Benutzeranleitung / Produktwartung ClickShare Link des Produzenten Barco
Zur Seite of 114
Cl i ckS h a r e Installation Guide R5900004/06 23/12/2014.
Barc o nv President Kennedypark 35, 8 500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.bar co.com/esupport Visit us at the web: www.
Changes Barco provides this manua l ’as is’ w ithout warranty of any kind, either e xpressed or implied, including but not limited to the implied w ar- ranties or m erchantability and fi tness for a particular purpose.
4. Barco shall hold you harmless, defend and indemnify you from and against d irect damages, losses and ex penses arising from in- fringement or alleged infringement of any patent, trademark or c opyr.
9. This Softw are License is the only understanding and agreem ent between you and Bar co for use of the Software by you and/or A utho- rized U sers. The Software Licen se supersedes all other communi.
EACH SEP ARA TE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELA TED DOCUMENT A TION ARE PROVIDED "AS IS" WIT H - OUT EXPRESS OR IMP LIED WARRANTY INCLUDING, B UT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPO SE.
Open Source component Open Sou rce Licens e e2fsprogs http:// www.gnu.or g/licenses/old-licenses/l gpl-2.1.html eglibc http:// www.gnu.or g/licenses/lgpl.html ethtool http:// www.gnu.or g/licenses/lgpl.html gdbserver http:// www.gnu.or g/licenses/lgpl.
Open Source component Open Sou rce Licens e libpixman-1-0 http:// changelogs.ubuntu.com/changelogs /pool/main/p/pixman/pixman_0.10.0- 0ubuntu1/libpixman-1-0.copyright libpng12-0 http:// www.li bpng.org/pub/png/src/libpng-LICENSE.txt libpopt0 http:// opensource.
Open Source component Open Sou rce Licens e ttf-dejavu-sans-mono ttf-dejavu-sans ttf-sazanami-gothic ttf-sazanami-mincho ttf-un-fonts udev http:// www.gnu.or g/licenses/old-licenses/gpl- 2.0.html update-modules http:// www.gnu.or g/licenses/old-licenses/gpl- 2.
Federal Communication Commission Interference Statement Y ou are cautioned that changes or modi fi cations not expressly approved by the part responsible for compliance could void the user ’s authority to operate the equipment.
Canada, avis d’lndustry Canada ( IC) Le présent appa reil est con forme aux CNR d’Industrie Canada applicables aux appareils r adio exempts de licence.
.
Tabl e of cont ents T ABLE O F CON TENTS 1 . I n t r o d u c t i o n t o t h e I n s t a l l a t i o n G u i d e ... ...... ........ ...... ........ ...... ...... ........ ...... ...... ........ ... 3 1 . 1 A b o u t t h i s G u i d e ................
Tabl e of cont ents 6 . 3 5 A d m i n i s t r a t o r p a s s w o r d ................... ...................... .............................. ....................... ............... 8 7 6 . 3 6 I n t e g r a t o r p a s s w o r d ...................
1. Introd uction to t he Installatio n Gu ide 1. INTRODUCTION TO THE INST ALLA TION GU IDE In this section you get a short introduction to the available ClickShare documentation. • About this Guide • About the doc umentation • Symbols and fonts 1.
1. Introdu ction to the Installat ion G uide 1.3 Symbols and fonts Symbol overview The following icons ar e used in the manual : Caution Warn in g Info, term de fi nition.
2. ClickSha re Specifi cations 2. CLICKSHARE SPECIFICA TIONS About this chapter It gives a n overview the speci fi cations of a ClickSh are s et and of the different compo nents in the set.
2. ClickSha re Specifi cations Regional versi on Contain s Accessories included R9861005EU • R9861006B EU • 4x R9861006D01 • R9861006T01 • power cables CEE7 and BS 1363 • wall/ceiling mounti.
2. ClickSha re Specifi cations Lifeti me MTBF = 40,000h (90% con fi dence level) MTBF = 100,000h (60% con fi dence level) MTBF conditions: • Environment: Ground Benign • T emperature: 25°C • .
