange to indicate that only a fe w minutes of batte ry power remain.
User ’s Manual 6-6 Power and Power-Up Modes Tim e Refer to User ’s Manual ab out Charging ti me. Battery charging notice The battery may not begin charging immedia tely under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all).
User ’s Manual 6-7 Power and Power-Up Modes Maximizing battery op erating time A battery's usefulness depends on how long it can su pply power on a single charge, while how long the c harg e la.
User ’s Manual 6-8 Power and Power-Up Modes 4. Connect the AC ada ptor to the DC IN 19V jack of the computer , and to a wall outlet that is supplying power .
User ’s Manual 6-9 Power and Power-Up Modes 5. Slide the battery sa fety lock towards the release ( ) position to make the battery release latch movable. Figure 6-1 Releasing the battery pack (1) 6. Slide and hold the battery release latch (1 ) to disengage the battery pack and then remove it from the computer (2).
User ’s Manual 6-10 Power and Power-Up Modes Inst alling the batte ry p ack T o install a battery , follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure that the battery pack is securely in place and the battery safety lock (2) is in its ( ) position.
User ’s Manual 6-1 1 Power and Power-Up Modes ■ Delete (button) Click this button to delete a reg istered password. Before you can delete a password, you must first enter the current password correctly . ■ Change (button) Click this button to change a registered password.
User ’s Manual 6-12 Power and Power-Up Modes St arting the computer by p assword If you have already registered a password, there is one way to start the computer: ■ Enter the password manually . T o enter a password manually , follow the steps as detailed below: 1.
User ’s Manual 6-13 Power and Power-Up Modes Panel power on/off Y ou can set up your compute r so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut D own Mode.
User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup program, cl ick Start -> All Programs -> TO SH IB A -> Utilities -> HWSetup .
User ’s Manual 7-2 HW Setu p Setup This field displays the installed BIOS Version , date and EC Version . Display This tab is supported with some model s. The tab let s you customize your computer ’s display settings for either the internal di splay or an external monitor .
User ’s Manual 7-3 HW Setu p Y ou can override the settings and manually sel ect a boot device by pressing one of the following keys whil e the computer is booting: *1 The floppy diskette drive will be used to start the computer w hen there is a bootable disk contained in the external drive.
User ’s Manual 7-4 HW Setu p Keyboard Wa ke-up on Key board When this feature is enabl ed, and the co mputer is in Sleep Mode, you can turn on the system by pressing any key . However, please be aware that this option will only work with the internal keyboard and onl y when the computer is in Sleep Mode.
User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the computer's power be turned on from shudown when it receives a wake-up p acket (Magic p acket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator ’s computer which is connected via a network.
User ’s Manual 7-6 HW Setu p SA T A Interface setting This feature allo ws you to set SA T A interface setting. USB USB KB/Mouse Legacy Emulat ion Y ou can use this o ption to enable or disable USB .
User ’s Manual 7-7 HW Setu p Illumination Illumination LED This feature allows you to set cond itions of the Illu mination LED . Enabled Enables sound of the front operation panel (Default). Disabled Disables sound of the front operation panel. ON On (Default).
User ’s Manual 8-1 Chapter 8 A V functions This chapter explains how to use the A V functions. Media Center This section describes the Media Center . Windows 7 has the following function. ■ W atch TV or a DVD movie. ■ Pause, rewind, and fast forward TV programs using the Media Center time shifting feature.
User ’s Manual 8-2 A V functions Front operation p anel This section describes the panels of the front operation panel in Windo ws mode. Seven panels are available for use: eco, Wireless On/Off, Programm able button, CD/DVD Play/Pause, Mute, V olume-, V o lume+.
User ’s Manual 8-3 A V functions T OSHIBA Button Support Y ou can update and assign other application s to the operatio n panels using the TOSHIBA Button Support utility .
User ’s Manual 8-4 A V functions 1. In the Button Name list, select o ne of the following panel name such as eco , Programmable button , CD/DVD Play/Pause , Mute .
