Benutzeranleitung / Produktwartung 100EU des Produzenten Teledyne
Zur Seite of 86
ADDENDUM TO MODEL 100E OPERATORS MANUAL (P/N 04515) FOR MODEL 100EU TRACE LEVEL SULFUR DIOXIDE ANALYZER 9480 CARROLL PARK DRIVE SAN DIEGO, CA 92121-5201 USA Toll-free Phone: 800-324-5190 Phone: 858-657-9800 Fax: 858-657-9816 Email: Api-sales@teledyne.
.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 TABLE OF CONTENTS 05944 Rev B 1 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED TABLE OF CONTENTS 1. PREFACE ..........................................................
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TABLE OF CONTENTS Addendum to M100E Manual - P/N 04515 2 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 LIST OF FIGURES Figure 3-1: M100EU Inter nal Layout ...................................
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 PREFACE 05944 Rev B 3 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 1. PREFACE NOTE The information contained in this add endum is pertinent to M100EU analy zers running software revision F.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL PREFACE Addendum to M100E Manual - P/N 04515 4 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 SPECIFICATIONS, APPROVALS AND W ARRANTY 05944 Rev B 5 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 2.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL SPECIFICATIONS, APPROVA LS AND WARRANTY Addendum to M100E Manual - P/N 04515 6 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 2.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 GETTING STARTED 05944 Rev B 7 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 3. GETTING STARTED 3.1 UNPACKING THE M100EU Unpack the M100EU as p er the directions in Section 3.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL GETTING STARTE D Addendum to M100E Manual - P/N 04515 8 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 3.3 FUNCTIONAL CHECK OF THE M100EU To perform an initial functional check of the M100EU fo llow the steps contained in Section 3.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 GETTING STARTED 05944 Rev B 9 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED Table 3-1: Test Functions Defined DISP.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL GETTING STARTED Addendum to M100E Manual - P/N 04515 10 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 FREQENTLY ASKED QU ESTIONS & GLOSSA RY 05944 Rev B 11 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 4. FREQENTLY ASKED QU ESTIONS & GLOSSARY Please refer to Section 4 of the M100E manual, PN 0 4515 for information.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL FREQUENT LY ASKED QUESTIONS & GLOSSA RY Addendum to M100E Manual - P/N 04515 12 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTE.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 OPTIONAL HARDWA RE AND SOFTWARE 05944 Rev B 13 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 5. OPTIONAL HARDWARE AND SOFTWARE Please refer to Section 5 of the M100E manual, PN 0 4515 for information.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL OPTIONAL HARDWARE AN D SOFTWARE Addendum to M100E Manual - P/N 04515 14 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04515 M100EU OPERATING INSTRUCTIONS 05944 Rev B 15 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 6.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL M100EU OPERATING INSTRUCTIONS Addendum to M100E Manual - P/N 04515 SET UP X.X PRIMARY SETUP MENU CFG DAS RNGE PASS CLK MO RE EX IT SETUP X.X SEC ON D A R Y S ET U P ME NU COMM VAR S DIAG STBL SAMPL E RAN GE = 50 0.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 CALIBRATION PR OCE DURES 7. CALIBRATION PROCEDURES Calibration of the M100EU sho uld be performed according to the procedures described in Chapters 7 & 8 of the M100E Manual - P/N 04145.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL CALIB RATION PROCE DURES Addendum to M100E Manual - P/N 04515 18 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 EPA PROTOCOL CALIBRATION 8. EPA PROTOCOL CALIBRATION The M100EU is designated as an equiv alent method fo r measuring SO2 under certification EQSA-0495-100. Calibration of the M100EU is done so in a manner that is consistent with EPA requirements.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL EPA PROTOC OL CALIBRATI ON Addendum to M100E Manual - P/N 04515 20 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 INSTRUMENT MAINTENANCE 9. INSTRUMENT MAINTENANCE Instrument maintenance is almost identical to that in the M100E. T he M100EU uses a 1 micron sample filter, instead of the 5 micron sample filter used in the M100E.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL INSTRU MENT MA INTENANCE Addendum to M100E Manual - P/N 04515 22 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 THEORY OF OPERATION 10. THEORY OF OPERATION The M100EU is a modified M100E. The primary differ ences are the way in which the PMT and UV reference signals are acquired a nd processed.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL THEORY OF OPERATION Addendum to M100E Manual - P/N 04515 PMT HOUSING Reaction Cell Sample Gas Outlet Sample Gas Inlet PMT PREAMP PC A Lamp Shutter Hou.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 THEORY OF OPERATION UV Source Lamp Shutter Housin g UV Sou rce Le ns & Housing PMT Lens & Housin g Sample.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL THEORY OF OPERATION Addendum to M100E Manual - P/N 04515 26 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 User Notes:.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 11. TROUBLESHOOTING & REPAIR This section include s various troubleshooting and.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 Table 11-1: Test Functions - Possible Caus es for Out-Of-Range Values TEST FUNCTION .