2. ClickSha re Specifi cations Warranty 3 years standard System requirements PC minimum requirements: CPU: Intel Pentium Dual Core E2140 – 2 * 1600 Mhz (or equivalent: AMD A thlon 64 X2 3800+ - 2 * .
2. ClickSha re Specifi cations Front layout of the Base Unit At the front of the B ase Unit you can fi nd a standby button, status LED strips and a USB port. 2 1 3 2 Image 2-3 Base Unit 1 USB port 2 Status LED s trip 3 Standby button Ta b l e 2 - 3 USB port The USB port is used to update the software of both the Base Uni t and the Buttons.
2. ClickSha re Specifi cations • When the system is awake, a short push triggers the system to go into standby mode. • When the sy stem is in standby mode, a short push triggers the system to w ake up. • When the system is powere d on, a long push mak es the system to s hut down and power off .
2. ClickSha re Specifi cations Antenna type : Dipole Gain : Maximum 2dBi peak gain in 2.4GHz and 5Ghz band V entilation grids V entilation grids are foreseen on the top and both sides of the B ase Unit. Image 2-5 V entilati on grids IN and OUT The Base unit sucks air via the top ventilation grid and push hot air out on both sides.
2. ClickSha re Specifi cations 1 2 3 Image 2-6 Butto n layout 1 USB connector 2B u t t o n 3L E D r i n g Ta b l e 2 - 6 USB conne ctor Using the US B connector the Button can be plugge d into a laptop (for sharing your screen) or the B ase Unit (for pairing the Button to the Base U nit or updating its software).
2. ClickSha re Specifi cations Handle the Button cable w ith care. Rough handling might cause defects. 2.6 About the T ray T ray layout The function of the Tray is to hold the Buttons on the table after the m eeting is fi nished. The Tray can hold up to 5 Buttons.
2. ClickSha re Specifi cations App Used on Logo ClickShare Presenter iOS Android MirrorOp Sender for Galaxy Galaxy mobile devices 14 R5900004 CLICKSHA RE 23/12/2014.
3. Getting star ted 3. GETTING ST ARTED Overview • Environmental Condition Check •B a s i c W o r k fl ow 3.1 Environme ntal Condition Check Environment condition c h eck A device must always be mounted in a manner which e nsures both air inlets an d outlets are free.
3. Get ting started ClickShare is ready to be used. For more infor m ation on using ClickShare, refer to the ClickShare U ser Guide (R5900001). This m anual can be found on Barco’s website w ww.barc o.co m/cl icks hare Click on Visit the C lickS hare product page a n dg ot ot a b Downloads .
4. ClickSh are installation 4. CLICKSHARE INST ALLA TION About this chapter The installation chapter gives an overview of the different ways to install the base unit of ClickShare, the possible connections and the use of ClickShare Link for an iPad connection.
4. ClickSha re inst allati on The antennas are removable. They can be fi xed to the B ase U nit depending on the way the Bas e Unit is installed in the room. The antennas can rotate for better wireless connection. Using extension cables for the antennas is allowed, but this can reduce the perform ance.
4. ClickSh are installation 173mm Image 4-1 4. T o mount the B ase unit on the wall, h ook the slots in the b rackets over the 2 screws in the wall (front side of the Base unit directed toward s the ceiling or the fl oor) and pull it downward until it is secured.
4. ClickSha re inst allati on Necessary part s • Mounting brackets (included in the ClickShar e box) • 4 mounting screws and corresponding screwdriver (not included) How to install 1.
4. ClickSh are installation Image 4-3 Removal of pre-mounted screws 3. Install the mounting brackets to the Bas e Unit as shown on im age 4-2. Drive in the four removed Pan Head T10 M3 screws to secure the brack e ts to the B ase Unit . 4. Insert a plug in each hole (if needed and depending on the ceiling type) and drive in the 4 moun ting screws.
4. ClickSha re inst allati on Image 4-4 Removal of pre-mounted screws 2. Place the Base Unit on the rack mount and drive in the four removed Pan Head T10 M3 screws. Refer to “1” on image 4-5. 3. Fasten the antenna to the front panel of the rack mount.
4. ClickSh are installation 4.6 Recommendations about an tenna placement and orientation Antenna placement r ules • The antennas should be oriented vertically , so perpendicular to the ceiling and parallel to the w alls. • The antennas should be installed far enough (at least 50cm/1.