User ’s Manual 8-5 A V functions 1. Click Advanced . The following di alog box will appear . 2. Select e ither CD/DVD Play/Pause (default) or Play/Pause . ■ If CD/DVD Play/Pause is selected, this panel allows you to launch the corre sponding player app lication according to the type of disc inserted.
User ’s Manual 8-6 A V functions Remote controller A remote controller , which is provided with some models, enables you to perform some functio ns of your computer from a di stant l ocation. Please refer t o Full size remote controller section of this chapter about the function of the button of a remote controller .
User ’s Manual 8-7 A V functions Full size rem ote controlle r Figure 8-2 Full size remote contr oller 16 17 18 19 20 21 22 23 24 25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 26 1. Play 2. Pause 3. Access indicator 4. Power 5. S top 6. Fast Forward 7. Skip 8.
User ’s Manual 8-8 A V functions Figure 8-3 Full size remote contr oller 27 28 29 30 31 23 24 25 1 2 3 4 5 6 7 8 9 26 22 10 18 19 20 21 11 12 13 14 16 17 15 1. Play 2. Pause 3. Access indicator 4. Power 5. S top 6. Fast Forward 7. Skip 8. S ta rt 9.
User ’s Manual 8-9 A V functions Power S t arts or terminates the operating system . This button functions like the Power button of your computer . By default, the Sleep Mode is equivalent to the Power Off state of your computer . T o change the setting, click Start , select Control p anel -> System and Security -> Power Options .
User ’s Manual 8-10 A V functions OK Select s the desired acti on or window opti on. It acts like the ENTER Key . If watching TV in full screen mode, pressing OK switches back to the previous viewed channel. Press again to toggle back. It acts the same way as a Jump button on some TV remote controls.
User ’s Manual 8-1 1 A V functions Using the remote controller Some computers include a remote contro l unit, which allo ws you to control some of your computer ’s functions from a distant location. Operational ran ge of the remote con troller Point the remote controller at your computer and press a button.
User ’s Manual 8-12 A V functions Inst alling/Remo ving batteries Be sure to install the provided AA type batteries before using the remote controller . The procedures for installing a nd removing the batte ries vary depending on the type of the remote con troller .
User ’s Manual 8-13 A V functions Full size rem ote controlle r T ype of battery that can be used for the Full size remote controller When the batteries shipped with the re mote controlle r are discharged, replace them with commercially av ailable AA mang anese batteries or AA alkaline ba tteries.
User ’s Manual 8-14 A V functions Figure 8-7 Closing the battery cover Replacing the batteries When the batteries in the Full size remote controlle r reach the end of their life, the F ull size remo te controller may not operate correctly or work only within a short distance from your computer .
User ’s Manual 9-1 Chapter 9 T roubleshooting TOSHIBA have designed this computer for durability , however , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 9-2 T roubleshooting Preliminary c hecklist Y ou shou ld always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet can cause what appe.
User ’s Manual 9-3 T roubleshooting ■ Do you hear any beeps, if so how many , are they long or short and are they high pitched or low pitched? In addition, is the computer making any unusual noises? Write down w hat you hear . Record your observations so you can describe them in detail to your reseller , dealer or service provider .
User ’s Manual 9-4 T roubleshooting System start- up When the computer does not start pr operly , check the following items: ■ Self T est ■ Power Sources ■ Power-on Password Self test While bo.
User ’s Manual 9-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN indicator . Please refer to Chapter 6, Power and Power-Up Modes for further information.
User ’s Manual 9-6 T roubleshooting Battery doesn’t charge when the AC adaptor is att ached ( Battery indicator does not glow orange). If the battery is complete ly discharged, it will not begin charging immedi ately , in these i nstances you should wait a few minutes before tryi ng again.
User ’s Manual 9-7 T roubleshooting Real Time Clock Password Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information. Problem Pro cedure The following message is Displayed on the screen: RTC Power Failure.