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 11.1.3 FAULT DIAGNOSIS WITH SYNC DEMOD PCA LEDS There are four green Light Emitting Diodes (LE Ds) on t he bottom left side of the Sync Demodulator PCA.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 The UV outpu t level of the lamp is not even across the entire length of the lamp. Some portions of the lamp shine slightly more brightly than other s.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR Figure 11-1: UV Lamp Adjustment 4.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 11.3.1.2 Replacing the UV Lamp 1. Turn off the analyzer.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 11.3.2 REPLACING THE UV FILTER/LENS Note: Be careful not to leave thumbprints on the interior of the sample chamber.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 11.3.3 REPLACING THE PMT, HVPS OR TEC The PMT should last for the lifetime of the analyzer. Ho wever, in some cases, the high voltage power supply (HVPS) or the thermo-electric cool er (TEC) may fail.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR Because the threads of the plastic screws are ea sily da maged it is highly recom mended to use new screws when reassembling the unit.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 11.3.4 M100EU PMT HARDWAR E CALIBRATION ( FACTORY CAL ) THIS PROCEDURE SUPER SEDES THE ONE CONTAINED IN SECTION 11.6.3 OF THE M100E MANUAL - P/N 04145.
M100EU – OPERATIONS MANUAL TELEDYNE INSTRUMENTS Addendum to M100E Manual - P/N 04145 TROUBLESHOO TING & REPAIR 05944 Rev B 37 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 11.
TELEDYNE INSTRUMENTS M100EU – OPERATIONS MANUAL TROUBLESHOOTING & REPAIR Addendum to M100E Manual - P/N 04515 38 05944 Rev B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 USER NOTES:.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Softw are Documentation 05928 Rev F.0B Pg: A-1 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A - Version Speci.
TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-2 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 APPENDIX A-1: M100E Software Menu Trees, Revision F.
TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-3 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED ZE RO SPAN CO N C SAM PL E <TST TS T> RAN G E ST A B IL ST A B IL2 PR E S SAM P F L PM T NO R M P MT UV LA M P UV S T B LA M P R A T I O ST R .
TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-4 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 LO W HI G H ZE R O SP.
TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-5 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED CFG MODEL NAME .
TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-6 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 NAME EVENT PARAMETERS REPORT PERIOD NUMBER OF R ECORDS RS-232 REPORT CHANNEL ENAB LE CAL.
TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-7 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED QUIET COMPUTER SECU RIT Y .
TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-8 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 INSTRUMEN T IP 5 GATE.
TELEDYNE INSTRUMENTS APPENDIX A-1: M100E Software Menu Trees, Revision F.0B Model 100E Instruction Manual 05928 Rev F.0B PG: A-9 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED .
TELEDYNE INSTRUMENTS APPENDIX A-1: M100EU Software M enu Trees, Re vision F.0B Model 100EU Instruction M anual Pg: A-10 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 4) SAMP LE LED 5) CA.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-11 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A-2: Setup Variables For Serial I/O, Revision F.0B Table A-1: M100EU Setup Variables, Revision F.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-12 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 0.2 4 sample. FILT_SIZE Samples 240, 30 3 , 5 4 1–480 Moving average filter size.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-13 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED O2_FILT_DELT A 10 % 2 0.1–100 Absolute change in O 2 concentration to shorten filter.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-14 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 DARK_MOD E 5 — AUT O OFF, AUTO, CMND Dark calibration mode. OFF disables it; AUTO does it periodically; CMND do es it only when commanded.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-15 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED AUTO2 PHYS_RANGE1 PPM 2, 500 3 0.1–2500, 5–10000 3 Low pre-amp range. PHYS_RANGE2 PPM 22, 5500 3 0.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-16 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 RS232_MODE BitFlag 0, 3 5 0–65535 RS-232 COM1 mode flags. Add values to combine flags.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-17 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 19200, 38400, 57600, 115200 MODEM_INIT2 — “AT Y0 &D0 &H0 &I0 S0=2 &B0 &N6 &M0 E0 Q1 &W0” Any character in the allowed character set.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-18 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 RCELL_PROP 1/ºC 0.3 (prop. band = 3.3 ºC) 0–10 Reaction cell temper ature PID proportional coefficient.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-19 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED DIM I2C_RESET_ENABLE — ON OFF, ON I 2 C bus automatic reset enabl e. CLOCK_FORMAT — “TIME=%H:% M:%S” Any character in the allowed character set.