Benutzeranleitung / Produktwartung BeoCord V 8000 des Produzenten Bang & Olufsen
Zur Seite of 32
1 The BeoCord V 8000 videotape recorder features all the Bang & Olufsen qualities: Excellent sound and picture qualities, and simple and straightforward operation. The BeoCord V 8000 is designed to be used with BeoVision TVs constituting an elegant Bang & Olufsen Video system.
2 Before you start… Two user’s guides are enclosed with your BeoCord V 8000. A User’s guide which should be used, if V 8000 is combined with a BeoVision MX TV, and a User’s guide which should be used, if V 8000 is combined with a BeoVision MS TV.
3 4 Using this guide 5 Operating BeoCord V 8000 Beo4 remote operation, 5 BeoCord V 8000 close-up operation, 6 Using on-screen menus, 7 8 Daily operations Video playback, 8 10 Tuning and presetting Tun.
4 This illustration exemplifies the different types of information, presented in this guide. The section, marked a , gives you a step-by-step instruction of the operation in question. Section a includes: • The buttons you must press to complete the operation.
5 The Beo4 remote control is the key to all the functions in your BeoCord V 8000 videotape recorder: • Daily operations are carried out directly via the Beo4 remote control by pressing a single button, or by pressing a few buttons in a straight- forward sequence.
> Operating BeoCord V 8000 6 BeoCord V 8000 close-up operation The five buttons on the front of the BeoCord V 8000 allow you to operate some of the functions available in the BeoCord V 8000 … Note: The Beo4 remote control is a requirement for complete operation of the BeoCord V 8000.
Press to switch on the videotape recorder Press to call up the main menu for V.Tape The V.Tape main menu appears … Press to select V.Tape menu The V 8000 main menu appears … Press to select the it.
8 Press to start the videotape recorder – playback starts instantly Press to raise the volume Press to lower the volume Press right on the middle to silence the TV speakers – press again to recall.
9 Please note about Track step … In order to step through tracks on a tape, it is required that the tape was recorded with the marker function cut in. Please refer to Setting your options for V 8000, pages 14 – 15, for further instruction. If the track marker function is cut in, the start of each recording is automatically indicated.
Switch on BeoCord V 8000 and call up the V 8000 main menu! See page 7 for further instruction about calling up on-screen menus … Press to select SETUP Press to call up the setup menu The SETUP menu .
11 What ’ s on the TUNING menu … FREQUENCY Indicates the frequency of a station. Searching stops at the first station producing an acceptable signal. If this is not the station you want, just continue searching. If you wish, you can key in the exact frequency of a station instead, using the number keys on Beo4.
TV CHANNEL/FREQUENCY CONVERSION LIST 12 Italy Channel designation number On-screen display MHz A B C D E F G H H1 H2 53 62 82 175 183 197 201 210 217 224 Australia Channel designation number On-screen.
SETTING THE CLOCK 13 Switch on BeoCord V 8000 and call up the V 8000 main menu! See page 7 for further instruction about calling up on-screen menus … Press to select SETUP Press to call up the setup.
SETTING YOUR OPTIONS 14 Switch on BeoCord V 8000 and call up the V 8000 main menu! See page 7 for further instruction about calling up on-screen menus … Press to select SETUP Press to call up the se.
15 What ’ s on the OPTIONS menu … COUNTER The videotape recorder registers the position of the tape during playback and recording. This information is read out on the TV screen and on the videotap.
16 Press to switch on the videotape recorder Press to call up the V 8000 main menu Press to call up the Timer recording menu The TIMER RECORD menu appears … Press to move from item to item in the menu Press to reveal options for an item Use the number keys to key in values, e.
17 (from the previous page) Press to move between the days Press to exclude or include a day Once you have selected the days you want … Press to leave selection mode Press to store your weekly Timer.
> Recording 18 To record the current programme … Press to get ready for recording Press to start recording To record a TV programme while being able to watch another TV programme … Switch on to.
19 Please note about recording … • The Timer indication TIMER will appear in the BeoCord V 8000 display whenever one or more Timer recordings are waiting to be executed. If your BeoCord V 8000 is unable to execute a Timer recording, TIMER flashes on and off.
20 SPECIAL VIDEO FUNCTIONS Switch on BeoCord V 8000 and call up the V 8000 main menu! See page 7 for further instruction about calling up on-screen menus … Press to select SETUP Press to call up the.
21 Selecting sound track The current sound mode is displayed in the BeoCord V 8000 display, the following modes may be available: STEREO Hi-Fi sound track MONO Linear sound track MONO-1 Left sound channel (language 1) MONO-2 Right sound channel (language 2) Recordings are always made with both a Hi-fi and a linear sound track.
22 > Special video functions Load the appropriate tape, switch on BeoCord V 8000, and call up the V 8000 main menu! See page 7 for further instruction about calling up on- screen menus … Press to.
23 CAMCORDER CamCorder playback and r ecording In order to watch CamCorder recordings on your TV, and copy them onto a tape in V 8000, you have to connect the CamCorder, register the signal via the V 8000 main menu, and then start your CamCorder*.
24 ON-SCREEN STATUS DISPLAYS As soon as the BeoCord V 8000 starts carrying out your instructions, a small status display appears at the bottom of the TV screen. The status display shows what the videotape recorder is doing … The display prompts you to load a tape before you can start playback.
25 Please note: The displays remain on the screen of your TV, for a few seconds, during playback and recording. During winding and searching, the relevant display remains on the screen constantly or until the operation is completed. You have pressed STOP to stop the videotape recorder with a still picture on the screen.
26 Press to start the videotape recorder Press to raise the volume Press to lower the volume Press to mute the TV speakers – press again to recall the sound Press to play the next track Press to pla.
27 Operating on-screen menus with Beolink 1000 … In order to operate the BeoCord V 8000 on-screen menus, you must press MENU to call up the main menu for V.
OVERVIEW OF ON-SCREEN MENUS 28 LINK FREQUENCY 599 CLOCK TIME DA TE MONTH YEAR TEXT 20:00 MON 24 SEPTEMBER 1995 OFF PROGRAM FINE SUBTITLES 10 FREQUENCY 210 0 333 SOUND STEREO 1 : SET V .
29.
30.
31.
32 Date purchased Contact person Dealer Telephone Address Record your serial numbers here: BeoCord V 8000 Beo4 remote control 3508189 1990 Printed in Denmark by Bogtrykkerg å rden a-s, Struer Dear Cu.
Ein wichtiger Punkt beim Kauf des Geräts Bang & Olufsen BeoCord V 8000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bang & Olufsen BeoCord V 8000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bang & Olufsen BeoCord V 8000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bang & Olufsen BeoCord V 8000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bang & Olufsen BeoCord V 8000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bang & Olufsen BeoCord V 8000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bang & Olufsen BeoCord V 8000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bang & Olufsen BeoCord V 8000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bang & Olufsen BeoCord V 8000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