User ’s Manual 9-8 T roubleshooting Internal display p a nel Apparent computer ’s display panel problems may be related to the computer's setup and configuration. Hard disk drive Problem Pro cedure No display Press the FN + F5 hot keys to adjust the display priority , and to make sure it is not set fo r output to an external monitor.
User ’s Manual 9-9 T roubleshooting BD drive For more inform ation, refer to Chapter 4, Operating Basics . Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utili ty to check the condition of your files and the hard disk drive.
User ’s Manual 9-10 T roubleshooting Check the type of CD/D VD/BD you are u sing. The drive supports: BD-ROM: BD-ROM, BD-ROM DL, BD -R, BD-R DL, BD-RE, BD-RE DL DVD-ROM: DVD-ROM, DVD-Video, DVD-R, D.
User ’s Manual 9-1 1 T roubleshooting DVD Super Multi drive For more information, refer to Chapte r 4, Operating Basics . Problem Procedure Y ou ca nnot access a CD/DVD in the drive Make sure the drive’ s disc tray is securely closed. Press gently until it clicks into place.
User ’s Manual 9-12 T roubleshooting USB floppy diskette drive The USB floppy diskette d rive is available o nly as an option. For further information, please refer to Chapter 4, Operating Basics . SD/SDHC memory card, mi niSD/microSD Card For further information, please refer to Chapter 3, Hardware, Utilities and Options .
User ’s Manual 9-13 T roubleshooting Memory S tick/M emory S tick D uo/Mem ory S tick PR O/Memory S tick PRO Duo For further information, please refer to Chapter 3, Hardware, Utilities and Options . xD picture card For further information, please refer to Chapter 3, Hardware, Utilities and Options .
User ’s Manual 9-14 T roubleshooting MultiMediaC ard For further information, please refer to Chapter 3, Hardware, Utilities and Options . Infrared receiver window If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse.
User ’s Manual 9-15 T roubleshooting Double-tapping does not work In this instance, you should initiall y try changing the double-click speed setti ng within the Mouse Control utility . 1. T o access this utility , click Start -> Control Panel -> Hardware and Soun d -> Mouse (under "Devices and Pr inters") .
User ’s Manual 9-16 T roubleshooting USB mouse USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device.
User ’s Manual 9-17 T roubleshooting USB Sleep and Charge function For more informa tion and settings, please refer to the Using the TOSHIBA USB Sleep and Charge Utility section in Chapter 4, Operating Basics.
User ’s Manual 9-18 T roubleshooting eSA T A device In addition to the information in this section, p lease also refer to the documentation supplied with your e SA T A device. The battery depletes quickly even when I turned OFF the power of the computer .
User ’s Manual 9-19 T roubleshooting Additional mem ory modu le Please also refer to Chapter 3, Hardware, Utilities and Options , for further information on installing and removing memory modules. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device.
User ’s Manual 9-20 T roubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information. Check to make sure the headphone connection is secure.
User ’s Manual 9-21 T roubleshooting LAN No display Try adjusting the contrast and brightness controls on the external monitor . Press the FN + F5 hot key in order to change the display priority and ensure th at it is not set for the internal display panel only .
User ’s Manual 9-22 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics .
User ’s Manual 9-23 T roubleshooting Video Playback If you turn the co mputer off into Sleep Mode whi le the display is on HDMI monitor , the computer will select eit her the internal LCD or an external computer CRT as the display device the next time is turned on.
User ’s Manual 9-24 T roubleshooting Recovery Media T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act T OSHIBA for additional techni cal assistance.
User ’s Manual 9-25 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia TOSHIBA Australia Pty .
User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Refer to User ’s Manual about Size.
User ’s Manual A-2 S pecifications Power Requirement s AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 19 VDC 6.32 amperes.
User ’s Manual B-1 Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Form Factor PCI Express Mini Card Compati bility ■ IEEE 802.1 1 S tandard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.
User ’s Manual C-2 Wireless LAN Radio Characteristics Radio Char acteristics of Wireless LAN modules ma y vary according to: ■ Country/region where the product was purcha sed ■ T yp e of product Wireless communication is often subject to local radio regulations.