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-20 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 2048 = enable Internet option 4096 = enable pre-am plified UV lamp monitoring 1 M100E.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-21 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A-3: Warnings and T est Functions, Revision F.0B Table A-2: M100EU Warning Messages, Rev ision F.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-22 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 Table A-3: M100EU Test Functions, Revision F.0B Name 1 Message Text Description RANGE RANGE= 500.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-23 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED calibration. HVPS HVPS=650 VOLTS High voltage power supply output. RCELLDUTY RCELL ON=0.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-24 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 APPENDIX A-4: M100Eu Signal I/O Definitions, Revision F.0B Table A-4: M100EU Signal I/O Definitions, Revision F.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-25 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED Control outputs, U21, J1008, p.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-26 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 MAINT_MODE 5 (inp ut) 0 = main.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-27 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED AGND_DARK 3 7 AGND reading dur.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-28 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 TEST_ OU TPUT, DATA_OUT_4 3 Test measurement output, Data output #4 I 2 C analog output (A D5321 ), default I 2 C address 18 hex LAMP_POWER 5 0 Lamp power (0–5V) 1 Optional.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-29 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED M100E MODBUS Register Map MODBUS Register Address (dec.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-30 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 102 10 O 2 concentration durin.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-31 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED 100 10 In O 2 calibration mode.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-32 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 APPENDIX A-5: M100EU iDAS Functions, Revision F.0B Table A-5: M100EU DAS Trigger Events, Revision F.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-33 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED SLOPE2 SO 2 slope for rang e #.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-34 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 1 M100E. 2 M100E H. 3 M100E U. 10 O 2 option. 11 CO 2 option. 12 SO 2 with O 2 correction option.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation 05928 Rev F.0B A-35 DCN 5063 PRINTED DOCUMENTS ARE UN CONTROLLED APPENDIX A-6: Terminal Command Designators, Rev ision F.0B Table A-7: Terminal Command Designators, Rev ision F.
TELEDYNE INSTRUMENTS Model 100EU Instruction Manual APPENDIX A - Version Specific Software Documentation A-36 05928 Rev F.0B PRINTED DOCUMENTS A RE UNCONTROLLED DCN 5063 The command syntax follows the command type, sep arated by a space character. Strings in [brackets] are optional designators.
MODEL M100EU INSTRUCTION MANUAL Appendix B - Spare Parts Lists APPENDIX B - SPARE PARTS LISTS • 053600100 – M100EU Spare Parts List • 059460000 – M100EU Recommended Spares Stocking Levels 0592.
Appendix B - Spare Parts Lists M ODEL M100EU INSTRUCTION MANUAL B-2 05929 Rev. A.
M100EU Spare Parts List Part Numbe r Description 000940100 ORIFICE, 3 MIL, IZS 000940800 ORIFICE, 012 MIL, RXCELL 002690000 LENS, UV 002700000 LENS, PMT 002720000 FILTER, PMT OPTICAL, 330 NM 003290000.
M100EU Spare Parts List Part Numbe r Description 055560000 ASSY, VALVE, VA59 W/DIODE, 5" LEADS 055920000 ASSY, SO2 SENSOR, M100EU (KB) 055930100 DOC, W/SOFTWARE, M100EU 056080000 ASSY, HVPS, M100.
Teledyne Advanced Pollution Instrumentati on UNITS PA RT NO DESCRIPTION 1 2-5 6-10 11-20 21-30 000940800 Orifice, 12 Mil 1 2 4 4 002720000 Filter, 330 NM 1 2 3 013140000 Cool er Fan 1 1 2 4 4 01340000.
THIS PAGE IS INTENTIONALLY LEFT BLANK.
Model 100EU Instruction Manual Add end um Appendix C – Warranty Repair Questio nnaire 05930 Rev A C-1 Appendix C – Warranty Repair Questionnaire CUSTOMER: _______ _______________ ___________ PHON E: _____________ __________________ _______________ ____ CONTACT NAME: __________ _______________ ___ FAX NO.
Model 100EU Instruction Manual Addendum Appendix C – Warranty Repair Question nair e C-2 05930 Rev. A 3. WHAT IS TH E SAMPLE FLOW & S AMPLE PRESSURE W/SAMPLE INLET ON REAR OF MACHINE CAPPED ? SAMPLE FLOW - CC SAMPLE PRESS - IN-HG-A 4.
M100EU Manual Addendum Appendix D – Schematic Lis t Appendix D – Schematic List Table D-1: List of In cluded Electronic Schematics DOCUMENT # DOCUMENT TITLE 0506402 M100E U UV Ref PCA 05435 M100EU.
Appendix D – Schematic List M100EU Manual Addendum D-2 05931 Rev. A.
Ein wichtiger Punkt beim Kauf des Geräts Teledyne 100EU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Teledyne 100EU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Teledyne 100EU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Teledyne 100EU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Teledyne 100EU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Teledyne 100EU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Teledyne 100EU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Teledyne 100EU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Teledyne 100EU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