4. ClickSha re inst allati on 1 Image 4-7 Display cables connection Note: Display cables are not included in the ClickShare box at purchase. Supported types of displays are: - Single Link D V I -D i s.
4. ClickSh are installation 4.8 Audio connection About audio The ClickShare Button captures the audio o utput of the user ’s laptop and sends it to the Base U nit together with the video signal. The B ase Unit will then mix the audio signals from all Buttons that are sharing their content.
4. ClickSha re inst allati on How t o connect 1. Insert a network c able with RJ-45 connector into the LAN port. Image 4-10 LAN connection 2. Connect the other side to a LAN. 4.10 Power connection and switching on W ARNING : Use a power cord which compli es to local regulati ons.
4. ClickSh are installation European version T ype C and typ e G Japanese version T yp e A Chinese version T yp e I CCC North America n version T ype A 2. T o pow er on the unit, set the rocker switch to “1”. If the B ase unit does not start up automatically , use the standby button.
4. ClickSha re inst allati on Only 1 iOS device and ClickShare Link combination allowed per ClickShare base U nit. Mul tiple iOS device can be used when using the ClickShare A pp. Connection v ia cable 1. Connect a USB cable between the ClickShare Link USB port and one of the backside USB ports of the Base Unit.
4. ClickSh are installation USB USB DVI HDMI Apple T V iPad ClickShare Link ClickShare Base Unit Image 4-18 Wirele ss iPad connection 2. Connect a n HD MI to DVI video cable to the DV I input of the C lickShare Link or place the convertor from DVI to HD MI on the ClickShare Link and connect an H DMI c able.
4. ClickSha re inst allati on In this example, we will connect to the wireless network of the Base Unit. I f you want to use a different network, please contact your IT administrator . - Go into the Apple TV main m enu and connect to the ClickShare Base Unit WiFi (IP addres s = 192.
4. ClickSh are installation - Return to the Home page of the Apple TV . Image 4-28 - Calibrate the ClickShare Link to the Apple TV menu by going into the ClickShare B ase Unit web interface. By calibrating the Link, we make sure that the Apple T V menu is not shown in the ClickShare com position.
4. ClickSha re inst allati on Image 4-30 4.12 About Network integration Introduction The ClickShare network integration option is aimed at deploying Cli ckShare in larger organizations without interfering with the ex- isting wireless network infrastructure.
4. ClickSh are installation •T h e fi rst and foremost one in case of a typical corporate network setup is WP A2-Enterprise with 802.1X . • As we also want to support smaller organizations which might have a more traditional W i-Fi setup, there is also support for WP A 2-PSK also know n a s WP A2- Per sonal .
4. ClickSha re inst allati on Setu p Due to the var iety of options and complexity of the setup we have created a wizard in the C lickShare Web interface. This wizard will guide you through the process based on the security mode you s elect. For mo re information about the setup, s ee c hapter "6.
5. Preparing the butto ns 5. PREP ARING THE BUTTONS Overview • Pairing • Pre-install of the Launcher service • ClickShare launcher installer • ClickShare for Linux 5.1 Pairing Pairing of the Buttons with t he Ba se Unit T o be able to use a Button it should be assigned to the Base Unit you are using.
5. Preparing the but tons Both the LEDs o f the Button and the LEDs of the Ba se Unit are blinking white. This means pairi ng is in progress. The Base Unit automatically ch ecks whether the s oftware of the Button is up to date. If not, the Base Unit updates the B utton software.
5. Preparing the butto ns Where to download the la uncher installer? The launcher s ervice (installer) can be downloaded from the Bas e Unit when entering the webui. Go to Maintenance > Software and download the launcher service. Image 5-5 Downloads software 5.
5. Preparing the but tons Parameter Description AC- CEPT_EULA This parameter sh ows that the installer accepts the EU LA text as is. This parameters m ust be set to Y ES in order to continue to the installation. INST ALLDIR This parameter speci fi es the installati on directory for ClickShare launcher.