User ’s Manual C-3 Wireless LAN Supported Freque ncy Sub-bands Subject to the radio regulatio ns that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.
User ’s Manual C-4 Wireless LAN ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN module will automatically start operation at the ch annel identified by the Wireless LAN Ac cess Point. When roamin g between different access points the station can dynamically switch to another channel if requ ired.
User ’s Manual C-5 Wireless LAN * The approved channels on using are diff erent at each coun try or region. When using these chan nels in any country or re gion, refer to the add endum sheet which is Appr oved Countries/Regions for use .
User ’s Manual D-1 Appendix D Bluetooth wireless technology Interoperability Bluetooth Adaptor from TOSHIBA ar e designed to be interoperable with any product with Bluetooth wireless te chnology that is based on F requency Hopping S pread S pectrum (FHSS) radio technology , a nd is compliant to: ■ Bluetooth S pecification V er .
User ’s Manual D-2 Bluetooth wireless technology Interoperability Bluetooth w ireless techno logy and your Health The products with Bluetooth wireless te chnology , like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual D-3 Bluetooth wireless technology Interoperability L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (.
User ’s Manual D-4 Bluetooth wireless technology Interoperability Ta i w a n Using Bluetooth Adaptor from T OSHIBA equipment in Jap an In Japan, the frequency bandwidth of 2,400 - 2,483.
User ’s Manual D-5 Bluetooth wireless technology Interoperability (1) 2.4 : This equip ment uses a frequency of 2 .4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1: The interference range of this equi pment is less than 10 m. (4) This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.
User ’s Manual E-1 Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Length: Minimum 1.
User ’s Manual E-2 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV -F .
User ’s Manual F-1 Appendix F T OSHIB A Anti-thef t Protection Ti mer This feature allows you to set up a ti mer-activated BIOS password that will prevent unauthorised system a ccess in the event of theft.
User ’s Manual G-1 A ppendix G T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power c onsumption and battery health, informing you of significa nt system conditions.
User ’s Manual G-2 TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor software does not extend or modify T oshiba's obligations under its standard limited warranty in any way . T oshiba's standard limited warranty terms and limitations apply .
User ’s Manual G-3 TOSHIBA PC Health Monitor Cleaning the cooling module This section explains how to clean the Cooling module. T o clean the coolin g module, follow the steps as detailed bel ow: 1.
User ’s Manual G-4 TOSHIBA PC Health Monitor 7. Lift up the back of the keyboard, rotate it toward you and lay in face down on the palm rest. Figure G-3 Rotating the keyboard 8. Lift the plastic film and clean the cooling module using a vacuum cleaner or other cleaning tool.
User ’s Manual G-5 TOSHIBA PC Health Monitor 9. Insert the tabs on the front of the keyboard into the corresponding notches on th e computer and pl ace the keyboard d own. 10. Replace the keyboard and secure it usi ng the three screws. 1 1. Set the keyboard brace into its groove and hold down to secure the latches.
User ’s Manual H-1 A ppendix H Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manu al, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) rel ated to this comput er are marked wit h a blue *XX in this manual.
User ’s Manual H-2 Legal Footnotes ■ use of computer at temperatures out side the range of 5°C to 30°C (41°F to 86°F) or >25°C (77°F) at hi gh altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to you r computer documentation or visit the T oshiba website at www .
User ’s Manual H-3 Legal Footnotes Battery Life *4 Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts.
User ’s Manual H-4 Legal Footnotes Wireless LAN *8 The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurati ons.
User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC.
User ’s Manual Glossa ry-2 Glossary IDE: integrated drive e lectroni cs IEEE: Institute of Electrical and Electronics Engineers I/O: input/ou tput IrDA : Infrared Data Association IRQ: interrupt req.
User ’s Manual Glossa ry-3 Glossary analog signal: A signal who se characteristics such as amplitude an d frequency vary in proportion to (are an analog of) the value to be transmitted.
