Benutzeranleitung / Produktwartung BWE41BL des Produzenten Baumatic
Zur Seite of 28
BWE41BL 40 Bottle electronic wine cooler.
USER MANUAL FOR YOUR BAUMATIC BWE41BL 40 Bottle electronic wine cooler NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance.
3 Contents E n v i r o n m e n t a l n o t e 4 Important safety informa tion 5 – 6 Specifications of your wine cooler 7 D e s c r i p t i o n o f t h e a p p l i a n c e 8 C o n t r o l p a n e l 9 .
Environmental note Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertake n by a competent person.
Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of th e information contained in this booklet, please contact the Baumatic Advice Line.
Child safety o Packaging material should be kept away from children. o Children should not be allowed to touch the controls or play with the appliance. General safety o Do not pull on the power supply cable to remove the plug from your mains supply socket.
7 Specifications of your wine cooler Congratulations on purchasing a Baumatic wine cooler o Gross capacity: 132 litres o Net capacity: 126 litres o Bottle capacity: 40 x 0.
Description of the appliance 1) Control panel and LED display 2) Cabinet 3) Temperature sensor 4) Adjustable feet 5) Chrome racks 6) Door seal 7) Chrome shelves 8) Door 9) Interior light Please note that the above image shows the correct configuration of the shelving inside of the wine cooler.
Control panel The control panel is located at the top of the appliance, behind the glass door. A) Temperature increase button B) Temperature decrease button C) Light ON/ OFF button D) Wine type indica.
10 o If you are trying to store a mixture of wine types in the appliance, we would recommend th at red wines are stored at the top of the cooling zone, white wi nes in the middle of the cooling zone and sparkling wines at th e bottom of the cooling zone.
Using your Baumatic wine cooler Before switching on o Make sure that it has been installed by a suitably qualified person, as per the information contained in Baumatic’s installation instructions. o After delivery, wait for eigh t hours before connecting the appliance to your mains supply.
Switching on the appliance and setting the temperature o When the appliance is connected to your mains supply, the temperature LED display (E) will show the factory pre-set temperature of +12°C. o Use the temperature increase (A) and temperature decrease (B) buttons to set the temperature th at you require.
o You cannot change the display if you are in the process of adjusting the temperature of the c ooling zone (i.e. the display is flashing). Interior light o To operate the interior light, you should use the light ON/OFF button (C) . You cannot operate the interior light if you are in the process of adjusting the temperature of a coo ling zone (i.
14 o Temperature stability is the most important factor when it comes to storing wine. o Exposure to light, vibrations or fluctuations in temperature and humidity can all cause wine to spoil. When properly stored, wines not only maintain their quality but many will actually improve in aroma, flavour and complexity as they mature.
15 Wine storage problems Corking - a tiny percentage of bottled wine (about 1%) will suffer from this. The cork reacts with the wine and gives it a musty, unpleasant taste. It is the most common wine storage problem and is caused by harmless bacteria growing on the cork.
Cleaning and maintenance WARNING: PLEASE ENSURE THAT YOUR APPLIANCE IS DISCONNECTED FROM YOUR MAINS SUPPLY BEFORE ATTEMPTING TO CLEAN IT . o Do not clean the appliance by pouring water onto it or spraying water over it. o The interior of the wine cooler should be cleaned periodically, using a solution of bicarbonate of soda and lukewarm water.
Defrosting o Defrosting occurs automatically in side of the wine cooler during operation. The defrost water is co llected by the evaporating tray and evaporates automatically. o The evaporating tray and defrost water drain hole should be cleaned periodically.
o Remove the upper hinge cover (1) . o Use a screwdriver to remove the two screws (2) holding the upper hinge (3) to the right hand side of the housing. o Carefully lift up the door and place it on a soft surface to protect it from scratches. o Use a suitable pointed tool to remove the covers for the screw holes (12) .
which are necessary for normal use and the regular operation of the electric system. Electrical connection YOUR WINE COOLER IS INTENDED FOR FITTED AND PERMANENT INSTALLATION. We recommend that the appliance is connected by a qualified electrician, who is a member of th e N.
20 Climate classification Appropriate ambient temperature SN +10 to +32 degrees centigrade N +16 to +32 degrees centigrade ST +18 to +38 degrees centigrade T +18 to +43 degrees centigrade o Positioning the appliance requires two people in order to avoid injuries or damage to the appliance.
Troubleshooting IMPORTANT: If your wine cooler a ppears not to be operating properly, before contacting the Baumatic Service Department, please refer to the checklist below. PROBLEM POSSIBLE CAUSE Appliance does not operate Not plugged in. The circuit breaker has tripped or the fuse has blown.
F1 indicates that the thermostat is faulty. You shou ld contact the Baumatic Service Department to arrange an engineer visit. IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your mains supply and then contact the Baumatic Service Depa rtment on telephone number (0118) 933 6911.
United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900 Sales Fax (0118) 931 0035 Customer Care Telephone (0118) 933 6911 Customer Care Fax (0118) 986 9124 Spares Telephone (01235) 4372 44 Advice Line Telephone (0118) 933 6933 E-mail: sales@baumatic.
.
25.
.
27.
28 28.
Ein wichtiger Punkt beim Kauf des Geräts Baumatic BWE41BL (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Baumatic BWE41BL noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Baumatic BWE41BL - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Baumatic BWE41BL reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Baumatic BWE41BL erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Baumatic BWE41BL besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Baumatic BWE41BL verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Baumatic BWE41BL. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Baumatic BWE41BL gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