5. Preparing the butto ns Image 5-8 Image 5-9 After installation it is advised to log out and in again to fi re up the background process. Fedora installation T o be able to install ffmpeg, you will need to enable the rpmfusion repository by executing this c omm and: rpm -Uvh http://download1.
5. Preparing the but tons Image 5-10 Click Install . 40 R5900004 CLICKSHA RE 23/12/2014.
6. Web Inter face 6. WEB INT ERF ACE Overview • Accessing the ClickShare Web Interface • Language setup Web interface • About C lickShare tabs • Basic settings • W a llpaper (background) se .
6. Web Int erface 2. Browse to the I P address you can fi nd in the top left c orner of the ClickShare welcome screen. Note: The Wired IP address is only visible when th e Base Unit is connected to the LAN. A login screen appears. 3. Enter the user name ’admin’ and the password and click OK .
6. Web Inter face 6.2 Lan guag e setup Web inte rface About la nguages The ClickShare web interface can be displayed in dif ferent languages. The following languages are possible: • Arabic •S i m .
6. Web Int erface Image 6-3 T ab pages 1 Main tab bar 2 Sub tab bar 3 Information and fi ll out pane 6.4 Basic set tings About Ba sic settings The basic settings contain the following information: • Meeting room name • Meeting room location • Welcome m essage T o change the bas ic settings 1.
6. Web Inter face Image 6-4 Setup, basic settings The Basic tab is displayed by default. 3. In the Ide nti fi cation section click in an input fi eld and enter - the nam e of the m eeting roo m - the location of the meeting room - a welcome m essage wh ich will be displayed below the meeting room n ame and location.
6. Web Int erface Image 6-5 A message is displayed to indicate that the changes are successful. The new nam e, location and welcome message are displayed in the left top corner of the screen. 6.5 W al lpape r (b ackgrou nd) sele ction About wallpaper When ClickShare starts up, a background (wallpaper) is displayed.
6. Web Inter face Image 6-6 Wal lpaper selectio n 3. Select one of the available wa llpapers (3). Note: By default a general Barco C lickShare wallpaper and a ClickShare Quick Start Guide w allpapers are a vailable. They are automatically resized t o fi t the aspect ratio of the screen.
6. Web Int erface When 2 screens are co nnected, an extra item Show Displ ay Identi fi ers appears in the D isplay pane. Wh en checked, a sequence numb er is displayed on each display .
6. Web Inter face Image 6-9 Add wallpaper The Wall pap er tab page is displayed. 3. In the Background wallpapers pane, click on the “ + ”s i g n( 3 ) . A bro wser w indow opens. 4. Select the d esired fi le (4) and click Open (5). The content of the fi le is checked and when valid (format and size), the fi le is uploaded (6).
6. Web Int erface • Resolution of the display can be set. T o chang e 1. Log in t o the ClickShare web interface. 2. Click the Se tup tab (1) and then the Display tab (2 ). The content of the Display tab is shown. The fi rst pane s hows the Display Settings .
6. Web Inter face About Dis p lay mode Exte nded m ode 2 users 1 2 Image 6-11 The content of multiple users will be divided over b oth screen. Clone mode 2 users 12 12 Image 6-12 The content of m ultiple users will be shown on one screen. T he content of that fi rst screen will be duplicated on th e second screen.
6. Web Int erface Image 6-13 Output ports Display Timeout If there is no input signal detected during the display timeou t period, both outputs are set to blank. The display timeout can be set by moving the slider to the left or r ight until the desired delay is reached.
6. Web Inter face 6.9 On-s creen text for mat About on-screen tex t The language of the on -screen messages can be changed. A lso the color , size and style of the m essages can be updated. The background color and the transparency can be adapted s o that they match with the text layout.
6. Web Int erface The following languages are possible: - Arabic - Simpli fi ed Chinese - Tradit ional Chinese -D a n i s h -D u t c h - English - Finnish - French -G e r m a n - Italian - Japanese - Korean - Norwegian - Portuguese - Ru ssian - Spanish - Swedish Te x t c o l o r 1.
6. Web Inter face Image 6-17 Background color 2. Drag the marker i n the color bar up or down until the desired color is obtained (2). 3. T o change the tint of the selected c olor , drag the circler marker in the square unti l the desired tint is obtained (3).