User ’s Manual Glossa ry-4 Glossary byte: The representation of a single cha racter . A sequence of eight b its treated as a single unit; also the smallest addressa ble unit within the system. C cache memor y: A section of very fast memory in which frequently used information is duplicated for quick access.
User ’s Manual Glossa ry-5 Glossary components: Elements or part s (of a system) which make up the whole (system). Composite V ideo (YUV): A standard video signal used to transmit images, e.g. fr om a VCR to a TV . computer program : A set of instructions written for a computer that enable it to achieve a desired result.
User ’s Manual Glossa ry-6 Glossary Digital Audio: An audio comp ression standard that enable s high-quality transmission and real-time pl ayback of sound files. disk drive: The device that randomly accesses information on a disk and copies it to the comp ut er ’s memory .
User ’s Manual Glossa ry-7 Glossary escape: 1) A code (ASCII code 27), signalin g the computer that what follows are commands; used with periphe ral devices such as printers and modems.
User ’s Manual Glossa ry-8 Glossary H hard disk: A storage device composed of a ri gid platter or pla tters that ca n be magnetically coded with data. Hard disks hold much more information than diskettes and are used fo r long-term storage of programs and data.
User ’s Manual Glossa ry-9 Glossary K K: T aken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power . See also b yte and kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys.
User ’s Manual Glossary-10 Glossary microprocessor: A hardware compon ent contained in a single integrated circuit that carries out instructions. Also called the central processing unit (CPU), one of the main parts of the computer . mode: A method of operation, for exam ple, the Shut Down Mode, Sleep Mode or the Hiberna tion Mode.
User ’s Manual Glossary-1 1 Glossary P PA L : P AL (Phase Alternating Line ) is the dominant video and broadcas ting standard in Europe. pa r it y: 1) The symmetrical relationship between two parameter values (integers) both of which are either o n or off; odd or even; 0 or 1.
User ’s Manual Glossary-12 Glossary Random Access Memory (RAM): V olatile memory that can be written to as well as read. V olatile here means that information in RAM is lost when you turn off your computer. This type of memory is used for your computer's main memory .
User ’s Manual Glossary-13 Glossary system disk: A diskette that contains the operating system files ne eded to start the computer . Any diskette can be formatted as a system disk. A system disk is also called a "b oot able disk", "boot disk" or a "startup dis k.
User ’s Manual Glossary-14 Glossary W warm start: Rest arting or resetting a co mputer with out turning it off. Wi-F i: A registered trademark term of th e Wi-Fi Alliance th at stands for Wireless Fidelity , and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
User ’s Manual Index-1 Index A AC adaptor 3-3 DC IN 19V jack 2-5 additional 3-36 connecting 1-4 ASCII characters 5-5 B Battery Monitoring capacity 6-6 charging 6-5 extending battery life 6-7 indicat.
User ’s Manual Index-2 Qosmio F60 Series FN + F9 (Touch Pad) 5-3 FN + space (Zoom) 5-4 Front operation panel 8 -2 Function keys 5-2 G Getting Started 1-3 Graphics controller 3-7 H HDD Protection 4-3.
User ’s Manual Index-3 Qosmio F60 Series O Optical Drive Auto Lock 3-12 P Password power on 3-11 problems 9-7 starting the computer by 6-12 supervisor 6-11 user 6-10 Pointing device Touch Pad 2-9, 4.
User ’s Manual Index-4 Qosmio F60 Series Sleep Mode 3-13 System automati c 3-11 setting 1-9 Sound system 3-8, 4-30 Headphone, S/PDIF and Line out jack 2-4, 3-9 Microphone and Line in jack 2-4, 3-9 S.
Ein wichtiger Punkt beim Kauf des Geräts Toshiba F60 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Toshiba F60 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Toshiba F60 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Toshiba F60 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Toshiba F60 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Toshiba F60 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Toshiba F60 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Toshiba F60. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Toshiba F60 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
