Benutzeranleitung / Produktwartung TMR-BT10 des Produzenten Sony
Zur Seite of 24
Portable Stereo Transmitter 2-698-600- 11 (2) Operating Instructions TMR-BT10 ©2006 Sony Corporation.
2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 Table Of Contents W elcome! .......................... 4 3 steps to BLUETOO TH function ................................. 5 Location and Function of Pa rts ............................... 6 Charging the unit ............. 7 P airing ................
4 Welcome! Thank you for purchasing this Sony Portable Stereo Transmitter. This unit uses BLUETOOTH™ wireless technology. This unit can transmit stereo audio signal to a BLUETOOTH stereo audio receiving device (headset, car audio unit, stereo component system, etc.
5 3 steps to BLUETOOTH function In the example below, we explain how to transmit music played on your audio device connected to this unit and listen to music on a BLUETOOTH stereo audio receiving device (headphone, stereo audio system, etc.). Pairing Enables a BLUETOOTH stereo audio receiving device and this unit to recognize one another.
6 Location and Function of Parts GETTING STARTED 1 Initialize button 2 Indicator (red) Indicates the power status of the unit. 3 Indicator (blue) Indicates the communication status of the unit. 4 POWER button 5 Audio in plug (Gold- plated L-shaped stereo mini plug) Connects to the headphone jack of a portable audio player, etc.
7 1 Connect the supplied AC power adaptor with the battery charging stand. 2 Connect the supplied AC power adaptor to an AC outlet. Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time.
8 Status Full Mid Low (needs to charge) Approx. usage hours 11 hours Usage hours * Status Music playback time (up to) * Time stated above may vary, depending on ambient temperature or conditions of use. Checking the remaining battery When pressing the POWER button while the unit is turned on, the indicator (red) flashes.
9 Pairing Continued What is pairing? BLUETOOTH devices need to be “paired” with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases: • When pairing information is deleted after repair, etc.
10 3 Set the BLUETOOTH receiving device to pairing mode. This unit searches the BLUETOOTH receiving device automatically, and pairs the device. The unit tries to connect the BLUETOOTH receiving device soon after detecting it.
11 Indications of BLUETOOTH function B : Indicator (blue) R : Indicator (red) Status Flashing patterns Pairing B – – – – – – – – ... R – – – – – – – – ... Connecting B – – – – – – – – – – ... R – Listening B – – – – – – – – – – – – .
12 Check the following before operating the unit. – Pairing of this unit and the BLUETOOTH receiving device is complete. – The BLUETOOTH receiving device is on standby for connection. – The BLUETOOTH receiving device supports the receiving music function (profile: A2DP).
13 • BLUETOOTH connection of this unit is established with A2DP (Advanced Audio Distribution Profile)* • For details on how to operate the BLUETOOTH receiving device, refer to the operating instructions supplied with the device. * For details on profiles, see page 17.
14 Disposing of the unit For environmental conservation, be sure to remove the built-in rechargeable battery from the unit before disposing, and dispose of the battery appropriately. ADDITIONAL INFORMATION 1 Remove 2 screws. 2 Open the case and detach the connector.
15 Precautions On BLUETOOTH communication • BLUETOOTH wireless technology operates within a range of about 10 m (about 30 ft). Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or electromagnetic environment. • The following conditions may affect the sensitivity of BLUETOOTH communication.
16 Notes on using in a car • Do not attempt to connect this unit, or to operate this unit, an audio output device or a car radio while driving or waiting at a traffic signal. • Make sure this unit and the device connected to this unit are fixed firmly before driving to avoid an accident or damage.
17 What is BLUETOOTH technology? BLUETOOTH wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer or digital camera. BLUETOOTH wireless technology operates within a range of about 10 m (about 30 ft).
18 Troubleshooting If you run into any problems using this unit, use the following checklist. Should any problem persist, consult your nearest Sony dealer. Cannot make the BLUETOOTH connection. , Check that this unit is turned on. , Check that the BLUETOOTH connecting device is turned on and the BLUETOOTH function is on.
19 When listening to music No sound , Check the connection between this unit and the stereo audio source device connected to this unit. , Check that both this unit and the BLUETOOTH stereo audio receiving device are turned on.
20 Initializing the unit You can reset this unit to its default (such as volume setting) and delete all pairing information. 1 If this unit is turned on, press and hold the POWER button for about 3 seconds to turn off this unit. 2 Press and hold the POWER button and the initialize button together for about 7 seconds.
21 Specifications General Communication system BLUETOOTH Specification version 2.0 Output BLUETOOTH Specification Power Class 2 Frequency band 2.4 GHz band (2.
.
.
Printed in Malaysia.
Ein wichtiger Punkt beim Kauf des Geräts Sony TMR-BT10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony TMR-BT10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony TMR-BT10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony TMR-BT10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony TMR-BT10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony TMR-BT10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony TMR-BT10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony TMR-BT10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony TMR-BT10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