6. Web Int erface Image 6-19 Audio settings How to change 1. Log in t o the ClickShare web interface. 2. Click the Setup tab and then the Audio tab. 3. T o enable audio on the B ase Unit, check the check box next to Enable Audio Functionality . Note: Changing the audio setting, requires a re-pairing of the Buttons.
6. Web Inter face Image 6-20 Integra tion, Polycom 3. T o enable Polycom integration, check th e check box next to Enable Polycom Integration (3). The user is aske d to fi ll in the IP address or hostname (5) of the target Polycom unit together with the T e lnet port 1 (6) that allows sending A PI commands.
6. Web Int erface 6.12 Corporate network, act ivation Start up Due to the com plexity of the ClickShare N etwork Integration feature, you must activate it fi r st. T o activate, go to the C orporate Network tab and click on the button which brings you to a request page.
6. Web Inter face strictly required by the standard it is m andatory in most im plementations including for C lickShare. When impleme nted using client certi fi cates, EAP-TLS is considered one of the m ost secure EAP methods.
6. Web Int erface The E AP -TLS mode w indow opens. T wo choices are possible: - Auto alignment via S CEP - Manually provide Client & CA certi fi cate s Using SCEP Select the radio b utton next to Auto enrollment via SCEP an d click Next .
6. Web Inter face Identity Identity of t he user accou nt in the A ctive Directory which will be used by the ClickShare B uttons to connect to the corporate n etwork. When using EAP-TLS make sure that the necessary mapping exists between the Client Certi fi cate issued by y our CA and this user account.
6. Web Int erface Image 6-26 Click Upload Client Certi fi cate . The client certi fi cate you provide should be signed by the authoritative root CA in your domain and should be linked to the user you specify in the Identity fi eld.
6. Web Inter face How to sta rt up for EAP-TTLS 1. Log in t o the ClickShare web interface. 2. Click the Setu p tab (1) and click Corporate Network (2). Image 6-27 Corporat e network, EAP-TTLS 3. Click Start Wizard (3) t o start up the co n fi guration process.
6. Web Int erface The E AP -TTLS mode window opens. Necessary Data to continue: Domain The company domain for which you are enrolling, should match with the one de fi ned in your Active Direc tory . Iden tity Identity o f the user account in the Active D irectory which w ill b e used by the ClickShare Buttons to connect to the corporate network.
6. Web Inter face Image 6-28 Corporat e network, PEAP 3. Click Start Wizard (3) t o start up the co n fi guration process. The Sec urity Mode selection window opens ( 4).
6. Web Int erface The P EA P mode window opens. Necessary Data to continue: Domain The company domain for which you are enrolling, should match with the one de fi ned in your Active Direc tory . Iden tity Identity o f the user account in the Active D irectory which w ill b e used by the ClickShare Buttons to connect to the corporate network.
6. Web Inter face Image 6-29 Corporat e network, WP A2-PSK 3. Click Start Wizard (3) t o start up the co n fi guration process. The Sec urity Mode selection window opens ( 4). 4. Select the radio button next to W P A2-PSK (5) and click Next (6). The W P A2-PSK mode window opens.
6. Web Int erface 6.17 Securit y: HTTPS or HTTP access protocol About HTTP or HTTPS Hypertext Tr ansfer P rotocol Secure (HTTPS) is a co mm unications protocol for secure comm unication ov er the network with the ClickShare Bas e unit. The security is based on the underlaying security capabilities of SSL/TLS.
6. Web Inter face Image 6-31 HTTPS, generate certi fi cate A self s igned certi fi cate is created. T his certi fi cate is valid for 3 y ears. Click Apply to s witc h to the HT TPS co mm unic atio n (8 ). HTTPS via upload certi fi cate s Select the radio button next to Upload certi fi cate (6) and click Next to continue (7).
6. Web Int erface Image 6-32 HTTPS, upload SSL certi fi cate Click Up load SSL Certi fi cate (8) and select the certi fi cate in y our browser . Click op e n and then N ext . T he comm unication is switched to HTTP S. 6.18 Security : W eb User Interfa ce About a ccess T h ew e bi n t e r f a c ei sa l w a y sa c c e ssible via the Ethernet port.
6. Web Inter face Image 6-33 Access we b interface 6.19 Securit y: access SSH SSH is on ly for Barco service purpo ses. About SSH access SSH (S ecured Shell) is a n etwork pro tocol for secure data co.
6. Web Int erface 6.20 Security : Block sharing for Apps What can be done? Content sharing with mobile devices can be blocked. How to block 1. Log in t o the ClickShare web interface. 2. Click the Setup tab ( 1) and click Security (2). Image 6-35 Block content sharing 3.
6. Web Inter face 4. Select the current name and enter a new nam e. Note: The default hostname is “ClickShare-<serial number>”. 6.22 Advanced set tings: LAN network settings About LAN networ k se ttings A netw ork connection can be con fi g ured through DHCP or by manually entering a fi xed IP address.
6. Web Int erface Image 6-38 Fixed IP address The Advanced tab is displayed. 3. Check the radio button nex t to Fixed address (3 ) . The IP address, subnet and gateway input opens . 4. Click in the input fi eld of the IP address and fi ll out the 4 fi elds.
6. Web Inter face Image 6-39 WiFi settings 3. Enter a public name (SSID) for the wireless network. The default SSID is ClickShare-<serial base nu mber> . 4. If you w ant to br oadcast this S SID, check the chec kbox behind Broadcast S SID . 5. Enter a new pas sword and c on fi rm that password.
6. Web Int erface Image 6-40 Enable A PI 6.25 Advanced settings: NTP setup About NTP NTP (network time protocol) allows to synchronize clock on a network. By using NTP , the internal c lock of the Base unit can be synchronized w ith a NTP server on t he network.
6. Web Inter face 6.26 Maintenance, stat us check ClickShare About status check The status tab w ithin M ainte nance gives an overview of • the LAN interface settings, • the W iFi settings, • System identi fi cat ion • Historical updates • Subsystem status •S e n s o r s • System management T o check the sy stem status 1.
6. Web Int erface Image 6-43 Detail associated devices System Managemen t Use the Restart System button to restart ClickShare. Use the Shutdo wn System button to shutdown ClickShare.
6. Web Inter face Image 6-45 Paired buttons, overvi ew The list gives an overview of the Buttons that hav e in the past been paired to this Base Unit. If a Button has in the meantime been paired to another Base Unit, it will s till appear in this list.
6. Web Int erface Image 6-46 The Button can be re move d from the list by clicking on Rem o ve Fro m List . ClickShare button manager By clicking o n Download (3), an XM L fi le is downloaded on the PC. This fi le contains all information abo ut the base unit to pair buttons on your PC instead o f on th e base unit itself.
6. Web Inter face Image 6-48 Link , ove rview The content of the Links tab is displayed. An overview of the con fi gured links is given with the following extra info of the Link: - The green LED indicates t hat the Link is connected. - Source name: can be changed to any name, just by clicking inside the input fi eld and entering a new name.
6. Web Int erface Image 6-49 Start calibration 3. Click Start Calib rati on . The c alibration process starts. A calibration m essage with progress bar is displayed o n the meeting room display . Use the Apple TV remote t o cycle through the top row of icons ( the row with Computers and Settings) on the home screen.
6. Web Inter face Image 6-50 Download page How to update 1. Download the latest version of the software from Barco’ s website. 2. Log in t o the ClickShare web interface. 3. Click the Maintenance tab (1) and then click Softwa re (2). Image 6-51 Update so ftware The content of the Software tab is displayed.
6. Web Int erface Once upgraded to software version 01.07 or higher it is not possible to d owng rade ag ain b elow version 1.07. Important notice for updating to software version 01.05 and above Please note that fi rm ware versions 01.04 and above are digitally signed to raise security level.
6. Web Inter face Image 6-54 Downloads software The content of the Software tab is displayed. 3. T o download the Launcher Service, for Windows, click on Download Windows Launcher or for Mac, click on Down loa d Mac Launcher .
6. Web Int erface Image 6-55 Manage system con fi guration The content of the Con fi gur ation tab is displayed. 3. T o download a full backup, click on Dow nload Full Backup (3). An xml fi le, containing all information and history will be do wnloaded.
6. Web Inter face How to r esto re factory defaul ts 1. Log in t o the ClickShare web interface. 2. Click the Mainte nance tab (1) and then click Con fi gurat ion (2). Image 6-56 Factor y defaults 3. Click on Load Defaul t Sett ings to return to the factory defaults (3).
6. Web Int erface The content of the P assw ord tab is displayed. Image 6-58 Password 3. Enter the old password (3). 4. Enter the new password (4). 5. T o con fi rm, enter the new password a second time (5). 6. Click Apply . The adm inistrator password is changed.
6. Web Inter face Image 6-59 Integra tor password 3. Enter the new password (3). 4. T o con fi rm, enter the new password a second time (4). 5. Click Apply . The integrator password is changed. 6.37 Log settings About l ogging Both Button and Base Unit log data is save d in log fi les on the Bas e Unit.
6. Web Int erface Image 6-60 Logging 3. T o create a debug log, c heck the check box next to Debug Logging (3). 4. Reproduce the issue you want to report. 5. T o download the current log fi le, click on Download Log (4 ). 6. T o clear the current log fi le, click C lear Log (5).
6. Web Inter face Image 6-62 The content of the C ontact tab is displayed. The Contact page contains a link to the ClickShare home page on B a rco’s website (3). 3. Click on the link Vi sit the Cl ickShare product page . 4. Click Downl oad s Image 6-63 All kind of manuals, brochures and s oftware updates can b e found on that page.
6. Web Int erface Image 6-64 EULA 3. If desired, click Save ... (3) to save a copy of the ag reemen t on your laptop. 4. In the File D ownload window , click Save . The Save as w indow opens. 5. Browse to the location where to store the E ULA fi le and click Save .
7. Softw are updates 7. SOFTW A RE UPDA TES 7.1 Software update About Software updates There are two ways to u pdate the Base Unit software: • via the Web Interface, for more information, see ".
7. Softwa re updates Image 7-1 Software downgrade: Image 7-2 94 R5900004 CLICKSHA RE 23/12/2014.
8. Trou bleshoot ing 8. TROUBLESHOOTING 8.1 T roubleshooting list Problem solving Locate the problem you are experiencing i n the table below and apply the solution.
8. Troub leshooti ng Probl em Cause Soluti on Low video per formance Laptop performance • Lower the screen resolution of the laptop. • Disable the hardware acceleration for video.
8. Trou bleshoot ing Probl em Cause Soluti on Base Unit does not start up correctly . A USB stick, ClickShare Button or another USB device is connected to one of i ts USB slots at start-up.
8. Troub leshooti ng Probl em Cause Soluti on An illegal W iFi channel is selected Browse to the A dvanced tab of the Web Interface and change the Frequency band and/or W iFi channel.
A. Environ mental informat ion A. EN VIRONMENT AL INFORMA TION A.1 Di spos al inf orm atio n Disposal Information W aste Electrical and Electronic Equipment This symbol on the product indicates that, .
A. Envir onmental inform ation 底架 Cha ssis x 0 x 000 电 源供 应 器 Power S upply Unit x 0 x 000 文件 说 明 书 Paper Manuals 000000 O: 表示 该 有毒有害物 质 在 该 部 件所有均 质 材料中 的含量均在 S J/T 1 1363-20 06 标 准 规 定的限量 要求以下 .
Index INDEX A About 3, 5, 8, 1 1, 13 Base Unit 8 But ton 1 1 ClickShare 3 Documentation 3 ClickShare product 5 Guide 3 T ray 13 Access S SH 71 Access web interface 70 Address 100 Antenna placement 23 .
Index N NTP setup 76 O On-screen text format 53 P Pairing Buttons 35 Password administrator 87 Change 87 Password integrator 88 Change 88 Pre-install 3 6 Launcher service 36 Product speci fi catio n .
Ein wichtiger Punkt beim Kauf des Geräts Barco ClickShare Link (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Barco ClickShare Link noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Barco ClickShare Link - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Barco ClickShare Link reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Barco ClickShare Link erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Barco ClickShare Link besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Barco ClickShare Link verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Barco ClickShare Link. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Barco ClickShare Link gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
